Mungo Posted December 29, 2014 Share Posted December 29, 2014 (edited) I tried to come up with a simple toolbar which displays the plain icons (without a button frame) but also shows a button effect when hovered or clicked on. My approach was to create a button, add an icon and hide the icon button again. Then place the icon without the button on top of it. When the mouse is moved over the icon I hide the icon (which leaves button displayed) giving me the hover effect for hover and clicks (using GUIGetCursorInfo() to get the icon ID). It seem to work ... but sometimes the hover effect does not show as expected especially when the mouse is moved slowly to the edge of the icon. While the icon ID is being read and action triggered (see Mouse OVER text) the icon itself is not being hidden (and button displayed). I found that the effect is more likely to occur when the GUI is freshly loaded. Can anyone reproduce this effect? I wonder what may causes this effect or is anything wrong in my coding? Any hint and support would be appreciated! Many thanks expandcollapse popup#include <StaticConstants.au3> #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> Opt('MustDeclareVars', 1) f_toolbar() Func f_toolbar() Local $id_button_1_a, $id_button_2_a, $id_button_3_a Local $id_button_1_b, $id_button_2_b, $id_button_3_b Local $id_button_close Local $h_toolbar_gui, $msg_pop, $id_output_lbl ; -- Declare and set mouse over variables Local $last_tool_b_id = 0 ; ID of last button/icon visited Local $a_cursor_b_info ; GUIGetCursorInfo() array Local $win_w = 400 ; GUI width Local $win_h = 400 ; GUI height Local $icon_file = @SystemDir & "\shell32.dll" ; -- Create the GUI ------------------------------------------------------------------------------------------------------- $h_toolbar_gui = GUICreate("Toolbar hover - Test ...", $win_w, $win_h) ; -- A frame for the toolbar GUICtrlCreateLabel("", 3, 3, $win_w-3, 44, $SS_ETCHEDFRAME ) GUICtrlSetState(-1, $GUI_DISABLE) ; -- The Toolbar ; -- 1. Toolbar button ----------------------------------------------------------------------------------------------------- $id_button_1_a = GUICtrlCreateButton("1", 4, 4, 40, 40, $BS_ICON) ; Create BUTTON GUICtrlSetImage(-1, $icon_file, -71, 1) ; Add ICON to button GUICtrlSetState(-1, $GUI_HIDE) ; Hide ICON BUTTON again $id_button_1_b = GUICtrlCreateIcon($icon_file, -71, 4, 4, 40, 40, $BS_CENTER) ; Create ICON to display ; -- 2. Toolbar button ----------------------------------------------------------------------------------------------------- $id_button_2_a = GUICtrlCreateButton("2", 44, 4, 40, 40, $BS_ICON) ; Create BUTTON GUICtrlSetImage(-1, $icon_file, -5, 1) ; Add ICON to button GUICtrlSetState(-1, $GUI_HIDE) ; Hide ICON BUTTON again $id_button_2_b = GUICtrlCreateIcon($icon_file, -5, 44, 4, 40, 40, $BS_CENTER) ; Create ICON to display ; -- 3. Toolbar button ----------------------------------------------------------------------------------------------------- $id_button_3_a = GUICtrlCreateButton("3", 84, 4, 40, 40, $BS_ICON) GUICtrlSetImage(-1, $icon_file, -28, 1) ; Add ICON to button GUICtrlSetState(-1, $GUI_HIDE) ; Hide ICON BUTTON again $id_button_3_b = GUICtrlCreateIcon($icon_file, -28, 84, 4, 40, 40, $BS_CENTER) ; Create ICON to display ; -- Lable CTRL for feedback $id_output_lbl = GUICtrlCreateLabel("Move mouse over toolbar ...", 4, 100, $win_w-8, 16) ; Lable for feedback GUICtrlSetBkColor($id_output_lbl, 0xFFFFFF) ; -- The Close button $id_button_close = GUICtrlCreateButton("Close", $win_w/2-40, $win_h-40, 80, 24, $BS_DEFPUSHBUTTON) GUISetState(@SW_SHOW) While 1 $msg_pop = GUIGetMsg() Select Case $msg_pop = $GUI_EVENT_CLOSE ExitLoop Case $msg_pop = $id_button_close ExitLoop Case $msg_pop = $id_button_1_a Or $msg_pop = $id_button_1_b GUICtrlSetState($id_button_1_a, $GUI_SHOW) ; Show BUTTON MsgBox(32, "DEBUG", "Button 1 pressed ...", 0, $h_toolbar_gui) Case $msg_pop = $id_button_2_a Or $msg_pop = $id_button_2_b GUICtrlSetState($id_button_2_a, $GUI_SHOW) ; Show BUTTON MsgBox(32, "DEBUG", "Button 2 pressed ...", 0, $h_toolbar_gui) Case $msg_pop = $id_button_3_a Or $msg_pop = $id_button_3_b GUICtrlSetState($id_button_3_a, $GUI_SHOW) ; Show BUTTON MsgBox(32, "DEBUG", "Button 3 pressed ...", 0, $h_toolbar_gui) Case Else $a_cursor_b_info = GUIGetCursorInfo($h_toolbar_gui) ; - $aArray[4] = ID of the control that the mouse cursor is hovering over (or 0 if none) Select ; -- Button 1 - Cursor ------------------------------------------------------------------------------------- Case $a_cursor_b_info[4] = $id_button_1_b And $last_tool_b_id <> $id_button_1_b And $last_tool_b_id = 0 ; MOUSE OVER GUICtrlSetState($id_button_1_a, $GUI_SHOW) ; Show BUTTON GUICtrlSetData($id_output_lbl, "Mouse OVER - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0xFFFF00) $last_tool_b_id = $id_button_1_b ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- Case $a_cursor_b_info[4] <> $id_button_1_b And $last_tool_b_id = $id_button_1_b ; NO MOUSE OVER GUICtrlSetState($id_button_1_a, $GUI_HIDE) ; Hide BUTTON $a_cursor_b_info[4] = 0 GUICtrlSetData($id_output_lbl, "Mouse AWAY - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0x99CCFF) $last_tool_b_id = 0 ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- ; -- Button 2 - Cursor ------------------------------------------------------------------------------------- Case $a_cursor_b_info[4] = $id_button_2_b And $last_tool_b_id <> $id_button_2_b And $last_tool_b_id = 0 ; MOUSE OVER GUICtrlSetState($id_button_2_a, $GUI_SHOW) ; Show BUTTON GUICtrlSetData($id_output_lbl, "Mouse OVER - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0xFFFF00) $last_tool_b_id = $id_button_2_b ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- Case $a_cursor_b_info[4] <> $id_button_2_b And $last_tool_b_id = $id_button_2_b ; NO MOUSE OVER GUICtrlSetState($id_button_2_a, $GUI_HIDE) ; Hide BUTTON $a_cursor_b_info[4] = 0 GUICtrlSetData($id_output_lbl, "Mouse AWAY - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0x99CCFF) $last_tool_b_id = 0 ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- ; -- Button 3 - Cursor ------------------------------------------------------------------------------------- Case $a_cursor_b_info[4] = $id_button_3_b And $last_tool_b_id <> $id_button_3_b And $last_tool_b_id = 0 ; MOUSE OVER GUICtrlSetState($id_button_3_a, $GUI_SHOW) ; Show BUTTON GUICtrlSetData($id_output_lbl, "Mouse OVER - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0xFFFF00) $last_tool_b_id = $id_button_3_b ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- Case $a_cursor_b_info[4] <> $id_button_3_b And $last_tool_b_id = $id_button_3_b ; NO MOUSE OVER GUICtrlSetState($id_button_3_a, $GUI_HIDE) ; Hide BUTTON $a_cursor_b_info[4] = 0 GUICtrlSetData($id_output_lbl, "Mouse AWAY - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0x99CCFF) $last_tool_b_id = 0 ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- EndSelect EndSelect WEnd GUIDelete() EndFunc ;==> f_toolbar() Edited December 29, 2014 by Mungo Link to comment Share on other sites More sharing options...
Yashied Posted December 29, 2014 Share Posted December 29, 2014 Look at _GUICtrlToolbar... functions. My UDFs: iKey | FTP Uploader | Battery Checker | Boot Manager | Font Viewer | UDF Keyword Manager | Run Dialog Replacement | USBProtect | 3D Axis | Calculator | Sleep | iSwitcher | TM | NetHelper | File Types Manager | Control Viewer | SynFolders | DLL Helper Animated Tray Icons UDF Library | Hotkeys UDF Library | Hotkeys Input Control UDF Library | Caret Shape UDF Library | Context Help UDF Library | Most Recently Used List UDF Library | Icons UDF Library | FTP UDF Library | Script Communications UDF Library | Color Chooser UDF Library | Color Picker Control UDF Library | IPHelper (Vista/7) UDF Library | WinAPI Extended UDF Library | WinAPIVhd UDF Library | Icon Chooser UDF Library | Copy UDF Library | Restart UDF Library | Event Log UDF Library | NotifyBox UDF Library | Pop-up Windows UDF Library | TVExplorer UDF Library | GuiHotKey UDF Library | GuiSysLink UDF Library | Package UDF Library | Skin UDF Library | AITray UDF Library | RDC UDF Library Appropriate path | Button text color | Gaussian random numbers | Header's styles (Vista/7) | ICON resource enumeration | Menu & INI | Tabbed string size | Tab's skin | Pop-up circular menu | Progress Bar without animation (Vista/7) | Registry export | Registry path jumping | Unique hardware ID | Windows alignment More... Link to comment Share on other sites More sharing options...
Mungo Posted December 29, 2014 Author Share Posted December 29, 2014 Thanks Yashied, Yes, I try to get my head around the powerful _GUICtrlToolbar_... and _GUICtrlRebar_...  functions ... However, still try to understand why my example behaves the way it does ... icon not hiding despite action triggered ? Well, I try keep learning all the time. Cheers Link to comment Share on other sites More sharing options...
Yashied Posted December 29, 2014 Share Posted December 29, 2014 The problem in overlapping controls. expandcollapse popup#include <StaticConstants.au3> #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> Opt('MustDeclareVars', 1) f_toolbar() Func f_toolbar() Local $id_button_1_a, $id_button_2_a, $id_button_3_a Local $id_button_1_b, $id_button_2_b, $id_button_3_b Local $id_button_close Local $h_toolbar_gui, $msg_pop, $id_output_lbl ; -- Declare and set mouse over variables Local $last_tool_b_id = 0 ; ID of last button/icon visited Local $a_cursor_b_info ; GUIGetCursorInfo() array Local $win_w = 400 ; GUI width Local $win_h = 400 ; GUI height Local $icon_file = @SystemDir & "\shell32.dll" ; -- Create the GUI ------------------------------------------------------------------------------------------------------- $h_toolbar_gui = GUICreate("Toolbar hover - Test ...", $win_w, $win_h) ; -- A frame for the toolbar GUICtrlCreateLabel("", 3, 3, $win_w-3, 44, $SS_ETCHEDFRAME ) GUICtrlSetState(-1, $GUI_DISABLE) ; -- The Toolbar ; -- 1. Toolbar button ----------------------------------------------------------------------------------------------------- $id_button_1_a = GUICtrlCreateButton("1", 4, 4, 40, 40, $BS_ICON) ; Create BUTTON GUICtrlSetImage(-1, $icon_file, -71, 1) ; Add ICON to button GUICtrlSetState(-1, $GUI_HIDE) ; Hide ICON BUTTON again $id_button_1_b = GUICtrlCreateIcon($icon_file, -71, 4, 4, 40, 40, $BS_CENTER) ; Create ICON to display ; -- 2. Toolbar button ----------------------------------------------------------------------------------------------------- $id_button_2_a = GUICtrlCreateButton("2", 44, 4, 40, 40, $BS_ICON) ; Create BUTTON GUICtrlSetImage(-1, $icon_file, -5, 1) ; Add ICON to button GUICtrlSetState(-1, $GUI_HIDE) ; Hide ICON BUTTON again $id_button_2_b = GUICtrlCreateIcon($icon_file, -5, 44, 4, 40, 40, $BS_CENTER) ; Create ICON to display ; -- 3. Toolbar button ----------------------------------------------------------------------------------------------------- $id_button_3_a = GUICtrlCreateButton("3", 84, 4, 40, 40, $BS_ICON) GUICtrlSetImage(-1, $icon_file, -28, 1) ; Add ICON to button GUICtrlSetState(-1, $GUI_HIDE) ; Hide ICON BUTTON again $id_button_3_b = GUICtrlCreateIcon($icon_file, -28, 84, 4, 40, 40, $BS_CENTER) ; Create ICON to display ; -- Lable CTRL for feedback $id_output_lbl = GUICtrlCreateLabel("Move mouse over toolbar ...", 4, 100, $win_w-8, 16) ; Lable for feedback GUICtrlSetBkColor($id_output_lbl, 0xFFFFFF) ; -- The Close button $id_button_close = GUICtrlCreateButton("Close", $win_w/2-40, $win_h-40, 80, 24, $BS_DEFPUSHBUTTON) GUISetState(@SW_SHOW) While 1 $msg_pop = GUIGetMsg() Select Case $msg_pop = $GUI_EVENT_CLOSE ExitLoop Case $msg_pop = $id_button_close ExitLoop Case $msg_pop = $id_button_1_a Or $msg_pop = $id_button_1_b GUICtrlSetState($id_button_1_a, $GUI_SHOW) MsgBox(32, "DEBUG", "Button 1 pressed ...", 0, $h_toolbar_gui) Case $msg_pop = $id_button_2_a Or $msg_pop = $id_button_2_b GUICtrlSetState($id_button_2_a, $GUI_SHOW) MsgBox(32, "DEBUG", "Button 2 pressed ...", 0, $h_toolbar_gui) Case $msg_pop = $id_button_3_a Or $msg_pop = $id_button_3_b GUICtrlSetState($id_button_3_a, $GUI_SHOW) MsgBox(32, "DEBUG", "Button 3 pressed ...", 0, $h_toolbar_gui) Case Else $a_cursor_b_info = GUIGetCursorInfo($h_toolbar_gui) ; - $aArray[4] = ID of the control that the mouse cursor is hovering over (or 0 if none) Select ; -- Button 1 - Cursor ------------------------------------------------------------------------------------- Case $a_cursor_b_info[4] = $id_button_1_b And $last_tool_b_id = 0 ; MOUSE OVER GUICtrlSetState($id_button_1_a, $GUI_SHOW) GUICtrlSetState($id_button_1_b, $GUI_HIDE) GUICtrlSetData($id_output_lbl, "Mouse OVER - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0xFFFF00) _Swap($id_button_1_a, $id_button_1_b) $last_tool_b_id = $id_button_1_b ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- Case $a_cursor_b_info[4] <> $id_button_1_b And $last_tool_b_id = $id_button_1_b ; NO MOUSE OVER GUICtrlSetState($id_button_1_a, $GUI_SHOW) GUICtrlSetState($id_button_1_b, $GUI_HIDE) $a_cursor_b_info[4] = 0 GUICtrlSetData($id_output_lbl, "Mouse AWAY - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0x99CCFF) _Swap($id_button_1_a, $id_button_1_b) $last_tool_b_id = 0 ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- ; -- Button 2 - Cursor ------------------------------------------------------------------------------------- Case $a_cursor_b_info[4] = $id_button_2_b And $last_tool_b_id = 0 ; MOUSE OVER GUICtrlSetState($id_button_2_a, $GUI_SHOW) GUICtrlSetState($id_button_2_b, $GUI_HIDE) GUICtrlSetData($id_output_lbl, "Mouse OVER - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0xFFFF00) _Swap($id_button_2_a, $id_button_2_b) $last_tool_b_id = $id_button_2_b ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- Case $a_cursor_b_info[4] <> $id_button_2_b And $last_tool_b_id = $id_button_2_b ; NO MOUSE OVER GUICtrlSetState($id_button_2_a, $GUI_SHOW) GUICtrlSetState($id_button_2_b, $GUI_HIDE) $a_cursor_b_info[4] = 0 GUICtrlSetData($id_output_lbl, "Mouse AWAY - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0x99CCFF) _Swap($id_button_2_a, $id_button_2_b) $last_tool_b_id = 0 ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- ; -- Button 3 - Cursor ------------------------------------------------------------------------------------- Case $a_cursor_b_info[4] = $id_button_3_b And $last_tool_b_id = 0 ; MOUSE OVER GUICtrlSetState($id_button_3_a, $GUI_SHOW) GUICtrlSetState($id_button_3_b, $GUI_HIDE) GUICtrlSetData($id_output_lbl, "Mouse OVER - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0xFFFF00) _Swap($id_button_3_a, $id_button_3_b) $last_tool_b_id = $id_button_3_b ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- Case $a_cursor_b_info[4] <> $id_button_3_b And $last_tool_b_id = $id_button_3_b ; NO MOUSE OVER GUICtrlSetState($id_button_3_a, $GUI_SHOW) GUICtrlSetState($id_button_3_b, $GUI_HIDE) $a_cursor_b_info[4] = 0 GUICtrlSetData($id_output_lbl, "Mouse AWAY - Ctrl ID:" & @TAB & $a_cursor_b_info[4]) GUICtrlSetBkColor($id_output_lbl, 0x99CCFF) _Swap($id_button_3_a, $id_button_3_b) $last_tool_b_id = 0 ; -- DEBUG ----------------------------------------------------------------- ConsoleWrite("> ... " & "$last_tool_b_id - Ctrl ID:" & @TAB & $last_tool_b_id & @CRLF) ; -- DEBUG ----------------------------------------------------------------- EndSelect EndSelect WEnd GUIDelete() EndFunc ;==> f_toolbar() Func _Swap(ByRef $iNum1, ByRef $iNum2) Local $Temp = $iNum1 $iNum1 = $iNum2 $iNum2 = $Temp EndFunc ;==>_SwapHere is a complete example of using Toolbar control. expandcollapse popup#Include <GUIConstantsEx.au3> #Include <GUIImageList.au3> #Include <GUIToolbar.au3> #Include <StaticConstants.au3> #Include <ToolbarConstants.au3> #Include <WindowsConstants.au3> #Include <WinAPIEx.au3> $hForm = GUICreate('MyGUI', 332, 332) $hTool = GUICreate('', 332, 64, 0, 0, $WS_CHILD, 0, $hForm) $Dummy = GUICtrlCreateDummy() $hToolbar = _GUICtrlToolbar_Create($hTool, BitOR($BTNS_BUTTON, $BTNS_SHOWTEXT, $TBSTYLE_FLAT, $TBSTYLE_TOOLTIPS), $TBSTYLE_EX_DOUBLEBUFFER) $hImageList = _GUIImageList_Create(32, 32, 5, 1, 5) Dim $Icon[5] = [19, 205, 298, 300, 304] For $i = 0 To 4 $hIcon = _WinAPI_ShellExtractIcon(@SystemDir & '\shell32.dll', $Icon[$i], 32, 32) _GUIImageList_ReplaceIcon($hImageList, -1, $hIcon) _WinAPI_DestroyIcon($hIcon) Next _GUICtrlToolbar_SetImageList($hToolbar, $hImageList) _GUICtrlToolbar_AddString($hToolbar, 'Button 1') _GUICtrlToolbar_AddString($hToolbar, 'Button 2') _GUICtrlToolbar_AddString($hToolbar, 'Button 3') _GUICtrlToolbar_AddString($hToolbar, 'Button 4') _GUICtrlToolbar_AddString($hToolbar, 'Button 5') _GUICtrlToolbar_AddButton($hToolbar, 10000, 0, 0) _GUICtrlToolbar_AddButton($hToolbar, 10001, 1, 1) _GUICtrlToolbar_AddButtonSep($hToolbar, 5) _GUICtrlToolbar_AddButton($hToolbar, 10002, 2, 2) _GUICtrlToolbar_AddButton($hToolbar, 10003, 3, 3) _GUICtrlToolbar_AddButton($hToolbar, 10004, 4, 4) _GUICtrlToolbar_SetButtonSize($hToolbar, 64, 64) _GUICtrlToolbar_SetMetrics($hToolbar, 0, 0, 1, 0) _GUICtrlToolbar_SetIndent($hToolbar, 1) _SendMessage($hToolbar, $TB_AUTOSIZE) GUISwitch($hForm) ; Main GUI controls... GUICtrlCreateLabel('', 0, 64, 335, 2, $SS_ETCHEDHORZ) GUIRegisterMsg($WM_COMMAND, 'WM_COMMAND') GUIRegisterMsg($WM_NOTIFY, 'WM_NOTIFY') GUISetState(@SW_SHOWNOACTIVATE, $hTool) GUISetState(@SW_SHOW, $hForm) While 1 Switch GUIGetMsg() Case 0 ContinueLoop Case $GUI_EVENT_CLOSE ExitLoop Case $Dummy $ID = GUICtrlRead($Dummy) Switch $ID Case 10000 ; Button 1 MsgBox(64, 'Toolbar', 'Button 1 has been pressed!', 0, $hForm) Case 10001 ; Button 2 MsgBox(64, 'Toolbar', 'Button 2 has been pressed!', 0, $hForm) Case 10002 ; Button 3 MsgBox(64, 'Toolbar', 'Button 3 has been pressed!', 0, $hForm) Case 10003 ; Button 4 MsgBox(64, 'Toolbar', 'Button 4 has been pressed!', 0, $hForm) Case 10004 ; Button 5 MsgBox(64, 'Toolbar', 'Button 5 has been pressed!', 0, $hForm) Case Else EndSwitch EndSwitch WEnd Func WM_COMMAND($hWnd, $iMsg, $wParam, $lParam) Local $ID = BitAND($wParam, 0xFFFF) Switch $hWnd Case $hTool Switch $ID Case 10000 To 10004 ; Button 1 - Button 5 GUICtrlSendToDummy($Dummy, $ID) Case Else EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_COMMAND Func WM_NOTIFY($hWnd, $iMsg, $wParam, $lParam) Local $tNMIA = DllStructCreate($tagNMITEMACTIVATE, $lParam) Local $hTarget = DllStructGetData($tNMIA, 'hWndFrom') Local $ID = DllStructGetData($tNMIA, 'Code') Switch $hWnd Case $hTool Switch $hTarget Case $hToolbar Switch $ID Case $TBN_GETINFOTIPW ;~ Local $tNMTBGIT = DllStructCreate($tagNMTBGETINFOTIP, $lParam) Local $tNMTBGIT = DllStructCreate($tagNMHDR & ';ptr Text;int TextMax;int Item;lparam lParam;', $lParam) Local $Item = DllStructGetData($tNMTBGIT, 'Item') Local $Text = '' Switch $Item Case 10000 ; Button 1 $Text = 'Tooltip 1' Case 10001 ; Button 2 $Text = 'Tooltip 2' Case 10002 ; Button 3 $Text = 'Tooltip 3' Case 10003 ; Button 4 $Text = 'Tooltip 4' Case 10004 ; Button 5 $Text = 'Tooltip 5' Case Else EndSwitch If $Text Then DllStructSetData(DllStructCreate('wchar[' & DllStructGetData($tNMTBGIT, 'TextMax') & ']', DllStructGetData($tNMTBGIT, 'Text')), 1, $Text) EndIf EndSwitch EndSwitch EndSwitch Return $GUI_RUNDEFMSG EndFunc ;==>WM_NOTIFYIn addition, you can use my Skin UDF. expandcollapse popup#Include <GDIPlus.au3> #Include <GUIConstantsEx.au3> #Include <Skin.au3> _GDIPlus_Startup() $hForm = GUICreate('MyGUI', 401, 160) GUISetBkColor(0xF0F0F0) $Button1 = _Skin_AddButton(12, 119, 29, 29, _LoadBitmap('down_normal.bmp'), _LoadBitmap('down_over.bmp'), _LoadBitmap('down_push.bmp')) $Button2 = _Skin_AddButton(46, 119, 29, 29, _LoadBitmap('up_normal.bmp'), _LoadBitmap('up_over.bmp'), _LoadBitmap('up_push.bmp')) $Button3 = _Skin_AddButton(87, 124, 29, 29, _LoadBitmap('down_normal_small.bmp'), _LoadBitmap('down_over_small.bmp'), _LoadBitmap('down_push_small.bmp')) $Button4 = _Skin_AddButton(111, 124, 29, 29, _LoadBitmap('up_normal_small.bmp'), _LoadBitmap('up_over_small.bmp'), _LoadBitmap('up_push_small.bmp')) $Button5 = _Skin_AddButton(323, 14, 64, 64, _LoadBitmap('cd_normal.bmp'), _LoadBitmap('cd_over_push.bmp'), _LoadBitmap('cd_over_push.bmp')) GUISetState() While 1 _Skin_Helper($hForm) $Msg = GUIGetMsg() Switch $Msg Case $GUI_EVENT_CLOSE ExitLoop Case $Button1 ConsoleWrite('#1' & @CR) Case $Button2 ConsoleWrite('#2' & @CR) Case $Button3 ConsoleWrite('#3' & @CR) Case $Button4 ConsoleWrite('#4' & @CR) Case $Button5 ConsoleWrite('#5' & @CR) EndSwitch WEnd GUIDelete() _Skin_Destroy() Func _LoadBitmap($sPath) Local $hBitmap, $hImage _GDIPlus_Startup() $hImage = _GDIPlus_ImageLoadFromFile($sPath) $hBitmap = _GDIPlus_BitmapCreateHBITMAPFromBitmap($hImage) _GDIPlus_ImageDispose($hImage) _GDIPlus_Shutdown() Return $hBitmap EndFunc ;==>_LoadBitmap Mungo, mLipok and mesale0077 3 My UDFs: iKey | FTP Uploader | Battery Checker | Boot Manager | Font Viewer | UDF Keyword Manager | Run Dialog Replacement | USBProtect | 3D Axis | Calculator | Sleep | iSwitcher | TM | NetHelper | File Types Manager | Control Viewer | SynFolders | DLL Helper Animated Tray Icons UDF Library | Hotkeys UDF Library | Hotkeys Input Control UDF Library | Caret Shape UDF Library | Context Help UDF Library | Most Recently Used List UDF Library | Icons UDF Library | FTP UDF Library | Script Communications UDF Library | Color Chooser UDF Library | Color Picker Control UDF Library | IPHelper (Vista/7) UDF Library | WinAPI Extended UDF Library | WinAPIVhd UDF Library | Icon Chooser UDF Library | Copy UDF Library | Restart UDF Library | Event Log UDF Library | NotifyBox UDF Library | Pop-up Windows UDF Library | TVExplorer UDF Library | GuiHotKey UDF Library | GuiSysLink UDF Library | Package UDF Library | Skin UDF Library | AITray UDF Library | RDC UDF Library Appropriate path | Button text color | Gaussian random numbers | Header's styles (Vista/7) | ICON resource enumeration | Menu & INI | Tabbed string size | Tab's skin | Pop-up circular menu | Progress Bar without animation (Vista/7) | Registry export | Registry path jumping | Unique hardware ID | Windows alignment More... Link to comment Share on other sites More sharing options...
Moderators SmOke_N Posted December 30, 2014 Moderators Share Posted December 30, 2014 Â In addition, you can use my Skin UDF. Â Â Nicely done Common sense plays a role in the basics of understanding AutoIt... If you're lacking in that, do us all a favor, and step away from the computer. Link to comment Share on other sites More sharing options...
Mungo Posted December 30, 2014 Author Share Posted December 30, 2014 (edited) Yashied, Thanks for the hint and addition to my coding - fixed the problem and learned and understood something new again Great examples for both the GuiToolbar as well as Skin UDFs. I probably will use both of them in different areas of my project. I already started to work through the GuiToolbar examples before but had problems piecing things together and got stuck. However, with getting your examples I gave it another shot and it looks much more promising now. Your example is nice and complete and it is much easier for me to comprehend now how it works (thumbs UP !). I just started and I am still working on it - and some questions undoubtedly will still arise Cheers Edited December 30, 2014 by Mungo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now