Windows and Office key

urie · August 28, 2011

Thats the issue lots that we get have damaged / unreadable labels and no restore discs so a way to get the right key would be real usefull

Some info

Definition of OEM:

The term, OEM (original equipment manufacturer) refers to companies that make products for others to repackage and sell. Resellers buy OEM products in bulk, minus the costly retail packaging that comes with individually sold units. The product itself is essentially the same as its more expensive, retail-packaged sibling. OEM products are used in many industries, but are perhaps most prevalent in electronics.

Generally, dealers of OEM products add something of value before reselling the merchandise. An OEM vendor that does this is known as a "value added reseller" (VAR). A VAR might build components, sub-systems, or systems from quality OEM parts. OEM goods allow VARs a wide range of creative marketing choices, which permits smaller dealers to be competitive in the marketplace.

OEM software will have different product numbers than retail packages, and support may be provided by the VAR, rather than the maker of the software. Functionally, OEM and retail versions of software should be essentially the same.

Two kinds of OEM Product Keys:

OEM SLP Keys:

* OEM SLP (System-Locked Pre-installation) keys are only issued to the big manufacturers such as Dell, Asus, Sony, etc.

* These are the only keys that are able to bypass activation that is, perform offline activation without contacting Microsoft.

* They will work with any OEM SLP system, regardless of the OEM system's brand i.e. Product Keys are not brand specific.

OEM NONSLP Keys:

* Similar to Retail, but distributed and supported by an OEM. Needs activation by phone or online and they are not brand specific. .

OEM COA Keys:

* OEM COA keys (Certificate of Authentication) are regular OEM keys that require activation, either by phone or online and they are not brand specific.

(you will find the sticker with the key underneath you Laptop or on the side of you PC)

* These keys will work in general same as Retail or Upgrade keys and can be used only once.

OEM SLP Product Keys activation:

* You need is an OEM SLP Product Key that matches the version of Windows Vista you have installed or are going to install.

(Home Basic, Home Premium, Business or Ultimate), plus the OEM certificate matching the SLIC table

* The OEM SLP Product Key does not have to match the OEM-brand certificate nor the OEM-brand BIOS ACPI_SLIC information.

(The only ones that need to match are the OEM-brand certificate and the OEM-brand BIOS ACPI_SLIC information.)

* SLP activation doesn't work with Vista Release Candidates or Vista Beta versions. Only the final version (RTM, Retail or OEM).

i.e.: A+B+C = Vista Activated Offline

OEM SLP Key + OEM Certificate + Full SLIC Table = Vista Activated Offline

If one (A,B or C) is missing, activation will fail!

Nunos · August 28, 2011

Thank you Valuater for the explanation and example :mellow:

And thank you to the creators of this script it works great here on WIndows 7 Business (x86) and (x64).

NDog · September 12, 2011

I'm using this on fresh Windows 7 Professional SP1 MAK activated. Windows Key returns BBBBB-BBBBB-BBBBB-BBBBB-BBBBB and the Windows Default key returns HYF8J-CVRMY-...., which is the default microsoft key you can use for 31 days trial. Im writing a script to backup the token and use for offline reactivation on machines in some of my sites for reimaging purposes. (proxy stuff is a headache)

Has anyone else here had success with this and Windows 7 Pro MAK activated? If it is not possible then I will have to embed the key for each site into the autoit script and compile an exe for each site (not secure) or backup the registy key section for each machine (untested but may work). I prefer to return Windows Key, but then if that is not possible I have to work around that.....

JFX · September 13, 2011

Sorry MAK can't be recovered with this script. unsure where and how key is stored in MAK activation.

Chimaera · October 10, 2011

I'm curious can this be altered to read a drive plugged in and external drive?

On another program ive used it had a load hive option and you gave the external drive location and the windows folder and it read the key from that

Common scenario for us licence key is worn so not usable, hard drive wont boot OS so cant recover that way, but drive is accessible in a caddy/external drive so reading the hive that way would be very usefull sometimes to get the key back.

I don't know much about registry so i wouldn't know how to proceed loading another registry hive.

Any thoughts?

EDIT found this, not sure if it helps though as this is doing it manually

Load the hive.
To load Local_machine hive,
Open regedit > Click "HKEY_LOCAL_MACHINE"
File > Load Hive > Browse to the file
Give it a name > then do what yoy want to do with it
Click on the loaded hive > File > Unload Hive

To load a Users hive,
Open regedit > Click "HKEY_USERS"
File > Load Hive > Browse to the file
Give it a name > then do what yoy want to do with it
Click on the loaded hive > File > Unload Hive

Edited October 10, 2011 by Chimaera

storme · October 11, 2011

On another program ive used it had a load hive option and you gave the external drive location and the windows folder and it read the key from that

Common scenario for us licence key is worn so not usable, hard drive wont boot OS so cant recover that way, but drive is accessible in a caddy/external drive so reading the hive that way would be very usefull sometimes to get the key back.
I don't know much about registry so i wouldn't know how to proceed loading another registry hive.

Any thoughts?

I load an OLD program called ERUNT onto all my computers (works on XP to Win7).

It backs up the registry and even leaves a restore program in each of backup folders.

One little trouble is UAC stops it working completly (i.e NO UAC Prompts at all just an error from ERUNT)

In your scenario you would boot with a winpe or similar, run the restore program in the directory of the most recent backup and you have the registry back in place. It's saved a lot of my systems from being reinstalled for a simple registry glitch. :graduated:

Hope you have a great day!

John Morrison

Chimaera · October 11, 2011

The problem for me atm is i cant boot the pc at all the drive is that twitchy, but if you chuck it in a caddy a different system OS is able to access the drive albeit not very well.

I just wondered if it was possible to have the ability to point to the registry hive on the damaged drive using the different OS and get the key from the damaged drive using the earlier code.

Well i know its possible, its just how.

Edited October 11, 2011 by Chimaera

storme · October 11, 2011

The problem for me atm is i cant boot the pc at all the drive is that twitchy, but if you chuck it in a caddy a different system OS is able to access the

Sorry I missed that it was a current problem :graduated: well maybe for next time Erunt can help.

You can use REGEDT32 to mount external registry (I've never done it myself, but here is what i've found)

(File -> Load Hive Check the help file for full details.

User registry HKEY_CURRENT_USER c:\documents and settings\{username}\NTUSER.DAT

Other registry \windows\system32\config\????.data

Good Luck

John Morrison

Chimaera · October 11, 2011

similar to my edit here

Im afraid Erunt wont help m8 because customers never bring the machines in until it has gone pear shaped and then as we know its tooo late

JFX · October 11, 2011

Try this to retrieve key from an offline windows

#include <Array.au3>
 
;Local Windows
;~ $keys = _DecodeProductKeys()
 
;Offline Windows
$var = FileSelectFolder("Choose an offline Windows folder.", "")
If @error Then Exit
 
$keys = _DecodeProductKeys($var)
 
If @error Then
MsgBox(16, 'Error', $keys)
Else
_ArrayDisplay($keys, "Retrieved Windows Keys")
EndIf
 
 
 
 
Func _DecodeProductKeys($Offline = False)
Local $Array[9][2], $BinaryDPID, $KeyPos = 0x34 * 2 + 3, $RegKey, $i, $var, $unLoadHive = 0, $OSArch
 
IF Not $Offline Then
$Software = 'SOFTWARE'
$OSArch = @OSArch
Else
IF Not FileExists($Offline & '\system32\config\software') Then Return SetError(1, 0, 'Offline Windows invalid!')
IF (ShellExecuteWait('reg', 'load HKLM\_Off_SOFTWARE ' & $Offline & '\system32\config\software', '', '', @SW_HIDE)) = 0 Then
$unLoadHive = 1
Else
Return SetError(2, 0, 'Could not load Offline Windows registry!')
EndIf
$Software = '_Off_SOFTWARE'
IF FileExists($Offline & '\syswow64\kernel32.dll') Then $OSArch = 'x64'
EndIf
 
$Array[0][0] = 'Windows Key'
$BinaryDPID = RegRead('HKLM64\'& $Software &'\Microsoft\Windows NT\CurrentVersion', 'DigitalProductId')
$Array[0][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))
 
 
$Array[1][0] = 'Windows Key 4'
$BinaryDPID = RegRead('HKLM64\'& $Software &'\Microsoft\Windows NT\CurrentVersion', 'DigitalProductId4')
$Array[1][1] = _Base24_Decode(StringMid($BinaryDPID, 0x328 * 2 + 3))
 
 
$Array[2][0] = 'Windows Default'
$BinaryDPID = RegRead('HKLM64\'& $Software &'\Microsoft\Windows NT\CurrentVersion\DefaultProductKey', 'DigitalProductId')
$Array[2][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))
 
 
$Array[3][0] = 'Windows Default 4'
$BinaryDPID = RegRead('HKLM64\'& $Software &'\Microsoft\Windows NT\CurrentVersion\DefaultProductKey', 'DigitalProductId4')
$Array[3][1] = _Base24_Decode(StringMid($BinaryDPID, 0x328 * 2 + 3))
 
 
 
$Array[4][0] = 'Office XP Key'
$RegKey = 'HKLM\'& $Software &'\Microsoft\Office\10.0\Registration'
IF $OSArch = 'x64' Then $RegKey = 'HKLM64\'& $Software &'\Wow6432Node\Microsoft\Office\10.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[4][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))
 
 
$Array[5][0] = 'Office 2003 Key'
$RegKey = 'HKLM\'& $Software &'\Microsoft\Office\11.0\Registration'
IF $OSArch = 'x64' Then $RegKey = 'HKLM64\'& $Software &'\Wow6432Node\Microsoft\Office\11.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[5][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))
 
 
$Array[6][0] = 'Office 2007 Key'
$RegKey = 'HKLM\'& $Software &'\Microsoft\Office\12.0\Registration'
IF $OSArch = 'x64' Then $RegKey = 'HKLM64\'& $Software &'\Wow6432Node\Microsoft\Office\12.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[6][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))
 
 
$Array[7][0] = 'Office 2010 x86 Key'
$RegKey = 'HKLM\'& $Software &'\Microsoft\Office\14.0\Registration'
IF $OSArch = 'x64' Then $RegKey = 'HKLM64\'& $Software &'\Wow6432Node\Microsoft\Office\14.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[7][1] = _Base24_Decode(StringMid($BinaryDPID, 0x328 * 2 + 3))
 
 
$Array[8][0] = 'Office 2010 x64 Key'
$RegKey = 'HKLM64\'& $Software &'\Microsoft\Office\14.0\Registration'
IF $OSArch = 'x64' Then $RegKey = ''
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[8][1] = _Base24_Decode(StringMid($BinaryDPID, 0x328 * 2 + 3))
 
 
IF $unLoadHive Then ShellExecuteWait('reg', 'unload HKLM\_Off_SOFTWARE', '', '', @SW_HIDE)
 
Return $Array
 
EndFunc
 
 
 
Func _Base24_Decode($BinaryDPID)
 
Local $bKey[15], $sKey[29], $Digits[24], $Value = 0, $hi = 0, $n = 0, $i = 0, $dlen = 29, $slen = 15, $Result
$Digits = StringSplit("BCDFGHJKMPQRTVWXY2346789", "")
 
For $i = 1 To 29 Step 2
$bKey[Int($i / 2)] = Dec(StringMid($BinaryDPID, $i, 2))
Next
 
For $i = $dlen - 1 To 0 Step -1
If Mod(($i + 1), 6) = 0 Then
$sKey[$i] = "-"
Else
$hi = 0
For $n = $slen - 1 To 0 Step -1
$Value = BitOR(BitShift($hi, -8), $bKey[$n])
$bKey[$n] = Int($Value / 24)
$hi = Mod($Value, 24)
Next
$sKey[$i] = $Digits[$hi + 1]
EndIf
Next
 
For $i = 0 To 28
$Result = $Result & $sKey[$i]
Next
 
IF $Result = "BBBBB-BBBBB-BBBBB-BBBBB-BBBBB" Then $Result = ""
 
Return $Result
EndFunc

Chimaera · October 12, 2011

Thanks m8 ill try it at work tommoz and report back

NDog · September 30, 2012

I've modified JFX offline version. This is for use in a WINPE environment. If you are using a windows 64 PE environment you must encode this to 64bit. Therefore the Office 2010 detection needed to be slightly modified. Also in some versions of PE FileSelectFolder does not always work properly so I have set it to c:, but someone may want to improve it further.

#include 

;Local Windows
;~ $keys = _DecodeProductKeys()

;Offline Windows
$var = FileSelectFolder("Choose an offline Windows folder.", "C:",4)
If @error Then Exit

$keys = _DecodeProductKeys($var)

If @error Then
MsgBox(16, 'Error', $keys)
Else
_ArrayDisplay($keys, "Retrieved Windows Keys")
EndIf




Func _DecodeProductKeys($Offline = False)
Local $Array[9][2], $BinaryDPID, $KeyPos = 0x34 * 2 + 3, $RegKey, $i, $var, $unLoadHive = 0, $OSArch

IF Not $Offline Then
$Software = 'SOFTWARE'
$OSArch = @OSArch
Else
IF Not FileExists($Offline & '\system32\config\software') Then Return SetError(1, 0, 'Offline Windows invalid!')
IF (ShellExecuteWait('reg', 'load HKLM\_Off_SOFTWARE ' & $Offline & '\system32\config\software', '', '', @SW_HIDE)) = 0 Then
$unLoadHive = 1
Else
Return SetError(2, 0, 'Could not load Offline Windows registry!')
EndIf
$Software = '_Off_SOFTWARE'
IF FileExists($Offline & '\syswow64\kernel32.dll') Then $OSArch = 'x64'
EndIf

$Array[0][0] = 'Windows Key'
$BinaryDPID = RegRead('HKLM64\'& $Software &'\Microsoft\Windows NT\CurrentVersion', 'DigitalProductId')
$Array[0][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))


$Array[1][0] = 'Windows Key 4'
$BinaryDPID = RegRead('HKLM64\'& $Software &'\Microsoft\Windows NT\CurrentVersion', 'DigitalProductId4')
$Array[1][1] = _Base24_Decode(StringMid($BinaryDPID, 0x328 * 2 + 3))


$Array[2][0] = 'Windows Default'
$BinaryDPID = RegRead('HKLM64\'& $Software &'\Microsoft\Windows NT\CurrentVersion\DefaultProductKey', 'DigitalProductId')
$Array[2][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))


$Array[3][0] = 'Windows Default 4'
$BinaryDPID = RegRead('HKLM64\'& $Software &'\Microsoft\Windows NT\CurrentVersion\DefaultProductKey', 'DigitalProductId4')
$Array[3][1] = _Base24_Decode(StringMid($BinaryDPID, 0x328 * 2 + 3))



$Array[4][0] = 'Office XP Key'
$RegKey = 'HKLM\'& $Software &'\Microsoft\Office\10.0\Registration'
IF $OSArch = 'x64' Then $RegKey = 'HKLM64\'& $Software &'\Wow6432Node\Microsoft\Office\10.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[4][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))


$Array[5][0] = 'Office 2003 Key'
$RegKey = 'HKLM\'& $Software &'\Microsoft\Office\11.0\Registration'
IF $OSArch = 'x64' Then $RegKey = 'HKLM64\'& $Software &'\Wow6432Node\Microsoft\Office\11.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[5][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))


$Array[6][0] = 'Office 2007 Key'
$RegKey = 'HKLM\'& $Software &'\Microsoft\Office\12.0\Registration'
IF $OSArch = 'x64' Then $RegKey = 'HKLM64\'& $Software &'\Wow6432Node\Microsoft\Office\12.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[6][1] = _Base24_Decode(StringMid($BinaryDPID, $KeyPos))


$Array[7][0] = 'Office 2010 HKLM Key'
$RegKey = 'HKLM64\'& $Software &'\Microsoft\Office\14.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[7][1] = _Base24_Decode(StringMid($BinaryDPID, 0x328 * 2 + 3))


$Array[8][0] = 'Office 2010 HKLM Wow6432Node Key'
$RegKey = 'HKLM64\'& $Software &'\Wow6432Node\Microsoft\Office\14.0\Registration'
$BinaryDPID = ''
For $i= 1 to 100
$var = RegEnumKey($RegKey, $i)
If @error <> 0 then ExitLoop
$BinaryDPID = RegRead($RegKey & '\' & $var, 'DigitalProductId')
IF Not @error Then ExitLoop
Next
$Array[8][1] = _Base24_Decode(StringMid($BinaryDPID, 0x328 * 2 + 3))


IF $unLoadHive Then ShellExecuteWait('reg', 'unload HKLM\_Off_SOFTWARE', '', '', @SW_HIDE)

Return $Array

EndFunc



Func _Base24_Decode($BinaryDPID)

Local $bKey[15], $sKey[29], $Digits[24], $Value = 0, $hi = 0, $n = 0, $i = 0, $dlen = 29, $slen = 15, $Result
$Digits = StringSplit("BCDFGHJKMPQRTVWXY2346789", "")

For $i = 1 To 29 Step 2
$bKey[Int($i / 2)] = Dec(StringMid($BinaryDPID, $i, 2))
Next

For $i = $dlen - 1 To 0 Step -1
If Mod(($i + 1), 6) = 0 Then
$sKey[$i] = "-"
Else
$hi = 0
For $n = $slen - 1 To 0 Step -1
$Value = BitOR(BitShift($hi, -8), $bKey[$n])
$bKey[$n] = Int($Value / 24)
$hi = Mod($Value, 24)
Next
$sKey[$i] = $Digits[$hi + 1]
EndIf
Next

For $i = 0 To 28
$Result = $Result & $sKey[$i]
Next

IF $Result = "BBBBB-BBBBB-BBBBB-BBBBB-BBBBB" Then $Result = ""

Return $Result
EndFunc

PixelPixPanreyes · December 24, 2012

Hello. Has anyone figured out how to also support Windows 8 key?

I got this VBS code from mydigitallife.info but I don't know how to convert it to AutoIT!

Set WshShell = CreateObject("WScript.Shell")
MsgBox ConvertToKey(WshShell.RegRead("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\DigitalProductId"))

Function ConvertToKey(Key)
    Const KeyOffset = 52
    isWin8 = (Key(66) \ 6) And 1
    Key(66) = (Key(66) And &HF7) Or ((isWin8 And 2) * 4)
    i = 24
    Chars = "BCDFGHJKMPQRTVWXY2346789"
    Do
        Cur = 0
        X = 14
        Do
            Cur = Cur * 256
            Cur = Key(X + KeyOffset) + Cur
            Key(X + KeyOffset) = (Cur \ 24)
            Cur = Cur Mod 24
            X = X -1
        Loop While X >= 0
        i = i -1
        KeyOutput = Mid(Chars, Cur + 1, 1) & KeyOutput
        Last = Cur
    Loop While i >= 0
    If (isWin8 = 1) Then
        keypart1 = Mid(KeyOutput, 2, Last)
        insert = "N"
        KeyOutput = Replace(KeyOutput, keypart1, keypart1 & insert, 2, 1, 0)
        If Last = 0 Then KeyOutput = insert & KeyOutput
    End If
    a = Mid(KeyOutput, 1, 5)
    b = Mid(KeyOutput, 6, 5)
    c = Mid(KeyOutput, 11, 5)
    d = Mid(KeyOutput, 16, 5)
    e = Mid(KeyOutput, 21, 5)
    ConvertToKey = a & "-" & b & "-" & c & "-" & d & "-" & e
End Function

I'm a bad programmer and I should feel bad

UEZ · December 24, 2012

Try this

;converted by UEZ 2012
MsgBox(0, "Windows Key", "Your " & @OSVersion & " key is : " & GetWindowsProductKey())

Func GetWindowsProductKey()
    Local Const $iKeyOffset = 52
    Local $sHKLM = "HKLM", $i
    If @OSArch = "X64" Then $sHKLM &= "64"
    Local $bKey = RegRead($sHKLM & "\SOFTWARE\Microsoft\Windows NT\CurrentVersion", "DigitalProductId")
    Local $aKeys[BinaryLen($bKey)]
    For $i = 0 To UBound($aKeys) - 1
        $aKeys[$i] = Int(BinaryMid($bKey, $i + 1, 1))
    Next
    Local Const $isWin8 = BitAND(Int($aKeys[66]) / 6, 1)
    $aKeys[66] = BitOR(BitAND($aKeys[66], 0xF7), BitAND($isWin8, 2) * 4)
    $i = 24
    Local $sChars = "BCDFGHJKMPQRTVWXY2346789", $iCur, $iX, $sKeyOutput, $iLast
    While $i > -1
        $iCur = 0
        $iX = 14
        While $iX > -1
            $iCur *= 256
            $iCur = $aKeys[$iX + $iKeyOffset] + $iCur
            $aKeys[$iX + $iKeyOffset] = Int($iCur / 24)
            $iCur = Mod($iCur, 24)
            $iX -= 1
        WEnd
        $i -= 1
        $sKeyOutput = StringMid($sChars, $iCur + 1, 1) & $sKeyOutput
        $iLast = $iCur
    WEnd
    If $isWin8 Then
        Local Const $sKeyPart1 = StringMid($sKeyOutput, 2, $iLast)
        Local Const $sInsert = "N"
        $sKeyOutput = StringReplace(StringTrimLeft($sKeyOutput, 1), $sKeyPart1, $sKeyPart1 & $sInsert, 1)
        If Not $iLast Then $sKeyOutput = $sInsert & $sKeyOutput
    EndIf
    Return StringRegExpReplace($sKeyOutput, '(\w{5})(\w{5})(\w{5})(\w{5})(\w{5})', '\1-\2-\3-\4-\5')
;~  Return StringMid($sKeyOutput, 1, 5) & "-" & _
;~                  StringMid($sKeyOutput, 6, 5) & "-" & _
;~                  StringMid($sKeyOutput, 11, 5) & "-" & _
;~                  StringMid($sKeyOutput, 16, 5) & "-" & _
;~                  StringMid($sKeyOutput, 21, 5)
EndFunc

#cs
Set WshShell = CreateObject("WScript.Shell")
MsgBox ConvertToKey(WshShell.RegRead("HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\DigitalProductId"))

Function ConvertToKey(Key)
    Const KeyOffset = 52
    isWin8 = (Key(66) \ 6) And 1
    Key(66) = (Key(66) And &HF7) Or ((isWin8 And 2) * 4)
    i = 24
    Chars = "BCDFGHJKMPQRTVWXY2346789"
    Do
        Cur = 0
        X = 14
        Do
            Cur = Cur * 256
            Cur = Key(X + KeyOffset) + Cur
            Key(X + KeyOffset) = (Cur \ 24)
            Cur = Cur Mod 24
            X = X -1
        Loop While X >= 0
        i = i -1
        KeyOutput = Mid(Chars, Cur + 1, 1) & KeyOutput
        Last = Cur
    Loop While i >= 0
    If (isWin8 = 1) Then
        keypart1 = Mid(KeyOutput, 2, Last)
        insert = "N"
        KeyOutput = Replace(KeyOutput, keypart1, keypart1 & insert, 2, 1, 0)
        If Last = 0 Then KeyOutput = insert & KeyOutput
    End If
    a = Mid(KeyOutput, 1, 5)
    b = Mid(KeyOutput, 6, 5)
    c = Mid(KeyOutput, 11, 5)
    d = Mid(KeyOutput, 16, 5)
    e = Mid(KeyOutput, 21, 5)
    ConvertToKey = a & "-" & b & "-" & c & "-" & d & "-" & e
End Function
#ce

and let me know whether it works properly.

Br,

UEZ

Edited December 26, 2012 by UEZ

guinness · December 24, 2012

Nice conversion UEZ.

guinness · December 24, 2012

Maybe that StringMid return pattern could be replaced with this >>

Return StringRegExpReplace($sKeyOutput, '(\w{5})(\w{5})(\w{5})(\w{5})(\w{5})', '\1-\2-\3-\4-\5')

UEZ · December 24, 2012

This was just a flat conversion and thus enough room for optimizations.

Br,

UEZ

PixelPixPanreyes · December 25, 2012

Thanks! It worked perfectly!

supersonic · January 7, 2013

@ UEZ:

Thank you for the conversion! :-)

The code seems to work properly for Windows Server 2012 / 8 only?

Can it be modified to work for all 'DigitalProductId' values?

JFX · January 8, 2013

@ UEZ:
Thank you for the conversion! :-)
The code seems to work properly for Windows Server 2012 / 8 only?
Can it be modified to work for all 'DigitalProductId' values?

I've updated the script one 1 post, using UEZ's conversion.

Should now work on all Windows versions, but have not checked yet.

Edited January 8, 2013 by JFX

Windows and Office key

Recommended Posts

Link to comment

Share on other sites

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

JFX

Posted Images

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members