Timeline
06/10/14:
- 19:21 Ticket #2753 ("To" keyword incorrectly parsed in COM object) closed by
- Duplicate: Duplicate of #2731
- 13:45 Ticket #2752 (AutoIt Help omits the precedence of the ternary operator) closed by
- Rejected: Rejected - for explanation see http://www.autoitscript.com/trac/autoit/ticket/2750#comment:4
- 13:44 Ticket #2750 (Ternary Operator Should Have the Lowest Precedence) closed by
- Rejected: Much clearer thanks. Personally I do not regard the ternary operator as a true operator, more as a condensed If (in fact it replaced the _IIf UDF). So I not believe that it has a precedence as such and the use of parentheses to make sure that the various expressions within the ternary operator are correctly parsed is entirely proper and necessary. I would consider it a parallel with the requirement to use parentheses with Not on occasion to ensure that only the correct element is affected. We clearly say in the Help file: […] This remark was added to cater for cases where operator precedence needed to be specified - such as the one you have mentioned above. Furthermore, I fail to see why not having parentheses would produce "less confusion" - to my mind it is very likely to create more as the various elements of the ternary syntax become less distinct. So I am rejecting this request. M23
- 10:52 Ticket #2753 ("To" keyword incorrectly parsed in COM object) created by
- The "To" keyword is incorrectly parsed when used as a COM object …
- 00:17 Ticket #2752 (AutoIt Help omits the precedence of the ternary operator) created by
- The page "Language Reference - Operators" in the AutoIt Help fails to …
06/09/14:
- 22:03 Ticket #2751 (SampleControls.au3 - proposal) closed by
- Completed: Added by revision [10217] in version: 3.3.13.0
- 21:34 Ticket #2748 (_WinAPI_SaveHBITMAPToFile in WinAPIGdi.au3 is bugged) closed by
- Fixed: Fixed by revision [10211] in version: 3.3.13.0
- 21:34 Ticket #2751 (SampleControls.au3 - proposal) created by
- Proposal added #Region and GUICtrlSetTip() some other minior changes.
- 21:22 Ticket #2749 (COM Object Examples - proposal / fixed / question) closed by
- Fixed: Fixed by revision [10210] in version: 3.3.13.0
- 18:26 Ticket #2750 (Ternary Operator Should Have the Lowest Precedence) created by
- The ternary operator should have the lowest precedence in expressions. …
- 18:26 Ticket #2732 (ObjName - additional example proposal) closed by
- Completed: Added by revision [10208] in version: 3.3.13.0
- 17:45 Ticket #2749 (COM Object Examples - proposal / fixed / question) created by
- in getHTMLsource.au3 there is: […] instead […] fixed in …
- 15:26 Ticket #2746 (IE6Example.htm - Refreshing) closed by
- Fixed: Fixed by revision [10205] in version: 3.3.13.0
- 14:21 Ticket #2745 (HelpFile <> Official Site - Windows Compability) closed by
- Fixed: Fixed by revision [10203] in version: 3.3.13.0
- 12:28 Ticket #2738 (_WinAPI_ShellRestricted - $REST_ constants) closed by
- Fixed: Fixed by revision [10202] in version: 3.3.13.0
- 12:24 Ticket #2739 (_WinAPI_SetLocaleInfo - $LOCALE_ constants) closed by
- Fixed: Fixed by revision [10201] in version: 3.3.13.0
- 12:20 Ticket #2740 (_WinAPI_IsProcessorFeaturePresent - $PF_ constants) closed by
- Fixed: Fixed by revision [10200] in version: 3.3.13.0
- 12:16 Ticket #2741 (_WinAPI_DrawThemeEdge - $BDR_* , $EDGE_* , $BF_* constants) closed by
- Fixed: Fixed by revision [10199] in version: 3.3.13.0
- 12:11 Ticket #2744 (ToolTip and GUICtrlSetTip - Requires IE5+) closed by
- Fixed: Fixed by revision [10198] in version: 3.3.13.0
- 12:03 Ticket #2737 (_WinAPI_ShellGetStockIconInfo - $SIID_ constants) closed by
- Fixed: Fixed by revision [10197] in version: 3.3.13.0
- 11:51 Ticket #2736 (DriveGetType , _WinAPI_SetWindowPos - constatns defined in ..) closed by
- Fixed: Fixed by revision [10196] in version: 3.3.13.0
- 10:17 Ticket #2742 (#Au3Stripper_Parameters=/RenameMinimum doesn't work) closed by
- Fixed: The indicated version is for AutoIt3 and there is no relation to the version of au3stripper. When running your script through Au3Stripper in SciTE, I got the following console output: […] This shows the error and the version. Anyway, there was indeed a typo in the lexing of the commandline which is now fixed in the current Beta version of Au3Stripper. Thanks for the report, Jos
- 08:04 Ticket #2747 (Nested ternary operator returns incorrect results) closed by
- No Bug: No bug here: you must use parenthesis to enclose the coumpound condition. […] Next time, please ask on the General Help forum to confirm bug status.
- 05:59 Ticket #2748 (_WinAPI_SaveHBITMAPToFile in WinAPIGdi.au3 is bugged) created by
- _WinAPI_SaveHBITMAPToFile may break as reported by SciTE's console: …
- 04:54 Ticket #2747 (Nested ternary operator returns incorrect results) created by
- This very simple code show the problem: Local $v1 = 0, $v2 = 2 Local …
06/08/14:
- 22:25 Ticket #2746 (IE6Example.htm - Refreshing) created by
- look in attachment
- 20:26 Ticket #2745 (HelpFile <> Official Site - Windows Compability) created by
- http://www.autoitscript.com/site/autoit/ […] …
- 20:22 Ticket #2744 (ToolTip and GUICtrlSetTip - Requires IE5+) created by
- http://en.wikipedia.org/wiki/Windows_XP#Networking_and_internet_functio …
- 17:27 Ticket #2743 (Hex($n, -1.#INF) crashes AutoIt) created by
- Reproducer is just the code: […] This is causing scripts to …
- 13:59 Ticket #2742 (#Au3Stripper_Parameters=/RenameMinimum doesn't work) created by
- I've tried the new Stripper and its /RenameMinimum parameter doesn't …
- 06:52 Ticket #2741 (_WinAPI_DrawThemeEdge - $BDR_* , $EDGE_* , $BF_* constants) created by
- in iFlag Parameters description please add $ before BF_* […] …
- 06:43 Ticket #2740 (_WinAPI_IsProcessorFeaturePresent - $PF_ constants) created by
- please add to remarks $PF_* constants require #include …
- 06:39 Ticket #2739 (_WinAPI_SetLocaleInfo - $LOCALE_ constants) created by
- please add to remarks $LOCALE_* constants require #include …
06/07/14:
- 17:47 Ticket #2738 (_WinAPI_ShellRestricted - $REST_ constants) created by
- please add to remarks $REST_* constants require #include …
- 17:43 Ticket #2737 (_WinAPI_ShellGetStockIconInfo - $SIID_ constants) created by
- please add to remarks $SIID_* constants require #include …
- 16:50 Ticket #2736 (DriveGetType , _WinAPI_SetWindowPos - constatns defined in ..) created by
- in _WinAPI_SetWindowPos.txt […] in DriveGetType.txt […] …
06/06/14:
- 15:30 Ticket #2642 (The function Hex() returns the wrong value) closed by
- No Bug: I am closing this ticket as there is no problem with Hex - the seemingly invalid returns are caused by the inadvertent use of doubles instead of integers as the argument. That is covered by this ticket: http://www.autoitscript.com/trac/autoit/ticket/2729 M23
- 06:15 Ticket #2733 (WM_SETCURSOR doesn't pass $wParam as handle after using GUICtrlSetCursor) closed by
- No Bug: In fact it does. But if you rad the MSDN doc it is the handle to the Windows not to the control
06/05/14:
- 23:26 Ticket #2735 (Error in helpfile) closed by
- Fixed: Fixed by revision [10192] in version: 3.3.13.0
- 21:49 Ticket #2735 (Error in helpfile) created by
- on page …
- 21:21 Ticket #2734 (_GUICtrlListView_GetGroupRect setting wrong member) closed by
- Fixed: Fixed by revision [10189] in version: 3.3.13.0
- 17:43 Ticket #2734 (_GUICtrlListView_GetGroupRect setting wrong member) created by
- _GUICtrlListView_GetGroupRect sets the member "Left" to $iGet. The …
06/04/14:
- 11:43 Ticket #2733 (WM_SETCURSOR doesn't pass $wParam as handle after using GUICtrlSetCursor) created by
- Here is an example that shows the problem: […] …
06/03/14:
06/02/14:
- 21:06 Ticket #2731 (AU3Check error on objects that contain properties with name (.To)) created by
- We have a function that uses the object CDO.Message. The below …
- 14:19 Ticket #2730 (SetError - Return Value - undefined ?) closed by
- No Bug: This has been discussed before between Jon and myself, with the conclusion being it should remain as is. I am closing the ticket as "no bug".
- 00:33 Ticket #2730 (SetError - Return Value - undefined ?) created by
- in parameters: […] This is no true or I personally do not …
06/01/14:
05/31/14:
- 18:25 Ticket #2729 (32-bit integers converted to doubles after division) created by
- Perhaps not everyone will agree with me, but I consider this a bug: …
05/30/14:
05/26/14:
- 18:07 Ticket #2728 (Getting a window handle from PID for more advanced programs) closed by
- No Bug: Ask on the Forum if you don't understand AutoIt please. The example works as is intended.
- 15:59 Ticket #2728 (Getting a window handle from PID for more advanced programs) created by
- http://www.autoitscript.com/wiki/FAQ#How_can_I_get_a_window_handle_when …
05/24/14:
- 23:59 Ticket #2725 (Problem printing help file with multiple examples) closed by
- Fixed: Fixed by revision [10141] in version: 3.3.11.6
05/21/14:
- 12:32 Ticket #2690 (Win..... Return Value Proposal.) closed by
- Fixed: Fixed by revision [10136] in version: 3.3.11.6
05/20/14:
- 23:39 Ticket #2691 (Bitshift is returning incorect results) closed by
- No Bug: Jchd is correct. Of course if you want to get 52534 then you can just change it to Int($number / 2^$bits)
- 23:13 Ticket #2713 (ByRef Copy Bug) closed by
- Duplicate: Replying to anonymous: > Is this connected to ticket 2502? Yes it is. I hadn't realised this had been looked at before (but it looks like the conclusion was similar (variable != r-value, and byref might use either, or might not). I'll close this as a duplicate. If you want to guard against this, then just force it to copy by writing to the array: […]
- 23:02 Ticket #2727 (optional Datatypes) closed by
- Wont Fix: You are correct that dynamic typing does incur a runtime overhead. However, you are wrong that this would be "static" typing, and that they would perform any better. You'd still need to (at runtime) check the type of the variable and then do something different depending on the type. The only difference between that and a variant is that the explicitly typed case would result in errors, rather than casting. I really like explicit typing. I am very fussy in compiled languages about type, you wouldn't even see me writing float f = 4.0; in C++. But there really isn't any point in it, or need for it, in an interpreted langauge like AutoIt. I hope this explains why I'm closing this. If you still have any questions then feel free to PM me on the forums.
- 20:04 Ticket #2727 (optional Datatypes) created by
- The fact that I could not even find one ticket about this probably …
- 18:26 Ticket #2714 (Help for GUICtrlCreateGraphic omits info for dynamic graphics.) closed by
- Rejected: Please adhere to the AutoIt standards for example creation. As it stands the example which was suggested is way beyond the scope of what the help file is intended for. Thanks.
- 18:24 Ticket #2705 (ObjCreate - without register anything) closed by
- Rejected: The feature according to a former dev is experimental and thus has no place in the official documentation. If or when this feature is stable then the appropriate changes will be made.
- 18:20 Ticket #2721 (_Array... - proposal) closed by
- Fixed: Fixed by revision [10135] in version: 3.3.11.6
- 14:24 Ticket #2724 (_WinAPI_CreatePen - doc) closed by
- Fixed: Fixed by revision [10134] in version: 3.3.11.6
- 12:42 Ticket #2726 (GUIListView, GUICtrlListView_GetGroupInfoByIndex) closed by
- Completed: Added by revision [10129] in version: 3.3.11.6
- 11:28 Ticket #2726 (GUIListView, GUICtrlListView_GetGroupInfoByIndex) created by
- I use listview in my autoit projects and i need to know the GroupID …
05/19/14:
05/18/14:
- 11:10 Ticket #2725 (Problem printing help file with multiple examples) created by
- When printing the help file for _Excel_RangeCopyPaste only the first …
05/17/14:
- 12:48 Ticket #1919 (Native IPv6 support) reopened by
- 12:38 Ticket #2722 (FileSelectFolder - XP Only - BUG) closed by
- No Bug: This is not a bug - the flags only work in XP as is explained in the Remarks: The new vista+ dialog style is used if possible, regardless of the Use New Dialog Style flag. With the vista dialog style the edit control and create folder buttons are always shown, ignoring the flags parameter The statement "XP Only" is quite correct - the flags only work in XP. M23
- 12:31 Ticket #2724 (_WinAPI_CreatePen - doc) created by
- based on AZJIO: …
- 08:04 Ticket #2720 (_ArrayBinarySearch - Wrong Description) closed by
- Fixed: Thanks, it was already fix for all _array in 3.3.11.6
- 07:16 Ticket #2723 (FileConstants.au3 and FileSelectFolder.txt) created by
- please add […] to FileConstants.au3 and I attach modified …
- 07:00 Ticket #2722 (FileSelectFolder - XP Only - BUG) created by
- in Parameteres in "flag" description: […] This is not true. It …
- 06:47 Ticket #2721 (_Array... - proposal) created by
- in _ArrayDisplay removed doubled word array "Displays a 1D or …
- 05:42 Ticket #2720 (_ArrayBinarySearch - Wrong Description) created by
- Now there is […] Proposal: […]
05/15/14:
- 23:33 Ticket #2719 ("Misc. functions Reference" - table - Function list) created by
- […] there is no AutoItSetOption / Opt in this table. But this …
- 20:04 Ticket #2716 (GUICtrlSetPos - Parameters proposal) closed by
- Completed: Added by revision [10127] in version: 3.3.11.6
- 06:41 Ticket #2718 (SplashOff - example proposal) closed by
- Completed: Changed by revision [10125] in version: 3.3.11.6
05/14/14:
- 23:33 Ticket #2718 (SplashOff - example proposal) created by
- current contents of the example: […] PROPOSAL: […] …
- 15:11 Ticket #2717 (AutoIt Constants include files) closed by
- Fixed: Fixed by revision [10121] in version: 3.3.11.6
05/13/14:
- 22:17 Ticket #2717 (AutoIt Constants include files) created by
- […] This is not true. What about: #include <InetConstants.au3> ??
- 21:44 Ticket #2716 (GUICtrlSetPos - Parameters proposal) created by
- look in Remarks: […] There is talk about Default keyword. …
- 21:09 Ticket #2715 (mistake in helpfile) closed by
- Fixed: Fixed by revision [10120] in version: 3.3.11.6
- 20:05 Ticket #2715 (mistake in helpfile) created by
- There is small mistake in comment in the example on page …
- 16:16 Ticket #2712 (RegDelete, RegRead and RegWrite operate on the wrong "keyname".) closed by
- No Bug
05/11/14:
- 09:59 Ticket #2714 (Help for GUICtrlCreateGraphic omits info for dynamic graphics.) created by
- See …
Note: See TracTimeline
for information about the timeline view.
