JohnOne Posted February 26, 2015 Share Posted February 26, 2015 After >JohnMcloud showing me how to select individual items in a listview earlier, I've been pulling my hair out trying to get it to work in my own script for quite a while. I finally discovered the problem was occurring because the listview was on a tab item. The symptoms are: You have to click on the selection you want, and then the one above it, for the actuall selection to happen. I'd love some help on this. I've created a reproducer, below... expandcollapse popup#include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> Global $hGUI, $hListview, $aHit[2] = [-1, -1] $hGUI = GUICreate("Listview in TAB", 250, 180) GUISetBkColor(0x00E0FFFF) GUISetFont(9, 300) Local $idTab = GUICtrlCreateTab(0, 0, 250, 130) GUICtrlCreateTabItem("tab") $iListview = GUICtrlCreateListView("one|two|three", 0, 20, 350, 130, $LVS_REPORT, BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT)) $hListview = GUICtrlGetHandle($iListview) GUICtrlCreateListViewItem("0-0|0-1|0-2", $iListview) GUICtrlCreateListViewItem("1-0|1-1|1-2", $iListview) GUICtrlCreateListViewItem("2-0|2-1|2-2", $iListview) GUICtrlCreateTabItem("") $hButton = GUICtrlCreateButton("Click", 0, 155, 250, 20) GUISetState(@SW_SHOW) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") Local $idMsg While 2 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $hButton MsgBox(0, "Info", "Cell selected: " & _GUICtrlListView_GetItemText($hListview, $aHit[0], $aHit[1]) & @CR, 0, $hGUI) EndSwitch WEnd Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) #forceref $hWnd, $iMsg, $wParam Local $tNMHDR, $hWndFrom, $iCode $tNMHDR = DllStructCreate($tagNMHDR, $lParam) $hWndFrom = HWnd(DllStructGetData($tNMHDR, "hWndFrom")) $iCode = DllStructGetData($tNMHDR, "Code") Switch $hWndFrom Case $hListview Switch $iCode Case $LVN_ITEMCHANGED Local $tNMLISTVIEW, $iItem, $aInfo $tNMLISTVIEW = DllStructCreate($tagNMLISTVIEW, $lParam) $iItem = DllStructGetData($tNMLISTVIEW, "Item") _GUICtrlListView_SetItemSelected($hListview, $iItem, False) Local $aInfo = GUIGetCursorInfo($hGUI) If $aInfo[2] Then $aInfo = _GUICtrlListView_SubItemHitTest($hListview, $aInfo[0] - 2, $aInfo[1] - 2) ; Upper left = ( 2, 2 ) If $aInfo[0] > -1 And $aInfo[1] > -1 And $aInfo[0] = $iItem Then If $aHit[0] > -1 Then _GUICtrlListView_RedrawItems($hListview, $aHit[0], $aHit[0]) If $aHit[0] <> $aInfo[0] Or $aHit[1] <> $aInfo[1] Then $aHit[0] = $aInfo[0] ; Row $aHit[1] = $aInfo[1] ; Col Else $aHit[0] = -1 ; Row $aHit[1] = -1 ; Col EndIf _GUICtrlListView_RedrawItems($hListview, $iItem, $iItem) EndIf EndIf Case $NM_CUSTOMDRAW Local $tNMLVCUSTOMDRAW = DllStructCreate($tagNMLVCUSTOMDRAW, $lParam) Local $dwDrawStage = DllStructGetData($tNMLVCUSTOMDRAW, "dwDrawStage") Switch $dwDrawStage ; Holds a value that specifies the drawing stage Case $CDDS_PREPAINT ; Before the paint cycle begins Return $CDRF_NOTIFYITEMDRAW ; Notify the parent window of any ITEM-related drawing operations Case $CDDS_ITEMPREPAINT ; Before painting an item Return $CDRF_NOTIFYSUBITEMDRAW ; Notify the parent window of any SUBITEM-related drawing operations Case BitOR($CDDS_ITEMPREPAINT, $CDDS_SUBITEM) ; Before painting a subitem Local $dwItemSpec = DllStructGetData($tNMLVCUSTOMDRAW, "dwItemSpec") ; Item index Local $iSubItem = DllStructGetData($tNMLVCUSTOMDRAW, "iSubItem") ; Subitem index Local $uItemState = DllStructGetData($tNMLVCUSTOMDRAW, "uItemState") ; Item state If $dwItemSpec = $aHit[0] Then ; Marked row Switch $iSubItem Case $aHit[1] ; Marked column DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0xFFFFFF) ; Forecolor white DllStructSetData($tNMLVCUSTOMDRAW, "clrTextBk", 0xCC6600) ; Backcolor dark blue, BGR Case Else ; Other columns DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0x000000) ; Forecolor black DllStructSetData($tNMLVCUSTOMDRAW, "ClrTextBk", 0xFFFFFF) ; Backcolor white EndSwitch Else ; Other rows DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0x000000) DllStructSetData($tNMLVCUSTOMDRAW, "ClrTextBk", 0xFFFFFF) EndIf Return $CDRF_NEWFONT ; $CDRF_NEWFONT must be returned after changing font or colors EndSwitch EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY AutoIt Absolute Beginners Require a serial Pause Script Video Tutorials by Morthawt ipify Monkey's are, like, natures humans. Link to comment Share on other sites More sharing options...
mLipok Posted February 26, 2015 Share Posted February 26, 2015 I'am not sure, but maybe this: ;~ $aInfo = _GUICtrlListView_SubItemHitTest($hListview, $aInfo[0] - 2, $aInfo[1] - 2) ; Upper left = ( 2, 2 ) $aInfo = _GUICtrlListView_SubItemHitTest($hListview, -1, -1) ; Upper left = ( 2, 2 ) JohnOne 1 Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24 Link to comment Share on other sites More sharing options...
JohnOne Posted February 26, 2015 Author Share Posted February 26, 2015 Nope. AutoIt Absolute Beginners Require a serial Pause Script Video Tutorials by Morthawt ipify Monkey's are, like, natures humans. Link to comment Share on other sites More sharing options...
UEZ Posted February 26, 2015 Share Posted February 26, 2015 (edited) The problem is that you are not selecting a cell explicitly. Your code will work till you select a cell and not mark a row only -> not tab related! Try this: Switch $iCode Case $NM_CLICK $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam) $aHit[0] = $tInfo.Index $aHit[1] = $tInfo.SubItem Case $LVN_ITEMCHANGED Br, UEZ Edited February 26, 2015 by UEZ JohnOne 1 Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
JohnOne Posted February 26, 2015 Author Share Posted February 26, 2015 Oooh, close. selects the correct item, but have to click three times and others stay selected too. AutoIt Absolute Beginners Require a serial Pause Script Video Tutorials by Morthawt ipify Monkey's are, like, natures humans. Link to comment Share on other sites More sharing options...
UEZ Posted February 26, 2015 Share Posted February 26, 2015 (edited) You have to check your code in the WM_NOTIFY function -> $LVN_ITEMCHANGED and $NM_CUSTOMDRAW. If you disable those check it will work properly but you have no explicitly cell selection. Br, UEZ Edited February 26, 2015 by UEZ JohnOne 1 Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
mLipok Posted February 26, 2015 Share Posted February 26, 2015 (edited) do you want to select X ?? Edit: I mean: 0-0| |0-2 |1-1| 2-0| |2-2 Edited February 26, 2015 by mlipok JohnOne 1 Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24 Link to comment Share on other sites More sharing options...
kylomas Posted February 26, 2015 Share Posted February 26, 2015 (edited) J1, This works for me... <code deleted> To recolor the items I believe you have to loop back throught the listview, not sure though... Have you seen M23's listview UDF? I think it's called _GuiCtrlListViewEX... Edited February 26, 2015 by kylomas JohnOne 1 Forum Rules Procedure for posting code "I like pigs. Dogs look up to us. Cats look down on us. Pigs treat us as equals." - Sir Winston Churchill Link to comment Share on other sites More sharing options...
JohnOne Posted February 26, 2015 Author Share Posted February 26, 2015 If I comment out customdraw... expandcollapse popupSwitch $iCode Case $NM_CLICK $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam) $aHit[0] = $tInfo.Index $aHit[1] = $tInfo.SubItem ;#cs Case $LVN_ITEMCHANGED Local $tNMLISTVIEW, $iItem, $aInfo $tNMLISTVIEW = DllStructCreate($tagNMLISTVIEW, $lParam) $iItem = DllStructGetData($tNMLISTVIEW, "Item") _GUICtrlListView_SetItemSelected($hListview, $iItem, False) Local $aInfo = GUIGetCursorInfo($hGUI) If $aInfo[2] Then $aInfo = _GUICtrlListView_SubItemHitTest($hListview, $aInfo[0] - 2, $aInfo[1] - 2) ; Upper left = ( 2, 2 ) If $aInfo[0] > -1 And $aInfo[1] > -1 And $aInfo[0] = $iItem Then If $aHit[0] > -1 Then _GUICtrlListView_RedrawItems($hListview, $aHit[0], $aHit[0]) If $aHit[0] <> $aInfo[0] Or $aHit[1] <> $aInfo[1] Then $aHit[0] = $aInfo[0] ; Row $aHit[1] = $aInfo[1] ; Col Else $aHit[0] = -1 ; Row $aHit[1] = -1 ; Col EndIf _GUICtrlListView_RedrawItems($hListview, $iItem, $iItem) EndIf EndIf ;#ce #cs Case $NM_CUSTOMDRAW Local $tNMLVCUSTOMDRAW = DllStructCreate($tagNMLVCUSTOMDRAW, $lParam) Local $dwDrawStage = DllStructGetData($tNMLVCUSTOMDRAW, "dwDrawStage") Switch $dwDrawStage ; Holds a value that specifies the drawing stage Case $CDDS_PREPAINT ; Before the paint cycle begins Return $CDRF_NOTIFYITEMDRAW ; Notify the parent window of any ITEM-related drawing operations Case $CDDS_ITEMPREPAINT ; Before painting an item Return $CDRF_NOTIFYSUBITEMDRAW ; Notify the parent window of any SUBITEM-related drawing operations Case BitOR($CDDS_ITEMPREPAINT, $CDDS_SUBITEM) ; Before painting a subitem Local $dwItemSpec = DllStructGetData($tNMLVCUSTOMDRAW, "dwItemSpec") ; Item index Local $iSubItem = DllStructGetData($tNMLVCUSTOMDRAW, "iSubItem") ; Subitem index Local $uItemState = DllStructGetData($tNMLVCUSTOMDRAW, "uItemState") ; Item state If $dwItemSpec = $aHit[0] Then ; Marked row Switch $iSubItem Case $aHit[1] ; Marked column DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0xFFFFFF) ; Forecolor white DllStructSetData($tNMLVCUSTOMDRAW, "clrTextBk", 0xCC6600) ; Backcolor dark blue, BGR Case Else ; Other columns DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0x000000) ; Forecolor black DllStructSetData($tNMLVCUSTOMDRAW, "ClrTextBk", 0xFFFFFF) ; Backcolor white EndSwitch Else ; Other rows DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0x000000) DllStructSetData($tNMLVCUSTOMDRAW, "ClrTextBk", 0xFFFFFF) EndIf Return $CDRF_NEWFONT ; $CDRF_NEWFONT must be returned after changing font or colors EndSwitch #ce EndSwitch Then the correct item is returned, but obviously no selection is shown. I'm looking at the code in that block for a while, but my head is just spinning. AutoIt Absolute Beginners Require a serial Pause Script Video Tutorials by Morthawt ipify Monkey's are, like, natures humans. Link to comment Share on other sites More sharing options...
JohnOne Posted February 26, 2015 Author Share Posted February 26, 2015 That for me.. AutoIt Absolute Beginners Require a serial Pause Script Video Tutorials by Morthawt ipify Monkey's are, like, natures humans. Link to comment Share on other sites More sharing options...
UEZ Posted February 26, 2015 Share Posted February 26, 2015 Just relax awhile watching a european league match which has just started. I'm watching Sporting Lissabon - Wolfburg... Br, UEZ JohnOne 1 Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
kylomas Posted February 26, 2015 Share Posted February 26, 2015 Belay the above, the cell selection is jumping all over the place...sorry... JohnOne 1 Forum Rules Procedure for posting code "I like pigs. Dogs look up to us. Cats look down on us. Pigs treat us as equals." - Sir Winston Churchill Link to comment Share on other sites More sharing options...
mLipok Posted February 26, 2015 Share Posted February 26, 2015 Maybe here you can find your hints I'am thinking about makeing an array to check what was clicked , and using this array to change back color in selected cell. JohnOne 1 Signature beginning:* Please remember: "AutoIt"..... * Wondering who uses AutoIt and what it can be used for ? * Forum Rules ** ADO.au3 UDF * POP3.au3 UDF * XML.au3 UDF * IE on Windows 11 * How to ask ChatGPT for AutoIt Code * for other useful stuff click the following button: Spoiler Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind. My contribution (my own projects): * Debenu Quick PDF Library - UDF * Debenu PDF Viewer SDK - UDF * Acrobat Reader - ActiveX Viewer * UDF for PDFCreator v1.x.x * XZip - UDF * AppCompatFlags UDF * CrowdinAPI UDF * _WinMergeCompare2Files() * _JavaExceptionAdd() * _IsBeta() * Writing DPI Awareness App - workaround * _AutoIt_RequiredVersion() * Chilkatsoft.au3 UDF * TeamViewer.au3 UDF * JavaManagement UDF * VIES over SOAP * WinSCP UDF * GHAPI UDF - modest begining - comunication with GitHub REST API * ErrorLog.au3 UDF - A logging Library * Include Dependency Tree (Tool for analyzing script relations) * Show_Macro_Values.au3 * My contribution to others projects or UDF based on others projects: * _sql.au3 UDF * POP3.au3 UDF * RTF Printer - UDF * XML.au3 UDF * ADO.au3 UDF * SMTP Mailer UDF * Dual Monitor resolution detection * * 2GUI on Dual Monitor System * _SciLexer.au3 UDF * SciTE - Lexer for console pane * Useful links: * Forum Rules * Forum etiquette * Forum Information and FAQs * How to post code on the forum * AutoIt Online Documentation * AutoIt Online Beta Documentation * SciTE4AutoIt3 getting started * Convert text blocks to AutoIt code * Games made in Autoit * Programming related sites * Polish AutoIt Tutorial * DllCall Code Generator * Wiki: * Expand your knowledge - AutoIt Wiki * Collection of User Defined Functions * How to use HelpFile * Good coding practices in AutoIt * OpenOffice/LibreOffice/XLS Related: WriterDemo.au3 * XLS/MDB from scratch with ADOX IE Related: * How to use IE.au3 UDF with AutoIt v3.3.14.x * Why isn't Autoit able to click a Javascript Dialog? * Clicking javascript button with no ID * IE document >> save as MHT file * IETab Switcher (by LarsJ ) * HTML Entities * _IEquerySelectorAll() (by uncommon) * IE in TaskScheduler * IE Embedded Control Versioning (use IE9+ and HTML5 in a GUI) * PDF Related: * How to get reference to PDF object embeded in IE * IE on Windows 11 * I encourage you to read: * Global Vars * Best Coding Practices * Please explain code used in Help file for several File functions * OOP-like approach in AutoIt * UDF-Spec Questions * EXAMPLE: How To Catch ConsoleWrite() output to a file or to CMD *I also encourage you to check awesome @trancexx code: * Create COM objects from modules without any demand on user to register anything. * Another COM object registering stuff * OnHungApp handler * Avoid "AutoIt Error" message box in unknown errors * HTML editor * winhttp.au3 related : * https://www.autoitscript.com/forum/topic/206771-winhttpau3-download-problem-youre-speaking-plain-http-to-an-ssl-enabled-server-port/ "Homo sum; humani nil a me alienum puto" - Publius Terentius Afer"Program are meant to be read by humans and only incidentally for computers and execute" - Donald Knuth, "The Art of Computer Programming" , be and \\//_. Anticipating Errors : "Any program that accepts data from a user must include code to validate that data before sending it to the data store. You cannot rely on the data store, ...., or even your programming language to notify you of problems. You must check every byte entered by your users, making sure that data is the correct type for its field and that required fields are not empty." Signature last update: 2023-04-24 Link to comment Share on other sites More sharing options...
Moderators Solution Melba23 Posted February 26, 2015 Moderators Solution Share Posted February 26, 2015 JohnOne,You need to set the correct coordinates of your ListView in this line:$aInfo = _GUICtrlListView_SubItemHitTest($hListview, $aInfo[0] - 2, $aInfo[1] - 20) ; Upper left = ( 2, 20 )As you still had the coordinates of the other example it was not giving you the correct return in $aHit. M23 JohnOne 1 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
JohnOne Posted February 26, 2015 Author Share Posted February 26, 2015 Just relax awhile watching a european league match which has just started. I'm watching Sporting Lissabon - Wolfburg... Br, UEZ It's OK I'm watching Everton v Young Boys. Everton 0-1 Young Boys. AutoIt Absolute Beginners Require a serial Pause Script Video Tutorials by Morthawt ipify Monkey's are, like, natures humans. Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 26, 2015 Moderators Share Posted February 26, 2015 JohnOne,Hope your luck changes - and look at post #14. M23 JohnOne 1 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
JohnOne Posted February 26, 2015 Author Share Posted February 26, 2015 You;re an absolute diamond M. Thank you very much, and all. AutoIt Absolute Beginners Require a serial Pause Script Video Tutorials by Morthawt ipify Monkey's are, like, natures humans. Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 26, 2015 Moderators Share Posted February 26, 2015 JohnOne,My pleasure as always. M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
kylomas Posted February 26, 2015 Share Posted February 26, 2015 Damn it, M23... expandcollapse popup#include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <GuiListView.au3> Global $hGUI, $hListview, $aHit[2] = [-1, -1] $hGUI = GUICreate("Listview in TAB", 250, 180) GUISetBkColor(0x00E0FFFF) GUISetFont(9, 300) Local $idTab = GUICtrlCreateTab(0, 0, 250, 130) GUICtrlCreateTabItem("tab") $iListview = GUICtrlCreateListView("one|two|three", 0, 20, 350, 130, $LVS_REPORT, BitOR($LVS_EX_GRIDLINES, $LVS_EX_FULLROWSELECT)) $hListview = GUICtrlGetHandle($iListview) GUICtrlCreateListViewItem("0-0|0-1|0-2", $iListview) GUICtrlCreateListViewItem("1-0|1-1|1-2", $iListview) GUICtrlCreateListViewItem("2-0|2-1|2-2", $iListview) GUICtrlCreateTabItem("") $hButton = GUICtrlCreateButton("Click", 0, 155, 250, 20) GUISetState(@SW_SHOW) GUIRegisterMsg($WM_NOTIFY, "WM_NOTIFY") Local $idMsg While 2 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $hButton MsgBox(0, "Info", "Cell selected: " & _GUICtrlListView_GetItemText($hListview, $aHit[0], $aHit[1]) & @CR, 0, $hGUI) EndSwitch WEnd Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) Local $tNMHDR, $hWndFrom, $iCode $tNMHDR = DllStructCreate($tagNMHDR, $lParam) Switch $tNMHDR.hWndFrom Case $hListview Switch $tNMHDR.Code Case $LVN_ITEMCHANGED Local $tNMLISTVIEW, $iItem, $aInfo $tNMLISTVIEW = DllStructCreate($tagNMLISTVIEW, $lParam) $iItem = DllStructGetData($tNMLISTVIEW, "Item") _GUICtrlListView_SetItemSelected($hListview, $iItem, false) Local $aInfo = GUIGetCursorInfo($hGUI) If $aInfo[2] Then $aInfo = _GUICtrlListView_SubItemHitTest($hListview) ; Upper left = ( 2, 2 ) If $aInfo[0] > -1 And $aInfo[1] > -1 And $aInfo[0] = $iItem Then If $aHit[0] > -1 Then _GUICtrlListView_RedrawItems($hListview, $aHit[0], $aHit[0]) If $aHit[0] <> $aInfo[0] Or $aHit[1] <> $aInfo[1] Then $aHit[0] = $aInfo[0] ; Row $aHit[1] = $aInfo[1] ; Col Else $aHit[0] = -1 ; Row $aHit[1] = -1 ; Col EndIf _GUICtrlListView_RedrawItems($hListview, $iItem, $iItem) EndIf EndIf Case $NM_CLICK $tInfo = DllStructCreate($tagNMITEMACTIVATE, $lParam) $aHit[0] = $tInfo.Index $aHit[1] = $tInfo.SubItem Case $NM_CUSTOMDRAW Local $tNMLVCUSTOMDRAW = DllStructCreate($tagNMLVCUSTOMDRAW, $lParam) Local $dwDrawStage = DllStructGetData($tNMLVCUSTOMDRAW, "dwDrawStage") Switch $dwDrawStage ; Holds a value that specifies the drawing stage Case $CDDS_PREPAINT ; Before the paint cycle begins Return $CDRF_NOTIFYITEMDRAW ; Notify the parent window of any ITEM-related drawing operations Case $CDDS_ITEMPREPAINT ; Before painting an item Return $CDRF_NOTIFYSUBITEMDRAW ; Notify the parent window of any SUBITEM-related drawing operations Case BitOR($CDDS_ITEMPREPAINT, $CDDS_SUBITEM) ; Before painting a subitem Local $dwItemSpec = DllStructGetData($tNMLVCUSTOMDRAW, "dwItemSpec") ; Item index Local $iSubItem = DllStructGetData($tNMLVCUSTOMDRAW, "iSubItem") ; Subitem index Local $uItemState = DllStructGetData($tNMLVCUSTOMDRAW, "uItemState") ; Item state If $dwItemSpec = $aHit[0] Then ; Marked row Switch $iSubItem Case $aHit[1] ; Marked column DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0xFFFFFF) ; Forecolor white DllStructSetData($tNMLVCUSTOMDRAW, "clrTextBk", 0xCC6600) ; Backcolor dark blue, BGR Case Else ; Other columns DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0x000000) ; Forecolor black DllStructSetData($tNMLVCUSTOMDRAW, "ClrTextBk", 0xFFFFFF) ; Backcolor white EndSwitch Else ; Other rows DllStructSetData($tNMLVCUSTOMDRAW, "ClrText", 0x000000) DllStructSetData($tNMLVCUSTOMDRAW, "ClrTextBk", 0xFFFFFF) EndIf Return $CDRF_NEWFONT ; $CDRF_NEWFONT must be returned after changing font or colors EndSwitch EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFY JohnOne 1 Forum Rules Procedure for posting code "I like pigs. Dogs look up to us. Cats look down on us. Pigs treat us as equals." - Sir Winston Churchill Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now