Uploaded a new version of the SciTE4AutoIt3.exe v21.316.1639.1

[TheDcoder]

Thanks for the clarification @Melba23 and @mLipok.

@Melba23 SciTE4AutoIt3 is still part of AutoIt, albiet as a "Lite" version. The programs share the same core thus my doubt

[Jos]

I think that the current SciTE4AutoIt3 is still/again supporting WinXP with the latest SPx but this will be for sure the last one as the current new version of SciTE don't support WinXP anymore. 

 

[mLipok]

9 hours ago, Jos said:

I think that the current SciTE4AutoIt3 is still/again

officiall release or in the Beta direcotry.

[Jos]

The current Production version. 

I will not try to maintain compatibility going forward!  

Jos

[n3wbie]

While using Portable Version of SciTE i m encountering following error when i try to open config file.

attached screencapture for your reference.

Can you please provide help on how to solve the issue?

 

 

[Jos]

Sure...   So you have checked the details in that error message and found which of those 2 files isn't there?

Any specififics on where autoit3 and scite is located?

Oh ...and scite needs to be located as a subdirectory of autoit3!!!!!

Edited February 26, 2022 by Jos

[argumentum]

\your path\SciTE\SciTE.exe
\your path\AutoIt3.exe

if the folder structure is as above, I am sure it will work ( just as @Jos described in the prior post ) 

I also set the environment variable ( from a script. I run different older versions of AutoIt at times  )

SCITE_USERHOME=C:\full path of yours\SciTE\MyUserFolder

to let SciTE know to use that folder for the files it needs/creates

Edited February 27, 2022 by argumentum

[n3wbie]

5 hours ago, Jos said:

Sure...   So you have checked the details in that error message and found which of those 2 files isn't there?

Any specififics on where autoit3 and scite is located?

Oh ...and scite needs to be located as a subdirectory of autoit3!!!!!

I stand corrected I don't have autoit main dir before the sub dir of scite.

Thankyou soo much for such a fast response

Also thanks to @argumentum for pointing out the issue

[Jos]

5 hours ago, argumentum said:

I also set the environment variable ( from a script. I run different older versions of AutoIt at times  )

When running portable you probably want to avoid this setting and can simply use the #AutoIt3Wrapper_AutoIt3Dir to select the directory of the AutoIt3 version you like to work with for Run & Compile.  

Jos

[mLipok]

Where are defined actions for "Debug to console" and "Debug to MsgBox" ?

[Jos]

The definitions are in au3.properties as these are connected to file extension au3. 

[mLipok]

So this is in AutoItTools.lua 

function AutoItTools:DebugConsoleWriteAdd()
    local word = self:GetWord2()
    if word == "" then
        print("Cursor not on any text.")
        return
    end
    local word = word:gsub("\r", "")     -- replace quote by 2 quotes
    local word = word:gsub("\n", "")     -- replace quote by 2 quotes
    local word2 = word:gsub("'", "''")     -- replace quote by 2 quotes
    local line = editor:LineFromPosition(editor.CurrentPos) + 1
    editor:LineEnd()
    editor:NewLine()
--~     editor:AddText("ConsoleWrite('@@ (" .. line .. ") :(' & @min & ':' & @sec & ') " .. word2 .. " = ' & " .. word .. " & @CRLF) ;### Debug Console")
    local option = tonumber(props['debug.console.option'])
    if option == 3 then
        editor:AddText("ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : " .. word2 .. " = ' & " .. word .. " & @CRLF & '>Error code: ' & @error & '    Extended code: ' & @extended & ' (0x' & Hex(@extended)  & ')    SystemTime: ' & @hour & ':' & @min & ':' & @sec & @CRLF) ;### Debug Console" )
    elseif option == 2 then
        editor:AddText("ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : " .. word2 .. " = ' & " .. word .. " & @CRLF & '>Error code: ' & @error & '    Extended code: ' & @extended & ' (0x' & Hex(@extended) & ')' & @CRLF) ;### Debug Console" )
    elseif option == 1 then
        editor:AddText("ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : " .. word2 .. " = ' & " .. word .. " & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console" )
    elseif option == 0 then
        editor:AddText("ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : " .. word2 .. " = ' & " .. word .. " & @CRLF) ;### Debug Console" )
    elseif option == -1 then
        editor:AddText("ConsoleWrite('@@ (' & @ScriptLineNumber & ') :(' & @min & ':' & @sec & ') " .. word2 .. " = ' & " .. word .. " & @CRLF) ;### Debug Console" )
    end
    editor:LineDown()
    editor:Home()
end -- DebugConsoleWriteAdd()

and

function AutoItTools:DebugMsgBoxAdd()
    local word = self:GetWord2()
    if word == "" then
        print("Cursor not on any text.")
        return
    end
    local word = word:gsub("\r", "")     -- remove CR
    local word = word:gsub("\n", "")     -- remove LF
    local word2 = word:gsub("'", "''")     -- replace quote by 2 quotes
    local line = editor:LineFromPosition(editor.CurrentPos) + 1
    editor:LineEnd()
    editor:NewLine()
--~     editor:AddText("MsgBox(262144, 'Debug line ~" .. line .. "' , \'" .. word2 .. "\:' & @CRLF & " .. word .. ") ;### Debug MSGBOX" )
    local option = tonumber(props['debug.msgbox.option'])
    if option == 2 then
        editor:AddText("MsgBox(262144, 'Debug line ~' & @ScriptLineNumber, 'Selection:' & @CRLF & \'" .. word2 .. "\' & @CRLF & @CRLF & 'Return:' & @CRLF & " .. word .. " & @CRLF & @CRLF & '@error:' & @CRLF & @error & @CRLF & @CRLF & '@extended:' & @CRLF & @extended & ' (0x' & Hex(@extended) & ')') ;### Debug MSGBOX" )
    elseif option == 1 then
        editor:AddText("MsgBox(262144, 'Debug line ~' & @ScriptLineNumber, 'Selection:' & @CRLF & \'" .. word2 .. "\' & @CRLF & @CRLF & 'Return:' & @CRLF & " .. word .. " & @CRLF & @CRLF & '@error:' & @CRLF & @error) ;### Debug MSGBOX" )
    elseif option == 0 then
        editor:AddText("MsgBox(262144, 'Debug line ~' & @ScriptLineNumber, 'Selection:' & @CRLF & \'" .. word2 .. "\' & @CRLF & @CRLF & 'Return:' & @CRLF & " .. word .. ") ;### Debug MSGBOX" )
    elseif option == -1 then
        editor:AddText("MsgBox(262144, 'debug line ~' & @ScriptLineNumber, \'" .. word2 .. ":' & @CRLF & " .. word .. ") ;### Debug MSGBOX" )
    end
    editor:LineDown()
    editor:Home()
end -- DebugMsgBoxAdd()

I ask as I notice that there was only error reported to console and there was lack of extended.

So next questions araise:

How to use option=3 for console and option2 for msgbox ?
Is it possible to set them in some kind of config file ?

 

Edited March 1, 2022 by mLipok

[Jos]

1 hour ago, mLipok said:

How to use option=3 for console and option2 for msgbox ?
Is it possible to set them in some kind of config file ?

I am sure you can answer that one yourself when you take 1 minute to look at those functions.  

Spoiler

HINT: Look at how option is set in both functions.  

...and when it still isn't clear you can check au3.properties for the explanation:

Spoiler

## Debug Output Options (to permanent change your selection copy them to SciTEUser.Properties and change it there
# Debug MessageBox Option 2="All"  1="No @extended"   0="No @extended & @error".
debug.msgbox.option=0
# Debug Console Option    3="All"  2="No SystemTime"  1="No SystemTime & Return"  0="No SystemTime, Return & Error".
debug.console.option=1
# Debug Trace Option      3="All"  2="No SystemTime"  1="No SystemTime & Return"  0="No SystemTime, Return & Error".
debug.trace.option=1
 

 

Edited March 1, 2022 by Jos

[Jos]

I have made some changes to the AU3 lexer as it was reported that when adding a #ce after the #requireadmin, the rest of the script will be shown as block comment.
So I have made a couple of changes in the au3 lexer that will simply ignore everything after the first found #Directive so it doesn't get confused. Below the Before and After images of the Lexer output with the changes highlighted. The SciLexe.dll is available in the Beta directory and can be used with the SciTE v4.4.6.

Before:

After:

[mLipok]

@Jos can you share the testing script you was using on the screenshots?

[mLipok]

@Jos it looks like #Region #EndRegion highlighting is borken.

Previous/old version:

New version:

Edited March 16, 2022 by mLipok

[mLipok]

Also some issues with #CS #CE

Old:

New:

 

I mean code folding is borken and there is highlightment just after #comments-start

 

#comments-start
#comments-end

#comments-start

#comments-end

#cs
#ce

#cs documentation
#CE documentation
#CS documentation
some text
some text
#CE documentation

 

[mLipok]

I would also ask for new feature:
Could you add the same way of higlighting like for #Region..... #EndRegion..... but to all #AutoIt3Wrapper_*******

Something like:

#AutoIt3Wrapper_AU3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7

REMARK:
I use foreground color (because it is easy to show the concept) but I was thinking about background color.

 

 

#Region - User's functions
#EndRegion - User's functions

#AutoIt3Wrapper_UseX64=N
#AutoIt3Wrapper_Run_AU3Check=Y
#AutoIt3Wrapper_AU3Check_Stop_OnWarning=y
#AutoIt3Wrapper_AU3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7

 

EDIT:
The same feature request for:

#Au3Stripper_Parameters=
#Tidy_******=

 

 

But also would like to have this behavior:

 

for :

#Au3Stripper_Ignore_Funcs=

#Au3Stripper_Ignore_Errors_in_Funcs=

#Au3Stripper_Ignore_Variables=

 

 

Edited March 16, 2022 by mLipok

[Jos]

On 3/13/2022 at 3:56 PM, mLipok said:

@Jos can you share the testing script you was using on the screenshots?

Sorry missed this one:

; Comment block
#cs Level1
If 1 = 2 Then ;test
    ConsoleWrite("Yea right") ;test
EndIf
;~  #cs Level2
;~  ; multilevel directive is shown as comment
;~  #ce Level2
#ce Level1
#comments-start Level1
    ; comments
#comments-end   Level1

; Special
#AutoIt3Wrapper_Run_Au3Check=n
#Au3Stripper_AlwaysStrip_Off=1
; preprocessor
#RequireAdminaaa  #cs #ce ; This script requires full Administrative rights
#RequireAdmin ; This script requires full Administrative rights
#RequireAdminxxthe rest is considered a comment
#RequireAdmin  the rest is considered a comment
#include-once  the rest is considered a comment
#include <Array.au3>
#NoTrayIcon  the rest is considered a comment
#OnAutoItStartRegister "Example"
; Any Unknown preprocessor
#whatever directive you use
; Lexing bug
#RequireAdmin #cs  Admin #ce ; <=====  Causing the rest of the code to be wrongly colored
If 1 = 2 Then ;test
    ConsoleWrite("Yea right") ;test
EndIf

Could you post the source for the posted issues so I can have a look?

I will work down you multiple post one at a time so I can keep the issues separate.  

[mLipok]

 

1 hour ago, Jos said:

Sorry missed this one:

Thanks.
  

1 hour ago, Jos said:

Could you post the source for the posted issues so I can have a look?

Already posted above.

But no problem to post again:

#comments-start
#comments-end

#comments-start

#comments-end

#cs
#ce

#cs documentation
#CE documentation
#CS documentation
some text
some text
#CE documentation

and

#Region - User's functions
#EndRegion - User's functions

#AutoIt3Wrapper_UseX64=N
#AutoIt3Wrapper_Run_AU3Check=Y
#AutoIt3Wrapper_AU3Check_Stop_OnWarning=y
#AutoIt3Wrapper_AU3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7

 

 

1 hour ago, Jos said:

I will work down you multiple post one at a time so I can keep the issues separate.  

Good idea.