Cannot use _GUICtrlEdit_SetText for 3-4 inputs..

[Cyborg5000]

Cannot use _GUICtrlEdit_SetText for 3-4 inputs..

[MikahS]

Post your code, how would we even be able to help you with this without any idea of what you're doing? 

[Cyborg5000]

#Region ### START Koda GUI section ### Form=c:\users\slingaya\desktop\system.kxf
$System = GUICreate("BIOS", 652, 222, 194, 129, BitOR($GUI_SS_DEFAULT_GUI,$WS_MINIMIZE))
$Sysname = GUICtrlCreateLabel("System Name", 16, 8, 100, 20, -1, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$Sysbiosver = GUICtrlCreateLabel("System BIOS Version", 16, 104, 151, 20, -1, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$biosreldt = GUICtrlCreateLabel("BIOS Release Date", 16, 72, 139, 20, -1, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$model = GUICtrlCreateLabel("System Model", 16, 40, 102, 20, -1, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$dellavlbi = GUICtrlCreateLabel("Available Dell Bios Version", 16, 136, 194, 20, -1, BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$Checkbox1 = GUICtrlCreateCheckbox("Download", 488, 136, 105, 33, $BS_CHECKBOX)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$Button1 = GUICtrlCreateButton("Download and FLASH", 488, 168, 145, 41, $BS_DEFPUSHBUTTON)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
$Progress1 = GUICtrlCreateProgress(272, 176, 172, 25, BitOR($PBS_SMOOTH,$WS_BORDER), BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
$Button2 = GUICtrlCreateButton("Check BIOS Status", 488, 8, 145, 33, $BS_DEFPUSHBUTTON)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
$sysmodel = GUICtrlCreateInput("", 272, 40, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER), BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
$Biorlsdt = GUICtrlCreateInput("", 272, 72, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER), BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
$sysbiover = GUICtrlCreateInput("", 272, 104, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER), BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
$Avdlbiovr = GUICtrlCreateInput("", 272, 136, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER), BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
$sysnamd = GUICtrlCreateInput("", 272, 8, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT,$ES_CENTER), BitOR($WS_EX_CLIENTEDGE,$WS_EX_STATICEDGE))
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###

$compname = @ComputerName
$sysmod = RegRead ("HKLM64\HARDWARE\DESCRIPTION\System\BIOS", "SystemProductName")
$biorldt = RegRead ("HKLM64\HARDWARE\DESCRIPTION\System\BIOS", "BIOSReleaseDate")

 

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit

        Case $System
        Case $System
        Case $System
        Case $System
        Case $Sysname
        Case $Sysbiosver
        Case $biosreldt
        Case $model
        Case $dellavlbi
        Case $Checkbox1
        Case $Button1
        Case $Button2
        Case $System  = $sysmodel
            _GUICtrlEdit_SetText ($sysmodel, $sysmod)
        Case $Biorlsdt
        Case $sysbiover
        Case $Avdlbiovr
        Case $sysnamd = $System
_GUICtrlEdit_SetText ($sysnamd, $compname)

[MikahS]

If you may, please edit to put your code in the code box using the <> on the toolbar next to the smiley. 

Also, that is not even working code. 

You have 4 case statements for $system as well, why is that?

[Cyborg5000]

If you may, please edit to put your code in the code box using the <> on the toolbar next to the smiley. 

Also, that is not even working code. 

You have 4 case statements for $system as well, why is that?

Was trying different things to make it work. However if i dont put the form + the data where i need to auto put, i cant get _GUICtrlEdit_SetText to work...

Case $System  = $sysmodel
            _GUICtrlEdit_SetText ($sysmodel, $sysmod)
        Case $Biorlsdt
        Case $sysbiover
        Case $Avdlbiovr
        Case $sysnamd = $System
_GUICtrlEdit_SetText ($sysnamd, $compname)

 

these 5 things are not working or setting data when using _GUICtrlEdit_SetText

[MikahS]

A while loop is an event loop. Meaning that it is looking for events on the GUI. If you're trying to autofill these values before there has been an event on the GUI, then you need to fill them before going into the loop, like so:

expandcollapse popup

#include <GUIConstants.au3>
#include <GUIEdit.au3>

#Region ### START Koda GUI section ### Form=c:\users\slingaya\desktop\system.kxf
Local $System = GUICreate("BIOS", 652, 222, 194, 129, BitOR($GUI_SS_DEFAULT_GUI, $WS_MINIMIZE))
Local $Sysname = GUICtrlCreateLabel("System Name", 16, 8, 100, 20, -1, BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
Local $Sysbiosver = GUICtrlCreateLabel("System BIOS Version", 16, 104, 151, 20, -1, BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
Local $biosreldt = GUICtrlCreateLabel("BIOS Release Date", 16, 72, 139, 20, -1, BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
Local $model = GUICtrlCreateLabel("System Model", 16, 40, 102, 20, -1, BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
Local $dellavlbi = GUICtrlCreateLabel("Available Dell Bios Version", 16, 136, 194, 20, -1, BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
Local $Checkbox1 = GUICtrlCreateCheckbox("Download", 488, 136, 105, 33, $BS_CHECKBOX)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
Local $Button1 = GUICtrlCreateButton("Download and FLASH", 488, 168, 145, 41, $BS_DEFPUSHBUTTON)
GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
Local $Progress1 = GUICtrlCreateProgress(272, 176, 172, 25, BitOR($PBS_SMOOTH, $WS_BORDER), BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
Local $Button2 = GUICtrlCreateButton("Check BIOS Status", 488, 8, 145, 33, $BS_DEFPUSHBUTTON)
GUICtrlSetFont(-1, 10, 800, 0, "MS Sans Serif")
Local $sysmodel = GUICtrlCreateInput("", 272, 40, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER), BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
Local $Biorlsdt = GUICtrlCreateInput("", 272, 72, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER), BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
Local $sysbiover = GUICtrlCreateInput("", 272, 104, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER), BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
Local $Avdlbiovr = GUICtrlCreateInput("", 272, 136, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER), BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
Local $sysnamd = GUICtrlCreateInput("", 272, 8, 177, 21, BitOR($GUI_SS_DEFAULT_INPUT, $ES_CENTER), BitOR($WS_EX_CLIENTEDGE, $WS_EX_STATICEDGE))
GUISetState(@SW_SHOW)
#EndRegion ### END Koda GUI section ###


Local $compname = @ComputerName
Local $sysmod = RegRead("HKLM64\HARDWARE\DESCRIPTION\System\BIOS", "SystemProductName")
Local $biorldt = RegRead("HKLM64\HARDWARE\DESCRIPTION\System\BIOS", "BIOSReleaseDate")

_GUICtrlEdit_SetText($sysmodel, $sysmod)
_GUICtrlEdit_SetText($sysnamd, $compname)
_GUICtrlEdit_SetText($Biorlsdt, $biorldt)

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            Exit
        Case $Sysname
        Case $Sysbiosver
        Case $biosreldt
        Case $model
        Case $dellavlbi
        Case $Checkbox1
        Case $Button1
        Case $Button2
        Case $sysmodel
            _GUICtrlEdit_SetText($sysmodel, $sysmod)
        Case $Biorlsdt
        Case $sysbiover
        Case $Avdlbiovr
        Case $sysnamd
            _GUICtrlEdit_SetText($sysnamd, $compname)
    EndSwitch
WEnd

 

[Cyborg5000]