Disable buttons if checkbox not checked

[timdecker]

I would like to have the bottons only enabled if the checkboxes are checked. Below is the code I am using, the comments between the #CS and #CE is what I was trying to get to work...

expandcollapse popup

#include <file.au3>
#include <GUICONSTANTS.au3>

Global $a_csv
$s_Path = FileOpenDialog("Select CVS File", @ScriptDir, "comma seperated values (*.csv)")
If @error Then
    MsgBox(4096, "", "No File(s) chosen")
    Exit
Else
    _FileReadToArray($s_Path, $a_csv)
    GUICreate("CSV Listview", 900, 450, -1, -1)
    $listview = GUICtrlCreateListView(StringReplace($a_csv[1], ",", "|"), 10, 10, 600, 210)
    $checkboxName = StringSplit($a_csv[1], ",")
    $iCount = $checkboxName[0]

    Global $aCheck[$iCount + 1]
    Global $mapColumn[$iCount + 1]
    $nextSample = GUICtrlCreateButton("Map sample submition button ", 395, 320, 180, 30)
    $runProg = GUICtrlCreateButton("Run Program", 700, 400, 180, 30)
    $button_enabled = 1

    For $j = 1 To $iCount
        ; Store controIDs of the checkboxes
        $aCheck[$j] = GUICtrlCreateCheckbox($checkboxName[$j], 10, 190 + (50 * $j), 100, 30)
        $mapColumn[$j] = GUICtrlCreateButton("Map " & '"'  & $checkboxName[$j] & '"' & " to input box", 150, 190 + (50 * $j), 180, 30)
        GUICtrlSetState($aCheck[$j], $GUI_UNCHECKED)
        GUICtrlSetState($mapColumn[$j], $GUI_DISABLE)
    Next
#cs
While 1
                            if BitAnd(GUICtrlRead($aCheck[$j]),$GUI_UNCHECKED) = $GUI_UNCHECKED Then

                                GUICtrlSetState($mapColumn[$j], $GUI_DISABLE)
                                $button_enabled = 0

                            ElseIf $button_enabled = 0 And BitAnd(GUICtrlRead($aCheck[$j]),$GUI_UNCHECKED) = $GUI_CHECKED Then

                                    GUICtrlSetState($mapColumn[$j], $GUI_ENABLE)
                                    ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : GUICtrlSetState($mapColumn[$j], $GUI_ENABLE) = ' & GUICtrlSetState($mapColumn[$j], $GUI_ENABLE) & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console
                                    $button_enabled = 1

                            EndIf
                            wend
#ce
    GUISetState()

    For $i = 2 To UBound($a_csv) - 1
        $s_temp = StringReplace($a_csv[$i], ",", "|")
        GUICtrlCreateListViewItem($s_temp, $listview)
    Next

EndIf


While 1
    $msg = GUIGetMsg()
    Select
        Case $msg = $GUI_EVENT_CLOSE
            ExitLoop
    EndSelect
WEnd
Exit

[ahmet]

Do you want something like this below?

#include <GUIConstantsEx.au3>

Global $iNumOfCtrls=5
Global $aChkBox[$iNumOfCtrls], $aBtn[$iNumOfCtrls]

$hMain=GUICreate("test")
For $i=0 To $iNumOfCtrls-1
    $aChkBox[$i]=GUICtrlCreateCheckbox("CheckBox " & $i,10,10+$i*22,200,22)
    $aBtn[$i]=GUICtrlCreateButton("Button " & $i,10+200+40,10+$i*22,200,22)
    GUICtrlSetState(-1,$GUI_DISABLE)
Next
GUISetState()

While 1
    Switch GUIGetMsg()
        Case $GUI_EVENT_CLOSE
            Exit
    EndSwitch
    For $i=0 To $iNumOfCtrls-1
        If  BitAND(GUICtrlGetState($aBtn[$i]),$GUI_DISABLE) And BitAND(GUICtrlRead($aChkBox[$i]),$GUI_CHECKED) Then
            GUICtrlSetState($aBtn[$i],$GUI_ENABLE)
            ExitLoop
        ElseIf BitAND(GUICtrlGetState($aBtn[$i]),$GUI_ENABLE) And BitAND(GUICtrlRead($aChkBox[$i]),$GUI_UNCHECKED) Then
            GUICtrlSetState($aBtn[$i],$GUI_DISABLE)
            ExitLoop
        EndIf
    Next
WEnd

[Melba23]

timdecker,

I would do it like this:

expandcollapse popup

#include <file.au3>
#include <GUIConstantsEx.au3>

Global $a_csv[2] = [3, "Col 1,Col 2,Col 3"]
;$s_Path = FileOpenDialog("Select CVS File", @ScriptDir, "comma seperated values (*.csv)")
;If @error Then
;   MsgBox(4096, "", "No File(s) chosen")
;    Exit
;Else
    ;_FileReadToArray($s_Path, $a_csv)
    GUICreate("CSV Listview", 900, 450, -1, -1)
    $listview = GUICtrlCreateListView(StringReplace($a_csv[1], ",", "|"), 10, 10, 600, 210)
    $checkboxName = StringSplit($a_csv[1], ",")
    $iCount = $checkboxName[0]

    Global $aCheck[$iCount + 1]
    Global $mapColumn[$iCount + 1]
    $nextSample = GUICtrlCreateButton("Map sample submition button ", 395, 320, 180, 30)
    $runProg = GUICtrlCreateButton("Run Program", 700, 400, 180, 30)
    $button_enabled = 1

    For $j = 1 To $iCount
        ; Store controIDs of the checkboxes
        $aCheck[$j] = GUICtrlCreateCheckbox($checkboxName[$j], 10, 190 + (50 * $j), 100, 30)
        $mapColumn[$j] = GUICtrlCreateButton("Map " & '"'  & $checkboxName[$j] & '"' & " to input box", 150, 190 + (50 * $j), 180, 30)
        GUICtrlSetState($aCheck[$j], $GUI_UNCHECKED)
        GUICtrlSetState($mapColumn[$j], $GUI_DISABLE)
    Next

    For $i = 2 To UBound($a_csv) - 1
        $s_temp = StringReplace($a_csv[$i], ",", "|")
        GUICtrlCreateListViewItem($s_temp, $listview)
    Next

;EndIf

GUISetState()

While 1
    $msg = GUIGetMsg()
    Switch $msg
        Case $GUI_EVENT_CLOSE
            ExitLoop
        Case Else
            For $i = 1 To $iCount
                If $msg = $aCheck[$i] Then
                    If GUICtrlRead($msg) = 1 Then
                        GUICtrlSetState($mapColumn[$i], $GUI_ENABLE)
                    Else
                        GUICtrlSetState($mapColumn[$i], $GUI_DISABLE)
                    EndIf
                    ExitLoop
                EndIf
            Next
    EndSwitch
WEnd
Exit

Please ask if you have any questions.

M23

Edited March 30, 2015 by Melba23
Typo

[timdecker]

@ahmet and @Melba23, thank you both for your response. I was able to get both to work as I would like.

Is there an advantage to using one over the other?

Thanks again!

[Melba23]

timdecker,

My version only runs when a control is actioned - the other version runs through all the controls on every pass through the loop. So I would suggest that my version is better - but then you would expect me to say that anyway.

M23