Jump to content

Button not working when clicked again.

31290

By 31290,
in AutoIt General Help and Support

 Share
Go to solution Solved by argumentum,

Recommended Posts

31290 Adventurer

31290

Posted
Posted

Hi everyone,

Hope you're fine today :)

I'm facing a little issue. I'm sure this might be nothing for you but I can't figure it out by myself. 

Here's the code (not written by me, credits to supdw2k for this huge help ^^):

#include <Array.au3>
#include <ButtonConstants.au3>
#include <ColorConstants.au3>
#include <ComboConstants.au3>
#Include <Constants.au3>
#include <Crypt.au3>
#include <Date.au3>
#include <File.au3>
#Include <FontConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiEdit.au3>
#include <GuiListView.au3>
#include <Misc.au3>
#include <MsgBoxConstants.au3>
#include <ProgressConstants.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <GuiButton.au3>


Global $Images = "C:\Windows\ATL_Laptop\Resources\Images\"
Opt("GUIOnEventMode", 1)
Global Const $sINIFile = "test.ini"
Global $aCheckboxes

ManualActions()

Func ManualActions()
    Global $ManualActionsGui = GuiCreate("Automated Task List Suite", 460, 480, -1, -1)
     GUISetBkColor (0xFFFFFF)
    GUICtrlCreatePic ($Images & "\SAClogo.jpg", 110, 10, 240, 80)
    GUICtrlCreateLabel ("---MANUAL ACTIONS---" , 173, 100, 300, -1)
    GUICtrlSetFont (-1, 8.5, 700, 0)
    Local $ResetAll = GuiCtrlCreateButton ("Reset Everything",  10 , 440, 97,  30)
    Local $SaveAndQuit = GUICtrlCreateButton ("Save and Quit", 360, 440, 97, 30)
    Local $iX = 10, $iY = 120

    $aCheckboxes = _ReadINI()
    For $x = 0 To UBound($aCheckboxes) - 1
        Local $idCheckBox = _CreateCheckbox($aCheckboxes[$x][0], $iX, $iY)
        If _Crypt_HashData($aCheckboxes[$x][0] & "|" & $sINIFile & "|" & $GUI_CHECKED, $CALG_MD5) = $aCheckboxes[$x][1] Then
            GUICtrlSetState(-1, BitOR($GUI_CHECKED, $GUI_DISABLE))
        EndIf
        $aCheckboxes[$x][0] = $idCheckBox
        $iY += 20
    Next

        GUISetOnEvent ($GUI_EVENT_CLOSE, "_Exit", $ManualActionsGui)
    GUICtrlSetOnEvent ($ResetAll, "_ResetAll")
        GUICtrlSetOnEvent ($SaveAndQuit , "_Exit")
    GUISetState()

    While 1
Sleep(10)
 WEnd
EndFunc   ;==>GenGUI

Func _ResetAll()
GUIDelete ($ManualActionsGui)
FileDelete ($sINIFile)
ManualActions()
EndFunc

Func _Checked()
    If GUICtrlRead(@GUI_CtrlId) = 1 Then GUICtrlSetState(@GUI_CtrlId, $GUI_DISABLE)
EndFunc   ;==>_Checked

Func _CreateCheckbox($sLabel, $iX, $iY)
    Local $idCheckBox = GUICtrlCreateCheckbox($sLabel, $iX, $iY, -1, -1)
    GUICtrlSetOnEvent(-1, "_Checked")

    Return $idCheckBox
EndFunc   ;==>_CreateCheckbox

Func _Exit()
    _WriteINI()
    Exit
EndFunc   ;==>_Exit

Func _GenINIFile()
 Local $aCheckboxes[14] = ["Put a label with hostname on the computer?", "Check if AHCI is set in the BIOS", "Add all applications in AD?", "Check the installed drivers?", "Customize all desktop icons?", _
   "Restore User's data?", "Connect to the VPN once?", "Update Firefox and Google Chrome ?", "Restore user's Bookmarks?", "Deploy CrashPlanPro, remove new licence and send a mail to the Service Desk?", _
   "Check if printers the User needs are present?", "Copy SAPlogin.ini from former Computer (if needed)?", "Encrypt the Disk with PGP?", "Update Remedy database?"]
    FileClose(FileOpen($sINIFile, 2))
    For $x = 0 To UBound($aCheckboxes) - 1
        IniWrite($sINIFile, "Checkbox_Labels", $x, $aCheckboxes[$x])
        IniWrite($sINIFile, "Checkbox_States", $x, "")
    Next
EndFunc   ;==>_GenINIFile

Func _ReadINI()
    If Not FileExists($sINIFile) Then _GenINIFile()
    Local $aCheckbox_Labels = IniReadSection($sINIFile, "Checkbox_Labels")
    If @error Then Return SetError(1, 0, 0) ;If INIReadSection Failed Set Error = 1
    Local $aCheckbox_States = IniReadSection($sINIFile, "Checkbox_States")
    If @error Then Return SetError(2, 0, 0) ;If INIReadSection Failed Set Error = 2

    Local $aCheckboxes[$aCheckbox_Labels[0][0]][2]
    For $x = 0 To ($aCheckbox_Labels[0][0] - 1)
        $aCheckboxes[$x][0] = $aCheckbox_Labels[$x + 1][1]
        $aCheckboxes[$x][1] = $aCheckbox_States[$x + 1][1]
    Next

    Return $aCheckboxes
EndFunc   ;==>_ReadINI

Func _WriteINI()
    For $x = 0 To UBound($aCheckboxes) - 1
        IniWrite($sINIFile, "Checkbox_Labels", $x, GUICtrlRead($aCheckboxes[$x][0], 1))
        IniWrite($sINIFile, "Checkbox_States", $x, _Crypt_HashData(GUICtrlRead($aCheckboxes[$x][0], 1) & "|" & $sINIFile & "|" & GUICtrlRead($aCheckboxes[$x][0]), $CALG_MD5))
    Next
EndFunc   ;==>_WriteINI
 
 

When ran the first time, my buttons are working. But as soon as the Gui is recreated, thzy are not working anymore. 

I think the came from the _ResetAll function but for me, this should work.

I don't know what I'm missing there and I hope you can give me a hand on this  :sweating:

Thanks in advance :)

~~~ Doom Shall Never Die, Only The Players ~~~

Link to comment
Share on other sites
  • Solution
argumentum Universalist

argumentum

Posted
  • Solution
Posted (edited)

I don't know what I'm missing there and I hope you can give me a hand on this  :sweating:

Thanks in advance :)

there you go:

#include <Array.au3>
#include <ButtonConstants.au3>
#include <ColorConstants.au3>
#include <ComboConstants.au3>
#include <Constants.au3>
#include <Crypt.au3>
#include <Date.au3>
#include <File.au3>
#include <FontConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiEdit.au3>
#include <GuiListView.au3>
#include <Misc.au3>
#include <MsgBoxConstants.au3>
#include <ProgressConstants.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <GuiButton.au3>


Global $Images = "C:\Windows\ATL_Laptop\Resources\Images\"
Opt("GUIOnEventMode", 1)
Global Const $sINIFile = "test.ini"
Global $aCheckboxes
Global $iRunning = 1
ManualActions()

Func ManualActions()
    Global $ManualActionsGui = GUICreate("Automated Task List Suite", 460, 480, -1, -1)
    GUISetBkColor(0xFFFFFF)
    GUICtrlCreatePic($Images & "\SAClogo.jpg", 110, 10, 240, 80)
    GUICtrlCreateLabel("---MANUAL ACTIONS---", 173, 100, 300, -1)
    GUICtrlSetFont(-1, 8.5, 700, 0)
    Local $ResetAll = GUICtrlCreateButton("Reset Everything", 10, 440, 97, 30)
    Local $SaveAndQuit = GUICtrlCreateButton("Save and Quit", 360, 440, 97, 30)
    Local $iX = 10, $iY = 120

    $aCheckboxes = _ReadINI()
    For $x = 0 To UBound($aCheckboxes) - 1
        Local $idCheckBox = _CreateCheckbox($aCheckboxes[$x][0], $iX, $iY)
        If _Crypt_HashData($aCheckboxes[$x][0] & "|" & $sINIFile & "|" & $GUI_CHECKED, $CALG_MD5) = $aCheckboxes[$x][1] Then
            GUICtrlSetState(-1, BitOR($GUI_CHECKED, $GUI_DISABLE))
        EndIf
        $aCheckboxes[$x][0] = $idCheckBox
        $iY += 20
    Next

    GUISetOnEvent($GUI_EVENT_CLOSE, "_Exit", $ManualActionsGui)
    GUICtrlSetOnEvent($ResetAll, "_ResetAll")
    GUICtrlSetOnEvent($SaveAndQuit, "_Exit")
    GUISetState()
    $iRunning = 1
    While $iRunning
        Sleep(10)
    WEnd
    GUIDelete($ManualActionsGui)
    FileDelete($sINIFile)
    ManualActions()
EndFunc   ;==>ManualActions

Func _ResetAll()
    $iRunning = 0
EndFunc   ;==>_ResetAll
Func _Checked()
    If GUICtrlRead(@GUI_CtrlId) = 1 Then GUICtrlSetState(@GUI_CtrlId, $GUI_DISABLE)
EndFunc   ;==>_Checked

Func _CreateCheckbox($sLabel, $iX, $iY)
    Local $idCheckBox = GUICtrlCreateCheckbox($sLabel, $iX, $iY, -1, -1)
    GUICtrlSetOnEvent(-1, "_Checked")

    Return $idCheckBox
EndFunc   ;==>_CreateCheckbox

Func _Exit()
    _WriteINI()
    Exit
EndFunc   ;==>_Exit

Func _GenINIFile()
    Local $aCheckboxes[14] = ["Put a label with hostname on the computer?", "Check if AHCI is set in the BIOS", "Add all applications in AD?", "Check the installed drivers?", "Customize all desktop icons?", _
            "Restore User's data?", "Connect to the VPN once?", "Update Firefox and Google Chrome ?", "Restore user's Bookmarks?", "Deploy CrashPlanPro, remove new licence and send a mail to the Service Desk?", _
            "Check if printers the User needs are present?", "Copy SAPlogin.ini from former Computer (if needed)?", "Encrypt the Disk with PGP?", "Update Remedy database?"]
    FileClose(FileOpen($sINIFile, 2))
    For $x = 0 To UBound($aCheckboxes) - 1
        IniWrite($sINIFile, "Checkbox_Labels", $x, $aCheckboxes[$x])
        IniWrite($sINIFile, "Checkbox_States", $x, "")
    Next
EndFunc   ;==>_GenINIFile

Func _ReadINI()
    If Not FileExists($sINIFile) Then _GenINIFile()
    Local $aCheckbox_Labels = IniReadSection($sINIFile, "Checkbox_Labels")
    If @error Then Return SetError(1, 0, 0) ;If INIReadSection Failed Set Error = 1
    Local $aCheckbox_States = IniReadSection($sINIFile, "Checkbox_States")
    If @error Then Return SetError(2, 0, 0) ;If INIReadSection Failed Set Error = 2

    Local $aCheckboxes[$aCheckbox_Labels[0][0]][2]
    For $x = 0 To ($aCheckbox_Labels[0][0] - 1)
        $aCheckboxes[$x][0] = $aCheckbox_Labels[$x + 1][1]
        $aCheckboxes[$x][1] = $aCheckbox_States[$x + 1][1]
    Next

    Return $aCheckboxes
EndFunc   ;==>_ReadINI

Func _WriteINI()
    For $x = 0 To UBound($aCheckboxes) - 1
        IniWrite($sINIFile, "Checkbox_Labels", $x, GUICtrlRead($aCheckboxes[$x][0], 1))
        IniWrite($sINIFile, "Checkbox_States", $x, _Crypt_HashData(GUICtrlRead($aCheckboxes[$x][0], 1) & "|" & $sINIFile & "|" & GUICtrlRead($aCheckboxes[$x][0]), $CALG_MD5))
    Next
EndFunc   ;==>_WriteINI

.. I just fix the loop problem, the rest of the code I did not tweak/correct

Edited by argumentum

Follow the link to my code contribution ( and other things too ).
FAQ - Please Read Before Posting.
autoit_scripter_blue_userbar.png

Link to comment
Share on other sites
BrewManNH Universalist

BrewManNH

Posted
Posted

Here's a better way, without the recursion of the previous script.

#include <Array.au3>
#include <ButtonConstants.au3>
#include <ColorConstants.au3>
#include <ComboConstants.au3>
#include <Constants.au3>
#include <Crypt.au3>
#include <Date.au3>
#include <File.au3>
#include <FontConstants.au3>
#include <GUIConstantsEx.au3>
#include <GuiEdit.au3>
#include <GuiListView.au3>
#include <Misc.au3>
#include <MsgBoxConstants.au3>
#include <ProgressConstants.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <GuiButton.au3>


Global $Images = "C:\Windows\ATL_Laptop\Resources\Images\"
Opt("GUIOnEventMode", 1)
Global Const $sINIFile = "test.ini"
Global $aCheckboxes, $bReset = False
ManualActions()
While 1
    If $bReset Then
        $bReset = False
        ManualActions()
    EndIf
WEnd
Func ManualActions()
    Global $ManualActionsGui = GUICreate("Automated Task List Suite", 460, 480, -1, -1)
    GUISetBkColor(0xFFFFFF)
    GUICtrlCreatePic($Images & "\SAClogo.jpg", 110, 10, 240, 80)
    GUICtrlCreateLabel("---MANUAL ACTIONS---", 173, 100, 300, -1)
    GUICtrlSetFont(-1, 8.5, 700, 0)
    Local $ResetAll = GUICtrlCreateButton("Reset Everything", 10, 440, 97, 30)
    Local $SaveAndQuit = GUICtrlCreateButton("Save and Quit", 360, 440, 97, 30)
    Local $iX = 10, $iY = 120

    $aCheckboxes = _ReadINI()
    For $x = 0 To UBound($aCheckboxes) - 1
        Local $idCheckBox = _CreateCheckbox($aCheckboxes[$x][0], $iX, $iY)
        If _Crypt_HashData($aCheckboxes[$x][0] & "|" & $sINIFile & "|" & $GUI_CHECKED, $CALG_MD5) = $aCheckboxes[$x][1] Then
            GUICtrlSetState(-1, BitOR($GUI_CHECKED, $GUI_DISABLE))
        EndIf
        $aCheckboxes[$x][0] = $idCheckBox
        $iY += 20
    Next

    GUISetOnEvent($GUI_EVENT_CLOSE, "_Exit", $ManualActionsGui)
    GUICtrlSetOnEvent($ResetAll, "_ResetAll")
    GUICtrlSetOnEvent($SaveAndQuit, "_Exit")
    GUISetState()

    While Not $bReset
        Sleep(10)
    WEnd
EndFunc   ;==>ManualActions

Func _ResetAll()
    GUIDelete($ManualActionsGui)
    FileDelete($sINIFile)
;~  ManualActions()
    $bReset = True
EndFunc   ;==>_ResetAll

Func _Checked()
    If GUICtrlRead(@GUI_CtrlId) = 1 Then GUICtrlSetState(@GUI_CtrlId, $GUI_DISABLE)
EndFunc   ;==>_Checked

Func _CreateCheckbox($sLabel, $iX, $iY)
    Local $idCheckBox = GUICtrlCreateCheckbox($sLabel, $iX, $iY, -1, -1)
    GUICtrlSetOnEvent(-1, "_Checked")

    Return $idCheckBox
EndFunc   ;==>_CreateCheckbox

Func _Exit()
    _WriteINI()
    Exit
EndFunc   ;==>_Exit

Func _GenINIFile()
    Local $aCheckboxes[14] = ["Put a label with hostname on the computer?", "Check if AHCI is set in the BIOS", "Add all applications in AD?", "Check the installed drivers?", "Customize all desktop icons?", _
            "Restore User's data?", "Connect to the VPN once?", "Update Firefox and Google Chrome ?", "Restore user's Bookmarks?", "Deploy CrashPlanPro, remove new licence and send a mail to the Service Desk?", _
            "Check if printers the User needs are present?", "Copy SAPlogin.ini from former Computer (if needed)?", "Encrypt the Disk with PGP?", "Update Remedy database?"]
    FileClose(FileOpen($sINIFile, 2))
    For $x = 0 To UBound($aCheckboxes) - 1
        IniWrite($sINIFile, "Checkbox_Labels", $x, $aCheckboxes[$x])
        IniWrite($sINIFile, "Checkbox_States", $x, "")
    Next
EndFunc   ;==>_GenINIFile

Func _ReadINI()
    If Not FileExists($sINIFile) Then _GenINIFile()
    Local $aCheckbox_Labels = IniReadSection($sINIFile, "Checkbox_Labels")
    If @error Then Return SetError(1, 0, 0) ;If INIReadSection Failed Set Error = 1
    Local $aCheckbox_States = IniReadSection($sINIFile, "Checkbox_States")
    If @error Then Return SetError(2, 0, 0) ;If INIReadSection Failed Set Error = 2

    Local $aCheckboxes[$aCheckbox_Labels[0][0]][2]
    For $x = 0 To ($aCheckbox_Labels[0][0] - 1)
        $aCheckboxes[$x][0] = $aCheckbox_Labels[$x + 1][1]
        $aCheckboxes[$x][1] = $aCheckbox_States[$x + 1][1]
    Next

    Return $aCheckboxes
EndFunc   ;==>_ReadINI

Func _WriteINI()
    For $x = 0 To UBound($aCheckboxes) - 1
        IniWrite($sINIFile, "Checkbox_Labels", $x, GUICtrlRead($aCheckboxes[$x][0], 1))
        IniWrite($sINIFile, "Checkbox_States", $x, _Crypt_HashData(GUICtrlRead($aCheckboxes[$x][0], 1) & "|" & $sINIFile & "|" & GUICtrlRead($aCheckboxes[$x][0]), $CALG_MD5))
    Next
EndFunc   ;==>_WriteINI

If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.
Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag Gude
How to ask questions the smart way!

I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from.

Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays.  -  ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script.  -  Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label.  -  _FileGetProperty - Retrieve the properties of a file  -  SciTE Toolbar - A toolbar demo for use with the SciTE editor  -  GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI.  -   Latin Square password generator

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...