Jump to content

connect Two program


wolf9228
 Share

Recommended Posts

connectTwoprogram.zip

ProgramA.au3

#Include <WinAPI.au3>
#Include <SendMessage.au3>
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

Global $ConnectOK = 99999 , $iGuiHwnd = 0 , $ConnectHWnd , $ConnectMsg

$GuiHwnd = GUICreate("ProgramA", 199, 147, 88, 177)
$Button1 = GUICtrlCreateButton("GetConnectHWnd", 16, 16, 169, 33, $WS_GROUP)
$Button2 = GUICtrlCreateButton("SendMessage", 13, 69, 169, 33, $WS_GROUP)
$ConnectMsg = RegisterConnectMsg("ConnectMsg","Password")
$DataTransferMsg = RegisterMsg("DataTransferMsg","DataTransferMsgProc")
GUISetState(@SW_SHOW)


While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $Button1
$ConnectHWnd = GetConnectHWnd($GuiHwnd)
if ($ConnectHWnd) Then MsgBox(0,"MSG","Ok")
Case $Button2
if ($ConnectHWnd) Then _
Send_Message($ConnectHWnd,$DataTransferMsg,1,2,3,4)
EndSwitch
WEnd


Func DataTransferMsgProc($hWnd,$Msg,$wParam,$lParam)

$WParamLoWord = _WinAPI_LoWord($wParam)
$WParamHiWord = _WinAPI_HiWord($wParam)
$LParamLoWord = _WinAPI_LoWord($lParam)
$LParamHiWord = _WinAPI_HiWord($lParam)

$Text = _
"From ProgramB To ProgramA" & @CRLF & _
"$hWnd ==> " & $hWnd & @CRLF & _
"$WParamLoWord ==> " & $WParamLoWord & @CRLF & _
"$WParamHiWord ==> " & $WParamHiWord & @CRLF & _
"$LParamLoWord ==> " & $LParamLoWord & @CRLF & _
"$LParamHiWord ==> " & $LParamHiWord

MsgBox(0,"DataTransferMsg",$Text)

Return 1
EndFunc

Func RegisterConnectMsg($NewStrMsgConnect,$EncryptPassword)
$NewMsgId = RegisterWindowMessage(String($EncryptPassword & $NewStrMsgConnect))
if @error Then Return SetError(2,0,0)
GUIRegisterMsg($NewMsgId,"ConnectProc")
if @error Then Return SetError(3,0,0)
Return SetError(0,0,$NewMsgId)
EndFunc

Func GetConnectHWnd($GuiHwnd,$TimeOut = 10000)
if Not IsHWnd($GuiHwnd) Then Return SetError(1,0,0)
Local $RT = 0 , $HWND = 0 , $begin = TimerInit()
While 1
$HWND = FindWindowEx(0,$HWND,0,0)
if ($GuiHwnd = $HWND) Then ContinueLoop
$RT = _SendMessage($HWND,$ConnectMsg,0,0)
if ($RT = $ConnectOK) Or TimerDiff($begin) >= $TimeOut Then ExitLoop
WEnd
if ($RT <> $ConnectOK) Then Return SetError(4,0,0)
Return SetError(0,0,$HWND)
EndFunc

Func ConnectProc($hWnd,$Msg,$wParam,$lParam)
Return $ConnectOK
EndFunc

Func Send_Message($ConnectHWnd,$MsgId,$WParamLoWord,$WParamHiWord,$LParamLoWord,$LParamHiWord)
$WParam = _WinAPI_MakeLong($WParamLoWord,$WParamHiWord)
$LParam = _WinAPI_MakeLong($LParamLoWord,$LParamHiWord)
Return _SendMessage($ConnectHWnd,$MsgId,$WParam,$LParam)
EndFunc

Func RegisterMsg($NewStrMsgName,$MsgFunction)
$NewMsgId = RegisterWindowMessage($NewStrMsgName)
if @error Then Return SetError(1,0,0)
GUIRegisterMsg($NewMsgId,$MsgFunction)
if @error Then Return SetError(2,0,0)
Return SetError(0,0,$NewMsgId)
EndFunc

Func FindWindowEx($hwndParent,$hwndChildAfter,$lpszClass,$lpszWindow)
Local $DataTypeA = "int" , $DataTypeB = "int"
if IsString($lpszClass) Then $DataTypeA = "WSTR"
if IsString($lpszWindow) Then $DataTypeB = "WSTR"
$RT = DllCall("User32.dll","HWND","FindWindowExW","HWND",$hwndParent,"HWND",$hwndChildAfter, _
$DataTypeA,$lpszClass,$DataTypeB,$lpszWindow)
if @error Or $RT[0] = 0 Then Return SetError(1,0,0)
Return SetError(0,0,$RT[0])
EndFunc

Func RegisterWindowMessage($lpString)
$RT = DllCall("User32.dll","int","RegisterWindowMessageW","WSTR",$lpString)
if @error Or $RT[0] = 0 Then Return SetError(1,0,0)
Return SetError(0,0,$RT[0])
EndFunc

ProgramB.au3

#Include <WinAPI.au3>
#Include <SendMessage.au3>
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

Global $ConnectOK = 99999 , $iGuiHwnd = 0 , $ConnectHWnd , $ConnectMsg

$GuiHwnd = GUICreate("ProgramB", 199, 147, 88, 177)
$Button1 = GUICtrlCreateButton("GetConnectHWnd", 16, 16, 169, 33, $WS_GROUP)
$Button2 = GUICtrlCreateButton("SendMessage", 13, 69, 169, 33, $WS_GROUP)
$ConnectMsg = RegisterConnectMsg("ConnectMsg","Password")
$DataTransferMsg = RegisterMsg("DataTransferMsg","DataTransferMsgProc")
GUISetState(@SW_SHOW)


While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $Button1
$ConnectHWnd = GetConnectHWnd($GuiHwnd)
if ($ConnectHWnd) Then MsgBox(0,"MSG","Ok")
Case $Button2
if ($ConnectHWnd) Then _
Send_Message($ConnectHWnd,$DataTransferMsg,5,6,7,8)
EndSwitch
WEnd


Func DataTransferMsgProc($hWnd,$Msg,$wParam,$lParam)

$WParamLoWord = _WinAPI_LoWord($wParam)
$WParamHiWord = _WinAPI_HiWord($wParam)
$LParamLoWord = _WinAPI_LoWord($lParam)
$LParamHiWord = _WinAPI_HiWord($lParam)

$Text = _
"From ProgramA To ProgramB" & @CRLF & _
"$hWnd ==> " & $hWnd & @CRLF & _
"$WParamLoWord ==> " & $WParamLoWord & @CRLF & _
"$WParamHiWord ==> " & $WParamHiWord & @CRLF & _
"$LParamLoWord ==> " & $LParamLoWord & @CRLF & _
"$LParamHiWord ==> " & $LParamHiWord

MsgBox(0,"DataTransferMsg",$Text)

Return 1
EndFunc

Func RegisterConnectMsg($NewStrMsgConnect,$EncryptPassword)
$NewMsgId = RegisterWindowMessage(String($EncryptPassword & $NewStrMsgConnect))
if @error Then Return SetError(2,0,0)
GUIRegisterMsg($NewMsgId,"ConnectProc")
if @error Then Return SetError(3,0,0)
Return SetError(0,0,$NewMsgId)
EndFunc

Func GetConnectHWnd($GuiHwnd,$TimeOut = 10000)
if Not IsHWnd($GuiHwnd) Then Return SetError(1,0,0)
Local $RT = 0 , $HWND = 0 , $begin = TimerInit()
While 1
$HWND = FindWindowEx(0,$HWND,0,0)
if ($GuiHwnd = $HWND) Then ContinueLoop
$RT = _SendMessage($HWND,$ConnectMsg,0,0)
if ($RT = $ConnectOK) Or TimerDiff($begin) >= $TimeOut Then ExitLoop
WEnd
if ($RT <> $ConnectOK) Then Return SetError(4,0,0)
Return SetError(0,0,$HWND)
EndFunc

Func ConnectProc($hWnd,$Msg,$wParam,$lParam)
Return $ConnectOK
EndFunc

Func Send_Message($ConnectHWnd,$MsgId,$WParamLoWord,$WParamHiWord,$LParamLoWord,$LParamHiWord)
$WParam = _WinAPI_MakeLong($WParamLoWord,$WParamHiWord)
$LParam = _WinAPI_MakeLong($LParamLoWord,$LParamHiWord)
Return _SendMessage($ConnectHWnd,$MsgId,$WParam,$LParam)
EndFunc

Func RegisterMsg($NewStrMsgName,$MsgFunction)
$NewMsgId = RegisterWindowMessage($NewStrMsgName)
if @error Then Return SetError(1,0,0)
GUIRegisterMsg($NewMsgId,$MsgFunction)
if @error Then Return SetError(2,0,0)
Return SetError(0,0,$NewMsgId)
EndFunc

Func FindWindowEx($hwndParent,$hwndChildAfter,$lpszClass,$lpszWindow)
Local $DataTypeA = "int" , $DataTypeB = "int"
if IsString($lpszClass) Then $DataTypeA = "WSTR"
if IsString($lpszWindow) Then $DataTypeB = "WSTR"
$RT = DllCall("User32.dll","HWND","FindWindowExW","HWND",$hwndParent,"HWND",$hwndChildAfter, _
$DataTypeA,$lpszClass,$DataTypeB,$lpszWindow)
if @error Or $RT[0] = 0 Then Return SetError(1,0,0)
Return SetError(0,0,$RT[0])
EndFunc

Func RegisterWindowMessage($lpString)
$RT = DllCall("User32.dll","int","RegisterWindowMessageW","WSTR",$lpString)
if @error Or $RT[0] = 0 Then Return SetError(1,0,0)
Return SetError(0,0,$RT[0])
EndFunc
Edited by wolf9228

صرح السماء كان هنا

 

Link to comment
Share on other sites

Can we send other data than Inits? :unsure:

 

Spoiler

Using OS: Win 7 Professional, Using AutoIt Ver(s): 3.3.6.1 / 3.3.8.1

AutoIt_Rus_Community.png AutoIt Russian Community

My Work...

Spoiler

AutoIt_Icon_small.pngProjects: ATT - Application Translate Tool {new}| BlockIt - Block files & folders {new}| SIP - Selected Image Preview {new}| SISCABMAN - SciTE Abbreviations Manager {new}| AutoIt Path Switcher | AutoIt Menu for Opera! | YouTube Download Center! | Desktop Icons Restorator | Math Tasks | KeyBoard & Mouse Cleaner | CaptureIt - Capture Images Utility | CheckFileSize Program

AutoIt_Icon_small.pngUDFs: OnAutoItErrorRegister - Handle AutoIt critical errors {new}| AutoIt Syntax Highlight {new}| Opera Library! | Winamp Library | GetFolderToMenu | Custom_InputBox()! | _FileRun UDF | _CheckInput() UDF | _GUIInputSetOnlyNumbers() UDF | _FileGetValidName() UDF | _GUICtrlCreateRadioCBox UDF | _GuiCreateGrid() | _PathSplitByRegExp() | _GUICtrlListView_MoveItems - UDF | GUICtrlSetOnHover_UDF! | _ControlTab UDF! | _MouseSetOnEvent() UDF! | _ProcessListEx - UDF | GUICtrl_SetResizing - UDF! | Mod. for _IniString UDFs | _StringStripChars UDF | _ColorIsDarkShade UDF | _ColorConvertValue UDF | _GUICtrlTab_CoverBackground | CUI_App_UDF | _IncludeScripts UDF | _AutoIt3ExecuteCode | _DragList UDF | Mod. for _ListView_Progress | _ListView_SysLink | _GenerateRandomNumbers | _BlockInputEx | _IsPressedEx | OnAutoItExit Handler | _GUICtrlCreateTFLabel UDF | WinControlSetEvent UDF | Mod. for _DirGetSizeEx UDF
 
AutoIt_Icon_small.pngExamples: 
ScreenSaver Demo - Matrix included | Gui Drag Without pause the script | _WinAttach()! | Turn Off/On Monitor | ComboBox Handler Example | Mod. for "Thinking Box" | Cool "About" Box | TasksBar Imitation Demo

Like the Projects/UDFs/Examples? Please rate the topic (up-right corner of the post header: Rating AutoIt_Rating.gif)

* === My topics === *

==================================================
My_Userbar.gif
==================================================

 

 

 

AutoIt is simple, subtle, elegant. © AutoIt Team

Link to comment
Share on other sites

Can we send other data than Inits? :unsure:

Yes, you can send a Struct Pointer .. See this example

ProgramA.au3

#Include <WinAPI.au3>
#Include <SendMessage.au3>
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

Global $ConnectOK = 99999 , $iGuiHwnd = 0 , $ConnectHWnd , $ConnectMsg

$GuiHwnd = GUICreate("ProgramA", 199, 147, 88, 177)
$Button1 = GUICtrlCreateButton("GetConnectHWnd", 16, 16, 169, 33, $WS_GROUP)
$Button2 = GUICtrlCreateButton("SendMessage", 13, 69, 169, 33, $WS_GROUP)
$ConnectMsg = RegisterConnectMsg("ConnectMsg","Password")
$DataTransferMsg = RegisterMsg("DataTransferMsg","DataTransferMsgProc")
GUISetState(@SW_SHOW)


While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $Button1
$ConnectHWnd = GetConnectHWnd($GuiHwnd)
if ($ConnectHWnd) Then MsgBox(0,"MSG","Ok")
Case $Button2
if ($ConnectHWnd) Then
$StructTag = "int var1;ubyte var2;uint var3;char var4[128]"
$Struct = DllStructCreate($StructTag)
DllStructSetData($Struct,"var1",-1)
DllStructSetData($Struct,"var2",255)
DllStructSetData($Struct,"var3",-1)
DllStructSetData($Struct,"var4","Hello")
DllStructSetData($Struct,"var4",Asc("h"),1)
$StructPtr = DllStructGetPtr($Struct)
_SendMessage($ConnectHWnd,$DataTransferMsg,_WinAPI_GetCurrentProcessID(),$StructPtr)
EndIf
EndSwitch
WEnd

Func DataTransferMsgProc($hWnd,$Msg,$ProcessID,$Pointer)
$StructTag = "int var1;ubyte var2;uint var3;char var4[128]"
$Struct = Read_Pointer_FromProcessMemory($ProcessID,$Pointer,$StructTag)
MsgBox(0,"DllStruct From ProgramB TO ProgramA", _
        "Struct Size: " & DllStructGetSize($Struct) & @CRLF & _
        "Struct pointer: " & DllStructGetPtr($Struct) & @CRLF & _
        "Data:" & @CRLF & _
        DllStructGetData($Struct,1) & @CRLF & _
        DllStructGetData($Struct,2) & @CRLF & _
        DllStructGetData($Struct,3) & @CRLF & _
        DllStructGetData($Struct,4))
Return 1
EndFunc

Func Read_Pointer_FromProcessMemory($ProcessID,$Pointer,$StructTag)
Local $iSYNCHRONIZE = (0x00100000),$iSTANDARD_RIGHTS_REQUIRED = (0x000F0000)
Local $iPROCESS_ALL_ACCESS  = ($iSTANDARD_RIGHTS_REQUIRED + $iSYNCHRONIZE + 0xFFF)
Local $hProcess , $Struct , $StructPtr , $StructSize , $iRead
$hProcess = _WinAPI_OpenProcess($iPROCESS_ALL_ACCESS,False,$ProcessID)
if @error Then Return SetError(@error,1,$Struct)
$Struct = DllStructCreate($StructTag)
$StructSize = DllStructGetSize($Struct)
$StructPtr = DllStructGetPtr($Struct)
_WinAPI_ReadProcessMemory($hProcess,$Pointer,$StructPtr,$StructSize,$iRead)
Return SetError(@error,2,$Struct)
EndFunc

Func RegisterConnectMsg($NewStrMsgConnect,$EncryptPassword)
$NewMsgId = RegisterWindowMessage(String($EncryptPassword & $NewStrMsgConnect))
if @error Then Return SetError(2,0,0)
GUIRegisterMsg($NewMsgId,"ConnectProc")
if @error Then Return SetError(3,0,0)
Return SetError(0,0,$NewMsgId)
EndFunc

Func GetConnectHWnd($GuiHwnd,$TimeOut = 10000)
if Not IsHWnd($GuiHwnd) Then Return SetError(1,0,0)
Local $RT = 0 , $HWND = 0 , $begin = TimerInit()
While 1
$HWND = FindWindowEx(0,$HWND,0,0)
if ($GuiHwnd = $HWND) Then ContinueLoop
$RT = _SendMessage($HWND,$ConnectMsg,0,0)
if ($RT = $ConnectOK) Or TimerDiff($begin) >= $TimeOut Then ExitLoop
WEnd
if ($RT <> $ConnectOK) Then Return SetError(4,0,0)
Return SetError(0,0,$HWND)
EndFunc

Func ConnectProc($hWnd,$Msg,$wParam,$lParam)
Return $ConnectOK
EndFunc

Func RegisterMsg($NewStrMsgName,$MsgFunction)
$NewMsgId = RegisterWindowMessage($NewStrMsgName)
if @error Then Return SetError(1,0,0)
GUIRegisterMsg($NewMsgId,$MsgFunction)
if @error Then Return SetError(2,0,0)
Return SetError(0,0,$NewMsgId)
EndFunc

Func FindWindowEx($hwndParent,$hwndChildAfter,$lpszClass,$lpszWindow)
Local $DataTypeA = "int" , $DataTypeB = "int"
if IsString($lpszClass) Then $DataTypeA = "WSTR"
if IsString($lpszWindow) Then $DataTypeB = "WSTR"
$RT = DllCall("User32.dll","HWND","FindWindowExW","HWND",$hwndParent,"HWND",$hwndChildAfter, _
$DataTypeA,$lpszClass,$DataTypeB,$lpszWindow)
if @error Or $RT[0] = 0 Then Return SetError(1,0,0)
Return SetError(0,0,$RT[0])
EndFunc

Func RegisterWindowMessage($lpString)
$RT = DllCall("User32.dll","int","RegisterWindowMessageW","WSTR",$lpString)
if @error Or $RT[0] = 0 Then Return SetError(1,0,0)
Return SetError(0,0,$RT[0])
EndFunc

ProgramB.au3

#Include <WinAPI.au3>
#Include <SendMessage.au3>
#include <ButtonConstants.au3>
#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>

Global $ConnectOK = 99999 , $iGuiHwnd = 0 , $ConnectHWnd , $ConnectMsg

$GuiHwnd = GUICreate("ProgramB", 199, 147, 88, 177)
$Button1 = GUICtrlCreateButton("GetConnectHWnd", 16, 16, 169, 33, $WS_GROUP)
$Button2 = GUICtrlCreateButton("SendMessage", 13, 69, 169, 33, $WS_GROUP)
$ConnectMsg = RegisterConnectMsg("ConnectMsg","Password")
$DataTransferMsg = RegisterMsg("DataTransferMsg","DataTransferMsgProc")
GUISetState(@SW_SHOW)


While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
Exit
Case $Button1
$ConnectHWnd = GetConnectHWnd($GuiHwnd)
if ($ConnectHWnd) Then MsgBox(0,"MSG","Ok")
Case $Button2
if ($ConnectHWnd) Then
$StructTag = "int var1;ubyte var2;uint var3;char var4[128]"
$Struct = DllStructCreate($StructTag)
DllStructSetData($Struct,"var1",-2)
DllStructSetData($Struct,"var2",555)
DllStructSetData($Struct,"var3",-2)
DllStructSetData($Struct,"var4","Autoit")
DllStructSetData($Struct,"var4",Asc("A"),1)
$StructPtr = DllStructGetPtr($Struct)
_SendMessage($ConnectHWnd,$DataTransferMsg,_WinAPI_GetCurrentProcessID(),$StructPtr)
EndIf
EndSwitch
WEnd

Func DataTransferMsgProc($hWnd,$Msg,$ProcessID,$Pointer)
$StructTag = "int var1;ubyte var2;uint var3;char var4[128]"
$Struct = Read_Pointer_FromProcessMemory($ProcessID,$Pointer,$StructTag)
MsgBox(0,"DllStruct From ProgramA TO ProgramB", _
        "Struct Size: " & DllStructGetSize($Struct) & @CRLF & _
        "Struct pointer: " & DllStructGetPtr($Struct) & @CRLF & _
        "Data:" & @CRLF & _
        DllStructGetData($Struct,1) & @CRLF & _
        DllStructGetData($Struct,2) & @CRLF & _
        DllStructGetData($Struct,3) & @CRLF & _
        DllStructGetData($Struct,4))
Return 1
EndFunc

Func Read_Pointer_FromProcessMemory($ProcessID,$Pointer,$StructTag)
Local $iSYNCHRONIZE = (0x00100000),$iSTANDARD_RIGHTS_REQUIRED = (0x000F0000)
Local $iPROCESS_ALL_ACCESS  = ($iSTANDARD_RIGHTS_REQUIRED + $iSYNCHRONIZE + 0xFFF)
Local $hProcess , $Struct , $StructPtr , $StructSize , $iRead
$hProcess = _WinAPI_OpenProcess($iPROCESS_ALL_ACCESS,False,$ProcessID)
if @error Then Return SetError(@error,1,$Struct)
$Struct = DllStructCreate($StructTag)
$StructSize = DllStructGetSize($Struct)
$StructPtr = DllStructGetPtr($Struct)
_WinAPI_ReadProcessMemory($hProcess,$Pointer,$StructPtr,$StructSize,$iRead)
Return SetError(@error,2,$Struct)
EndFunc

Func RegisterConnectMsg($NewStrMsgConnect,$EncryptPassword)
$NewMsgId = RegisterWindowMessage(String($EncryptPassword & $NewStrMsgConnect))
if @error Then Return SetError(2,0,0)
GUIRegisterMsg($NewMsgId,"ConnectProc")
if @error Then Return SetError(3,0,0)
Return SetError(0,0,$NewMsgId)
EndFunc

Func GetConnectHWnd($GuiHwnd,$TimeOut = 10000)
if Not IsHWnd($GuiHwnd) Then Return SetError(1,0,0)
Local $RT = 0 , $HWND = 0 , $begin = TimerInit()
While 1
$HWND = FindWindowEx(0,$HWND,0,0)
if ($GuiHwnd = $HWND) Then ContinueLoop
$RT = _SendMessage($HWND,$ConnectMsg,0,0)
if ($RT = $ConnectOK) Or TimerDiff($begin) >= $TimeOut Then ExitLoop
WEnd
if ($RT <> $ConnectOK) Then Return SetError(4,0,0)
Return SetError(0,0,$HWND)
EndFunc

Func ConnectProc($hWnd,$Msg,$wParam,$lParam)
Return $ConnectOK
EndFunc

Func RegisterMsg($NewStrMsgName,$MsgFunction)
$NewMsgId = RegisterWindowMessage($NewStrMsgName)
if @error Then Return SetError(1,0,0)
GUIRegisterMsg($NewMsgId,$MsgFunction)
if @error Then Return SetError(2,0,0)
Return SetError(0,0,$NewMsgId)
EndFunc

Func FindWindowEx($hwndParent,$hwndChildAfter,$lpszClass,$lpszWindow)
Local $DataTypeA = "int" , $DataTypeB = "int"
if IsString($lpszClass) Then $DataTypeA = "WSTR"
if IsString($lpszWindow) Then $DataTypeB = "WSTR"
$RT = DllCall("User32.dll","HWND","FindWindowExW","HWND",$hwndParent,"HWND",$hwndChildAfter, _
$DataTypeA,$lpszClass,$DataTypeB,$lpszWindow)
if @error Or $RT[0] = 0 Then Return SetError(1,0,0)
Return SetError(0,0,$RT[0])
EndFunc

Func RegisterWindowMessage($lpString)
$RT = DllCall("User32.dll","int","RegisterWindowMessageW","WSTR",$lpString)
if @error Or $RT[0] = 0 Then Return SetError(1,0,0)
Return SetError(0,0,$RT[0])
EndFunc

صرح السماء كان هنا

 

Link to comment
Share on other sites

Yes, you can send a Struct Pointer .. See this example

Wow, so we can transfer even arrays... nice!

P.S

What about objects? :unsure:

 

Spoiler

Using OS: Win 7 Professional, Using AutoIt Ver(s): 3.3.6.1 / 3.3.8.1

AutoIt_Rus_Community.png AutoIt Russian Community

My Work...

Spoiler

AutoIt_Icon_small.pngProjects: ATT - Application Translate Tool {new}| BlockIt - Block files & folders {new}| SIP - Selected Image Preview {new}| SISCABMAN - SciTE Abbreviations Manager {new}| AutoIt Path Switcher | AutoIt Menu for Opera! | YouTube Download Center! | Desktop Icons Restorator | Math Tasks | KeyBoard & Mouse Cleaner | CaptureIt - Capture Images Utility | CheckFileSize Program

AutoIt_Icon_small.pngUDFs: OnAutoItErrorRegister - Handle AutoIt critical errors {new}| AutoIt Syntax Highlight {new}| Opera Library! | Winamp Library | GetFolderToMenu | Custom_InputBox()! | _FileRun UDF | _CheckInput() UDF | _GUIInputSetOnlyNumbers() UDF | _FileGetValidName() UDF | _GUICtrlCreateRadioCBox UDF | _GuiCreateGrid() | _PathSplitByRegExp() | _GUICtrlListView_MoveItems - UDF | GUICtrlSetOnHover_UDF! | _ControlTab UDF! | _MouseSetOnEvent() UDF! | _ProcessListEx - UDF | GUICtrl_SetResizing - UDF! | Mod. for _IniString UDFs | _StringStripChars UDF | _ColorIsDarkShade UDF | _ColorConvertValue UDF | _GUICtrlTab_CoverBackground | CUI_App_UDF | _IncludeScripts UDF | _AutoIt3ExecuteCode | _DragList UDF | Mod. for _ListView_Progress | _ListView_SysLink | _GenerateRandomNumbers | _BlockInputEx | _IsPressedEx | OnAutoItExit Handler | _GUICtrlCreateTFLabel UDF | WinControlSetEvent UDF | Mod. for _DirGetSizeEx UDF
 
AutoIt_Icon_small.pngExamples: 
ScreenSaver Demo - Matrix included | Gui Drag Without pause the script | _WinAttach()! | Turn Off/On Monitor | ComboBox Handler Example | Mod. for "Thinking Box" | Cool "About" Box | TasksBar Imitation Demo

Like the Projects/UDFs/Examples? Please rate the topic (up-right corner of the post header: Rating AutoIt_Rating.gif)

* === My topics === *

==================================================
My_Userbar.gif
==================================================

 

 

 

AutoIt is simple, subtle, elegant. © AutoIt Team

Link to comment
Share on other sites

Wow, so we can transfer even arrays... nice!

P.S

What about objects? :unsure:

I do not think that it is possible to manipulate objects and structures Directly

Through the function send message but can transfer stored in the point and then

re- Configured again

objects can be through windows functions stored in the structures

Such functions

HBITMAP Obj

GetDIBits

SetDIBits

HPEN Obj

ExtCreatePen

CreatePenIndirect

صرح السماء كان هنا

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...