Is there a way to save data on listview to a txt file but the text is still complete? I did but failed

Loc · July 26, 2020

I hope people are not uncomfortable with me
I don't know why when saving and I export and when I add it is no longer a block of each other, it cannot be accumulated or deleted when adding again

Loc · July 26, 2020

#include <Array.au3>
#include <GUIConstantsEx.au3>
#include <GuiComboBox.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <GuiListView.au3>
$hGUI = GUICreate("Sell", 320, 350, -1, -1, BitOR($GUI_SS_DEFAULT_GUI, $WS_MAXIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_TABSTOP))
$Input = GUICtrlCreateInput("", 8, 8, 130, 21)
$Input2 = GUICtrlCreateInput("", 8, 55, 130, 21)
$Button_Add = GUICtrlCreateButton("Add", 200, 6, 75, 30)
$Button_Del = GUICtrlCreateButton("Delete", 200, 36, 75, 30)
$Button_Save = GUICtrlCreateButton("Save", 50, 320, 75, 30)
$Button_Load = GUICtrlCreateButton("Load", 200, 320, 75, 30)
$Combo = GUICtrlCreateCombo("", 8, 30, 130, 21, $CBS_DROPDOWNLIST)
For $i = 1 To 10
GUICtrlSetData($Combo, $i, 1)
Next
$List = GUICtrlCreateListView("Values Added|Amount|Money", 8, 90, 300, 230, _
BitOR($GUI_SS_DEFAULT_LISTVIEW, $LVS_AUTOARRANGE, $LVS_NOSORTHEADER, $WS_VSCROLL), _
BitOR($WS_EX_CLIENTEDGE, $LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT, $LVS_EX_SUBITEMIMAGES))
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 150)
GUISetState(@SW_SHOW)
Global $aValues[1][4]
$aValues[0][0] = 0
GUIRegisterMsg($WM_COMMAND, "WM_COMMAND")
While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $Button_Add
Add()
Case $Button_Del
;_GUICtrlListView_DeleteItemsSelected($List) ; do not use this.
Local $x
For $x = $aValues[0][0] To 0 Step -1
If _GUICtrlListView_GetItemSelected($List, $x) Then
;~ CW($x & " selected")
_ArrayDelete($aValues, $x + 1)
$aValues[0][0] = $aValues[0][0] - 1
_GUICtrlListView_DeleteItem($List,$x)
EndIf
Next
       Case $Button_Save
           Save()
       Case $Button_Load
           Load()
EndSwitch
WEnd

Func Add()
Local $vr, $am, $ValueCount
$value = GUICtrlRead($Input)
$value2 = GUICtrlRead($Input2)
$am = GUICtrlRead($Combo)
$vr = _ArraySearch($aValues, $value, 1) ;This adds the name to $aValues[$vr][0]
If StringStripWS($value, 8) <> "" Then
If $vr = -1 Then
$ValueCount = $aValues[0][0] + 1
_ArrayAdd($aValues, $value)
$aValues[$ValueCount][3] = GUICtrlCreateListViewItem($value & "|" & $am & "|" & $value2, $List) ; Save this for later.
$aValues[$ValueCount][1] = $am
$aValues[$ValueCount][2] = $value2
$aValues[0][0] = $ValueCount
Else
CW("Value " & $value & " already exists! :adding " & $am & " to " & $aValues[$vr][1])
$aValues[$vr][1] = $aValues[$vr][1] + $am
$aValues[$vr][2] = $aValues[$vr][2] + $value2
_GUICtrlListView_BeginUpdate($List)
_GUICtrlListView_SetItemText($List, $vr - 1, $aValues[$vr][1], 1)
_GUICtrlListView_SetItemText($List, $vr - 1, $aValues[$vr][2], 2)
_GUICtrlListView_EndUpdate($List)
EndIf
EndIf
EndFunc ;==>Add

Func Save()
FileDelete(@ScriptDir&'\item.txt')
$list_count = _GUICtrlListView_GetItemCount ($List)
For $i=0 To $list_count-1
_GUICtrlListView_SetItemSelected($List,$i)
$Read = _GUICtrlListView_GetItemTextArray($List)
FileWriteLine(@ScriptDir&'\item.txt',$Read[1]&'|'&$Read[2]&'|'&$Read[3])
Next
EndFunc

Func Load()
$file_read = FileReadToArray(@ScriptDir&'\item.txt')
$Read_line = UBound($file_read)
For $i=0 To $Read_line-1
GUICtrlCreateListViewItem($file_read[$i],$List)
Next
EndFunc

Func WM_COMMAND($hWnd, $iMsg, $iwParam, $ilParam)
If $iwParam = 1 Then Add()
Return "GUI_RUNDEFMSG"
EndFunc ;==>WM_COMMAND
Func CW($txt)
ConsoleWrite($txt & @CRLF)
EndFunc ;==>CW

Edited July 26, 2020 by Loc

Surya · July 26, 2020

Can you post the full code or explain in detail the problem you are facing.LOL I didnt get you 😄

Loc · July 26, 2020

When I add it to the listview at the beginning I can add or delete data that I add, it can be added up when duplicated. but when i save to txt file. and load the data again but it fails

Surya · July 26, 2020

Please include the full script,Most of the functions are missing when trying to execute it

Loc · July 26, 2020

2 hours ago, Surya said:

Please include the full script,Most of the functions are missing when trying to execute it

#include <Array.au3>
#include <GUIConstantsEx.au3>
#include <GuiComboBox.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <GuiListView.au3>
$hGUI = GUICreate("Sell", 320, 350, -1, -1, BitOR($GUI_SS_DEFAULT_GUI, $WS_MAXIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_TABSTOP))
$Input = GUICtrlCreateInput("", 8, 8, 130, 21)
$Input2 = GUICtrlCreateInput("", 8, 55, 130, 21)
$Button_Add = GUICtrlCreateButton("Add", 200, 6, 75, 30)
$Button_Del = GUICtrlCreateButton("Delete", 200, 36, 75, 30)
$Button_Save = GUICtrlCreateButton("Save", 50, 320, 75, 30)
$Button_Load = GUICtrlCreateButton("Load", 200, 320, 75, 30)
$Combo = GUICtrlCreateCombo("", 8, 30, 130, 21, $CBS_DROPDOWNLIST)
For $i = 1 To 10
    GUICtrlSetData($Combo, $i, 1)
Next
$List = GUICtrlCreateListView("Values Added|Amount|Money", 8, 90, 300, 230, _
        BitOR($GUI_SS_DEFAULT_LISTVIEW, $LVS_AUTOARRANGE, $LVS_NOSORTHEADER, $WS_VSCROLL), _
        BitOR($WS_EX_CLIENTEDGE, $LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT, $LVS_EX_SUBITEMIMAGES))
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 150)
GUISetState(@SW_SHOW)
Global $aValues[1][4]
$aValues[0][0] = 0
GUIRegisterMsg($WM_COMMAND, "WM_COMMAND")
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button_Add
            Add()
        Case $Button_Del
            ;_GUICtrlListView_DeleteItemsSelected($List)  ; do not use this.
            Local $x
            For $x = $aValues[0][0] To 0 Step -1
                If _GUICtrlListView_GetItemSelected($List, $x) Then
;~                     CW($x & " selected")
                    _ArrayDelete($aValues, $x + 1)
                    $aValues[0][0] = $aValues[0][0] - 1
                    _GUICtrlListView_DeleteItem($List,$x)
                EndIf
            Next
        Case $Button_Save
            Save()
        Case $Button_Load
            Load()
    EndSwitch
WEnd

Func Add()
    Local $vr, $am, $ValueCount
    $value = GUICtrlRead($Input)
    $value2 = GUICtrlRead($Input2)
    $am = GUICtrlRead($Combo)
    $vr = _ArraySearch($aValues, $value, 1)                    ;This adds the name to $aValues[$vr][0]
    If StringStripWS($value, 😎 <> "" Then
        If $vr = -1 Then
            $ValueCount = $aValues[0][0] + 1
            _ArrayAdd($aValues, $value)
            $aValues[$ValueCount][3] = GUICtrlCreateListViewItem($value & "|" & $am & "|" & $value2, $List)      ; Save this for later.
            $aValues[$ValueCount][1] = $am
            $aValues[$ValueCount][2] = $value2
            $aValues[0][0] = $ValueCount
        Else
            CW("Value " & $value & " already exists! :adding " & $am & " to " & $aValues[$vr][1])
            $aValues[$vr][1] = $aValues[$vr][1] + $am
            $aValues[$vr][2] = $aValues[$vr][2] + $value2
            _GUICtrlListView_BeginUpdate($List)
            _GUICtrlListView_SetItemText($List, $vr - 1, $aValues[$vr][1], 1)
            _GUICtrlListView_SetItemText($List, $vr - 1, $aValues[$vr][2], 2)
            _GUICtrlListView_EndUpdate($List)
        EndIf
    EndIf
EndFunc   ;==>Add

Func Save()
FileDelete(@ScriptDir&'\item.txt')
    $list_count = _GUICtrlListView_GetItemCount ($List)
    For $i=0 To $list_count-1
        _GUICtrlListView_SetItemSelected($List,$i)
        $Read = _GUICtrlListView_GetItemTextArray($List)
        FileWriteLine(@ScriptDir&'\item.txt',$Read[1]&'|'&$Read[2]&'|'&$Read[3])
    Next
EndFunc

Func Load()
    $file_read = FileReadToArray(@ScriptDir&'\item.txt')
    $Read_line = UBound($file_read)
    For $i=0 To $Read_line-1
        GUICtrlCreateListViewItem($file_read[$i],$List)
    Next
EndFunc


Func WM_COMMAND($hWnd, $iMsg, $iwParam, $ilParam)
    If $iwParam = 1 Then Add()
    Return "GUI_RUNDEFMSG"
EndFunc   ;==>WM_COMMAND
Func CW($txt)
    ConsoleWrite($txt & @CRLF)
EndFunc

Edited July 26, 2020 by Melba23
Added code tags

Dan_555 · July 26, 2020

Loc, please place your scripts into Code boxes, just click on <> and paste the code there.

If you do not do it, your script is getting smilies all around.

I already have placed the calculations into an array. So all you need to do, is to save and load from/to it.

Here is the working script

#include <Array.au3>
#include <GUIConstantsEx.au3>
#include <GuiComboBox.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <GuiListView.au3>
$hGUI = GUICreate("Sell", 320, 350, -1, -1, BitOR($GUI_SS_DEFAULT_GUI, $WS_MAXIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_TABSTOP))
$Input = GUICtrlCreateInput("", 8, 8, 130, 21)
$Input2 = GUICtrlCreateInput("", 8, 55, 130, 21)
$Button_Add = GUICtrlCreateButton("Add", 200, 6, 75, 30)
$Button_Del = GUICtrlCreateButton("Delete", 200, 36, 75, 30)
$Button_Save = GUICtrlCreateButton("Save", 50, 320, 75, 30)
$Button_Load = GUICtrlCreateButton("Load", 200, 320, 75, 30)
$Combo = GUICtrlCreateCombo("", 8, 30, 130, 21, $CBS_DROPDOWNLIST)
For $i = 1 To 10
    GUICtrlSetData($Combo, $i, 1)
Next
$List = GUICtrlCreateListView("Values Added|Amount|Money", 8, 90, 300, 230, _
        BitOR($GUI_SS_DEFAULT_LISTVIEW, $LVS_AUTOARRANGE, $LVS_NOSORTHEADER, $WS_VSCROLL), _
        BitOR($WS_EX_CLIENTEDGE, $LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT, $LVS_EX_SUBITEMIMAGES))
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 150)
GUISetState(@SW_SHOW)
Global $aValues[1][4]
$aValues[0][0] = 0
GUIRegisterMsg($WM_COMMAND, "WM_COMMAND")
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button_Add
            Add()
        Case $Button_Del
            ;_GUICtrlListView_DeleteItemsSelected($List)  ; do not use this.
            Local $x
            For $x = $aValues[0][0] To 0 Step -1
                If _GUICtrlListView_GetItemSelected($List, $x) Then
;~                     CW($x & " selected")
                    _ArrayDelete($aValues, $x + 1)
                    $aValues[0][0] = $aValues[0][0] - 1
                    _GUICtrlListView_DeleteItem($List, $x)
                EndIf
            Next
        Case $Button_Save
            Save()
        Case $Button_Load
            Load()
    EndSwitch
WEnd

Func Add()
    Local $vr, $am, $ValueCount
    $value = GUICtrlRead($Input)
    $value2 = GUICtrlRead($Input2)
    $am = GUICtrlRead($Combo)
    $vr = _ArraySearch($aValues, $value, 1)                    ;This adds the name to $aValues[$vr][0]
    If StringStripWS($value, 8) <> "" Then
        If $vr = -1 Then
            $ValueCount = $aValues[0][0] + 1
            _ArrayAdd($aValues, $value)
            $aValues[$ValueCount][3] = GUICtrlCreateListViewItem($value & "|" & $am & "|" & $value2, $List)      ; Save this for later.
            $aValues[$ValueCount][1] = $am
            $aValues[$ValueCount][2] = $value2
            $aValues[0][0] = $ValueCount
        Else
            CW("Value " & $value & " already exists! :adding " & $am & " to " & $aValues[$vr][1])
            $aValues[$vr][1] = $aValues[$vr][1] + $am
            $aValues[$vr][2] = $aValues[$vr][2] + $value2
            _GUICtrlListView_BeginUpdate($List)
            _GUICtrlListView_SetItemText($List, $vr - 1, $aValues[$vr][1], 1)
            _GUICtrlListView_SetItemText($List, $vr - 1, $aValues[$vr][2], 2)
            _GUICtrlListView_EndUpdate($List)
        EndIf
    EndIf
EndFunc   ;==>Add

Func Save()
    Local $filename = @ScriptDir & '\item.txt'
    Local $hF = FileOpen($filename, 2)
    For $i = 1 To $aValues[0][0]
        FileWriteLine($hF, $aValues[$i][0] & '|' & $aValues[$i][1] & '|' & $aValues[$i][2])
    Next
    FileClose($hF)
EndFunc   ;==>Save

Func Load()
    Local $sp = 0
    _GUICtrlListView_DeleteAllItems($List)
    $aValues = ""
    Global $aValues[1][4]
    $aValues[0][0]=0
    $file_read = FileReadToArray(@ScriptDir & '\item.txt')
    $Read_line = UBound($file_read)
    For $i = 0 To $Read_line - 1
        $sp = StringSplit($file_read[$i], "|")
        If IsArray($sp) and UBound($sp)=4 Then
            _ArrayAdd($aValues, $sp[1])
            $aValues[0][0] = $aValues[0][0] + 1
            $aValues[$i+1][1] = $sp[2]
            $aValues[$i+1][2] = $sp[3]
            $aValues[$i+1][3] = GUICtrlCreateListViewItem($file_read[$i], $List)
        EndIf
    Next
EndFunc   ;==>Load


Func WM_COMMAND($hWnd, $iMsg, $iwParam, $ilParam)
    If $iwParam = 1 Then Add()
    Return "GUI_RUNDEFMSG"
EndFunc   ;==>WM_COMMAND
Func CW($txt)
    ConsoleWrite($txt & @CRLF)
EndFunc   ;==>CW

Edited February 13, 2021 by Dan_555
deleted the attached picture

Loc · July 26, 2020

There is no <> button on my side

Edited July 26, 2020 by Melba23
Clean up

Dan_555 · July 26, 2020

strange, alternatively you can write "["code"]" paste your code here "["/code"]" (without " )

Edited February 13, 2021 by Dan_555
deleted the attached picture

Loc · July 26, 2020

@Dan_555 My benefactors It is possible to spend some time watching for me. When I added the item to the listview and saved and loaded it was great but the saved item was deleted and added again it could not be deleted . I'm not good at handling arrays

Dan_555 · July 26, 2020

Hmm, i'm not sure if i can follow what you said.

Earlier today, i pasted a script, then i have noticed that there is an error, deleted the code until i could fix the error, then pasted the corrected script again.

Maybe you have got the bogus version of the script which i have deleted ?

can you check the last script again ?

Edited July 26, 2020 by Dan_555

Loc · July 27, 2020

My tool is completely repaired from @ Dan_555. I only developed the cash register but didn't know how it exported the data from Listview to the txt file, it was not aligned, I tried to fix that by "" but with no success

Func billplease()

#include <Array.au3>
#include <GUIConstantsEx.au3>
#include <GuiComboBox.au3>
#include <ListViewConstants.au3>
#include <WindowsConstants.au3>
#include <GuiListView.au3>
$hGUI = GUICreate("Sell", 320, 350, -1, -1, BitOR($GUI_SS_DEFAULT_GUI, $WS_MAXIMIZEBOX, $WS_SIZEBOX, $WS_THICKFRAME, $WS_TABSTOP))
$Input = GUICtrlCreateCombo("", 8, 5, 130, 21,$CBS_DROPDOWNLIST)
GUICtrlSetData($Input, "Cake|Cooking oil|Street|Salt|Egg", "Cake")
$Input2 = GUICtrlCreateCombo("", 8, 55, 130, 21,$CBS_DROPDOWNLIST)
For $i = 10 To 100 Step 10
    GUICtrlSetData($Input2, $i, "10")
Next
$Button_Add = GUICtrlCreateButton("Add", 200, 6, 75, 30)
$Button_Del = GUICtrlCreateButton("Delete", 200, 36, 75, 30)
$Button_Save = GUICtrlCreateButton("Save", 10, 320, 75, 25)
$Button_Load = GUICtrlCreateButton("Load", 90, 320, 75, 25)
$Button_Bill = GUICtrlCreateButton("Bill please", 200, 320, 75, 25)
$Combo = GUICtrlCreateCombo("", 8, 30, 130, 21, $CBS_DROPDOWNLIST)
For $i = 1 To 30
    GUICtrlSetData($Combo, $i, 1)
Next
$List = GUICtrlCreateListView("Product|Amount|Money", 8, 90, 300, 230, _
        BitOR($GUI_SS_DEFAULT_LISTVIEW, $LVS_AUTOARRANGE, $LVS_NOSORTHEADER, $WS_VSCROLL), _
        BitOR($WS_EX_CLIENTEDGE, $LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT, $LVS_EX_SUBITEMIMAGES))
GUICtrlSendMsg(-1, $LVM_SETCOLUMNWIDTH, 0, 150)
GUISetState(@SW_SHOW)
Global $aValues[1][4]
$aValues[0][0] = 0
While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Button_Add
            Add()
        Case $Button_Del
            ;_GUICtrlListView_DeleteItemsSelected($List)  ; do not use this.
            Local $x
            For $x = $aValues[0][0] To 0 Step -1
                If _GUICtrlListView_GetItemSelected($List, $x) Then
;~                     CW($x & " selected")
                    _ArrayDelete($aValues, $x + 1)
                    $aValues[0][0] = $aValues[0][0] - 1
                    _GUICtrlListView_DeleteItem($List, $x)
                EndIf
            Next
        Case $Button_Save
            Save()
        Case $Button_Load
            Load()
        Case $Button_Bill
            _Billplease()
    EndSwitch
WEnd

Func _Billplease()
Local $filename = @ScriptDir & '\Billplease.txt'
Local $hF = FileOpen($filename, 2)
FileWriteLine($hF, @MDAY&"."&@MON&"."&@YEAR )
FileWriteLine($hF, "")
FileWriteLine($hF,"Product    |   Amount  |  Money ")
FileWriteLine($hF, "")
For $i = 1 To $aValues[0][0]
FileWriteLine($hF, $aValues[$i][0] & '   ' & $aValues[$i][1] & '   ' & $aValues[$i][2])
Next
FileWriteLine($hF, "")
FileWriteLine($hF, "see you later!")
EndFunc


Func Add()
    Local $vr, $am, $ValueCount
    $value = GUICtrlRead($Input)
    $value2 = GUICtrlRead($Input2)
    $am = GUICtrlRead($Combo)
    $vr = _ArraySearch($aValues, $value, 1)                    ;This adds the name to $aValues[$vr][0]
    If StringStripWS($value, 8) <> "" Then
        If $vr = -1 Then
            $ValueCount = $aValues[0][0] + 1
            _ArrayAdd($aValues, $value)
            $aValues[$ValueCount][3] = GUICtrlCreateListViewItem($value & "|" & $am & "|" & $value2, $List)      ; Save this for later.
            $aValues[$ValueCount][1] = $am
            $aValues[$ValueCount][2] = $value2
            $aValues[0][0] = $ValueCount
        Else
            $aValues[$vr][1] = $aValues[$vr][1] + $am
            $aValues[$vr][2] = $aValues[$vr][2] + $value2
            _GUICtrlListView_BeginUpdate($List)
            _GUICtrlListView_SetItemText($List, $vr - 1, $aValues[$vr][1], 1)
            _GUICtrlListView_SetItemText($List, $vr - 1, $aValues[$vr][2], 2)
            _GUICtrlListView_EndUpdate($List)
        EndIf
    EndIf
EndFunc   ;==>Add

Func Save()
    Local $filename = @ScriptDir & '\item.txt'
    Local $hF = FileOpen($filename, 2)
    For $i = 1 To $aValues[0][0]
        FileWriteLine($hF, $aValues[$i][0] & '|' & $aValues[$i][1] & '|' & $aValues[$i][2])
    Next
    FileClose($hF)
EndFunc   ;==>Save

Func Load()
    Local $sp = 0
    _GUICtrlListView_DeleteAllItems($List)
    $aValues = ""
    Global $aValues[1][4]
    $aValues[0][0]=0
    $file_read = FileReadToArray(@ScriptDir & '\item.txt')
    $Read_line = UBound($file_read)
    For $i = 0 To $Read_line - 1
        $sp = StringSplit($file_read[$i], "|")
        If IsArray($sp) and UBound($sp)=4 Then
            _ArrayAdd($aValues, $sp[1])
            $aValues[0][0] = $aValues[0][0] + 1
            $aValues[$i+1][1] = $sp[2]
            $aValues[$i+1][2] = $sp[3]
            $aValues[$i+1][3] = GUICtrlCreateListViewItem($file_read[$i], $List)
        EndIf
    Next
EndFunc   ;==>Load

Nine · July 27, 2020

Try this :

Local $aValues = [[3,0,0], ["Bread", 2, 3], ["Butter", 2.2, 3.3], ["Pineapple", 2, 3.34]]
_Billplease()

Func _Billplease()
  Local $filename = @ScriptDir & '\Billplease.txt'
  Local $hF = FileOpen($filename, 2)
  FileWriteLine($hF, @MDAY & "." & @MON & "." & @YEAR)
  FileWriteLine($hF, "")
  FileWriteLine($hF, "Product    |   Amount  |  Money ")
  FileWriteLine($hF, "")
  For $i = 1 To $aValues[0][0]
    FileWriteLine($hF, StringFormat ("%-12s %8.2f %9.2f", $aValues[$i][0], $aValues[$i][1], $aValues[$i][2]))
  Next
  FileWriteLine($hF, "")
  FileWriteLine($hF, "see you later!")
  FileClose ($hF)
EndFunc   ;==>_Billplease

Edited July 27, 2020 by Nine

Loc · July 27, 2020

it's not very balanced

Nine · July 27, 2020

Works for me. You need to use a fix char font otherwise it will never work.

Edited March 31, 2023 by Nine

Loc · July 28, 2020

Is there a way to save the whole frame on the listview in the txt file is still intact

Loc · July 28, 2020

Musashi · July 28, 2020

By the way : Why do you open a new thread instead of continuing the existing one ( saving-and-uploading-of-guictrllistview ) ?

You might want to consider the following solutions :

1. from @Melba23 :

https://www.autoitscript.com/forum/topic/182492-guilistviewex-bugfix-version-14-jun-20/ ==> _GUIListViewEx_Save/LoadListView functions

2. from @guinness :

exports-the-details-of-a-listview-to-a-txt-file

Loc · July 28, 2020

save to txt file mainly to print

Dan_555 · July 28, 2020

Please explain: what do you mean ?

Block all input without UAC	Save/Retrieve Images to/from Text	Monitor Management (VCP commands)
Tool to search in text (au3) files	Date Range Picker	Virtual Desktop Manager
Sudoku Game 2020	Overlapped Named Pipe IPC	HotString 2.0 - Hot keys with string
x64 Bitwise Operations	Multi-keyboards HotKeySet	Recursive Array Display
Fast and simple WCD IPC	Multiple Folders Selector	Printer Manager
GIF Animation (cached)	Screen Scraping	Multi-Threading Made Easy

Block all input without UAC	Save/Retrieve Images to/from Text	Monitor Management (VCP commands)
Tool to search in text (au3) files	Date Range Picker	Virtual Desktop Manager
Sudoku Game 2020	Overlapped Named Pipe IPC	HotString 2.0 - Hot keys with string
x64 Bitwise Operations	Multi-keyboards HotKeySet	Recursive Array Display
Fast and simple WCD IPC	Multiple Folders Selector	Printer Manager
GIF Animation (cached)	Screen Scraping	Multi-Threading Made Easy

Is there a way to save data on listview to a txt file but the text is still complete? I did but failed

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members