_AcrobatShow() error ntdll.dll 0xc000000d

[Simpel]

Hi,

since some days I become this error message exiting my app:

Eventviewer shows following data:

Name der fehlerhaften Anwendung: autoit3.exe, Version: 3.3.14.2, Zeitstempel: 0x55fc1979
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.1.7601.23864, Zeitstempel: 0x595fa490
Ausnahmecode: 0xc000000d
Fehleroffset: 0x000987e0

I stripped my code from 1500 lines down to 70:

expandcollapse popup

#include <GUIConstants.au3>
Global $g_sPathToPDF = ; path to some pdf file to show

Opt("GUIOnEventMode", 1) ; default ist 0 ; 1 bedeutet, daß bei Klick direkt die darunterbeschriebene Funktion ausgeführt wird
Global $g_hGUI_MAIN ; Haupt-GUI
Global $g_hDummy_Main ; Dummy um Fokus in der Haupt-GUI unsichtbar zu setzen
Global $g_hGUI_Pruefen ; GUI zum Prüfen aller PDF
Global $g_hGUI_PDF ; GUI PDF-Ansicht der ausgewählten PDF
Global $g_hPDF ; ActiveX control welches das PDF enthält
Global $g_oAcrobatReader ; AcrobatReaderObjekt in dem die PDF gezeigt werden

_GUI_Main()
GUISetOnEvent ($GUI_EVENT_CLOSE, "_Exit_Main" , $g_hGUI_MAIN)
While 1
    Sleep(1)
WEnd
Exit

Func _GUI_Main() ; GUI-MAIN
    $g_hGUI_MAIN = GUICreate("MAIN", 390, 390, 763, 372)
    GUISetFont(12)
    GUICtrlCreateButton("NEXT", 20, 20, 350, 55, $BS_DEFPUSHBUTTON) ; Default-Knopf
    GUICtrlSetOnEvent(-1, "_GUI_Pruefen")
    GUISetState(@SW_SHOW, $g_hGUI_MAIN) ; GUI anzeigen
EndFunc

Func _GUI_Pruefen() ; GUI zum Prüfen der PDF
    GUISetState(@SW_HIDE, $g_hGUI_MAIN) ; MAIN-GUI ausblenden
    Opt("GUIOnEventMode", 0) ; wieder auf Default gesetzt
    $g_hGUI_Pruefen = GUICreate("RIGHT", 490,950, 1057, 91, -1, $WS_EX_APPWINDOW, $g_hGUI_MAIN)
    _AcrobatShow($g_sPathToPDF, "", 367, 91, 674, 950, $g_hGUI_Pruefen) ; PDF-GUI erstellen
    GUISetState(@SW_SHOW, $g_hGUI_Pruefen) ; GUI-Prüfen anzeigen
    Local $msg
    While 1
        $msg = GuiGetMsg() ; Aktion mit der GUI registrieren
        Switch $msg ; je nach Aktion mit der GUI
            Case $GUI_EVENT_CLOSE ; X gedrückt
                $g_oAcrobatReader = "" ; zerstöre das Objekt AcrobatReader
                GUIDelete($g_hGUI_PDF) ; lösche die GUI-PDF
                GUIDelete($g_hGUI_Pruefen) ; lösche die GUI-Prüfen
                Opt("GUIOnEventMode", 1) ; Default 0
                GUISetState(@SW_SHOW, $g_hGUI_MAIN) ; MAIN-GUI wieder zeigen
                Return
        EndSwitch
    WEnd
EndFunc

Func _Exit_Main() ; ausführen, wenn die MAIN-GUI schließt
    ConsoleWrite("EXIT" & @CRLF)
    Exit
EndFunc

Func _AcrobatShow($sFile, $sTitle = "PDF ", $iLeft = 50, $iTop = 0, $iWidth = 1000, $iHeight = 700, $hWnd = "") ; GUI-PDF erstellen
    If FileExists($sFile) Then ; wenn das PDF existiert
        $g_oAcrobatReader = ObjCreate("AcroPDF.PDF.1")
        $g_oAcrobatReader.src = $sFile ; Quelle ist das File
        $g_oAcrobatReader.SetLayoutMode("SinglePage") ; default "SinglePage"
        $g_oAcrobatReader.SetPageMode("none") ; default "none"
        $g_oAcrobatReader.SetShowToolbar(0) ; Tool-Bar nicht zeigen 0
        $g_oAcrobatReader.SetShowScrollbars(0) ; Scroll-Balken nicht zeigen 0
        $g_oAcrobatReader.SetView("fit") ; "fit" falls wer eigene Einstellungen im Reader gespeichert hat
        $g_hGUI_PDF = GUICreate($sTitle, $iWidth, $iHeight, $iLeft, $iTop, -1, -1, $hWnd) ; GUI als Child zu GUI-PRUEFEN erstellen - es soll nicht aktiviert werden
        $g_hPDF = GUICtrlCreateObj($g_oAcrobatReader, 0, 0, $iWidth, $iHeight) ; Objekt für das PDF erstellen
        GUICtrlSetStyle($g_hPDF, $WS_VISIBLE) ; PDF anzeigen
        GUISetState(@SW_SHOW, $g_hGUI_PDF) ; GUI-PDF anzeigen
    Else
        MsgBox(0, 'ERROR', "No PDF found.")
    EndIf
EndFunc

Do following steps to prove:

- start app

- click "next" on main gui

- wait minimum 5 seconds (until the arrows left and right on "gui left" disappear)

- close gui left or right

- close main gui

- look on console written "EXIT" the last code line before exit

- now windows error message above appears

The funny thing is if I don't wait the 5 seconds (before the half transparent arrows disappear) closing the gui then I will get no win error message.

If I comment _AcrobatShow() out then the error never appears. So it seemed to be an acrobat reader issue. Every week at work there are a lot of updates, but there is no chance to know which one. But since one update this error happens.

Any solutions? Regards, Conrad

[Simpel]

Hi,

now I stripped the code down to 30 lines:

#include <GUIConstants.au3>
Global $g_sPathToPDF = ; fill in path to pdf
Global $g_hGUI, $g_oAcrobatReader, $g_hPDF

_AcrobatShow($g_sPathToPDF)
Local $msg
While 1
    $msg = GuiGetMsg()
    Switch $msg
        Case $GUI_EVENT_CLOSE
            $g_hPDF = ""
            $g_oAcrobatReader = ""
            GUIDelete($g_hGUI)
            ConsoleWrite("EXIT" & @CRLF)
            Exit
    EndSwitch
WEnd

Func _AcrobatShow($sFile, $sTitle = "PDF ", $iLeft = - 1, $iTop = - 1, $iWidth = 1000, $iHeight = 700)
    If FileExists($sFile) Then
        $g_oAcrobatReader = ObjCreate("AcroPDF.PDF.1")
        $g_oAcrobatReader.src = $sFile
        $g_hGUI = GUICreate($sTitle, $iWidth, $iHeight, $iLeft, $iTop, BitOR($GUI_SS_DEFAULT_GUI, $WS_CLIPCHILDREN))
        $g_hPDF = GUICtrlCreateObj($g_oAcrobatReader, 0, 0, $iWidth, $iHeight)
        GUISetState(@SW_SHOW, $g_hGUI)
    Else
        MsgBox(0, 'ERROR', "No PDF found.")
    EndIf
EndFunc

If I comment out:

  $g_hPDF = GUICtrlCreateObj($g_oAcrobatReader, 0, 0, $iWidth, $iHeight)
  GUICtrlSetStyle($g_hPDF, $WS_VISIBLE)

then the error doesn't occur. So it seemed to be something with that GUICtrlObject. Do I have to destroy $g_hPDF in another way then to set ""?

Conrad

[Danyfirex]

Hello. It's working right for me. Using Adobe Reader XI Version 11.0.11.18.

 

 

Saludos

[Simpel]

Thank you.

I use Adobe Acrobat Reader DC Version 2017.009.20044.

[Danyfirex]

Try to free the control and the object. Maybe that helps.

            GUICtrlDelete($g_hPDF)
            $g_oAcrobatReader = Null
            GUIDelete($g_hGUI)
            ConsoleWrite("EXIT" & @CRLF)

 

or maybe just free the object.

Saludos

[Simpel]

Nope.

GUICtrlDelete($g_hPDF) returns 1 but error occurs anyway.

55 minutes ago, Danyfirex said:

or maybe just free the object.

How to do that? I thought with $g_oAcrobatReader = Null it's done. Other possibility?

Conrad

[Simpel]

So, just to keep my colleagues smooth I suppress this error messages as long I don't have a real solution:

Func _SuppressErrorMessage()
    RegWrite("HKEY_CURRENT_USER\Software\Microsoft\Windows\Windows Error Reporting","DontShowUI", "REG_DWORD", 1)
    Local $sFileName = "XYZ"
    Local Const $sData = 'PING -n 10 127.0.0.1 > nul' & @CRLF _ 
                        & 'reg add "HKCU\Software\Microsoft\Windows\Windows Error Reporting" /v DontShowUI /t REG_DWORD /d 0 /f'
    Local Const $hFileOpen = FileOpen(@TempDir & '\' & $sFileName & '.bat', 2)
    If $hFileOpen = -1 Then
        RegWrite("HKEY_CURRENT_USER\Software\Microsoft\Windows\Windows Error Reporting","DontShowUI", "REG_DWORD", 0)
        Return SetError(1, 0, 0)
    EndIf
    FileWrite($hFileOpen, $sData)
    FileClose($hFileOpen)
    Return Run(@TempDir & '\' & $sFileName & '.bat', @TempDir, @SW_HIDE)
EndFunc

_SuppressErrorMesssage() is inserted right before exit. So nearly for 10 seconds no messages like this will be shown.

Conrad

[Skysnake]

Works here

>"C:\Program Files (x86)\AutoIt3\SciTE\..\AutoIt3.exe" "C:\Program Files (x86)\AutoIt3\SciTE\AutoIt3Wrapper\AutoIt3Wrapper.au3" /run /prod /ErrorStdOut /in "C:\AutoIt\Forum_SomePDFError\New AutoIt v3 Script.au3" /UserParams    
+>07:26:28 Starting AutoIt3Wrapper v.17.224.935.0 SciTE v.3.7.3.0   Keyboard:00000409  OS:WIN_10/  CPU:X64 OS:X64  Environment(Language:0409)  CodePage:0  utf8.auto.check:4
+>         SciTEDir => C:\Program Files (x86)\AutoIt3\SciTE   UserDir => C:\Users\user\AppData\Local\AutoIt v3\SciTE\AutoIt3Wrapper   SCITE_USERHOME => C:\Users\user\AppData\Local\AutoIt v3\SciTE 
>Running AU3Check (3.3.14.2)  from:C:\Program Files (x86)\AutoIt3  input:C:\AutoIt\Forum_SomePDFError\New AutoIt v3 Script.au3
+>07:26:28 AU3Check ended.rc:0
>Running:(3.3.14.2):C:\Program Files (x86)\AutoIt3\autoit3.exe "C:\AutoIt\Forum_SomePDFError\New AutoIt v3 Script.au3"    
--> Press Ctrl+Alt+Break to Restart or Ctrl+Break to Stop

Perhaps REMOVE and re-install Reader?

Also, check for Reader Security settings?

https://forums.adobe.com/thread/1955530

https://helpx.adobe.com/acrobat/kb/troubleshoot-problems-opening-pdfs.html

Skysnake