New user button issue

[insomnai]

Hi guys and gals.. I'm terribly sorry but two days of experimenting with the simplicity that is getting a button to start a program has me near noobsuicide.

I have made a gui, pretty simple with a number of tabs and buttons on each tab. Each button will run a program eg office2010.exe which not suprisingly will install Office 2010.

What I don't understand is why Run('notepad.exe') works but not Run('office2010.exe') even when the file sits in the same directory as the script.

Also ideally i want to place the programs in a folder called Tools so I don't have all the programs sat on the root of the usb pen that i'm setting up.

I have a batch script with menu's that does all this, but AutoIT is very new to me and I want something sleeker :-)

[guinness]

Because Run() works in a similar way to how the "Run Box" (Win+R) works. The Notepad.exe version works because Notepad is present in the C:\Windows\System32 directory. So if the Office Install program was present there, then the other version would work too. Normally as a rule of thumb I tend to use a Full Paths to overcome this problem, even with Notepad & Calc!

Use something like this >>

$sToolsFolder = @ScriptDir & "\Tools\" ; <<<<< If your program is running at the Root e.g. F:\ then the programs should be placed in "F:\Tools\"
Run($sToolsFolder & "YourProgram.exe")

[insomnai]

Thank you very much, that is great.

However... (obviously this was coming lol)

your declaration of the $sToolsFolder = @scriptdir, dare I presume that @scriptdir is a variable that is set in stone? as in, if I placed my script in c:\blahblah\myscripts\myscript.au3 then the variable @scriptdir would return c:\blahblah\myscripts\ ?

Also, the $sToolsFolder is going to be the folder that stores all of my installers, would I be able to run the following

$sToolsFolder = @ScriptDir & "\Tools\" ; <<<<< If your program is running at the Root e.g. F:\ then the programs should be placed in "F:\Tools\"

Run($sToolsFolder & "YourProgram.exe")

Run($sToolsFolder & "YourProgram2.exe")

Run($sToolsFolder & "YourProgram3.exe")

Run($sToolsFolder & "YourProgram4.exe")

Would this work?

Many thanks for your kind reply

Edited February 26, 2011 by insomnai

[guinness]

Search the Help File for @ScriptDir and Macro Reference

@ScriptDir is the same as C:\blahblah\myscripts (without the last backslash)

Edited February 26, 2011 by guinness

[insomnai]

Also, some of my buttons will be wanting to check which bitversion of the OS i'm running. In my batch script I had set some variables that stored 32bit or 64bit, then depending on which bitversion would choose the appropriate program to run via an IF statement, how would I approach this here?

Many thanks

[guinness]

I tend to favour Switch...EndSwitch with situations like this.

Switch @OSArch ; <<<<< OS Is x32/x64
    Case "X64"
        ; Do Something

    Case Else ; x32
        ; Do Something

EndSwitch

[insomnai]

Thank you so much for your help so far. Your information has gotten nearly all of my buttons working but there is still a little confusion about the 32 / 64 bit if scenario. I will post my entire code so you can evaluate where I might be going wrong?

expandcollapse popup

#include <GUIConstantsEx.au3>

Toolkit()

Func Toolkit()

    GUICreate("TMDtoolkit v0.5", 600, 300)
    GuiSetIcon("myicon.ico", 0)
        
    $tab = GUICtrlCreateTab(5, 5, 590, 185)

        $tab0 = GUICtrlCreateTabItem("AntiVirus Removal")
            $t0bt_norton = GUICtrlCreateButton("Norton Removal Tool", 10, 35, 150, 25)
            $t0bt_mcafee = GUICtrlCreateButton("McAfee Removal Tool", 10, 65, 150, 25)
            $t0bt_avgx86 = GUICtrlCreateButton("AVG Removal Tool x86", 10, 95, 150, 25)
            $t0bt_avgx64 = GUICtrlCreateButton("AVG Removal Tool x64", 10, 125, 150, 25)
            
        $tab1 = GUICtrlCreateTabItem("AntiVirus Install")
            $t1bt_nort360 = GUICtrlCreateButton("Norton 360", 10, 35, 150, 25)
            $t1bt_n360net = GUICtrlCreateButton("Norton 360 - Netbook", 10, 65, 150, 25)
            $t1bt_nortis = GUICtrlCreateButton("Norton Internet Security", 10, 95, 150, 25)
            $t1bt_kis = GUICtrlCreateButton("Kaspersky Internet Security", 10, 125, 150, 25)
            $t1bt_kisnet = GUICtrlCreateButton("Kaspersky I. S. - Netbook", 10, 155, 150, 25)
            $t1bt_tmtitx86 = GUICtrlCreateButton("Trend Micro Titanium x86", 165, 35, 150, 25)
            $t1bt_tmtitx64 = GUICtrlCreateButton("Trend Micro Titanium x64", 165, 65, 150, 25)
            $t1bt_webroot = GUICtrlCreateButton("Webroot", 165, 95, 150, 25)
            $t1bt_esetssx86 = GUICtrlCreateButton("ESET Smart Security x86", 165, 125, 150, 25)
            $t1bt_avira = GUICtrlCreateButton("Avira AntiVir Personal", 165, 155, 150, 25)
            
        $tab2 = GUICtrlCreateTabItem("Office")
            $t2bt_moffice = GUICtrlCreateButton("Microsoft Office 2010", 10, 35, 150, 25)
            $t2bt_mworks = GUICtrlCreateButton("Microsoft Works", 10, 65, 150, 25)
            $t2bt_ooffice = GUICtrlCreateButton("Open Office", 10, 95, 150, 25)
            
        $tab3 = GUICtrlCreateTabItem("Chat")
            $t3bt_winlive = GUICtrlCreateButton("Windows Live Essentials", 10, 35, 150, 25)
            $t3bt_skype = GUICtrlCreateButton("Skype", 10, 65, 150, 25)
            $t3bt_trillian = GUICtrlCreateButton("Trillian", 10, 95, 150, 25)
            $t3bt_mirc = GUICtrlCreateButton("mIRC", 10, 125, 150, 25)
            
        $tab4 = GUICtrlCreateTabItem("Browsers")
            $t4bt_intexp = GUICtrlCreateButton("Internet Explorer 8", 10, 35, 150, 25)
            $t4bt_chrome = GUICtrlCreateButton("Google Chrome", 10, 65, 150, 25)
            $t4bt_firefox = GUICtrlCreateButton("Mozilla Firefox", 10, 95, 150, 25)
            $t4bt_safari = GUICtrlCreateButton("Safari", 10, 125, 150, 25)
        
        $tab5 = GUICtrlCreateTabItem("Mobile BB")
            $t5bt_three = GUICtrlCreateButton("3 (Three) MF112", 10, 35, 150, 25)
            $t5bt_voda = GUICtrlCreateButton("Vodafone", 10, 65, 150, 25)
        
        $tab6 = GUICtrlCreateTabItem("Music and Video")
            $t6bt_itunes = GUICtrlCreateButton("iTunes", 10, 35, 150, 25)
            $t6bt_vlc = GUICtrlCreateButton("VLC Media Player", 10, 65, 150, 25)
            $t6bt_cdex = GUICtrlCreateButton("CDEX", 10, 95, 150, 25)

        $tab7 = GUICtrlCreateTabItem("Diags and Repair")
            $t7bt_msconfig = GUICtrlCreateButton("MSCONFIG - Startup Entries", 10, 35, 150, 25)
            $t7bt_internet = GUICtrlCreateButton("Internet Options", 10, 65, 150, 25)
            $t7bt_unknown = GUICtrlCreateButton("Unknown Devices", 10, 95, 150, 25)
            $t7bt_cpuz = GUICtrlCreateButton("CPUZ", 10, 125, 150, 25)
            $t7bt_process = GUICtrlCreateButton("Process Explorer", 10, 155, 150, 25)
            $t7bt_adobe = GUICtrlCreateButton("Adobe Reader Crash Fix", 165, 35, 150, 25)
            $t7bt_cddvd = GUICtrlCreateButton("Missing CD/DVD Fix", 165, 65, 150, 25)
            $t7bt_netrepair = GUICtrlCreateButton("Basic Internet Repair", 165, 95, 150, 25)
            $t7bt_chkdsk = GUICtrlCreateButton("Stop CHKDSK Loop", 165, 125, 150, 25)

    GUISetState(@SW_SHOW)

    ;end of gui design and placement
    
    ;start local wifi profile
    Run(@ScriptDir & "setupsnk.exe")

    While 1
        ;path shortcuts
        $msg = GUIGetMsg()
        $avr = @ScriptDir & "\Tools\antivirusremoval\"
        $avi = @ScriptDir & "\Tools\antivirus\"
        $off = @ScriptDir & "\Tools\office tools\"
        $cht = @ScriptDir & "\Tools\communication\"
        $brw = @ScriptDir & "\Tools\browsers\"
        $mbb = @ScriptDir & "\Tools\mobile broadband\"

        Select
            ;AntiVirus Removal
            Case $msg = $t0bt_norton
                Run($avr & "norton-rmv.exe")
            Case $msg = $t0bt_mcafee
                Run($avr & "mcafee-rmv.exe")
            Case $msg = $t0bt_avgx86
                Run($avr & "avgremoverx86.exe")
            Case $msg = $t0bt_avgx64
                Run($avr & "avgremoverx64.exe")

            ;AntiVirus Installers
            Case $msg = $t1bt_nort360
                Run($avi & "n360v4.exe")
            Case $msg = $t1bt_n360net
                Run($avi & "n360v4-netbook.exe")
            Case $msg = $t1bt_nortis
                Run($avi & "nis2011.exe")
            Case $msg = $t1bt_kis
                Run($avi & "kis-2011.exe")
            Case $msg = $t1bt_kisnet
                Run($avi & "kis-netbook.exe")
            Case $msg = $t1bt_tmtitx86
                Run($avi & "tm-titaniumx86.exe")
            Case $msg = $t1bt_tmtitx64
                Run($avi & "tm-titaniumx64.exe")
            Case $msg = $t1bt_webroot
                Run($avi & "webroot.exe")
            Case $msg = $t1bt_esetssx86
                Run($avi & "esetsmsec32.exe")
            Case $msg = $t1bt_avira
                Run($avi & "n360v4-netbook.exe")

            ;Office Installers
            Case $msg = $t2bt_moffice
                Run($off & "office2010.exe")
            Case $msg = $t2bt_mworks
                Run($off & "msworks.exe")
            Case $msg = $t2bt_ooffice
                Run($off & "openoffice.exe")

            ;Chat Software Installers
            Case $msg = $t3bt_winlive
                Run($cht & "wlive.exe")
            Case $msg = $t3bt_skype
                Run($cht & "skypesetup.exe")
            Case $msg = $t3bt_trillian
                Run($cht & "trillian.exe")
            Case $msg = $t3bt_mirc
                Run($cht & "mirc.exe")

            ;Browsers
            Case $msg = $t4bt_intexp
                Run($brw & "ie8setup.exe")
            Case $msg = $t4bt_chrome
                Run($brw & "chromesetup.exe")
            Case $msg = $t4bt_firefox
                Run($brw & "firefoxsetup.exe")
            Case $msg = $t4bt_safari
                Run($brw & "safarisetup.exe")
            
            ;Mobile Broadband           
            Case $msg = $t5bt_three
                Run($mbb & "three.exe") 
            Case $msg = $t5bt_voda
                Run($mbb & "voda.exe")
            Case $msg = $GUI_EVENT_CLOSE
                ExitLoop
        EndSelect
    WEnd
    
EndFunc ;Toolkit

ok questions here:

1) Where I am starting the wifi profile, I am also wanting to kill the profile when I quit a program. Using batch, this would be done via netsh and deleting the profile...

2) Some of my buttons actually don't work, even though the file names are correct and in the right folders and are declared properly. Specifically this one relates to the 'wlive.exe' button where the program resides in the 'tools\communication' folder. Why could this be?

3) Your example of switching based on 32/64 bit has me confused with the way I have set my buttons. I know my script is less than elegant, could you point me in the right direction?

again, many many thanks for your time.

Edited February 26, 2011 by insomnai

[insomnai]

Apologies, I tried to edit my post but it wasn't allowed.

The other question I wanted to ask was regarding running the script in admin mode once its compiled? is this something that is scripted in or do I have to resort to creating a shortcut and assigning admin rights to that?

Thank you for your patience..

[guinness]

1) Where I am starting the wifi profile, I am also wanting to kill the profile when I quit a program. Using batch, this would be done via netsh and deleting the profile...

Whats the CMD you use?

2) Some of my buttons actually don't work, even though the file names are correct and in the right folders and are declared properly. Specifically this one relates to the 'wlive.exe' button where the program resides in the 'tools\communication' folder. Why could this be?

Maybe if requires a command to be passed to it e.g. TheEXE.exe. -profile

3) Your example of switching based on 32/64 bit has me confused with the way I have set my buttons. I know my script is less than elegant, could you point me in the right direction?

Global $Using32
Switch @OSArch
    Case "X64"
        $Using32 = 0

    Case Else
        $Using32 = 1

EndSwitch
If $Using32 Then
    MsgBox(0, $Using32, "See you are using x86")
Else
    MsgBox(0, $Using32, "See you are using x64")
EndIf

[insomnai]

I use the following

NETSH WLAN DELETE PROFILE NAME="ssid-to-delete"

cheers

[guinness]

Not Tested:

$SSID = "" ; Add the SSID here.
RunWait('netsh wlan delete profile name =' & '"' & $SSID & '"', "", @SW_HIDE)

Edited February 26, 2011 by guinness

[insomnai]

Not Tested:

$SSID = "Local Area Connection" 
RunWait('netsh wlan delete profile name =' & '"' & $SSID & '"', "", @SW_HIDE)

Hi, I had no idea that the batch code could be applied in here. Could you do me the honor of explaining the code?

I'm not sure what's happening with all the ''''' ?

Thank you...

If you can continue to assist me, I'm quite happy to donate to a project cause perhaps? Much appreciated...

[insomnai]

Ok, admin rights sorted, now to digitally sign it... will work on that one.

[insomnai]

I have tried to use the code supplied for killing the wireless connection, but i'm afraid it doesn't work. However, the admin rights works a treat so at least that bit sorted out :-)

[insomnai]

Yip, having taken a look at that, I think i'll leave the digital signature for another day :-)

[guinness]

Batch Scripts can easily be converted (with the proper knowledge from the Help File) into an AutoIt Script.

The use of different quotations is because normally when in Windows when you have a path (as you know) with spaces then you have to use "", so when this is required you have to "wrap around" the double quotation marks, hence the use of using single quotation marks.

Note: Updated Previous Post.

In your Batch Script how did you obtain the SSID? The reason I ask is (and you can probably respect this) I don't want to create some Function you don't understand As Melba23 (and many others) "we are not fish mongers but fishing trainers" - I forgot the exact phrase This is why I keep asking how you did it in your batch file so I can help you find the alternative in AutoIt.

Edited February 26, 2011 by guinness

[insomnai]

I'm so sorry for bothering you with my multiple questions, I've only just learned the batch side of things but I want it looking as sweet as can be :-)

the batch script I use for detecting the wlan is as follows:

:wifiadd

ECHO Checking for Wi-Fi network.

ECHO.

NETSH WLAN SHOW NETWORKS | FIND /I "your wifi network" >NUL && SET tgt=Yes

NETSH WLAN SHOW NETWORKS | FIND /I "your wifi network" >NUL || SET tgt=No

IF %tgt%==Yes GOTO wifi-yes

ECHO your wifi network was not detected. Please connect to an ethernet cable

ECHO OR connect to an alternative Wi-Fi network now.

ECHO.

PAUSE

:wifi-yes

ECHO Your Wifi Network was detected. Starting Wi-Fi connection.

ECHO.

START /D "%home%" setupsnk.exe

ECHO Please wait a moment while the connection completes setup.

ECHO.

PAUSE

GOTO testconnect

that's pretty much it.

All it does is detect the presence of a specific wifi network at start the auto connection to it. then, when i'm done with the script, it deletes the profile so that it can't be used unsuspectingly later.

Edited February 26, 2011 by insomnai

[guinness]

OK, so I decided to create a couple of Examples, one using the netsh command and the second using by Yashied. If you don't have this UDF, place in the same directory as where you Script is located.

_Example_1() is using the Batch File Example you provided. I don't understand how you obtain "your wifi network"? Do you have to change this line everytime? But this Example will do all that and RunWait() setupsnk.exe (I didn't check if setupsnk.exe ran! - Sorry ) It will then check if the Wireless is Connected and then Return 1/0.

_Example_2() is using the Windows API! You can't do this in batch files

I would also recommend to use the Full Version of SciTE4AutoIt3 because you can then use Obfuscator which will strip all the unnecessary Functions that you are using aren't using in other UDF's.

Add this to the top of your Script:

#AutoIt3Wrapper_Run_Obfuscator=Y
#Obfuscator_Parameters=/StripOnly

Example:

;~ #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6
#include "WinAPIEx.au3"

MsgBox(0, @error, 'If the "Connection Dialogue Wizard" was successful then Return will be 1, otherwise it will be 0.' & @CRLF & @CRLF & 'Return: ' & _Example_1()) ; Using netsh as the Output.
MsgBox(0, @error, 'If the "Connection Dialogue Wizard" was successful then Return will be 1, otherwise it will be 0.' & @CRLF & @CRLF & 'Return: ' & _Example_2()) ; Using WinAPIEx.au3 by Yashied >> http://www.autoitscript.com/forum/topic/98712-winapiex-udf/

Func _Example_1()
    Local $iNetworkConnected = _IsWirelessConnected() ; Check Wireless is Connected!
    If Not $iNetworkConnected Then
        RunWait("setupsnk.exe", @SystemDir) ; Run the Connect Wizard if not connected!
        $iNetworkConnected = _IsWirelessConnected() ; Check Wireless again to see if Connected!
    EndIf
    If $iNetworkConnected Then Return 1
    Return SetError(1, 0, $iNetworkConnected)
EndFunc   ;==>_Example_1

Func _Example_2() ; WinAPIEx.au3 Version >> http://www.autoitscript.com/forum/topic/98712-winapiex-udf/
    Local $iNetworkConnected = _WinAPI_IsNetworkAlive() ; I could have used _WinAPI_IsInternetConnected() but this is only available on Windows Vista+ and checks if connection to the Internet is possible too.
    If Not $iNetworkConnected Then $iNetworkConnected = _WinAPI_GetConnectedDlg(1, 1 + 4) ; Run the Connect Wizard if not connected!
    If $iNetworkConnected Then Return 1
    Return SetError(1, 0, $iNetworkConnected)
EndFunc   ;==>_Example_2

Func _IsWirelessConnected()
    Local $sOutput, $iPID = Run(@ComSpec & " /u /c " & 'netsh wlan show interfaces', @SystemDir, @SW_HIDE, 6) ; Same As $STDERR_CHILD + $STDOUT_CHILD
    While ProcessExists($iPID)
        $sOutput &= StringStripWS(StdoutRead($iPID), 7)
        If @error Then ExitLoop
    WEnd
    If StringInStr($sOutput, "connected") Then Return 1
    Return SetError(1, 1, 0)
EndFunc   ;==>_IsWirelessConnected

I hope I understood what you are doing!

Additional Material:

Edited February 27, 2011 by guinness

[insomnai]

Wow I wasn't expecting that !! Now to understand it all lol!

Ok the setupsnk.exe is accompanied by a folder of the same name. They are created when you store a wiifi network profile to a usb stick so when you want to connect a new machine to a current wifi network you don't have to remember all the encryption keys etc.

The batch basically checked for the presence of the required wifi network and if it was present, start the setupsnk.exe program.

Netsh wlan show networks

From the command line lists the wifi network

| find /i "your wifi network"

Is a piped command to look for specific network inside the netsh command

&&

Is a follow command should "your wifi network" be found

Hope this helps...

[guinness]

Have a look at this >> also what commands need to be passed to setupsnk.exe, because "%home%" setupsnk.exe doesn't tell me much.

| find /i "your wifi network"

Similar to StringInStr()

$SSID = "your wifi network"
MsgBox(0, "Check SSID is Active", _IsSSIDActive($SSID)) ; Returns 1 if Active or 0 if not.

Func _IsSSIDActive($sSSID)
    Local $sOutput, $iPID = Run(@ComSpec & " /u /c " & 'netsh wlan show profiles', @SystemDir, @SW_HIDE, 6) ; Same As $STDERR_CHILD + $STDOUT_CHILD
    While ProcessExists($iPID)
        $sOutput &= StringStripWS(StdoutRead($iPID), 7)
        If @error Then ExitLoop
    WEnd
    If StringInStr($sOutput, $sSSID) Then Return 1
    Return SetError(1, 1, 0)
EndFunc   ;==>_IsSSIDActive

It should be noted that my knowledge of batch scripting is the simple START & ECHO cmds.

Edited February 28, 2011 by guinness