Popular Post jaberwacky Posted March 12, 2012 Popular Post Share Posted March 12, 2012 (edited) SciTE Customization GUI is intended to be your one-stop solution for your SciTE customization needs. With SciTE Customization GUI you can create new themes from scratch without having to touch a single configuration file. Simply select 'Default Theme' from the file menu. This will start you out with a default theme. Then make your changes to the theme. Finally, select 'Save As' from the file menu and give it a name. Or you can select from an already existing theme. You can see live changes to SciTE as you change things around (some settings are not live). You can change various SciTE4AutoIt3 settings such as Tidy, Tools, debug trace messages, etc. I mostly want to try out new ideas which I hope will get used in the official SciTE4AutoIt3. I also wanted to see how large of a program I could script in AutoIt before it become a mass of unmaintable spaghetti. I feel that I am successful in that regard. It is reasonably easy to debug, extend and understand. I feel that this was achieved by employing the Model-View-Controller pattern. I also used AutoItObject which allows me to achieve a level of information hiding which would not have been possible otherwise. I stand on the shoulders of giants so credit where credit is due. Thanks to Jos for the original SciTEConfig. Thanks to Jon for AutoIt. Melba23 for the SciTE Abbreviation Manager and the SciTE UserCalltip Manager. Credits and changelog have be moved to the script. Note: this is not an official script. Jon, Jos or the rest of the AutoIt team do not provide support. That's all up to me. SciTE Customization GUI.zip -- downloads: ~5253 SciTE Customization GUI -- Source.zip -- Includes all of the required dependencies. Edited March 5, 2017 by jaberwacky New version guner7, UEZ, jimmy123j and 3 others 5 1 Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
BrewManNH Posted March 12, 2012 Share Posted March 12, 2012 I believe there's something missing from this post. zoel 1 If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
jaberwacky Posted March 12, 2012 Author Share Posted March 12, 2012 Yup, lol! Fixed. Thanks! Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
BrewManNH Posted March 12, 2012 Share Posted March 12, 2012 Doesn't work with a non-installed (portable) version of SciTe because it's reading from the registry instead of looking for the environment variable SCITE_Home first. I'll have to try it on my home computer to see how it works, I have it installed there, but can't test on my company computer because AutoIt isn't installed on it, using it from a thumb drive. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
Developers Jos Posted March 12, 2012 Developers Share Posted March 12, 2012 (edited) I am fine with people creating more extensive SciTEConfig setups, but just as a pre-warning: I have been making quite some changes to SciTEConfig to avoid the need of updating au3.properties and all changes will now be saved into SciTEUSer.properties (where it belongs). This all will ensure that whenever you upgrade the SciTE4AutoIt3 package, the updates made will stay and you don't require Admin level anymore to make the changes, except for the File Open setting change in the registry. By the way: It is looking nice. Jos Edited March 12, 2012 by Jos SciTE4AutoIt3 Full installer Download page - Beta files Read before posting How to post scriptsource Forum etiquette Forum Rules Live for the present, Dream of the future, Learn from the past. Link to comment Share on other sites More sharing options...
jaberwacky Posted March 12, 2012 Author Share Posted March 12, 2012 I have been making quite some changes to SciTEConfig to avoid the need of updating au3.properties and all changes will now be saved into SciTEUSer.properties.By the way: It is looking nice.One step ahead of you.Thanks!@BrewmanNH, I'll see what I can do to address those issues. Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Skitty Posted March 20, 2012 Share Posted March 20, 2012 (edited) Awesome! only one problem :SWhen I ran the compiled binary under SciTE4AutoIt3 (v2.28) and changed the tidy parameters default to white spaces instead of tab delimiters under SciTE , leaving all the defaults your script had and not touching anything else, I pressed update and got this. Is this expected behavior?Edit: Oh, never mind, I see what's going on now, I hadn't noticed its defaults are set to disable all the 3rd party tools, you just have to check them and click update, my bad! Edited March 20, 2012 by THAT1ANONYMOUSEDUDE Link to comment Share on other sites More sharing options...
jaberwacky Posted March 20, 2012 Author Share Posted March 20, 2012 (edited) I don't understand. If it's a bug I want to work on it for sure. It shouldn't disable any tools by default. Edited March 20, 2012 by LaCastiglione Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Skitty Posted March 20, 2012 Share Posted March 20, 2012 I don't understand. If it's a bug I want to work on it for sure. It shouldn't disable any tools by default.Doesn't seem like it, I had just assumed the tool would detect active tool entries and set them to checked under the tools tab, and when I updated the config, I wasn't expecting it to disable all the tools, but as I noticed, it doesn't seem to detect a users current tool configuration and you have to set it manually when first run as it seems. After first run It does detect what tools a user has after it sets them itself, I guess it has something to do with "SciteTools.ini", which came with the download which has all the tools disabled by default.Works great btw. Link to comment Share on other sites More sharing options...
Skitty Posted March 20, 2012 Share Posted March 20, 2012 Ok, problem detected! when I updated the configuration for what tools will appear in the "Tools" menu area, I disabled "Make UDF header", when I re-enable the tool selection, I get an error in the scite console. C:Program FilesAutoIt3SciTELuaTools.lua:73: Tool "AutoItTools.InsertUDFHeader" not found. >Lua: error occurred while processing command Link to comment Share on other sites More sharing options...
jaberwacky Posted March 20, 2012 Author Share Posted March 20, 2012 But it worked before? Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Skitty Posted March 20, 2012 Share Posted March 20, 2012 (edited) yep yep, even reinstalled scite a few times to see if it would do it again, and it did, I couldn't figure out what was happening though :/Edit: Forgot to mention I'm using windows 7 x86 if it's of any relevance. Edited March 22, 2012 by THAT1ANONYMOUSEDUDE Link to comment Share on other sites More sharing options...
jaberwacky Posted March 22, 2012 Author Share Posted March 22, 2012 This is what I see when I try it from a new installation: Function or struct definition not found, unable to insert header. Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Skitty Posted April 13, 2012 Share Posted April 13, 2012 It seems to work flawlessly on my system now, I see that you even have it detect what tools are active now as well? I'd say this is a very suitable contender for the current scite config tool distributed with the autoit installation, I wouldn't mind seeing this as a tool option under tools. Feature Request: add an option to replace the current scite config tool, this thing is too robust in features not to consider doing so, wouldn't you say? Sadly, I believe it hasn't gotten the attention it deserves, I would say jos should consider replacing the current scite config with this, I mean why not? It has everything it scite config has and more. I'd also like to mention that you should consider making the gui resizable and wider instead of taller, it's not fitting into the screen on my laptop, which I use a lot and I can only see a portion of the contents in the gui unless I attach it to a monitor. Link to comment Share on other sites More sharing options...
jaberwacky Posted April 13, 2012 Author Share Posted April 13, 2012 It seems to work flawlessly on my system now, I see that you even have it detect what tools are active now as well? I'd say this is a very suitable contender for the current scite config tool distributed with the autoit installation, I wouldn't mind seeing this as a tool option under tools.Feature Request: add an option to replace the current scite config tool, this thing is too robust in features not to consider doing so, wouldn't you say?Sadly, I believe it hasn't gotten the attention it deserves, I would say jos should consider replacing the current scite config with this, I mean why not? It has everything it scite config has and more.I'd also like to mention that you should consider making the gui resizable and wider instead of taller, it's not fitting into the screen on my laptop, which I use a lot and I can only see a portion of the contents in the gui unless I attach it to a monitor.Thanks for the positive words! I haven't done anything with the Tools stuff. Nice to know I don't have to now. LOL! I wouldn't want to have to officially maintain this monster. Have you seen the source?It used to be resizeable, so I guess I'll go back to that. It's should just be a matter of uncommenting a few lines. Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Skitty Posted April 13, 2012 Share Posted April 13, 2012 Thanks for the positive words! I haven't done anything with the Tools stuff. Nice to know I don't have to now. LOL!I wouldn't want to have to officially maintain this monster. Have you seen the source?It used to be resizeable, so I guess I'll go back to that. It's should just be a matter of uncommenting a few lines.Hmm, interesting... I remember the last time I tried it, any modifications to the tools options would render the "Make UDF header" option inoperable, but it's not doing it anymore..I've re-installed different versions of autoit since that time, so who knows what might be at play there.. And yeah, I saw the source, turned 360 degrees and walked away, I hate the objects syntax, it's confusing as hell! Link to comment Share on other sites More sharing options...
wraithdu Posted April 13, 2012 Share Posted April 13, 2012 (edited) Played real quick, seem to have found some problems. 1) First two tabs, changing options does not enable the Update button. 2) First two tabs, reload does not refresh / reset the options. 3) Theme tab, not recognizing the current font. Edit2: #3 seems to be that you're not picking up both the base font and monospace font, and which is actually active. It would also be nice to import user themes from the standard location, <scitedir>SciteConfig. I'm running Win7 x64, SciTE v3.0.4. Edit: You should also check for user defined Tools in the user properties file (that's where I keep mine). Edited April 13, 2012 by wraithdu Link to comment Share on other sites More sharing options...
jaberwacky Posted April 21, 2012 Author Share Posted April 21, 2012 1) First two tabs, changing options does not enable the Update button.2) First two tabs, reload does not refresh / reset the options.3) Theme tab, not recognizing the current font.Edit2:#3 seems to be that you're not picking up both the base font and monospace font, and which is actually active.It would also be nice to import user themes from the standard location, <scitedir>SciteConfig.Edit:You should also check for user defined Tools in the user properties file (that's where I keep mine).I think I have everything so far except for importing user themes from standard location. Please run again to see if that corrects the issues so far. Thank you. Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
BrewManNH Posted April 24, 2012 Share Posted April 24, 2012 I'm getting a lot of errors when using this on Windows 7 x64.=============================================! AutoItCOM Test: We intercepted a COM error!windescription: Member not found.(-1) :=============================================This happens when starting and when trying to update the properties file.BTW, using this on a portable version of SciTE/AutoIt. If I posted any code, assume that code was written using the latest release version unless stated otherwise. Also, if it doesn't work on XP I can't help with that because I don't have access to XP, and I'm not going to.Give a programmer the correct code and he can do his work for a day. Teach a programmer to debug and he can do his work for a lifetime - by Chirag GudeHow to ask questions the smart way! I hereby grant any person the right to use any code I post, that I am the original author of, on the autoitscript.com forums, unless I've specifically stated otherwise in the code or the thread post. If you do use my code all I ask, as a courtesy, is to make note of where you got it from. Back up and restore Windows user files _Array.au3 - Modified array functions that include support for 2D arrays. - ColorChooser - An add-on for SciTE that pops up a color dialog so you can select and paste a color code into a script. - Customizable Splashscreen GUI w/Progress Bar - Create a custom "splash screen" GUI with a progress bar and custom label. - _FileGetProperty - Retrieve the properties of a file - SciTE Toolbar - A toolbar demo for use with the SciTE editor - GUIRegisterMsg demo - Demo script to show how to use the Windows messages to interact with controls and your GUI. - Latin Square password generator Link to comment Share on other sites More sharing options...
jaberwacky Posted April 24, 2012 Author Share Posted April 24, 2012 (edited) You put the script into your scite directory too?I just replicated the problem. Thanks for the report! Edited April 24, 2012 by LaCastiglione Helpful Posts and Websites: AutoIt3 Variables and Function Parameters MHz | AutoIt Wiki | Using the GUIToolTip UDF BrewManNH | Can't find what you're looking for on the Forum? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now