New SciTE4AutoIt3 available with SciTE v3.4.1

[Jos]

4/05/2014: Uploaded a new SciTE4AutoIt3.exe installer with the new SciTE v3.4.1 release.

These are the major changes:
- Ended all support for Obfuscator and removed from the installation!
- Added Au3Stripper which replaces Obfuscators /StripOnly Function.
- The installer will set SCITE_USERHOME to %LOCALAPPDATA%AutoIt v3SciTE. Each Utility will have its own subdirectory.
- In case SCITE_USERHOME is not supplied will SciTE default to the SciTE program directory for SciteUserHome to make SciTE portable.
- Changed SciTE/AutoIt3Wrapper/SciTEConfig to use SCITE_USERHOME as the home or all config files.
- Updated the ZIP file to allow it to run portable "as-is" after unzipping

Enjoy,
Jos

Addition/Changes/Fixes in the current installer:

expandcollapse popup

--------------------------------------------------------------------------------------------------
4/5/2014
*** Headlines:
    Ended all support for Obfuscator and removed from the installation!
    Added Au3Stripper which replaces Obfuscators /StripOnly Function.
    Changed SciTE & AutoIt3Wrapper & SciTEConfig to use SCITE_USERHOME as the home or all config files.
    The installer will set SCITE_USERHOME to %LOCALAPPDATA%\AutoIt v3\SciTE.
    Each Utility will have its own subdirectory in this directory.
    In case SCITE_USERHOME is not supplied will SciTE default to the SciTE program directory for SciteUserHome to make SciTE portable.
    Updated the ZIP file to allow it to run portable as is after unzipping.
*** Merged the SciTE v 3.4.1 by Neil Hodgson with our own version of SciTE. (Jos)
   - Added support for environment variable SCITE_USERHOME.
*** Updated AutoIt3Wrapper 2.2.0.0 (Jos)
    - Added support for AU3Stripper directives:
        #AutoIt3Wrapper_Run_Au3Stripper
        #Au3Stripper_*=
    - Added support for SCITE_USERHOME.
    - Removed support for Obfuscator
    - Fixed issue Resourceupdates giving error: LastError:1359:
*** Updated SciTEConfig v1.6.11.7
    - Updated tab for Genereal settings into 2 Tabs and added extra options. (Melba23)
    - Updates for Abbrev manager and User Calltip Manager. (Melba23)
    - Added support for SCITE_USERHOME. (Melba23)
*** Updated Tidy v2.4.0.1 (Jos)
    - Added support for SCITE_USERHOME.
*** Updated Au3Stripper v1.2.0.0 (Jos)
    - Added support for SCITE_USERHOME.
    - Added support for the following #Directives:
        #Au3Stripper_Ignore_Funcs=
        #Au3Stripper_Ignore_Variables=
        #Au3Stripper_Off=
        #Au3Stripper_On=
        #Au3Stripper_Parameters=
            - No parameter specified on this directive means /StripOnly or /SO will be performed.
            - /StripOnly Or /SO -> Sets the options to:/SF=1 /SV=1 which is now also the default when no parameters are specified.
            - /StripUnusedFunc Or /SF -> Remove unused Funcs (Default when no options are specified)
            - /StripUnusedVars Or /SV -> Remove unused Global variable declarations (Default when no options are specified)
            - /MergeOnly Or /MO -> Will produce a scriptfile as AUT2EXE includes in the Compiled EXE.This allows you to find the proper linenumber when errors are reported.
            - /RenameMinimum Or /RM -> Generates a much smaller file by substituting function and variable names with unique 2+-character names
            - /PreExpand pr /PE -> This will preexpand Global Const variables. Thanks guinness for the idea.
            - /MaxIterations= Or /MI= -> Sets the maximum Iterations Au3Stripper will perform. Default is 5.
                    Au3Stripper will continue until it hasn't stripped any lines or done this number of Iterations.
*** Updated SciTEJump to the latest version v2.17.103.242 (guinness)
    - Added support for SCITE_USERHOME.
--------------------------------------------------------------------------------------------------

==> ScitillaHistory page containing all SciTE/Scintilla updates.
==> Visit the SciTE4AutoIt3 Download page for the latest versions
==> Check the online documentation for an overview of all extra's you get with this installer.

Edited April 5, 2014 by Jos

[FaridAgl]

Sounds realy _really^really really interesting, going to give it a try right now.

Thank you.

Edit

2 quick reviews:

1. In SciTEConfig -> General 2 -> CallTip displayed above function

When I check this and click Save+Apply, seems like it get saved, but when I restart SciTE this checkbox is unchecked. Also I can't see any CallTip on any function while this is checked.

2. I can't find any config (ini) file for Tidy as it was in previous version.

Edited April 5, 2014 by D4RKON3

[Jos]

2. I can't find any config (ini) file for Tidy as it was in previous version.

 

Are you looking in  %LOCALAPPDATA%AutoIt v3SciTETidy ?

That is where it should be locate when using the standard installer.

Will check observation 1.

Cheers

Jos

[Jos]

1. In SciTEConfig -> General 2 -> CallTip displayed above function

When I check this and click Save+Apply, seems like it get saved, but when I restart SciTE this checkbox is unchecked. Also I can't see any CallTip on any function while this is checked.

 

Works fine for me and this is updated in %LOCALAPPDATA%AutoIt v3SciTESciTEUser.properties

## CallTips
# Display the calltip above the function
calltips.set.above=1

Jos

Edited April 5, 2014 by Jos

[FaridAgl]

Thanks, I found Tidy.ini.

About the CallTips, I checked the file you said, calltips.set.above is 1, but when I run SciTEConfig it's still unchecked and I can't see any CallTips in SciTE, however calltips.set.above's value is 1.

BTW, checked the Au3Stripper, really nice.

[Jos]

Thanks, I found Tidy.ini.

About the CallTips, I checked the file you said, calltips.set.above is 1, but when I run SciTEConfig it's still unchecked and I can't see any CallTips in SciTE, however calltips.set.above's value is 1.

BTW, checked the Au3Stripper, really nice.

The Calltip automatically shows when typing any function and the opening bracket eg: MsgBox(. shows

The tickbox makes it appear either below (Default behaviour) or above the Functions.

Jos

Edited April 5, 2014 by Jos

[FaridAgl]

Oops, I was looking for something else, it's OK now.

And did I said the Au3Stripper is great? If no, let me say, that's just great.

Thanks.

[mLipok]

http://www.autoitscript.com/autoit3/scite/docs/Au3Stripper.html

http://www.autoitscript.com/autoit3/scite/docs/SciTE4AutoIt3---keyboard-shortcuts.html

http://www.autoitscript.com/autoit3/scite/docs/LUA/manual.html

http://www.autoitscript.com/autoit3/scite/docs/lua/SciTE-LUAInterface.html

404 Not Found

 

EDIT:

and

http://www.autoitscript.com/autoit3/scite/docs/SciTEDocumentation.html

is blank/empty

 

Edit 2:

There is still:

http://www.autoitscript.com/autoit3/scite/docs/Obfuscator.html

on the "tree"

 

Edit 3:

http://www.autoitscript.com/autoit3/scite/docs/SciTE4AutoIt3.html

there is no info about: "User Options File" (this is/exists on the "tree")

 

ps.

I checked all the help in terms of news.
By the way, I found these few above-described problems.

Edited April 5, 2014 by mLipok

[mLipok]

After instaling SciTE4AuotIt there is info about using CTRL+F1 (to read how to use SciTE)

Unfortunately.

This shortcut is a reserverd for Windows 7 to run/call a first icon on taskbar.

[Jos]

After instaling SciTE4AuotIt there is info about using CTRL+F1 (to read how to use SciTE)

Unfortunately.

This shortcut is a reserverd for Windows 7 to run/call a first icon on taskbar.

Works fine on my Windows7

Jos

[mLipok]

oh.. I see

Yesterday I worked with WIN+1, and  WIN+2 ...
Today I used the aforementioned, CTRL + F1 and it launched a program from Taskbar icons.
But I have found the cause - and it is not the default behavior of Windows.

Sorry for the confusion.

edit: typo

Edited April 5, 2014 by mLipok

[Jos]

ps.

I checked all the help in terms of news.

By the way, I found these few above-described problems.

I haven't spent time yet on properly updating the website docs other than copying all files.

The Website is case sensitive which causes some issues.

Jos

[mLipok]

All right.
I understand.

I have a few other observations, report them here or on the track ?
Or maybe better to wait until both versions (HelpFile and Online Help) will be harmonized ?

[mLipok]

And by the way if there is a tool for mass changes from the old directives (Obfuscator) to new (Au3Stripper).

I just started to compare them and wonder about taking a script that would introduce changes in all my projects, but I wonder if someone could have such a solution, already did.

[guinness]

And by the way if there is a tool for mass changes from the old directives (Obfuscator) to new (Au3Stripper).

I just started to compare them and wonder about taking a script that would introduce changes in all my projects, but I wonder if someone could have such a solution, already did.

I thought about adding something to AutoItWrapperToPragma, but you're free to create something if you want.

[mLipok]

REPRO Test_Stripper.au3:

; comment1

#AutoIt3Wrapper_Run_Au3Stripper=Y
#Au3Stripper_Parameters=/MO
#include <MsgBoxConstants.au3>

;~ comment2
#cs
    comment3
#CE
#comments-start
    comment4
#comments-end

MsgBox($MB_SYSTEMMODAL, 'test', 'some test')

Why Test_Stripper_stripped.au3

contain:

; comment1

#AutoIt3Wrapper_Run_Au3Stripper=Y
#Au3Stripper_Parameters=/MO
#include <MsgBoxConstants.au3>

;~ comment2
#cs
    comment3
#CE
#comments-start
    comment4
#comments-end

MsgBox($MB_SYSTEMMODAL, 'test', 'some test')

Why its still contain Comments and directives ?

[Jos]

This is a bug in AU3Stripper. Will be fixed in the next Beta available later today.

Thanks

Jos

[mLipok]

Waiting with curiosity.

Best regards.
mLipok

[Jos]

It's available in the Beta directory. Give it a try and see if the fixes it for you.

Jos

[mLipok]

It seems that everything is now OK.

mLipok

edit:

I test only /MO option

Edited April 7, 2014 by mLipok