XML DOM wrapper (COM)

JSThePatriot · January 30, 2009

I'm not sure, I've asked eltorro about it before but he hasn't been around.
http://www.autoitscript.com/forum/index.ph...mp;#entry541825

weaponx,

Okay so it's not just when you write certain portions back out. I will check with MSDN, and see if there's something the library can do.

Thanks,

Jarvis

weaponx · January 30, 2009

Ok I hope you are ready for a tough response. You can get nicely formatted XML returned with a stylesheet. I had success with this one. The problem is that you are working with an XML string rather than a file which the _XMLTransform function doesn't like.

Updated _XMLTransform function:

CODE

;===============================================================================

; Function Name: _XMLTransform

; Description:

; Parameter(s): $oXMLDoc The document to transform

; $Style (optional) The stylesheet to use

; $szNewDoc (optional) Save to this file.

; Return Value(s): On Success returns 1

; On Failure @Error = 1

; User CallTip:

; Author(s): Stephen Podhajecki <gehossafats at netmdc dot com>

; Note(s): Modified by WeaponX

;===============================================================================

Func _XMLTransform($oXMLDoc="", $Style = "", $szNewDoc = "")

If $oXMLDoc = "" Then

$oXMLDoc = $objDoc

EndIf

If not IsObj($oXMLDoc) then

_XMLError("No object passed to function _XMLSetAttrib")

Return SetError(1,29,-1)

EndIf

Local $bIndented = False

Local $xslt = ObjCreate("MSXML2.XSLTemplate." & $DOMVERSION & ".0")

Local $xslDoc = ObjCreate("MSXML2.FreeThreadedDOMdocument." & $DOMVERSION & ".0")

Local $xmldoc = ObjCreate("MSXML2.DOMdocument." & $DOMVERSION & ".0")

Local $xslProc

$xslDoc.async = False

If FileExists($Style) Then

_DebugWrite("LoadXML:1:" & $xslDoc.load ($Style) & @LF)

Else

_DebugWrite("LoadXML:2:" & $xslDoc.loadXML (_GetDefaultStyleSheet()) & @LF)

EndIf

If $xslDoc.parseError.errorCode <> 0 Then

_XMLError("Error Transforming NodeToObject: " & $xslDoc.parseError.reason)

EndIf

;If Not FileExists("XSLFile.xsl") Then FileWrite("XSLFile.xsl", $xslDoc.xml ())

$xslt.stylesheet = $xslDoc

$xslProc = $xslt.createProcessor ()

$xslProc.input = $objDoc

$oXMLDoc.transformNodeToObject ($xslDoc, $xmldoc)

If $oXMLDoc.parseError.errorCode <> 0 Then

_XMLError("_XMLTransform:" & @LF & "Error Transforming NodeToObject: " & $oXMLDoc.parseError.reason)

$bIndented = False

Else

$bIndented = True

EndIf

If $bIndented Then

;Write transformed xml to a file if a filename is given

If $szNewDoc <> "" Then

$xmldoc.save ($szNewDoc)

If $xmldoc.parseError.errorCode <> 0 Then

_XMLError("_XMLTransform:" & @LF & "Error Saving: " & $xmldoc.parseError.reason)

$bIndented = False

EndIf

Else

;Changed behavior here, since there is no filename to save to - WeaponX

;If ($bXMLAUTOSAVE = True) Then

;$xmldoc.save ($strFile)

;$oXMLDoc.Load ($strFile)

;EndIf

;Overwrite original object with transformed object

$objDoc = $xmldoc

If $oXMLDoc.parseError.errorCode <> 0 Then

_XMLError("_XMLTransform:" & @LF & "Error Saving: " & $oXMLDoc.parseError.reason)

$bIndented = False

EndIf

$xslProc = 0

$xslt = 0

$xslDoc = 0

$xmldoc = 0

Return $bIndented

EndFunc ;==>_XMLTransform

XSLFile.xsl:

CODE

<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">

<xsl:output method="xml" indent="no" encoding="UTF-8"/>

<xsl:strip-space elements="*"/>

<xsl:preserve-space elements="xsl:text"/>

<xsl:template match="*|comment()">

<xsl:param name="depth">0</xsl:param>

<xsl:variable name="isFirstNode" select="count(../..) = 0 and position() = 1"/>

<xsl:variable name="previous" select="preceding-sibling::node()[1]"/>

<xsl:variable name="adjacentComplexElement" select="count($previous/*) > 0 or count(*) > 0"/>

<xsl:variable name="adjacentDifferentType" select="not(($previous/self::comment() and self::comment()) or ($previous/self: and self: ))"/>

<xsl:if test="$isFirstNode or ($previous and ($adjacentComplexElement or $adjacentDifferentType))">

<xsl:text>
</xsl:text>

</xsl:if>

<xsl:text>
</xsl:text>

<xsl:call-template name="indent">

<xsl:with-param name="depth" select="$depth"/>

</xsl:call-template>

<xsl:copy>

<xsl:if test="self: ">

<xsl:copy-of select="@*"/>

<xsl:apply-templates>

<xsl:with-param name="depth" select="$depth + 1"/>

</xsl:apply-templates>

<xsl:if test="count(*) > 0">

<xsl:text>
</xsl:text>

<xsl:call-template name="indent">

<xsl:with-param name="depth" select="$depth"/>

</xsl:call-template>

</xsl:if>

</xsl:copy>

<xsl:variable name="isLastNode" select="count(../..) = 0 and position() = last()"/>

<xsl:if test="$isLastNode">

<xsl:text>
</xsl:text>

</xsl:if>

</xsl:template>

<xsl:template name="indent">

<xsl:param name="depth"/>

<xsl:if test="$depth > 0">

<xsl:text> </xsl:text>

<xsl:call-template name="indent">

<xsl:with-param name="depth" select="$depth - 1"/>

</xsl:call-template>

</xsl:if>

</xsl:template>

<xsl:template match="text()">

<xsl:call-template name="escapeNewlines">

<xsl:with-param name="text">

<xsl:value-of select="."/>

</xsl:with-param>

</xsl:call-template>

</xsl:template>

<xsl:template name="escapeNewlines">

<xsl:param name="text"/>

<xsl:if test="string-length($text) > 0">

<xsl:choose>

<xsl:when test="substring($text, 1, 1) = '
'">

<xsl:text disable-output-escaping="yes">&#xA;</xsl:text>

</xsl:when>

<xsl:otherwise>

<xsl:value-of select="substring($text, 1, 1)"/>

</xsl:otherwise>

</xsl:choose>

<xsl:call-template name="escapeNewlines">

<xsl:with-param name="text" select="substring($text, 2)"/>

</xsl:call-template>

</xsl:if>

</xsl:template>

</xsl:stylesheet>

Example script:

CODE

#include "_XMLDomWrapper.au3"

$bXMLAUTOSAVE = false

$string = '<?xml version="1.0" encoding="utf-8"?>' & _

'<colors>' & _

'<color name="Red" hex="0x"/>' & _

'<color name="Blue" hex="0x"/>' & _

'<color name="Green" hex="0x"/>' & _

'</colors>'

_XMLLoadXML($string)

$path = "//colors"

;Retrieve all subnodes of "Keys" (used for count)

$nodesArray = _XMLGetChildNodes($path)

For $X = 1 to $nodesArray[0]

ConsoleWrite(_XMLGetAttrib($path & "/color[" & $X & "]", "name") & " " & _XMLGetAttrib($path & "/color[" & $X & "]", "hex") & @CRLF)

_XMLSetAttrib($path & "/color[@name='Red']", "hex", "0xFF0000")

_XMLSetAttrib($path & "/color[@name='Blue']", "hex", "0x0000FF")

_XMLSetAttrib($path & "/color[@name='Green']", "hex", "0x00FF00")

;Retrieve all subnodes of "Keys" (used for count)

$nodesArray = _XMLGetChildNodes($path)

For $X = 1 to $nodesArray[0]

ConsoleWrite(_XMLGetAttrib($path & "/color[" & $X & "]", "name") & " " & _XMLGetAttrib($path & "/color[" & $X & "]", "hex") & @CRLF)

ConsoleWrite("+Pre-Transformation" & @CRLF)

ConsoleWrite("+-----------------------------" & @CRLF)

ConsoleWrite($objDoc.xml & @CRLF)

;Apply stylesheet

_XMLTransform("","XSLFile.xsl")

ConsoleWrite("+-----------------------------" & @CRLF)

ConsoleWrite("+Post-Transformation" & @CRLF)

ConsoleWrite("+-----------------------------" & @CRLF)

ConsoleWrite($objDoc.xml & @CRLF)

;Add encoding which is stripped by loadXML method

;ConsoleWrite(StringRegExpReplace($objDoc.xml,'(<?xml.*)(\Q?>\E)','\1 encoding="utf-8"\2') & @CRLF)

;ConsoleWrite(StringRegExpReplace($objDoc.xml,'\Q<?xml\E(.*)\Q?>\E','<?xml\1 encoding="utf-8"?>') & @CRLF)

Output:

+-----------------------------
+Pre-Transformation
+-----------------------------
<?xml version="1.0"?>
<colors><color name="Red" hex="0xFF0000"/><color name="Blue" hex="0x0000FF"/><color name="Green" hex="0x00FF00"/></colors>

+-----------------------------
+Post-Transformation
+-----------------------------
<?xml version="1.0"?>
<colors>
    <color name="Red" hex="0xFF0000"></color>
    <color name="Blue" hex="0x0000FF"></color>
    <color name="Green" hex="0x00FF00"></color>
</colors>

Edited January 30, 2009 by weaponx

JSThePatriot · January 30, 2009

weaponx,

It doesn't end up bothering me quite so much as I just replace all instances of @CRLF @CR & @LF with "" so I don't end up with any new line type of spaces in my output. I still wish that it didn't add them from the library, as it's not expected behavior for your XML to be modified when you didn't ask for it to.

Thanks for showing the above as I am sure it can help someone.

Jarvis

JSThePatriot · January 30, 2009

weaponx,

I haven't tested yet, but the $objDoc.preserveWhiteSpace is set to true. I have setup a boolean global at the top of the include, and added

If $b_PresereWhiteSpace Then
        $objDoc.preserveWhiteSpace = True
    Else
        $objDoc.preserveWhiteSpace = False
    EndIf

To the functions _XMLCreateFile() & _XMLLoadXML()

I will let you know how my tests go shortly.

Thanks,

Jarvis

ghetek · February 1, 2009

I cant seem to get this to work.

This works!

#include <Array.au3>
#include <_XMLDomWrapper.au3>
$pfSense_Aliases = pfSenseGetAliases(@ScriptDir & "\config.xml")
Func pfSenseGetAliases($pfSense_XMLFile)
    $res = _XMLFileOpen($pfSense_XMLFile)
    If $res=0 Then
        MsgBox(0,"","File not found")
        Exit
    EndIf
    $pfSense_AliasCount = _XMLGetNodeCount("/pfsense/aliases/alias")
    Local $pfSense_Aliases[$pfSense_AliasCount + 1][5]
    $pfSense_Aliases[0][0] = $pfSense_AliasCount
    For $i = 1 To $pfSense_Aliases[0][0] Step 1
        $pfSense_Name = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/name")
        $pfSense_Address = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/address")
        $pfSense_Description = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/descr")
        $pfSense_Type = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/type")
        $pfSense_Detail = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/detail")
        $pfSense_Aliases[$i][0] = $pfSense_Type[1]
        $pfSense_Aliases[$i][1] = $pfSense_Name[1]
        $pfSense_Aliases[$i][2] = $pfSense_Address[1]
        $pfSense_Aliases[$i][3] = $pfSense_Description[1]
        $pfSense_Aliases[$i][4] = $pfSense_Detail[1]
    Next
Return $pfSense_Aliases
EndFunc  ;==>GetAliases

This doesnt work!

#include <Array.au3>
#include <_XMLDomWrapper.au3>
$pfSense_Aliases = pfSenseGetAliases(@ScriptDir & "\config.xml")

MsgBox(0,"All",$pfSense_Aliases[0][0][0])
MsgBox(0,"Hosts",$pfSense_Aliases[0][0][0])
MsgBox(0,"Networks",$pfSense_Aliases[2][0][0])
MsgBox(0,"Ports",$pfSense_Aliases[3][0][0])

Func pfSenseGetAliases($pfSense_XMLFile)
    $res = _XMLFileOpen($pfSense_XMLFile)
    If $res=0 Then
        MsgBox(0,"","File not found")
        Exit
    EndIf
    $pfSense_AliasCount = _XMLGetNodeCount("/pfsense/aliases/alias")
    Local $pfSense_Aliases[4][$pfSense_AliasCount + 1][5]
    $pfSense_Aliases[0][0][0] = $pfSense_AliasCount
        $pfSense_Aliases_HostCount=0
        $pfSense_Aliases_NetworkCount=0
        $pfSense_Aliases_PortCount=0
    For $i = 1 To $pfSense_Aliases[0][0][0] Step 1
        $pfSense_Name = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/name")
        $pfSense_Address = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/address")
        $pfSense_Description = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/descr")
        $pfSense_Type = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/type")
        $pfSense_Detail = _XMLGetValue("/pfsense/aliases/alias[" & $i & "]/detail")
        Select
            Case $pfSense_Type="host"
                $pfSense_Aliases_HostCount = $pfSense_Aliases_HostCount + 1
                $pfSense_Aliases[1][$pfSense_Aliases_HostCount][1] = $pfSense_Name[1]
                $pfSense_Aliases[1][$pfSense_Aliases_HostCount][2] = $pfSense_Address[1]
                $pfSense_Aliases[1][$pfSense_Aliases_HostCount][3] = $pfSense_Description[1]
                $pfSense_Aliases[1][$pfSense_Aliases_HostCount][4] = $pfSense_Detail[1]
            Case $pfSense_Type="network"
                $pfSense_Aliases_NetworkCount = $pfSense_Aliases_NetworkCount + 1
                $pfSense_Aliases[2][$pfSense_Aliases_NetworkCount][1] = $pfSense_Name[1]
                $pfSense_Aliases[2][$pfSense_Aliases_NetworkCount][2] = $pfSense_Address[1]
                $pfSense_Aliases[2][$pfSense_Aliases_NetworkCount][3] = $pfSense_Description[1]
                $pfSense_Aliases[2][$pfSense_Aliases_NetworkCount][4] = $pfSense_Detail[1]
            Case $pfSense_Type="port"
                $pfSense_Aliases_PortCount = $pfSense_Aliases_PortCount + 1
                $pfSense_Aliases[3][$pfSense_Aliases_PortCount][1] = $pfSense_Name[1]
                $pfSense_Aliases[3][$pfSense_Aliases_PortCount][2] = $pfSense_Address[1]
                $pfSense_Aliases[3][$pfSense_Aliases_PortCount][3] = $pfSense_Description[1]
                $pfSense_Aliases[3][$pfSense_Aliases_PortCount][4] = $pfSense_Detail[1]
        EndSelect
    Next
        $pfSense_Aliases[1][0][0] = $pfSense_Aliases_HostCount
        $pfSense_Aliases[2][0][0] = $pfSense_Aliases_NetworkCount
        $pfSense_Aliases[3][0][0] = $pfSense_Aliases_PortCount
Return $pfSense_Aliases
EndFunc  ;==>GetAliases

weaponx · February 1, 2009

Okay, how can I test this without an XML file? Also don't say "this doesn't work" because that means nothing. Describe expected versus actual results.

ghetek · February 1, 2009

Okay, how can I test this without an XML file? Also don't say "this doesn't work" because that means nothing. Describe expected versus actual results.

I'm sorry, I've been so spacey lately trying to figure this out. OK what im trying to do here is create a 3 dimension array. The first dimension will hold either a 1, 2, or 3. this signifies Host, Network, and Port. The second dimension is how many records. and the last is changed to find values.

so here is the template

$pfsense_Aliases[which table (1=host, 2=network, 3=port)][which record][what value (1=home, 2=name, 3=description, 4=detail)]

so...

$pfSense_Aliases[1][4][3]
[1]=[host]
[4]=[which host]
[3]=Description

here is what the xml looks like

<pfsense>
   <aliases>
      <alias>
         <name>DEV_BrotherMFC_LAN</name>
         <address>192.168.1.14</address>
         <descr>Brother MFC Device</descr>
         <type>host</type>
         <detail>Brother MFC Device||</detail>
      </alias>
      <alias>
         <name>DEV_BrotherMFC_LAN2</name>
         <address>192.168.1.15</address>
         <descr>Brother MFC Device2</descr>
         <type>host</type>
         <detail>Brother MFC Device2||</detail>
      </alias>
   </aliases>
</pfsense>

initially the "Type" which signifies if the alias is a host, network, or port was a value within the last dimension but i felt that it should be a dimension on its own seeing as how its a field that contains duplicate data.

Edited February 1, 2009 by ghetek

weaponx · February 1, 2009

I have a strong feeling you are trying to use a three dimensional array when you only need two.

A two dimensional array is the same thing as a spreadsheet. For each row you can have as many columns as you would like. In this case the rows are the "alias" nodes, and the columns are each of the nodes within each "alias" parent.

Your array should look like this:

$array[0][0]: DEV_BrotherMFC_LAN

$array[0][1]: 192.168.1.14

$array[0][2]: Brother MFC Device

$array[0][3]: host

$array[0][4]: Brother MFC Device||

$array[1][0]: DEV_BrotherMFC_LAN2

$array[1][1]: 192.168.1.15

$array[1][2]: Brother MFC Device2

$array[1][3]: host

$array[1][4]: Brother MFC Device2||

ghetek · February 1, 2009

I have a strong feeling you are trying to use a three dimensional array when you only need two.

A two dimensional array is the same thing as a spreadsheet. For each row you can have as many columns as you would like. In this case the rows are the "alias" nodes, and the columns are each of the nodes within each "alias" parent.

Your array should look like this:
$array[0][0]: DEV_BrotherMFC_LAN
$array[0][1]: 192.168.1.14
$array[0][2]: Brother MFC Device
$array[0][3]: host
$array[0][4]: Brother MFC Device||

$array[1][0]: DEV_BrotherMFC_LAN2
$array[1][1]: 192.168.1.15
$array[1][2]: Brother MFC Device2
$array[1][3]: host
$array[1][4]: Brother MFC Device2||

Maybe i need to explain further

Each entry can be classified as either a host, a network, or a port

after that every entry has a single name and description.

after that each entry has its own array created from the addresses and details. details are delimited by "||" and addresses are delimited by a space.

<alias>
    <name>SVR_SBS_LAN_Ports</name>
    <address>3389 25 80 444 4125 443 27015</address>
    <descr>Small Business Server Ports</descr>
    <type>port</type>
    <detail>RDP||Exchange||HTTP||Sharepoint||RWW||SSL||HalfLifeCS||</detail>
</alias>

trunc.ate · February 2, 2009

I tested

this script posted in this thread earlier (can't quote for whatever reason).

I just added

#Include <_XMLDomWrapper.au3>
#include <array.au3>

above the code and left the rest as provided. Of course I created that books.xml first. Whatever, all I get is the error

Subscript used with non-Array variable

What am I doing wrong?

marcushe · February 2, 2009

Need a hand to help me!!!!!Support for XPath in MsXML6.0,I can't get my needed notes by XPath

Environment:XPP SP3,English

Tool:Autoit3 with _XMLDomWrapper.au3

Target:From unattend.xml(when installing XP or Vista, you 'll use), delete /unattend/settings [pass="oobeSystem"]/Component[name="Microsoft-Windows-Shell-Setup"]/OOBE

.

Unattend.xml:

<?xml version="1.0" encoding="utf-8"?>

</settings>

<OOBE><HideEULAPage>false</HideEULAPage></OOBE>

</component>

</settings>

Steps:

Questioin:

1. xpath="/unattend/*" , No children notes ?

2. xpath="/*",result notes are :servicing,seetings, except unattend ?

3. xpath="/",result is unattend

4. xpath="//settings[1]",No children notes?

5.Xpath="/unattend/settings[@pass=" & Chr(39) & "oobeSystem" & Chr(39) & "]/component[@name=" & Chr(39) & "Microsoft-Windows-Shell-Setup" & Chr(39) & "]"

Spitting blood to ask a help....

marcushe · February 2, 2009

Need a hand to help me!!!!!Support for XPath in MsXML6.0,I can't get my needed notes by XPath

Environment:XPP SP3,English
Tool:Autoit3 with _XMLDomWrapper.au3
Target:From unattend.xml(when installing XP or Vista, you 'll use), delete /unattend/settings [pass="oobeSystem"]/Component[name="Microsoft-Windows-Shell-Setup"]/OOBE
.
..........................................

I've found the cause !!!! It's default namespace xmlns="urn:schemas-microsoft-com:unattend" hindering XPath to execute successfully.But i haven't find a way to use default namespace to execute XPath.

I've tried: setProperty ("SelectionNamespaces", "xmlns='urn:schemas-microsoft-com:unattend'")

but XPath result is still not correct.

marcushe · February 3, 2009

I've found the cause !!!! It's default namespace xmlns="urn:schemas-microsoft-com:unattend" hindering XPath to execute successfully.But i haven't find a way to use default namespace to execute XPath.
I've tried: setProperty ("SelectionNamespaces", "xmlns='urn:schemas-microsoft-com:unattend'")
but XPath result is still not correct.

Self resolved this case, read many article at Microsoft

instrument:

1. setProperty ("SelectionNamespaces", "xmlns:ns='urn:schemas-microsoft-com:unattend'") ' God. _XMLDomwrapper must be upgrade

' Or if XML used default namespace like xml="xxxxxx"

' we'll have trouble . We'll get nothing by XPath after

' invoke _XMLOpenFile

2. Then i can use Xpath="\ns:unattend\settings[@pass=" & Chr(34) & "oobeSystem" & "]\*"

Caution:

1. If use appendChild to insert a child node ,you must offer a namespace if defaultnamespace is used.

createNode(NodeElement,YourNodeName,YourNamespace) 'YourNamespace="urn:schemas-microsoft-com:unattend"

2.By default ,you 'll get a node like <xxxx /> unless you create another child note for it

trunc.ate · February 3, 2009

[_XMLGetValue-problems]

To specify that: I'm doing a

$search = _XMLGetValue ("Settings/Search")

To output $search I have two choices, both fail:

MsgBox(4096, "test", $search)

outputs -1 (which means failure), probably because _XMLGetValue is supposed to return an array.

MsgBox(4096, "test", $search[1])

outputs the error "Subscript used with non-Array variable"

VAG · February 3, 2009

Hi, I would like to create a XML like this how may I create a AutoIt function to do it?

<?xml version="1.0" ?>
<tree id="0">
    <item id="0000" text="parent item 1"> 
        <item id="0001" text="child item 1" />
        <item id="0002" text="child item 2" /> 
    </item>
    <item id="0003" text="parent item 1" /> 
</tree>

weaponx · February 3, 2009

Self resolved this case, read many article at Microsoft
instrument:
1. setProperty ("SelectionNamespaces", "xmlns:ns='urn:schemas-microsoft-com:unattend'") ' God. _XMLDomwrapper must be upgrade
' Or if XML used default namespace like xml="xxxxxx"
' we'll have trouble . We'll get nothing by XPath after
' invoke _XMLOpenFile

2. Then i can use Xpath="\ns:unattend\settings[@pass=" & Chr(34) & "oobeSystem" & "]\*"
Caution:
1. If use appendChild to insert a child node ,you must offer a namespace if defaultnamespace is used.
createNode(NodeElement,YourNodeName,YourNamespace) 'YourNamespace="urn:schemas-microsoft-com:unattend"
2.By default ,you 'll get a node like <xxxx /> unless you create another child note for it

Apparently you didn't read the list of parameters for _XMLFileOpen, and furthermore failed to read the many examples which I have presented in this topic using namespaces.

_XMLFileOpen($sXMLFile,[$sNamespace=""],[$ver=-1])

weaponx · February 3, 2009

To specify that: I'm doing a
$search = _XMLGetValue ("Settings/Search")

That isn't valid Xpath...read up on it.

http://www.w3schools.com/xpath/xpath_syntax.asp

weaponx · February 3, 2009

Hi, I would like to create a XML like this how may I create a AutoIt function to do it?

<?xml version="1.0" ?>
<tree id="0">
    <item id="0000" text="parent item 1"> 
        <item id="0001" text="child item 1" />
        <item id="0002" text="child item 2" /> 
    </item>
    <item id="0003" text="parent item 1" /> 
</tree>

There are plenty of examples for creating nodes with attributes.

#541825

JSThePatriot · February 3, 2009

weaponx,

Boy this is a full time job! What would it take to get these functions included in the UDF's for AutoIt, this way you could potentially refer to a help file entry about most of this stuff.

I was trying to keep track of the posts, and then noticed how many new people were posting with other problems...good job on supplying the answers!

Jarvis

weaponx · February 3, 2009

The UDF has been pretty reliable for me. I could document each function and provide examples for submission.

The last contact I had with eltorro was August 12th, 2008 and he was planning on creating a new version that allowed multiple documents to be handled simultaneously. Its a nice idea but the implementation might be ugly.

XML DOM wrapper (COM)

Recommended Posts

Link to comment

Share on other sites

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

eltorro

Syed23

Posted Images

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members