Valuater Posted September 19, 2006 Author Posted September 19, 2006 well sign me up , where do I donate...and if you deem there to be a minimum that would be sufficient...the program takes you to the donation screen...just make the donation... then you will recieve your Dev license by emailall automatically.... that is the original idea of the programjust give till it hurts... lol8)
Valuater Posted September 19, 2006 Author Posted September 19, 2006 (edited) well sign me up , where do I donate...and if you deem there to be a minimum that would be sufficient...a second thought...as stated on page #1 of the original postautomated registration and acceptance of payment. ( your paypal account )also....4 "Please Register as Developer" Until you are registered as a developer the $D_PayPal ( developers paypal site ) $D_Link ( developers blacklist ) $D_Mail ( developers email )are not valid, the built-in default values apply... leading you to Autoit's donation pageso... do you understand the use of this program "include"???Have you been testing XProTec to see just how it works???I notice you only have 6 posts thus far, here, however... you seem to have a good understanding of computers themselves(As i read your posts )8) Edited September 19, 2006 by Valuater
KingPin Posted September 19, 2006 Posted September 19, 2006 I apologize for not reading properly all of your post, I will post back after I clearly understand the full implications of using this script. I only dabble in true programming as some might call it, my bread and butter is more on the php / mysql end of things. however from what i see autoit can help me there, and using the IE.au3 I see some very good things I can do to make my life easier and maybe of some clients. No im not very or even atall fluent in doing much in Autoit yet the syntax is somewhat familiar with other things I do in a daily routine enough that I can cope with it. thank you. how do they say it ... post count doesnt matter... or was that size....(i believe godzilla was the exception....) ps. do previous hurts from the battlefield of last weekend's local football count towards this hurting?.. I thought not but it doesnt hurt to check
Valuater Posted October 21, 2006 Author Posted October 21, 2006 Iv'e tryed the test on the page #1 i an error ocures "this Program has been interupted by a Fatal COM error"this script was tested this morning and worked fine... no one else has had a problem.?????dunno8)
Valuater Posted October 21, 2006 Author Posted October 21, 2006 COM+ Event SystemCOM+ System Applicationthis services is not running on my computer, it could be the problem?I'm not a COM expert, but i do beleive so8)
Tricky Posted January 19, 2007 Posted January 19, 2007 (edited) Gday Valuater, Xprotec looks like an excellent program.....and as Im developing a new application currently in beta test I am looking for "options" After the weeks writing my program I appreciate the hours, days, weeks to get a project to completion. I have without hesitation made an aussie dollar donation, about $26 aus and hope to gain developer status for xprotec and other autoit utilities... Keep up the good work Regards from down under.... Edited January 22, 2007 by Valik Don't be obnoxious and post in non-default colors.
nuusoft Posted January 25, 2007 Posted January 25, 2007 Does paying say $5 to webhosting plan entitles you to a developer license? I tried that and I got a paypal notification of payment but no automated email with any developer license. Ideas? OR do I need to pay $20 to Jon for the developer's license?
Valuater Posted January 25, 2007 Author Posted January 25, 2007 Does paying say $5 to webhosting plan entitles you to a developer license? I tried that and I got a paypal notification of payment but no automated email with any developer license. Ideas?OR do I need to pay $20 to Jon for the developer's license?Welcome to the Autoit ForumsXProTec.au3 is designed to protect and get paid for your programsif you make the small donation to Autoit through your program... (with XProTec.au3)it will automatically give you a Registration number for a userand notify Jon by email ( as current developer) by paypaland notify me ( as current developer) by emailSo, when you are developer, you will recieve the paypal and developer emails... not Jon nor I8)
Valuater Posted January 27, 2007 Author Posted January 27, 2007 Hi, I was wondering how your program XProtect or whatever is called has its blacklist function work by just going to a listed website .txt file. I'd like to implement something into my program that has basically the same idea as that.My idea would be that I could have a txt file, called users.txt with a list of ALL the usernames that it will accept, and if the username isnt on there, you couldnt use it. Do you have any idea as to how to do this? I like the way your blacklist function works, thats why I am asking you.Please read the above post...and please dont PM me8)
nuusoft Posted January 27, 2007 Posted January 27, 2007 Welcome to the Autoit ForumsXProTec.au3 is designed to protect and get paid for your programsif you make the small donation to Autoit through your program... (with XProTec.au3)it will automatically give you a Registration number for a userand notify Jon by email ( as current developer) by paypaland notify me ( as current developer) by emailSo, when you are developer, you will recieve the paypal and developer emails... not Jon nor I8)If the developer license good for just that single program i.e. program name or ? or is can be used for other programs? I want to understand it so that I can determine the file name instead of locking it to 'test.exe' or something similar.Thanks
Valuater Posted January 27, 2007 Author Posted January 27, 2007 (edited) Clearly...XProTec can be used for any and ALL programs you wish... notice the 'NAME" in the function call$D_Program = "My_Program_Name" ; your program nameXProTec($D_Mail, $D_Program, $U_Price, $U_Trial, $U_License, $D_License, $D_PayPal, $D_Link, $U_Return)8) Edited January 27, 2007 by Valuater
luvmachine Posted January 29, 2007 Posted January 29, 2007 So I've read through all these posts :| And I know I'll prolly get the same quote from a previously mentioned post for my answer. . but here it goes: #include<XProTec.au3>; MUST BE AN INCLUDE $D_Mail = "developer@msn.com "; your email $D_Program = "register"; your program name $U_Price = "5.00"; the amount of money you wish to be payed by the user $U_Trial = "0"; amount of days for the trial period $U_License = "3"; 3 = one computer only - see license notes $D_License = "123456789"; developers license # $D_PayPal = "www.paypal.com/my account-link to paypal"; - paypal link $D_Link = "www.mywebsite.com/.../"; looks for "www.mywebsite.com/.../Blacklist.txt"; see Blacklist $U_Return = 1; pay or quit .... or $U_Return = 0; will return control to developer with @extended = 6 [Limited Freeware Option] XProTec($D_Mail, $D_Program, $U_Price, $U_Trial, $U_License, $D_License, $D_PayPal, $D_Link, $U_Return) MsgBox(0, "", "Register") I didn't change $D_Mail, $D_PayPal, or $D_Link because you said those will use the default till I'm registered for dev. Second, I have no clue if I need to change $D_License yet, I just assume I'm not supposed to because I don't know my number yet. So finally problem is this, when I compile this code and run it, I get my lovely tooltip that tells me to register as a Developer, I get a msgbox from XProTec asking me for my email address to register as a user. I don't get any pages popping up that would lead me to the donation page. Can you notice anything I'm doing wrong?
Valuater Posted January 29, 2007 Author Posted January 29, 2007 (edited) You are correct... $D_License will be given later You are not doing anything wrong When your script is started, you should get the "lovely" tooltip and the message box requesting your email as a "user" This is what is neat about this system...... You are seeing EXACTLY what the "end-user" will be seeing when starting "your" program. After you type-in your email address, you will immediately receive an email with the validation code to "use" the program... ( The developer will receive a copy of the email ) After 50% of the trial period is over the user will be notified that this is the trial period and will have the opportunity to register When the "trial" period is over, the user will be asked to pay or quit.... or the developer may wish to alloy the user to have the program with limited use if you click to "register" the program, you will be taken to Autoit's web-site donation page, if you make a donation you will be given a "registration" number ( just like the end user would get from you )..; and i will contract you with your developers license number ( because i get notified when you register... just like you will get as a dev ) as a dev, you wont need to give the end user anything... its all automatic .... note, also after you have registered as a dev, the tooltip will be removed 8) Edited January 29, 2007 by Valuater
luvmachine Posted January 29, 2007 Posted January 29, 2007 Thank you so much for the quick reply and all the help on the subject as with the program I can't wait to get started on using it. When I type in my email address it still doesn't send me an email with a link to donate or pop anything up However I am doing this from a machine at work and they might have some odd port restrictions going on here, so I'll give it another try from home.
luvmachine Posted January 30, 2007 Posted January 30, 2007 Thank you so much for the quick reply and all the help on the subject as with the program I can't wait to get started on using it.When I type in my email address it still doesn't send me an email with a link to donate or pop anything up However I am doing this from a machine at work and they might have some odd port restrictions going on here, so I'll give it another try from home.Okay, so went home, ran the exact thing I posted that you said had no issues. Made it register.au3, compiled, ran, tells me to enter my email address or restart, I enter my email address and click okay. Then nothing happens :|
Valuater Posted January 30, 2007 Author Posted January 30, 2007 (edited) The program name is "r" ???email *******king@*****If you read your email you will find your validation code***** after further research... Made it register.au3, compiled, ran, tells me to enter my email address or restart, I enter my email address and click okay. Then nothing happens :|2 emails recievedMon 1/29 6:09 PM Mon 1/29 6:07 PM**** no programs with the name of "register.exe" were found8) Edited January 30, 2007 by Valuater
Valuater Posted February 3, 2007 Author Posted February 3, 2007 hello Valuater,at the first, sorry for my bad english.I come from the nethelands :"> i want to translate Xprotec to dutch for my dutch programs.may i have the clean script to translate it to the dutch?cheers,Peter WillemsenYes!!! You may reveive the "clean script" for your programsThe same way everyone else recieves it8)
J0ker Posted February 12, 2007 Posted February 12, 2007 Well I have read all the posts and come to a conclusion that , the only thing I need is the " One computer only license". Can I set it up so there's only this protection and nothing more? ( No trial,paying method, no paypal, only a one computer license restriction)
Valuater Posted February 12, 2007 Author Posted February 12, 2007 (edited) Well I have read all the posts and come to a conclusion that , the only thing I need is the " One computer only license". Can I set it up so there's only this protection and nothing more? ( No trial,paying method, no paypal, only a one computer license restriction) Yes! #include<XProTec.au3> ; MUST BE AN INCLUDE $D_Mail = "developer@msn.com " ; your email $D_Program = "My_Program_Name" ; your program name $U_Price = "0" ; not needed $U_Trial = "0" ; not needed $U_License = "3" ; 3 = one computer only - see license notes $D_License = "123456789" ; developers license # $D_PayPal = "" ; not needed $D_Link = "www.mywebsite.com/.../" ; looks for "www.mywebsite.com/.../Blacklist.txt" ; see Blacklist comments XProTec($D_Mail, $D_Program, $U_Price, $U_Trial, $U_License, $D_License, $D_PayPal, $D_Link) ; your script starts here .............. That should do it... remember, it needs to be compiled!! 8) Edited February 12, 2007 by Valuater
J0ker Posted February 12, 2007 Posted February 12, 2007 (edited) Yep exactly what I wanted ! I have 2 questions about your program: 1. What happen if the user delete the xprotect.au3 file ? 2. Do I have to make something like that? or I dont need it for my script ? #include<XProTec.au3> $XLicense = XProTec("Blablah@aol.com","X-ProTec-test", "50.00", "10") If @error Then MsgBox(0, "Error " & @error, $XLicense & " " & @CRLF & "License Type = " & @extended) Exit Else MsgBox(0, "No Error " & @error, $XLicense & " " & @CRLF & "License Type = " & @extended) EndIf oÝ÷ ØÚ-¢yr¢w¢»ay¹ZrIb²Öîµú+z÷«Êaz»ax,2"ÚâyØjw]Ù趷z+Þ¶¨¥v¨º¯zÚ¢wâ®hjëh×6 $D_Mail = "****el77@hotmail.com" ; your email $D_Program = "Try" ; your program name Edited February 12, 2007 by J0ker
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now