GUIListViewEx - New Version 11Dec 24

Champak · April 5, 2022

lol, would you believe I stopped at the last page because I thought I got all the pertinent information....and what do you know, the last page had the exact info that would have helped lol. READ EVERYTHING!!!! smh. Thanks, all good now.

Edited April 5, 2022 by Champak

Melba23 · April 13, 2022

[NEW VERSION] - 13 Apr 22

Changed: If completely emptying and reloading a ListView with user colour enabled, the WM_NOTIFY handler must be unregistered before the process is started and reregistered once it is over. To this end the parameters of _GUIListViewEx_MsgRegister now take one of 3 possible values:

True = Register handler
False = Unregister handler
Default = Do nothing

This permits any of the handlers to be un/reregistered without affecting the state of the others. The most obvious use is the un/reregistering of WM_NOTIFY as described above, but other scenarios could be envisaged.

New UDF in the first post.

M23

PowerJack · April 22, 2022

In my latest project I thought I needed your "GUIListViewEx.au3" because of the single cell selection capability (not complete row). It started out quite nice, but then I struggled with what you call “Programmatically select row - and item if single selection available” (Func _GUIListViewEx_SelectItem). I boiled my problem down to the example code below.

What I want to have is a ListView that has always only one cell selected. It works fine when I just click into the ListView cells. But when I try to select the cell via Func _GUIListViewEx_SelectItem() then I end up with multiple cells selected.

I had a brief look into your Func _GUIListViewEx_SelectItem() and, without understanding all of it, I suspect that the instruction _GUICtrlListView_SetItemSelected($hLVHandle, -1, False) doesn’t do what it is supposed to do in single cell selection mode.

Any ideas from this forum how I could possible sail around this problem would be highly welcome.

#include <GuiConstantsEx.au3>
#include <WindowsConstants.au3>
#include "GUIListViewEx.au3"
#include <Array.au3> ; Just for display in example

; Create GUI
Local $hGUI = GUICreate("My Example", 340, 160)

; Create LV
Local $sLV = "A|B|C"
Local $cLV = _GUICtrlListView_Create($hGUI, $sLV, 8, 8, 320, 100, BitOR($LVS_REPORT, $LVS_SINGLESEL))
_GUICtrlListView_SetExtendedListViewStyle($cLV, $LVS_EX_FULLROWSELECT)
_GUICtrlListView_SetColumnWidth($cLV, 0, 100)
_GUICtrlListView_SetColumnWidth($cLV, 1, 100)
_GUICtrlListView_SetColumnWidth($cLV, 2, 100)

; Create Button
Local $idButton = GUICtrlCreateButton("A1", 130, 115, 80, 40)

; Fill LV
Local $aLV[3][3] = [["A1","B1","C1"],["A2","B2","C2"],["A3","B3","C3"]]
_GUICtrlListView_AddArray($cLV, $aLV)
_GUIListViewEx_Init($cLV, $aLV, 0, 0, False, 64+128+256+512+1024)
            ; + 64    - No external drag
            ; + 128   - No external drop
            ; + 256   - No delete on external drag/drop
            ; + 512   - No internal drag/drop
            ; + 1024  - Single cell highlight (forces single row selection)

_GUIListViewEx_MsgRegister() ; Register GUIListViewEx
GUISetState(@SW_SHOW, $hGUI)

;=== Gui loop
While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            ExitLoop

        Case $idButton
            Switch GUICtrlRead($idButton)
                Case "A1"
                    _GUIListViewEx_SelectItem(0, 0) ; Select cell "A1"
                    GUICtrlSetData($idButton, "C3") ; next command
                Case "C3"
                    ; Unfortunately, this selects cell "C3" ADDITIONALLY to "A1"
                    ; Because of a bug in Func _GUIListViewEx_SelectItem() ???
                    _GUIListViewEx_SelectItem(2, 2) ; Select cell "C3"
                    GUICtrlSetData($idButton, "Clear") ; next command
                Case "Clear"
                    ; Remove all current highlighting
                    ; This is an instruction out of Func _GUIListViewEx_SelectItem()
                    ; According to AutoIt Help it wont work:
                    ; "If the listview is using the control style $LVS_SINGLESEL,
                    ;  setting $iIndex to -1 will not select all of the items."
                    _GUICtrlListView_SetItemSelected($cLV, -1, False)
                    GUICtrlSetData($idButton, "Exit") ; next command
                Case "Exit"
                    ExitLoop
            EndSwitch ; button
    EndSwitch ; GUIGetMsg

    ;$vRet = _GUIListViewEx_EventMonitor()
WEnd ; Gui loop

; Exit
GUIDelete($hGUI)
Exit

Melba23 · April 22, 2022

PowerJack,

I see the problem - looking into it.

M23

Melba23 · April 23, 2022

PowerJack,

The problem was caused because when "single cell" is used the ListView is owner-drawn and the UDF was relying on a stored column value to set the highlight when redrawing the content which was being altered by other sections of this perhaps overly complex script. I have rewritten the "_SelectItem" and "_HighLight" functions and the "_WM_NOTIFY" handler to use another stored value and your script now responds correctly.

I am still looking into how I might clear all selections, but that I see as a lesser problem.

Have a play and see if this new version of the UDF works to your satisfaction - and if I have broken anything else, which is not uncommon! And comments from any other readers are always welcome too.

M23

Edited April 24, 2022 by Melba23
Beta code removed

PowerJack · April 24, 2022

@Melba23,

Problem of unwanted multiple selections solved.
Thank your for your fast response and fix.

I am still looking for a proper solution to remove any selection in the ListView (the idea of the "Clear" command in my example).
My not very elegant solution would be to remove the complete ListView and create it new.

Melba23 · April 24, 2022

PowerJack,

Try this version. I have amended the _SelectItem function to allow for a total clearance when the $iRow parameter is set to -1:

So your script would read:

Case "Clear"
    _GUIListViewEx_SelectItem(-1) ; Unselect all cells
    GUICtrlSetData($idButton, "Exit") ; next command

I have written the function to deal with all possible cases:

Standard MultiSel
Standard SingleSel
Forced SingleSel with single cell selection

Have fun trying to break it!

M23

Edited April 25, 2022 by Melba23
Beta code removed

PowerJack · April 25, 2022

Thank you for the update @Melba23.

The -1 in the _SelectItem function is really helpful.

Now to your challenge ("Try to break it!")... 😉

Top 1: _GUIListViewEx_GetLastSelItem()
This function is totally ignorant regarding your latest changes.
You can verify this by running my new example below, press the move button several times and have a look at the status line at the bottom.
If you click into the cell directly then the function _GetLastSelItem() delivers the right result.

Top 2: Still getting multiple selections in some cases
This is a strange one and I think it has something to do with my "Reload" scenario.
Please try to reproduce it by...

Run my example (cell A1 is selected).
Click into the C3 cell and then press the Reload button.
Sometimes it happens at the first time, sometime I have to click C3+Reload several times
The problem is that at one point in time I end up having A1 and C3 selected.

#include <GuiConstantsEx.au3>
#include <WindowsConstants.au3>
#include "GUIListViewEx_Mod.au3"

; Create GUI
Local $hGUI = GUICreate("My Example", 340, 190)

; Create LV
Local $sLV = "A|B|C"
Local $cLV = _GUICtrlListView_Create($hGUI, $sLV, 8, 8, 320, 100, BitOR($LVS_REPORT, $LVS_SINGLESEL))
_GUICtrlListView_SetExtendedListViewStyle($cLV, $LVS_EX_FULLROWSELECT)
_GUICtrlListView_SetColumnWidth($cLV, 0, 100)
_GUICtrlListView_SetColumnWidth($cLV, 1, 100)
_GUICtrlListView_SetColumnWidth($cLV, 2, 100)

; Create Buttons
Local $idButMove    = GUICtrlCreateButton("Move", 30, 115, 80, 40)
Local $idButClear   = GUICtrlCreateButton("Clear", 120, 115, 80, 40)
Local $idButReload  = GUICtrlCreateButton("Reload", 210, 115, 80, 40)
Local $idLabel      = GUICtrlCreateLabel("Selection: ", 8, 165, 180, 20)

; Fill LV
Local $aLV[3][3] = [["A1","B1","C1"],["A2","B2","C2"],["A3","B3","C3"]]
_GUICtrlListView_AddArray($cLV, $aLV)
_GUIListViewEx_Init($cLV, $aLV, 0, 0, False, 64+128+256+512+1024)
            ; + 64    - No external drag
            ; + 128   - No external drop
            ; + 256   - No delete on external drag/drop
            ; + 512   - No internal drag/drop
            ; + 1024  - Single cell highlight (forces single row selection)

_GUIListViewEx_MsgRegister() ; Register GUIListViewEx
GUISetState(@SW_SHOW, $hGUI)

; Select first cell
Local $iRow=0, $iCol=0
_GUIListViewEx_SelectItem($iRow, $iCol)


;=== Gui loop
While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            ExitLoop

        Case $idButMove ; select next cell
            $iCol = Mod($iCol+1,3)
            If $iCol=0 Then $iRow = Mod($iRow+1,3)
            _GUIListViewEx_SelectItem($iRow, $iCol) ; Select cell

        Case $idButClear
             _GUIListViewEx_SelectItem(-1) ; Unselect all cells
             $iRow = 0
             $iCol = 0

        Case $idButReload ; reload LV
            _GUICtrlListView_DeleteAllItems($cLV)
            _GUIListViewEx_Close()
            _GUICtrlListView_AddArray($cLV, $aLV)
            _GUIListViewEx_Init($cLV, $aLV, 0, 0, False, 64+128+256+512+1024)
            $iRow = 0
            $iCol = 0
            _GUIListViewEx_SelectItem($iRow, $iCol) ; Select first cell

    EndSwitch ; GUIGetMsg

    GUICtrlSetData($idLabel, "Selected: " & _GUIListViewEx_GetLastSelItem())
            ; ==> Delimited string ListViewIndex|Row|Col

    ;$vRet = _GUIListViewEx_EventMonitor()
WEnd ; Gui loop

GUIDelete($hGUI)
Exit

Melba23 · April 25, 2022

PowerJack,

Second one was easy - the first took a bit of detective work. But I think I have solved both of the problems you found:

Over to you again!

M23

Edited May 21, 2022 by Melba23
Beta code removed

PowerJack · April 25, 2022

@Melba23,

works like a charm. Thank your for your help.
I might come back as my current Au3 project grows.

Btw, have you ever thought about a _GUICtrlListView_FindText() equivalent in Ex that can return row as well as column, similar to _GUIListViewEx_GetLastSelItem()?
I have done this as a user function but it is certainly not so elegant like your stuff.

Melba23 · April 25, 2022

PowerJack,

Glad I could help.

Quote

_GUICtrlListView_FindText() equivalent

I would use _GUIListViewEx_ReturnArray to get the ListView content into an array which can be searched easily.

M23

Melba23 · May 21, 2022

[NEW VERSION] - 21 May 22

Fixed: The _SelectItem function was not correctly clearing earlier selections when SingleSel style was used. And the selection made using the function was not reflected in the _GetLastSelItem function.

New UDF in the first post.

M23

Champak · June 9, 2022

I'm unable to get the header color to work in my script. I tried your example 6 and that is not working either. I uncommented the set header color part in your example and commented out the default header right below it.

I found this example in this thread and it works, so I don't know what's going on with the example you have or my script.

#include <GUIConstantsEx.au3>
#include <MsgBoxConstants.au3>

#include "GUIListViewEx.au3"

Global $GUI_Listview[1][2], $iModulID = 0

$hGUI = GUICreate("Test", 800, 500)

$cMove = GUICtrlCreateButton("Move", 10, 450, 80, 30)

;Listview
$GUI_Listview[$iModulID][0] = GUICtrlCreateListView("", 900, 0, 780, 90) ;,$LVS_SORTDESCENDING)

;Fügt der Listview Spaltennamen hinzu
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "EndSZ A", 100)
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "Port A", 50)
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "LSZ", 35)
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "OrdnNR", 60)
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "Port B", 50)
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "EndSZ B", 100)
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "Betrieb", 60)
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "Status", 50)
_GUICtrlListView_AddColumn($GUI_Listview[$iModulID][0], "Pegel", 70)

;Test Data
For $i = 1 To 2
    Local $sData = "Item: "&$i&"|1|2|3|4|5|6|7|8"
    GUICtrlCreateListViewItem($sData, $GUI_Listview[$iModulID][0])
Next
Local $aLV = _GUIListViewEx_ReadToArray($GUI_Listview[$iModulID][0], 0)

; ListView UDF >> Initiate ListView
$GUI_Listview[$iModulID][1] = _GUIListViewEx_Init($GUI_Listview[$iModulID][0], $aLV, 0, 0, False, 16 + 32 + 64 + 128)

; ListView UDF >> If colours used then this function must be run BEFORE GUISetState
_GUIListViewEx_MsgRegister()

; Set required colours for ListView elements - (Normal text, Normal field, Selected text, Selected field)
;Local $aSelCol[4] = [$GUIBKCOLOR_FONT_TEXT, $GUIBKCOLOR_MAIN_SECOND, $GUIBKCOLOR_MAIN_SECOND, $GUIBKCOLOR_FONT_TEXT]
Local $aSelCol[4] = ["0x999b9d", "0x303443", "0x303443", "0x999b9d"]
_GUIListViewEx_SetDefColours($GUI_Listview[$iModulID][1], $aSelCol)


; Set header data
;Local $sHeaderColor = $GUIBKCOLOR_FONT_TEXT&";"&$GUIBKCOLOR_MAIN_SECOND
Local $sHeaderColor = "0xFF0000;0x00FF00"
Local $aHdrData[][] = [["Tom", "Dick", "Harry", "Fred", "Fred", "Fred", "Fred", "Fred", "Fred"], _              ; As colour is enabled, these will replace original titles
                            [$sHeaderColor, $sHeaderColor, $sHeaderColor, $sHeaderColor, $sHeaderColor, $sHeaderColor, $sHeaderColor, $sHeaderColor, $sHeaderColor], _
                            ["", "", "", "", "", "", "", "", ""], _
                            [0,0,0,0,0,0,0,0,0]]
Local $sTest = _GUIListViewEx_LoadHdrData($GUI_Listview[$iModulID][1], $aHdrData)


GUISetState()

While 1

    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
        Case $cMove
            GUICtrlSetPos($GUI_Listview[$iModulID][0], 10, 10)
    EndSwitch

WEnd

Melba23 · June 9, 2022

Champak,

The Example 6 script is not colouring headers because for some reason the required value (+ 16 - User coloured header) has not been set in the _Init function call. Set it to read like this:

$iLVIndex_1 = _GUIListViewEx_Init($cLV_1, $aLVArray_1, 0, 0, True, 1 + 8 + 32 + 16)

and the headers work as expected.

M23

Champak · June 9, 2022

Thanks, got it working, but it's failing later.

Basically I previously saved a list I was working on, and now that I adjusted the code to color the headers I can't load the saved list. It is failing at

_WinAPI_RedrawWindow($aGLVEx_Data[$iLV_Index][0]) under the function __GUIListViewEx_RedrawWindow.

No error or exiting, everything just stops working, I've waited 10 minutes.

Also, is there a way to not make the header fonts bold when they are colored?

Edited June 9, 2022 by Champak

Melba23 · June 10, 2022

Champak,

Was the saved ListView initialised with the same parameters as the one into you you are trying to reload the data? If not, then I doubt very much if it will work. Can you let me have a copy of the saved data and the creation and initialisation lines of your ListViews - I will try and see what might be the problem.

As to the header font - look at line #3686 in the UDF where the header font is set to 600 ($FW_SEMIBOLD). Change that value of you wish - although there must have been some reason I went for that particular setting when I wrote that section.

M23

Champak · June 12, 2022

I sent it. Thanks.

Champak · June 15, 2022

Another issue, when a saved list is loaded (same initialization), if the header is colored, you can't resize the columns by dragging the header.

Edited June 15, 2022 by Champak

Champak · June 21, 2022

I'm having a problem with WM_NOTIFY. I've set _GUIListViewEx_MsgRegister(False) and put _GUIListViewEx_WM_NOTIFY_Handler($hWnd, $iMsg, $wParam, $lParam) in my WM_NOTIFY and nothing that works on notification will work. No errors, the functions just don't work. I stripped the notify down to the bare minimum just to pass it through to listnotify to see if I'm getting anything and still no colors. Once I change the listRegister to default true and comment out the wm_notify all the colors kick in. Am I calling it incorrectly? I tried putting the call both at the beginning and the end of the functions in my wm_notify and still nothing.

GUIRegisterMsg($WM_NOTIFY, 'WM_NOTIFY')

_GUIListViewEx_MsgRegister(False)

Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam)

   _GUIListViewEx_WM_NOTIFY_Handler($hWnd, $iMsg, $wParam, $lParam)

#cs
    $test = _GUIListViewEx_WM_NOTIFY_Handler($hWnd, $iMsg, $wParam, $lParam)
    Return $test
#ce

#cs
    _GUIListViewEx_WM_NOTIFY_Handler($hWnd, $iMsg, $wParam, $lParam)
    Return $GUI_RUNDEFMSG
#ce

EndFunc   ;==>WM_NOTIFY

Melba23 · June 21, 2022

Champak,

From the Guide included with the UDF:

Quote

Note that the UDF handler should be called as the final action of the existing handler and the return value should be that returned from the UDF handler - this is particularly important when any colour functionality is used.

So if you change the line to read:

Return _GUIListViewEx_WM_NOTIFY_Handler($hWnd, $iMsg, $wParam, $lParam)

you should get the colours.

M23

Sign In

GUIListViewEx - New Version 11Dec 24

Recommended Posts

Champak

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Melba23

LarsJ

pixelsearch

Posted Images

Melba23

PowerJack

Melba23

Melba23

PowerJack

Melba23

PowerJack

Melba23

PowerJack

Melba23

Melba23

Champak

Melba23

Champak

Melba23

Champak

Champak

Champak

Melba23

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members

Browse

AutoIt Resources

Release

Beta