Jump to content

Gui Popup

zoel

By zoel,
in AutoIt GUI Help and Support

 Share

Recommended Posts

zoel Wayfarer

zoel

Posted
Posted

Hi, I made a Gui where I have some buttons with a question mark and I want when a user press the button to popup an info text, I searched the forum but didn't find something helpfull.

do you have any hints, Thank you!

 

here is my code 

#include <AutoItConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiEdit.au3>
#include <ScrollBarsConstants.au3>
#include <WindowsConstants.au3>
#include <ButtonConstants.au3>
#include <EditConstants.au3>
Local $aWndPos
$NetAs = GUICreate("NetAs-Network Assistant", 1096, 497, 182, 135)
Local $idFilemenu = GUICtrlCreateMenu("&File")
Local $idExititem = GUICtrlCreateMenuItem("Exit", $idFilemenu)
Local $idInput = GUICtrlCreateEdit("", 168, 24, 921, 465)
Local $Button1 = GUICtrlCreateButton("IPconfig", 16, 32, 75, 25)
Local $Button2 = GUICtrlCreateButton("?", 96, 32, 19, 25)
Local $Button3 = GUICtrlCreateButton("FlushDNS", 16, 72, 75, 25)
Local $Button4 = GUICtrlCreateButton("?", 96, 72, 19, 25)
Local $Button5 = GUICtrlCreateButton("ConnRelease", 16, 112, 75, 25)
Local $Button6 = GUICtrlCreateButton("?", 96, 112, 19, 25)
Local $Button7 = GUICtrlCreateButton("NetStat", 16, 152, 75, 25)
Local $Button8 = GUICtrlCreateButton("?", 96, 152, 19, 25)
Local $Button9 = GUICtrlCreateButton("Route Print", 16, 192, 75, 25)
Local $Button10 = GUICtrlCreateButton("?", 96, 192, 19, 25)
Local $Button11 = GUICtrlCreateButton("ARP", 16, 232, 75, 25)
Local $Button12 = GUICtrlCreateButton("?", 96, 232, 19, 25)
Local $Button13 = GUICtrlCreateButton("Button13", 16, 272, 75, 25)
Local $Button14 = GUICtrlCreateButton("?", 96, 272, 19, 25)
Local $Button15 = GUICtrlCreateButton("Button15", 16, 312, 75, 25)
Local $Button16 = GUICtrlCreateButton("?", 96, 312, 19, 25)
Local $Button17 = GUICtrlCreateButton("Button17", 16, 352, 75, 25)
Local $Button18 = GUICtrlCreateButton("?", 96, 352, 19, 25)
Local $Button19 = GUICtrlCreateButton("Button19", 16, 392, 75, 25)
Local $Button20 = GUICtrlCreateButton("?", 96, 392, 19, 25)
Local $Button21 = GUICtrlCreateButton("Button21", 16, 432, 75, 25)
Local $Button22 = GUICtrlCreateButton("?", 96, 432, 19, 25)
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $idExititem
            Exit
        Case $Button1
            GUICtrlSetData($idInput, _CmdInfo() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button3
            GUICtrlSetData($idInput, _CmdInfo2() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button5
            GUICtrlSetData($idInput, _CmdInfo3() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button7
            GUICtrlSetData($idInput, _CmdInfo4() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button9
            GUICtrlSetData($idInput, _CmdInfo5() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button11
            GUICtrlSetData($idInput, _CmdInfo6() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
    EndSwitch
WEnd



Func _CmdInfo($_sCmdInfo = "ipconfig /all")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo2($_sCmdInfo2 = "IPConfig /FlushDNS")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo2, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo3($_sCmdInfo3 = "IPConfig /Release")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo3, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo4($_sCmdInfo4 = "NetStat")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo4, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo5($_sCmdInfo5 = " Route Print")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo5, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo6($_sCmdInfo6 = " Route Print")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo6, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc

 

Link to comment
Share on other sites
  • Developers
Jos Universalist

Jos

Posted
  • Developers
Posted (edited)

Slow down @zoel, It is impolite to bump your post within 24 hours, so please be patient.

 

2 hours ago, zoel said:

I don't know, how to do that?

Open the helpfile in the meantime and invest the waiting time well to learn yourself. 

Jos

Edited by Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.  :)

Link to comment
Share on other sites
zoel Wayfarer

zoel

Posted
  • Author
Posted
1 hour ago, Sidley said:

As dmob said, easier (and nicer) as a tooltip. Hover over the question mark to activate (In this case button2) 

Local $Button2 = GUICtrlCreateButton("?", 96, 32, 19, 25)
GUICtrlSetTip(-1, "This button will run the IP config command", "This is a ToolTip")

-1 is the last GUI control, $Button2 could also be used instead.

This is very nice, but the tooltip stays open for little time, I have a long text, how I can make it to stay open for much longer.

Thank  you

Link to comment
Share on other sites
BrewManNH Universalist

BrewManNH

Posted
Posted

 

12 minutes ago, zoel said:

but it doesn't do what I want

How is that at all helpful to getting yourself some help?

Read that line again and imagine you are us trying to figure out WTH you tried or what didn't meet your qualification. You'll find that it's seriously inadequate.

The words following that should be edited, what you should have written is, so I'm going to try something else and I'll let you know what I find out.

Post your code with exactly what you want and we'll help.

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites
zoel Wayfarer

zoel

Posted
  • Author
Posted

I want the tooltip to stay much longer open since it will a long text.

  

#include <AutoItConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiEdit.au3>
#include <ScrollBarsConstants.au3>
#include <WindowsConstants.au3>
#include <ButtonConstants.au3>
#include <EditConstants.au3>
#include <GUIToolTip.au3>
Local $aWndPos
$NetAs = GUICreate("NetAs-Network Assistant", 1096, 497, 182, 135)
Local $idFilemenu = GUICtrlCreateMenu("&File")
Local $idExititem = GUICtrlCreateMenuItem("Exit", $idFilemenu)
Local $idInput = GUICtrlCreateEdit("", 168, 24, 921, 465)
Local $Button1 = GUICtrlCreateButton("IPconfig", 16, 32, 75, 25)
Local $Button2 = GUICtrlCreateButton("?", 96, 32, 19, 25)
GUICtrlSetTip(-1, "This button will run the IP config command", "This is a ToolTip")
Local $Button3 = GUICtrlCreateButton("FlushDNS", 16, 72, 75, 25)
Local $Button4 = GUICtrlCreateButton("?", 96, 72, 19, 25)
Local $Button5 = GUICtrlCreateButton("ConnRelease", 16, 112, 75, 25)
Local $Button6 = GUICtrlCreateButton("?", 96, 112, 19, 25)
Local $Button7 = GUICtrlCreateButton("NetStat", 16, 152, 75, 25)
Local $Button8 = GUICtrlCreateButton("?", 96, 152, 19, 25)
Local $Button9 = GUICtrlCreateButton("Route Print", 16, 192, 75, 25)
Local $Button10 = GUICtrlCreateButton("?", 96, 192, 19, 25)
Local $Button11 = GUICtrlCreateButton("ARP", 16, 232, 75, 25)
Local $Button12 = GUICtrlCreateButton("?", 96, 232, 19, 25)
Local $Button13 = GUICtrlCreateButton("NSLookup", 16, 272, 75, 25)
Local $Button14 = GUICtrlCreateButton("?", 96, 272, 19, 25)
Local $Button15 = GUICtrlCreateButton("Route Print", 16, 312, 75, 25)
Local $Button16 = GUICtrlCreateButton("?", 96, 312, 19, 25)
Local $Button17 = GUICtrlCreateButton("GetMac", 16, 352, 75, 25)
Local $Button18 = GUICtrlCreateButton("?", 96, 352, 19, 25)
Local $Button19 = GUICtrlCreateButton("Button19", 16, 392, 75, 25)
Local $Button20 = GUICtrlCreateButton("?", 96, 392, 19, 25)
Local $Button21 = GUICtrlCreateButton("Button21", 16, 432, 75, 25)
Local $Button22 = GUICtrlCreateButton("?", 96, 432, 19, 25)
GUISetState(@SW_SHOW)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $idExititem
            Exit
        Case $Button1
            GUICtrlSetData($idInput, _CmdInfo() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button3
            GUICtrlSetData($idInput, _CmdInfo2() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button5
            GUICtrlSetData($idInput, _CmdInfo3() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button7
            GUICtrlSetData($idInput, _CmdInfo4() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button9
            GUICtrlSetData($idInput, _CmdInfo5() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button11
            GUICtrlSetData($idInput, _CmdInfo6() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button13
            GUICtrlSetData($idInput, _CmdInfo7() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button15
            GUICtrlSetData($idInput, _CmdInfo8() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
        Case $Button17
            GUICtrlSetData($idInput, _CmdInfo9() & @CRLF)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
            _GUICtrlEdit_Scroll($idInput, $SB_SCROLLCARET)
    EndSwitch
WEnd



Func _CmdInfo($_sCmdInfo = "ipconfig /all")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo2($_sCmdInfo2 = "IPConfig /FlushDNS")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo2, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo3($_sCmdInfo3 = "IPConfig /Release")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo3, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo4($_sCmdInfo4 = "NetStat")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo4, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo5($_sCmdInfo5 = " Route Print")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo5, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo6($_sCmdInfo6 = "ARP -a")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo6, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo7($_sCmdInfo7 = "NSLookup")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo7, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo8($_sCmdInfo8 = "Route Print")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo8, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc
Func _CmdInfo9($_sCmdInfo9 = "getmac")
    Local $iPID = Run(@ComSpec & " /c " & $_sCmdInfo9, "", @SW_HIDE,  BitOR($STDERR_CHILD, $STDOUT_CHILD))
    ; Wait until the process has closed using the PID returned by Run.
    ProcessWaitClose($iPID)
    ; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
    Local $sOutput = StringReplace(StdoutRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sOutErr = StringReplace(StderrRead($iPID), @CRLF & @CRLF, @CRLF)
    Local $sReult = $sOutput <> "" ? $sOutput : $sOutErr
    Return $sReult
EndFunc

 

Link to comment
Share on other sites
BrewManNH Universalist

BrewManNH

Posted
Posted

Where's the code for the tooltips from GUIToolTip?

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites
  • Developers
Jos Universalist

Jos

Posted
  • Developers
Posted

You really need to start using the helpfile more/better. All _GUITooltip*  UDF are described in there with examples.
Read/play/test/understand and try again.

Then come back here with any issues you might have. ;)

Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.  :)

Link to comment
Share on other sites
zoel Wayfarer

zoel

Posted
  • Author
Posted

I read the GUIToolTip_AddTool in the help file, but I cant find a valuable info on how to make the tooltip stays longer so that a user can read what it says.

Anyone knows how to do that?

Thank you!

Link to comment
Share on other sites
  • Developers
Jos Universalist

Jos

Posted
  • Developers
Posted

I do not see any code you have tried and not working...  show us so we can point you in the right direction!

Jos

SciTE4AutoIt3 Full installer Download page   - Beta files       Read before posting     How to post scriptsource   Forum etiquette  Forum Rules 
 
Live for the present,
Dream of the future,
Learn from the past.  :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...