HeavenlyDemon Posted February 6, 2013 Share Posted February 6, 2013 (edited) $Form1 = GUICreate("", 195, 137, 192, 124) $Checkbox1 = GUICtrlCreateCheckbox("Save UserName", 48, 88, 97, 17) $Checkbox2 = GUICtrlCreateCheckbox("Save Password", 48, 104, 97, 17) GUISetState(@SW_SHOW) While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $Button1 $check = GUICtrlGetState($Checkbox1) MsgBox(0, "", $check) EndSwitch WEnd EndFunc is GuiCtrlGetState not suposed to return the state of the controler ? $GUI_CHECKED, $GUI_ENABLED .... i get number (checked or unchecked) i get 80 ?!?!? what is that ? Edited February 6, 2013 by HeavenlyDemon Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 6, 2013 Moderators Share Posted February 6, 2013 HeavenlyDemon,GUICtrlGetState returns the overall state of the control - which could well be a combination of several states (i.e checked and disabled). If you want to check for a specific state then you need to use BitAND like this:; Is it checked? If BitAND(GUICtrlGetState($Checkbox1), $GUI_CHECKED) = $GUI_CHECKED Then ; It is checked Else ; It is NOT checked EndIfThis works as the states are carefully defined so that they only affect single bits. The same is true for styles - look at the Setting Styles tutorial in the Wiki for more information on this. All clear? M23 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
HeavenlyDemon Posted February 6, 2013 Author Share Posted February 6, 2013 If BitAND(GUICtrlGetState($Checkbox1), $GUI_CHECKED) = $GUI_CHECKED Then MsgBox(0, "Status", "Checkbox is checked") Else MsgBox(0, "Status", "Checkbox is unchecked") EndIf Checked or Unchecked i get Msg unchecked Link to comment Share on other sites More sharing options...
Moderators Melba23 Posted February 6, 2013 Moderators Share Posted February 6, 2013 HeavenlyDemon,Ah sorry, for Checkbox and Radio controls I just remembered that you need to use GUICtrlRead. #include <GUIConstantsEx.au3> $hGUI = GUICreate("Test", 500, 500) $cCheck = GUICtrlCreateCheckbox(" Test", 10, 10, 200, 20) $cButton = GUICtrlCreateButton("Read State", 10, 100, 80, 30) GUISetState() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE Exit Case $cButton ConsoleWrite(GUICtrlRead($cCheck) & @CRLF) If BitAND(GUICtrlRead($cCheck), $GUI_CHECKED) Then MsgBox(0, "Hi", "Checked") Else MsgBox(0, "Hi", "NOT Checked") EndIf EndSwitch WEndI posted about it in this thread and GEOSoft offered a possible explanation of why this is the case. M23 xedaxy 1 Any of my own code posted anywhere on the forum is available for use by others without any restriction of any kind Open spoiler to see my UDFs: Spoiler ArrayMultiColSort ---- Sort arrays on multiple columnsChooseFileFolder ---- Single and multiple selections from specified path treeview listingDate_Time_Convert -- Easily convert date/time formats, including the language usedExtMsgBox --------- A highly customisable replacement for MsgBoxGUIExtender -------- Extend and retract multiple sections within a GUIGUIFrame ---------- Subdivide GUIs into many adjustable framesGUIListViewEx ------- Insert, delete, move, drag, sort, edit and colour ListView itemsGUITreeViewEx ------ Check/clear parent and child checkboxes in a TreeViewMarquee ----------- Scrolling tickertape GUIsNoFocusLines ------- Remove the dotted focus lines from buttons, sliders, radios and checkboxesNotify ------------- Small notifications on the edge of the displayScrollbars ----------Automatically sized scrollbars with a single commandStringSize ---------- Automatically size controls to fit textToast -------------- Small GUIs which pop out of the notification area Link to comment Share on other sites More sharing options...
HeavenlyDemon Posted February 6, 2013 Author Share Posted February 6, 2013 np works now...ty for help Link to comment Share on other sites More sharing options...
guinness Posted February 6, 2013 Share Posted February 6, 2013 Note the return table in GUICtrlRead. It is a tricky one as I used to make the same assumption as you did about GUICtrlGetState and checkboxes. GUICtrlRead UDF List: _AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples... Updated: 22/04/2018 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now