Jump to content

EmailConfig.au3 UDF - support topic

mLipok

By mLipok,
in AutoIt Projects and Collaboration

 Share

Recommended Posts

mLipok Universalist

mLipok

Posted
Posted (edited)

This UDF was created to facilitate the saving and reading of email configuration.
Thanks to @water, @jchd, @Jos for helping in translation of _EmailConfig_GUI_Preset_**()
Hope to have _EmailConfig_GUI_Preset_ES() version soon.

If you want to create your national version of _EmailConfig_GUI_Preset_**() please do not hesitate ... contribute.

_EmailConfig_GUI_Preset_EN() is translated by me and Google Translator (from my national Polish language), so if you have any fix for this please do not hesitate ... contribute.

 

The EmailConfig_Example_STMP_Mailer.au3   is using modified version of Jos SMTP Mailer UDF

  

#AutoIt3Wrapper_UseX64=N
#AutoIt3Wrapper_Run_AU3Check=Y
#AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 -w 7
#Tidy_Parameters=/sort_funcs /reel

#include <Array.au3>
#include <AutoItConstants.au3>
#include <ButtonConstants.au3>
#include <ComboConstants.au3>
#include <Crypt.au3>
#include <EditConstants.au3>
#include <File.au3>
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>

#include "EmailConfig.au3"
#include "GDPR.au3" ; https://www.autoitscript.com/forum/files/file/509-gdpr/

Global $oMyRet[2]

#Region - EXAMPLE
_MY_EXAMPLE__EmailConfig()

Func _MY_EXAMPLE__EmailConfig()
    _GDPR_Crypter_Wrapper(_EmailConfig_ExampleCrypter)

    _EmailConfig_GUI_Preset_EN()
;~  _EmailConfig_GUI_Preset_DE()
;~  _EmailConfig_GUI_Preset_FR()
;~  _EmailConfig_GUI_Preset_NL()
;~  _EmailConfig_GUI_Preset_PL()

    _EmailConfig_SaveWrapper(_EmailConfig_SaveToINI)
    _EmailConfig_LoadWrapper(_EmailConfig_LoadFromINI)
    _EmailConfig_LoadWrapper()

    If $IDYES = MsgBox($MB_YESNO + $MB_TOPMOST + $MB_ICONQUESTION + $MB_DEFBUTTON1, 'Question #' & @ScriptLineNumber, _
            'Do you want to set email configuration ?') Then
        _EmailConfig_ShowGUI()
    EndIf

    Local $s_ToAddress = 'whereisyourdestination@your.email.com'
    Local $s_Subject = 'Testing email sending : ' & @YEAR & @MON & @MDAY & ' ' & @HOUR & @MIN & @SEC
    Local $s_Body = 'This is only a test'
    Local $s_Attachments = ''
    _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments)
EndFunc   ;==>_MY_EXAMPLE__EmailConfig

Func _EmailConfig_ExampleCrypter($dBinaryData, $bDataAlreadyEncrypted)
    _Crypt_Startup()     ; Start the Crypt library.
    Local $dResult
    If $bDataAlreadyEncrypted Then
        $dResult = _Crypt_DecryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Decrypt the data using the generic password string. The return value is a binary string.
    Else
        $dResult = _Crypt_EncryptData($dBinaryData, 'securepassword', $CALG_AES_256) ; Encrypt the text with the new cryptographic key.
    EndIf
    _Crypt_Shutdown()     ; Shutdown the Crypt library.
    Return $dResult
EndFunc   ;==>_EmailConfig_ExampleCrypter

#EndRegion - EXAMPLE

;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance = "Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0)
    Local $oCOM_Error_Handler = ObjEvent("AutoIt.Error", "MyErrFunc")
    #forceref $oCOM_Error_Handler

    Local $objEmail = ObjCreate("CDO.Message")
    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress
    Local $i_Error = 0
    #forceref $i_Error
    Local $i_Error_desciption = ""
    #forceref $i_Error_desciption
    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject
    If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
        $objEmail.HTMLBody = $as_Body
    Else
        $objEmail.Textbody = $as_Body & @CRLF
    EndIf
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~          ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                SetError(1)
                Return 0
            EndIf
        Next
    EndIf
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 Then $IPPort = 25
    $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ; Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    ; Set security params
    If $ssl Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
    If $tls Then $objEmail.Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendtls") = True
    ; Update settings
    $objEmail.Configuration.Fields.Update
    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch
    $objEmail.Fields.Update
    ; Sent the Message
    $objEmail.Send
    If @error Then
        SetError(2)
        Return $oMyRet[1]
    EndIf
    $objEmail = ""
EndFunc   ;==>_INetSmtpMailCom

Func _SMTP_SendEmail_Example($s_ToAddress, $s_Subject, $s_Body, $s_Attachments)
    #Tidy_ILC_Pos=120
    Local $aEMAIL_CONFIG = __EmailConfig__API()
    Local $SmtpServer = $aEMAIL_CONFIG[$EMAIL_CONFIG__22__SMTP_SERVER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE]        ; address for the smtp-server to use - REQUIRED
    Local $FromName = $aEMAIL_CONFIG[$EMAIL_CONFIG__02__COMMON_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE]               ; name from who the email was sent
    Local $FromAddress = $aEMAIL_CONFIG[$EMAIL_CONFIG__03__EMAIL_ADDRESS][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE]          ; address from where the mail should come
    Local $ToAddress = $s_ToAddress                                                                                    ; destination address of the email - REQUIRED
    Local $Subject = $s_Subject                                                                                        ; subject from the email - can be anything you want it to be
    Local $Body = $s_Body                                                                                              ; the messagebody from the mail - can be left blank but then you get a blank mail
    Local $AttachFiles = $s_Attachments                                                                                ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
    Local $CcAddress = ""                                                                                              ; address for cc - leave blank if not needed
    Local $BccAddress = ""                                                                                             ; address for bcc - leave blank if not needed
    Local $Importance = "Normal"                                                                                       ; Send message priority: "High", "Normal", "Low"
    Local $Username = $aEMAIL_CONFIG[$EMAIL_CONFIG__20__SMTP_USER_NAME][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE]            ; username for the account used from where the mail gets sent - REQUIRED
    Local $Password = $aEMAIL_CONFIG[$EMAIL_CONFIG__21__SMTP_PASSWORD][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE]             ; password for the account used from where the mail gets sent - REQUIRED
    Local $IPPort = $aEMAIL_CONFIG[$EMAIL_CONFIG__23__SMTP_PORT_NUMBER][$EMAIL_CONFIG__COL3_SAVELOAD_VALUE]            ; port used for sending the mail ; in many country port 25 is not recomended, in such case use 587 instead
    Local $ssl = 0                                                                                                     ; enables/disables secure socket layer sending - put to 1 if using httpS
    Local $tls = 0                                                                                                     ; enables/disables TLS when required
;~  Local $IPPort = 465                                                                                                ; GMAIL port used for sending the mail
;~  Local $ssl = 1                                                                                                     ; GMAIL enables/disables secure socket layer sending - put to 1 if using httpS
    Local $rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls)
    If @error Then
        MsgBox(0, "Error sending email", "Error code: " & @error & @CRLF & "Description: " & $rc)
    EndIf
EndFunc   ;==>_SMTP_SendEmail_Example
;
;
; Com Error Handler
Func MyErrFunc(ByRef $oMyError)
    Local $HexNumber = Hex($oMyError.number, 8)
    $oMyRet[0] = $HexNumber
    $oMyRet[1] = StringStripWS($oMyError.description, 3)
    ConsoleWrite("### COM Error !  Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet[1] & @LF)
    SetError(1)                                                                                                        ; something to check for when this function returns
    Return
EndFunc   ;==>MyErrFunc

 

image.png.6b896ec9a21bb9ff790c45dad1f609e2.png

 

EmailConfig.au3 EmailConfig_Example_STMP_Mailer.au3

Edited by mLipok

Signature beginning:
* Please remember: "AutoIt"..... *  Wondering who uses AutoIt and what it can be used for ? * Forum Rules *
* ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button:

Spoiler

Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. 

My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 *

 

My contribution to others projects or UDF based on  others projects: * _sql.au3 UDF  * POP3.au3 UDF *  RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * 

Useful links: * Forum Rules * Forum etiquette *  Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * 

Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * 

OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX

IE Related:  * How to use IE.au3  UDF with  AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * 

I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions *  EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *

I also encourage you to check awesome @trancexx code:  * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors  * HTML editor * 

winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/

"Homo sum; humani nil a me alienum puto" - Publius Terentius Afer
"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming"
:naughty:  :ranting:, be  :) and       \\//_.

Anticipating Errors :  "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty."

Signature last update: 2023-04-24

Link to comment
Share on other sites
  • mLipok changed the title to EmailConfig.au3 UDF - support topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...