jaberwacky Posted May 31, 2012 Author Share Posted May 31, 2012 Latest update allows you to enable and disable tools which you may have defined in SciTEUser.properties! Plus some bug fixes Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Spiff59 Posted May 31, 2012 Share Posted May 31, 2012 (edited) If you're open to suggestions... I think that, logically, the highest-order settings are those on the SciTE4AutoIt3 tab and that would make better sense as the first tab. On that tab, probably the highest-level setting is the "Loaded AutoIt3 Definitions" which might be better at the top since all the other settings on that tab, and all other tabs, are dependant upon that. Maybe park a mode label to the right of the tabs so no matter what tab you're viewing you'll know whether you are modifying the PROD or BETA definitions? Maybe the prod/beta setting would be better as radios at the top of the window and outside of any tab? Edit: To word it differently: Since there are 2 sets of config files, and this program only edits one or the other at a time, that makes the prod/beta setting hierarchically the highest-level setting in the program and it probably shouldn't be buried half-way down on the fourth tab. I think it logically deserves much more emphasis. (I'm not picking on this version, SciTEConfig doesn't make the prod/beta setting stand out either) Edited May 31, 2012 by Spiff59 Link to comment Share on other sites More sharing options...
jaberwacky Posted June 1, 2012 Author Share Posted June 1, 2012 I'm definitely happy to receive suggestions, changes, addition, etc. Keep 'em comin'.As for one of your suggestions try this beta and tell me what you think. Then we'll go from there: SciTE Customization GUI - beta Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Spiff59 Posted June 1, 2012 Share Posted June 1, 2012 I think that's a definite improvement. People who are unaware that there are two separate config files, and that they are only editing one of them, will at least have something to tip them off to that fact. Thanks. Link to comment Share on other sites More sharing options...
jaberwacky Posted July 20, 2012 Author Share Posted July 20, 2012 Latest update! See OP. Skitty 1 Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Skitty Posted July 20, 2012 Share Posted July 20, 2012 one thing, sometimes when resizing, the app UI will not resize correctly. The tabs will have a huge space above and will not allow to scroll down, this happens when I maximize the app and then restore its position. Link to comment Share on other sites More sharing options...
jaberwacky Posted July 20, 2012 Author Share Posted July 20, 2012 Thanks for the report. Updated! Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
jaberwacky Posted November 10, 2012 Author Share Posted November 10, 2012 Latest update sees the best stability so far and a lot of neat features. Check it out! Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
burnell Posted February 15, 2013 Share Posted February 15, 2013 Hi jaberwocky, nice tool. An option in SciTE4AutoIt3-tab to choose a userdefined icon and inputfields for compile, /w otionos, run, edit, tidy to translate the contextmenus for anyone would be great. Link to comment Share on other sites More sharing options...
jaberwacky Posted February 17, 2013 Author Share Posted February 17, 2013 I'm not sure I understand. Could you expand on this please? Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
burnell Posted February 18, 2013 Share Posted February 18, 2013 See my picture... Link to comment Share on other sites More sharing options...
Developers Jos Posted February 18, 2013 Developers Share Posted February 18, 2013 See my picture... That looks a lot like the Autoit3Wrapper GUI options ... not really used for SciTE configuration. SciTE4AutoIt3 Full installer Download page - Beta files Read before posting How to post scriptsource Forum etiquette Forum Rules Live for the present, Dream of the future, Learn from the past. Link to comment Share on other sites More sharing options...
jaberwacky Posted February 19, 2013 Author Share Posted February 19, 2013 Good point. I guess I should consider removing those check boxes altogether. Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
burnell Posted February 21, 2013 Share Posted February 21, 2013 if i would like to config SciTE context menu, i would look first in SciTE config ... Link to comment Share on other sites More sharing options...
jaberwacky Posted March 29, 2013 Author Share Posted March 29, 2013 Latest update! Includes multiple bug fixes and three new themes! See OP. Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
jaberwacky Posted May 8, 2013 Author Share Posted May 8, 2013 UPDATED! See OP for more details. Several things have changed. Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
guinness Posted May 8, 2013 Share Posted May 8, 2013 I now read and write the SciTEUSer.config files with the INI functionsReally! I'm surprised that it works. UDF List: _AdapterConnections() • _AlwaysRun() • _AppMon() • _AppMonEx() • _ArrayFilter/_ArrayReduce • _BinaryBin() • _CheckMsgBox() • _CmdLineRaw() • _ContextMenu() • _ConvertLHWebColor()/_ConvertSHWebColor() • _DesktopDimensions() • _DisplayPassword() • _DotNet_Load()/_DotNet_Unload() • _Fibonacci() • _FileCompare() • _FileCompareContents() • _FileNameByHandle() • _FilePrefix/SRE() • _FindInFile() • _GetBackgroundColor()/_SetBackgroundColor() • _GetConrolID() • _GetCtrlClass() • _GetDirectoryFormat() • _GetDriveMediaType() • _GetFilename()/_GetFilenameExt() • _GetHardwareID() • _GetIP() • _GetIP_Country() • _GetOSLanguage() • _GetSavedSource() • _GetStringSize() • _GetSystemPaths() • _GetURLImage() • _GIFImage() • _GoogleWeather() • _GUICtrlCreateGroup() • _GUICtrlListBox_CreateArray() • _GUICtrlListView_CreateArray() • _GUICtrlListView_SaveCSV() • _GUICtrlListView_SaveHTML() • _GUICtrlListView_SaveTxt() • _GUICtrlListView_SaveXML() • _GUICtrlMenu_Recent() • _GUICtrlMenu_SetItemImage() • _GUICtrlTreeView_CreateArray() • _GUIDisable() • _GUIImageList_SetIconFromHandle() • _GUIRegisterMsg() • _GUISetIcon() • _Icon_Clear()/_Icon_Set() • _IdleTime() • _InetGet() • _InetGetGUI() • _InetGetProgress() • _IPDetails() • _IsFileOlder() • _IsGUID() • _IsHex() • _IsPalindrome() • _IsRegKey() • _IsStringRegExp() • _IsSystemDrive() • _IsUPX() • _IsValidType() • _IsWebColor() • _Language() • _Log() • _MicrosoftInternetConnectivity() • _MSDNDataType() • _PathFull/GetRelative/Split() • _PathSplitEx() • _PrintFromArray() • _ProgressSetMarquee() • _ReDim() • _RockPaperScissors()/_RockPaperScissorsLizardSpock() • _ScrollingCredits • _SelfDelete() • _SelfRename() • _SelfUpdate() • _SendTo() • _ShellAll() • _ShellFile() • _ShellFolder() • _SingletonHWID() • _SingletonPID() • _Startup() • _StringCompact() • _StringIsValid() • _StringRegExpMetaCharacters() • _StringReplaceWholeWord() • _StringStripChars() • _Temperature() • _TrialPeriod() • _UKToUSDate()/_USToUKDate() • _WinAPI_Create_CTL_CODE() • _WinAPI_CreateGUID() • _WMIDateStringToDate()/_DateToWMIDateString() • Au3 script parsing • AutoIt Search • AutoIt3 Portable • AutoIt3WrapperToPragma • AutoItWinGetTitle()/AutoItWinSetTitle() • Coding • DirToHTML5 • FileInstallr • FileReadLastChars() • GeoIP database • GUI - Only Close Button • GUI Examples • GUICtrlDeleteImage() • GUICtrlGetBkColor() • GUICtrlGetStyle() • GUIEvents • GUIGetBkColor() • Int_Parse() & Int_TryParse() • IsISBN() • LockFile() • Mapping CtrlIDs • OOP in AutoIt • ParseHeadersToSciTE() • PasswordValid • PasteBin • Posts Per Day • PreExpand • Protect Globals • Queue() • Resource Update • ResourcesEx • SciTE Jump • Settings INI • SHELLHOOK • Shunting-Yard • Signature Creator • Stack() • Stopwatch() • StringAddLF()/StringStripLF() • StringEOLToCRLF() • VSCROLL • WM_COPYDATA • More Examples... Updated: 22/04/2018 Link to comment Share on other sites More sharing options...
BrewManNH Posted May 9, 2013 Share Posted May 9, 2013 I can see how that would work, anything that is in the file that Scite doesn't understand, like the section headers, it probably ignores, the rest of the .properties files are just key=value pairs. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
UEZ Posted May 9, 2013 Share Posted May 9, 2013 (edited) I get errors when starting the exe. 1) Line 23636 (File "..SciTE Customization GUI.exe"): Error: Array variable has incorrect number of subscripts or subscript dimension range exceeded. 2) ============================================= ! AutoItCOM Test: We intercepted a COM error! (-1) : Member not found. ============================================= OS: Win7 x64. Br, UEZ Edited May 9, 2013 by UEZ Please don't send me any personal message and ask for support! I will not reply! Selection of finest graphical examples at Codepen.io The own fart smells best! ✌Her 'sikim hıyar' diyene bir avuç tuz alıp koşma!¯\_(ツ)_/¯ ٩(●̮̮̃•̃)۶ ٩(-̮̮̃-̃)۶ૐ Link to comment Share on other sites More sharing options...
jaberwacky Posted May 9, 2013 Author Share Posted May 9, 2013 (edited) Really! I'm surprised that it works.I hope it isn't one of things that will break with future AutoIt releases.I get errors when starting the exe.Thanks for the bug report! Would you believe that time bomb did not go off until you mentioned it! Twenty-one downloads until you reported. Thank you very much. Edited May 9, 2013 by jaberwocky6669 Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now