copy excel column data to another program to paste them

Morphice · January 11, 2019

Hello ,

I am new to autoIT, I am wondering if someone could guide me in the correct path for this program. Attached are the steps for the program as well as what I currently have. Any help is greatly appreciated . Thank You.

* workbooks\sheets will be organized on per level basis , 1st sheet lvl 1 ,2nd sheet lvl 2 etc or workbook 1 = level 1, workbook 2 = level 2 etc.

; = comments and reminders

#include <MsgBoxConstants.au3>
#include <EditConstants.au3>
#include<excel.au3>
#include<Array.au3>

Global Const $PatientLookupX = 320
Global Const $PatientLookupY = 64 ; down 1 and enter

Global Const $PatientTextBoxX = 410
Global Const $PatientTextBoxY = 217  ; click , Ctrl + V , Enter

Global Const $PHMhubX = 512
Global Const $PHMhubY = 613   ;click down 1 enter button

Global Const $HealthRiskAssesmetX = 40
Global Const $HealthRiskAssesmetY = 162

Global Const $AddnewAssesmentX = 168
Global Const $AddnewAssesmentY = 98

Global Const $SelectAssesmentX = 342
Global Const $SelectAssesmentY = 98   ; Down 7 and enter Risk score new

Global Const $EmptyAnswerBarX = 465
Global Const $EmptyAnswerBarY = 145

Global Const $LowriskpreventionX = 716
Global Const $LowriskpreventionY = 324

Global Const $MediumriskPreventionX = 716
Global Const $MediumriskPreventionY = 352

Global Const $HighriskPreventionX = 716
Global Const $HighriskPreventionY = 377

Global Const $CatatrosphicPreventionX = 714
Global Const $CatatrosphicPreventionY = 399

Global Const $ClosebuttonX = 1167
Global Const $ClosebuttonY = 666

Global Const $SaveRiskButtonX = 1161
Global Const $SaveRiskButtonY = 692

Global Const $ExitCPScreenX = 1339
Global Const $ExitCPScreenY = 8

Global Const $ExitpatientHubX = 1000
Global Const $ExitpatientHubY = 79

Global Const $sleepMod = 2
Global Const $sleepVal = 5000*$sleepMod
Global Const $sleepLow = 200*$sleepMod
Global Const $sleepMed = 1000*$sleepMod
Global Const $sleepHigh = 3500*$sleepMod

;Function Open excel , read account number in column A
;-------------------------------------------------------------------------------------------------------------------------------------------------------
HotKeySet("{ESC}","stopbaby")

Func _WinWaitActivate($title,$text,$timeout=0)
    $hWnd = WinWait($title,$text,$timeout)
    If Not WinActive($title,$text) Then WinActivate($title,$text)
    WinWaitActive($title,$text,$timeout)
EndFunc

$i=0
While
    $i <=2
$i = $i+1
Local $Open_excel = _Excel_Open()
Local $File_path = "D:\AutoIT\Risk_Test.xlsx"
Local $Open_workbook = _Excel_BookOpen($Open_excel,$File_path)
WinActivate($Open_workbook)
Local $Read_account_number = _Excel_RangeRead($Open_workbook,default,"A" &$i)
_Excel_Close($Open_excel,False)
WEnd
;---------------------------------------------------------------------------------------------------------------------------------------------------

Func NavtoSearch()
    WinActivate(eClinicalWorks (Garcia,Erick)

    Sleep($sleepMed)
    MouseClick("",693,77)
    Send("!p") ; shortcut for patient menu
    Send("{DOWN}") ; down 1
    send ("{Enter}") ; patient lookup
    Sleep($sleepMed)
       ;paste account number  How would I do this???
    Send("{Enter}") ;Once patient is found, + enter = takes you to patient hub
    Sleep($sleepMed)
Next
NavtoPHMHub()
;-------------------------------------------------------------------------------------------------------------------------------------------------------
Func NavtoPHMHub()
    MouseClick("",$PHMhubX,$PHMhubY)
    Sleep($sleepLow)
    Send("{DOWN}")
    Send("{ENTER}") ;takes you to Care Plan HUB
Next
NavtoRiskScore()
;-------------------------------------------------------------------------------------------------------------------------------------------------------
Func NavtoRiskScore()
    MouseClick("",$HealthRiskAssesmetX,$HealthRiskAssesmetY) ;Clicks on HealthRisk assesment
    Sleep($sleepLow)
    MouseClick("",$AddnewAssesmentX,$AddnewAssesmentY) ; Click addnew assesment
    Sleep($sleepLow)
    MouseClick("",$SelectAssesmentX,$SelectAssesmentY) ;click select assesment tab
    Sleep($sleepLow)
    Send("{DOWN 7}")
    Send("{ENTER}")
    Sleep($sleepLow)
    MouseClick("",$EmptyAnswerBarX,$EmptyAnswerBarY) ;Click on Empty answer bar
    Sleep($sleepLow)
    MouseClick("",$LowriskpreventionX,$LowriskpreventionY) ; selects Risk Score, Change for other types 1-6
Next
NavtoNextPatient()

Func NavtoNextPatient
    MouseClick("",$ClosebuttonX,$ClosebuttonY)
    MouseClick("",$SaveRiskButtonX,$SaveRiskButtonY)
    MouseClick("",$ExitCPScreenX,$ExitCPScreenY)
    MouseClick("",$ExitpatientHubX,$ExitpatientHubY)
EndFunc
;Function should loop back to excel sheet, copy next account number, activate eclinicalworks, and repeat the steps
;---------------------------------------------------------------------------------------------------------------------------------------------------------
Func stopbaby()
   exit
EndFunc

Best Regards,

Morphice

steps for program.docx

FrancescoDiMuro · January 11, 2019

@Morphice

Instead of using mouse clicks and send keys, I suggest you to use Word UDF and Excel UDF, whi h you can find in the UDF secrion on the Forum.

To send the data to another application, then you can use Control* functions

Morphice · January 12, 2019

Hello F.DiMuro ,

I will be only using Excel and a program called eclinical works. My current problem is how to incrementally copy data that is in one column. and Paste it in another program, and continue doing this until there is no more data in that column. If you could provide me with some hints as to how to go about this? It would be greatly appreciated. Thank You.

FrancescoDiMuro · January 12, 2019

@Morphice

The Help file is full of examples

Take a look at Excel_RangeCopyPaste() to copy your data from Excel to the Clipboard (third example).

From the Clipboard, then, you can manage your data as you want.

Take a look at AutoItWindowInfoTool to get the information about the control you are going to paste the data, using Control* functions or others.

Morphice · January 13, 2019

Thank you. I will let you know the results.

Morphice · January 20, 2019

Hello, I am wondering if you could help me. The program works, except I do not know how to increment it when it goes back to excel. I am wondering if you could provide guidance on this?

currently the program runs, clicks on cell A1 copies the information , sends esc to get rid of the dashed box in excel that states this cell has been selected. And runs through the rest of the program fine. But I do not know how to get it to step down 1 cell without clicking on cell A1 again. Any help is appreciated.

#include <Excel.au3>
#include <File.au3>
#include <Array.au3>

Global Const $PatientLookupX = 320
Global Const $PatientLookupY = 64 ; down 1 and enter

Global Const $PatientTextBoxX = 410
Global Const $PatientTextBoxY = 217  ; click , Ctrl + V , Enter

Global Const $PHMhubX = 512
Global Const $PHMhubY = 613   ;click down 1 enter button

Global Const $HealthRiskAssesmetX = 40
Global Const $HealthRiskAssesmetY = 162

Global Const $AddnewAssesmentX = 168
Global Const $AddnewAssesmentY = 98

Global Const $SelectAssesmentX = 342
Global Const $SelectAssesmentY = 98   ; Down 7 and enter Risk score new

Global Const $EmptyAnswerBarX = 465
Global Const $EmptyAnswerBarY = 145

Global Const $LowriskpreventionX = 716
Global Const $LowriskpreventionY = 324

Global Const $MediumriskPreventionX = 716
Global Const $MediumriskPreventionY = 352

Global Const $HighriskPreventionX = 716
Global Const $HighriskPreventionY = 377

Global Const $CatatrosphicPreventionX = 714
Global Const $CatatrosphicPreventionY = 399

Global Const $ClosebuttonX = 1167
Global Const $ClosebuttonY = 666

Global Const $SaveRiskButtonX = 1161
Global Const $SaveRiskButtonY = 692

Global Const $ExitCPScreenX = 1339
Global Const $ExitCPScreenY = 8

Global Const $ExitpatientHubX = 1000
Global Const $ExitpatientHubY = 79

Global Const $sleepMod = 2
Global Const $sleepVal = 5000*$sleepMod
Global Const $sleepLow = 200*$sleepMod

Global Const $sleepMed = 1000*$sleepMod
Global Const $sleepHigh = 3500*$sleepMod

$nPatients = InputBox("Question","Number of patients?")
$jmp = InputBox("Question","Begin on what patient? (Default should be 1)")
$jmp = $jmp - 1
sleep(3000)

For $i = $jmp to $nPatients Step 1
WinActivate("Risk_Test")
Sleep(3000)
MouseClick("",61,236) ;clicks A1
sleep(3000)
Send("{CTRLDOWN}c{CTRLUP}")
Sleep($sleepLow)
Send("{ESC}")
sleep(3000)
   For $y = 0 To ($i-1) Step 1
      Send("{DOWN}")
      sleep($sleepLow)
   Next
   NavtoSearch()
Next
MsgBox($MB_SYSTEMMODAL,"","Program Complete!")


Func NavtoSearch()
WinActivate("eClinicalWorks (Garcia,Erick )  ")
    Sleep($sleepMed)
    MouseClick("",693,77)
    Send("!p") ; shortcut for patient menu
    Send("{DOWN}") ; down 1
    send ("{Enter}") ; patient lookup
    Sleep($sleepMed)
    Send("{CTRLDOWN}v{CTRLUP}")
    Send("{Enter}") ;Once patient is found, + enter = takes you to patient hub
    Sleep($sleepMed)
    ;start PHM HUb---------------------------------------------------------------------------------------------------------
    MouseClick("",$PHMhubX,$PHMhubY)
    Sleep($sleepLow)
    Send("{DOWN}")
    Send("{ENTER}") ;takes you to Care Plan HUB
    sleep($sleepMed)
    ;Start Nav to risk score ---------------------------------------------------------------------------------------------
    MouseClick("",$HealthRiskAssesmetX,$HealthRiskAssesmetY) ;Clicks on HealthRisk assesment
    Sleep($sleepMed)
    MouseClick("",$AddnewAssesmentX,$AddnewAssesmentY) ; Click addnew assesment
    Sleep($sleepMed)
    MouseClick("",$SelectAssesmentX,$SelectAssesmentY) ;click select assesment tab
    Sleep($sleepMed)
    Send("{DOWN 7}")
    Send("{ENTER}")
    Sleep($sleepMed)
    MouseClick("",$EmptyAnswerBarX,$EmptyAnswerBarY) ;Click on Empty answer bar
    Sleep($sleepMed)
    MouseClick("",$LowriskpreventionX,$LowriskpreventionY) ; selects Risk Score, Change for other types 1-6
    Sleep($sleepHigh)
    ;Start Next Patient-------------------------------------------------------------------------------------------------
    MouseClick("",$ClosebuttonX,$ClosebuttonY)
    Sleep($sleepMed)
    MouseClick("",$SaveRiskButtonX,$SaveRiskButtonY)
    Sleep($sleepMed)
    MouseClick("",$ExitCPScreenX,$ExitCPScreenY)
    Sleep($sleepMed)
    MouseClick("",$ExitpatientHubX,$ExitpatientHubY)
    Sleep($sleepMed)
EndFunc

;Func stopbaby()
 ;  exit
;EndFunc

Morphice · January 20, 2019

@FrancescoDiMuro

BrewManNH · January 21, 2019

Use the _Excel* UDF instead of clicking and copying/pasting from the screen. MouseClick and Send should be the last resort, not the first.

FrancescoDiMuro · January 21, 2019

@Morphice

Didn't you look at Excel UDF as I've already suggested you?

Morphice · January 21, 2019

@FrancescoDimuro

@BrewManNH

Sorry I did not attach the other part of the code. It is copying cell A1 at the moment. I am having trouble on how to go about incremental copy the cell (column) + paste in another program. Sorry I should have uploaded this earlier.

#include <Excel.au3>
#include <File.au3>
#include <Array.au3>



Local $oExcel=_Excel_Open()
Local $sWorkBook = "D:\AutoIT\Risk_Test.xlsx"
Local $oWorkBook = _Excel_BookOpen($oExcel,$sWorkBook)
WinActivate($oWorkBook)
sleep(3000)
$test = _Excel_RangeCopyPaste($oWorkBook.Activesheet,"A1")

Morphice · February 12, 2019

@FrancescoDiMuro

@BrewManNH

Below is the updated code

Progress-

The code compiles and runs , however the loop doesn't stop because it can't get to the stop criteria. And I'm not too sure how to get the loop to increment to the next cell. Any help is appreciated. Thank you.

#include <Excel.au3>
#include <File.au3>
#include <Array.au3>
HotKeySet("{ESC}","stopbaby")

Global Const $sleepMod = 2
Global Const $sleepVal = 5000*$sleepMod
Global Const $sleepLow = 200*$sleepMod

Global Const $sleepMed = 1000*$sleepMod
Global Const $sleepHigh = 3500*$sleepMod

Local $oExcel=_Excel_Open()
Local $sWorkBook = "D:\AutoIT\Risk_Test.xlsx"
Local $oWorkBook = _Excel_BookOpen($oExcel,$sWorkBook)
WinActivate($oWorkBook)
sleep(3000)

Do
WinActivate("Risk_Test")
$test = _Excel_RangeCopyPaste($oWorkBook.Activesheet,"A1")
sleep(3000)
 ;Send("{CTRLDOWN}c{CTRLUP}") ;Copy cell
 ;------------------------------------------------Excel statements above to manipulate data
WinActivate("eClinicalWorks (Garcia,Erick )  ")
Sleep($sleepMed)
    MouseClick("",693,77)
    Send("!p") ; shortcut
    Send("{DOWN}") ; down 1
    send ("{Enter}") ; patient lookup
    Sleep($sleepMed)
Send("{CTRLDOWN}v{CTRLUP}") ;Paste cell
Send("{Enter}") ;Once patient is found, + enter = takes you to patient hub
Sleep($sleepMed)
;--------------------------------------------------Eclinical workflow
WinActivate("Risk_Test") ;Go down a cell
Send("{ENTER}{ENTER}")
    until $test =""
;---------------------------------------Go back to excel and repeat the process, or put the process at the start $i +=[$a]


;for $i =0 to UBound($test)-1
; eclinical workflow---
;Next
; _Excel_Close($oWorkBook)


;Send("{CTRLDOWN}v{CTRLUP}")
;Run("D:\AutoIT\Risk_Test.xlsx")
;Send("{CTRLDOWN}v{CTRLUP}")


Func stopbaby()
   exit
EndFunc

Morphice · February 12, 2019

Version 2

I tried using the Ubound feature, could you provide advice on which route to go with? Thank You.

#include <Excel.au3>
#include <File.au3>
#include <Array.au3>
#include <MsgBoxConstants.au3>
HotKeySet("{ESC}","stopbaby")

Global Const $sleepMod = 2
Global Const $sleepVal = 5000*$sleepMod
Global Const $sleepLow = 200*$sleepMod

Global Const $sleepMed = 1000*$sleepMod
Global Const $sleepHigh = 3500*$sleepMod

Local $oExcel=_Excel_Open()
Local $sWorkBook = "D:\AutoIT\Risk_Test.xlsx"
Local $oWorkBook = _Excel_BookOpen($oExcel,$sWorkBook)
WinActivate($oWorkBook)
sleep(3000)
WinActivate("Risk_Test")

Local $testarray = _Excel_RangeCopyPaste($oWorkBook.Activesheet,"A1")
If @error Then Exit MsgBox(0, "", "Error when copying WorkbookIn. @error = " & @error)

for $i = 0 To UBound($testarray)-1
Next
WinActivate("eClinicalWorks (Garcia,Erick )")
    Sleep($sleepMed)
    MouseClick("",693,77)
    Send("!p") ; shortcut
    Send("{DOWN}") ; down 1
    send ("{Enter}") ; patient lookup
    Sleep($sleepMed)
Send("{CTRLDOWN}v{CTRLUP}") ;Paste cell
Send("{Enter}") ;Once patient is found, + enter = takes you to patient hub
Sleep($sleepMed)
if $testarray[$i]= "" Then MsgBox($MB_ICONERROR, "Error!!!", "Range A" & $i & " is Blank")


#cs
For $i = 0 to UBound($testarray, 1) - 1
If $testarray[$i]= " " then stopbaby()
Next
WinActivate("Test_RiskScore")
Send("{CTRLDOWN}v{CTRLUP}") ;Paste cell
Send("{Enter}")
Sleep($sleepMed)
_Excel_Close($oWorkBook)
#ce
 Func stopbaby()
   exit
EndFunc

Earthshine · February 12, 2019

nm... The Excel UDF can probably do everything you need to do without sending keystrokes though.

Edited February 12, 2019 by Earthshine

Morphice · February 12, 2019

@Earthshine

Am I on the right track? Or do you suggest restarting it with a different approach? The current program works , I require assistance with the loop function.

Nine · February 12, 2019

I think your problem resides in that line :

Local $testarray = _Excel_RangeCopyPaste($oWorkBook.Activesheet,"A1")

If you read the help file : Success: the object of the target range if $vTargetRange <> Default, else 1. So in all situations, the return value is NOT an array. It is either an object or the value 1. In your case it is the value 1. And like @Earthshine said you should try to eliminate all send () commands and use the functions inside the UDF.

PS. winactivate () with an object is an error. If you test the result, you will see it...

Edited February 12, 2019 by Nine

Subz · February 12, 2019

Using _Excel_RangeCopyPaste copies to the clipboard so you would need to ClipGet() to obtain the information. What you probably want to use is _Excel_RangeRead, you can then use this within a loop (Only if you use more than 1 cell, if you only point it at A1 for example it will only return the string not an array).

Correct me if I'm wrong but "eClinicalWorks (Garcia,Erick )" is a third-party program, if so, using the Autoit WIndow Info Tool (installed with Autoit), point it at "eClinicalWorks (Garcia,Erick )" and get the Control id information, then use ControlSend to send the data to each field.

Just for reference, in your code above you would need to move the "Next" below the line "if $testarray[$i]=..." otherwise it wouldn't loop, although as I mentioned above it wouldn't work because you were copying the data to clipboard so the "For $i = 0 To Ubound($testarray[$i]) - 1" wouldn't work as the latter wasn't an array.

Earthshine · February 12, 2019

2 hours ago, Morphice said:

@Earthshine

Am I on the right track? Or do you suggest restarting it with a different approach? The current program works , I require assistance with the loop function.

just look at @Subz and @Nine comments above me here.

Edited February 12, 2019 by Earthshine

Nine · February 12, 2019

@Subz did summarize it well. Instead of using a single cell "A1", try using the whole range for your needs like "A1:A20" :

Local $aRange = _Excel_RangeRead ($sWorkBook,Default,"A1:A20")

That way you would create an array of 20 elements. Then you can use a loop to transfert information directly from the array without having to read the clipboard...

Morphice · February 15, 2019

@Nine @Subz

Hello, Below is the updated code. The process of the third party application (eclinicalWorks ) functions . However I'm still stuck on how to create a loop for an incremental copy paste of cells and paste into the appropriate field in the application. If you could provide feedback on this, it would be greatly appreciated.

#include <Excel.au3>
#include <File.au3>
#include <Array.au3>
#include <MsgBoxConstants.au3>

HotKeySet("{ESC}","stopbaby")

Global Const $PatientLookupX = 320
Global Const $PatientLookupY = 64 ; down 1 and enter

Global Const $PatientTextBoxX = 410
Global Const $PatientTextBoxY = 217  ; click , Ctrl + V , Enter

Global Const $PHMhubX = 512
Global Const $PHMhubY = 613   ;click down 1 enter button

Global Const $HealthRiskAssesmetX = 40
Global Const $HealthRiskAssesmetY = 162

Global Const $AddnewAssesmentX = 168
Global Const $AddnewAssesmentY = 98

Global Const $SelectAssesmentX = 342
Global Const $SelectAssesmentY = 98   ; Down 7 and enter Risk score new

Global Const $EmptyAnswerBarX = 465
Global Const $EmptyAnswerBarY = 145

Global Const $LowriskpreventionX = 716
Global Const $LowriskpreventionY = 324

Global Const $MediumriskPreventionX = 716
Global Const $MediumriskPreventionY = 352

Global Const $HighriskPreventionX = 716
Global Const $HighriskPreventionY = 377

Global Const $CatatrosphicPreventionX = 714
Global Const $CatatrosphicPreventionY = 399

Global Const $ClosebuttonX = 1167
Global Const $ClosebuttonY = 666

Global Const $SaveRiskButtonX = 1161
Global Const $SaveRiskButtonY = 692

Global Const $ExitCPScreenX = 1339
Global Const $ExitCPScreenY = 8

Global Const $ExitpatientHubX = 1000
Global Const $ExitpatientHubY = 79

Global Const $sleepMod = 2
Global Const $sleepVal = 5000*$sleepMod
Global Const $sleepLow = 200*$sleepMod
Global Const $sleepMed = 1000*$sleepMod
Global Const $sleepHigh = 3500*$sleepMod
;--------------------------------------Static Variables-----------------------------------------------------
Local $oExcel=_Excel_Open()
Local $sWorkBook = "D:\AutoIT\Risk_Test.xlsx"
Local $oWorkBook = _Excel_BookOpen($oExcel,$sWorkBook)
WinActivate($oWorkBook)
WinActivate("Risk_Test")

;-------------------------------------Open workbook---------------------------------
Local $aRange = _Excel_RangeRead($oWorkBook,Default,"A1:A5")

for $i = 0 To UBound($aRange)-1 step +1
    Sleep($sleepMed)
    WinActivate("eClinicalWorks (Garcia,Erick )  ")
    Sleep($sleepMed)
    MouseClick("",693,77)
    Send("!p") ; shortcut
    Send("{DOWN}") ; down 1
    send ("{Enter}") ; patient lookup
    Sleep($sleepMed)
    Send("{CTRLDOWN}v{CTRLUP}")
    Send("{Enter}") ;Once patient is found, + enter = takes you to patient hub
    Sleep($sleepMed)
    MouseClick("",$PHMhubX,$PHMhubY)
    Sleep($sleepLow)
    Send("{DOWN}")
    Send("{ENTER}") ;takes you to Care Plan HUB
    MouseClick("",$HealthRiskAssesmetX,$HealthRiskAssesmetY) ;Clicks on HealthRisk assesment
    Sleep($sleepLow)
    MouseClick("",$AddnewAssesmentX,$AddnewAssesmentY) ; Click addnew assesment
    Sleep($sleepLow)
    MouseClick("",$SelectAssesmentX,$SelectAssesmentY) ;click select assesment tab
    Sleep($sleepLow)
    Send("{DOWN 7}")
    Send("{ENTER}")
    Sleep($sleepLow)
    MouseClick("",$EmptyAnswerBarX,$EmptyAnswerBarY) ;Click on Empty answer bar
    Sleep($sleepLow)
    MouseClick("",$LowriskpreventionX,$LowriskpreventionY) ; selects Risk Score, Change for other types 1-6
    MouseClick("",$ClosebuttonX,$ClosebuttonY)
    MouseClick("",$SaveRiskButtonX,$SaveRiskButtonY)
    MouseClick("",$ExitCPScreenX,$ExitCPScreenY)
    MouseClick("",$ExitpatientHubX,$ExitpatientHubY)
if $aRange[$i]= "" Then Exit
Next
MsgBox($MB_SYSTEMMODAL,"","Program Complete!")
;-------------------------------------------------------------------------------------------------------------------------------------------------------

 Func stopbaby()
   exit
EndFunc

ex

Copy cell A1

run script

paste

complete script

Copy call A2

run script

paste

complete script

etc...

FrancescoDiMuro · February 15, 2019

@Morphice

You have been already suggested to use Control* and Win* functions, plus the Excel UDF to retrieve data from Excel, and interact later with your application.

In this way, you avoid to use Mouse* and Send functions, which are surely great functions, but when more reliability is needed, better use Win* and Control* functions

Have you already checked the AutoItWindowInfoTool?

Block all input without UAC	Save/Retrieve Images to/from Text	Monitor Management (VCP commands)
Tool to search in text (au3) files	Date Range Picker	Virtual Desktop Manager
Sudoku Game 2020	Overlapped Named Pipe IPC	HotString 2.0 - Hot keys with string
x64 Bitwise Operations	Multi-keyboards HotKeySet	Recursive Array Display
Fast and simple WCD IPC	Multiple Folders Selector	Printer Manager
GIF Animation (cached)	Screen Scraping	Multi-Threading Made Easy

Block all input without UAC	Save/Retrieve Images to/from Text	Monitor Management (VCP commands)
Tool to search in text (au3) files	Date Range Picker	Virtual Desktop Manager
Sudoku Game 2020	Overlapped Named Pipe IPC	HotString 2.0 - Hot keys with string
x64 Bitwise Operations	Multi-keyboards HotKeySet	Recursive Array Display
Fast and simple WCD IPC	Multiple Folders Selector	Printer Manager
GIF Animation (cached)	Screen Scraping	Multi-Threading Made Easy

copy excel column data to another program to paste them

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Similar Content