Search the Community

Function Reference _AutoItErrorTrap.au3 UDF to intercept the error window of AutoIt, showing more details about the error, including ability to save and send by email! (Detection and treatment of errors in the AutoIt scripts!) Sintax: ; Adding the directives below, will cause your program be compiled with the indexing of the original lines shown in SciTE: #AutoIt3Wrapper_Run_Before=ShowOriginalLine.exe %in% #AutoIt3Wrapper_Run_After=ShowOriginalLine.exe %in% ;Or you can use the program "ShowOriginalLine.exe" directly and choose the script you want to add support to show the original lines! #include "_AutoItErrorTrap.au3" ; _AutoItErrorTrap ([sTitle [, sText [, fUseCallBack]]]) _AutoItErrorTrap()Supports: ;Error detection in your AutoIt script and local #Includes! ;According to the AutoIt Help, the definition for "local Includes" is: ;------------------------------------------------------------------------------ ;If "..." is used, the filename is taken to be relative to the current script. ;------------------------------------------------------------------------------ ;This means that for you to have your UDF or other external module with support to show the original lines, one should use as follows: #include "[path] filename" ; See the AutoIt help for more details.Downloads: Version: 0.11 _AutoItErrorTrap_(RedirectLink).html Note: The error detection is performed in the same executable, does not requiring opening two .exes for this action! Works with CUI too. Usage example is included! (You need to compile first, but it also work with non compiled scripts using context menu [Run Script...]) Sample: More sample: Fixes: #ShowLine_Off $hForm = GUICreate("My GUI menu", 480, 360) $iFileMenu = GUICtrlCreateMenu("&File") $iFileItem = GUICtrlCreateMenuItem("Open", $iFileMenu) GUICtrlSetState(-1, $GUI_DEFBUTTON) $iHelpMenu = GUICtrlCreateMenu("?") GUICtrlCreateMenuItem("Save", $iFileMenu) GUICtrlSetState(-1, $GUI_DISABLE) #ShowLine_OnWithout them the rows above would be as follows: $__iLineNumber=1 & " - " & '$hForm = GUICreate("My GUI menu", 480, 360)...' $hForm = GUICreate("My GUI menu", 480, 360) $__iLineNumber=3 & " - " & '$iFileMenu = GUICtrlCreateMenu("&File")' $iFileMenu = GUICtrlCreateMenu("&File") $__iLineNumber=4 & " - " & '$iFileItem = GUICtrlCreateMenuItem("Ope...' $iFileItem = GUICtrlCreateMenuItem("Open", $iFileMenu) $__iLineNumber=5 & " - " & 'GUICtrlSetState(-1, $GUI_DEFBUTTON)' GUICtrlSetState(-1, $GUI_DEFBUTTON) $__iLineNumber=6 & " - " & '$iHelpMenu = GUICtrlCreateMenu("?")' $iHelpMenu = GUICtrlCreateMenu("?") $__iLineNumber=7 & " - " & 'GUICtrlCreateMenuItem("Save", $iFileMenu)' GUICtrlCreateMenuItem("Save", $iFileMenu) $__iLineNumber=8 & " - " & 'GUICtrlSetState(-1, $GUI_DISABLE)' GUICtrlSetState(-1, $GUI_DISABLE) And the directive #ShowOriginalLine_Param with the following options: /SV or /SkipAllVars ; Skip all Variables to show original line numbers. /SG or /SkipGlobalVars ; Skip Global Variables to show original line numbers. /SL or /SkipLocalVars ; Skip Local Variables to show original line numbers.29/10/2012 -> *Adding the directives below, will cause your program be compiled with the indexing of the original lines shown in SciTE: #AutoIt3Wrapper_Run_Before=ShowOriginalLine.exe %in% #AutoIt3Wrapper_Run_After=ShowOriginalLine.exe %in%*Or you can use the program ShowOriginalLine.exe directly and choose the script you want to add support to show the original lines!*It was added #region Translations with the variables available for translation! 0.10.2312.2600b 25/10/2012 -> Added support for viewing the last screen before the error! Now the window can expand and retract again...Change the hook CALLWNDRETPROC to CALLWNDPROC (better...). Added a help button [?] In the main window and minor changes in the code. 0.10.2312.2600b 23/10/2012 -> *Added support to display the original line numbers in the scripts compiled! Thanks to @FireFox for this tip! $hAET_GETERROR = StringRegExpReplace($hAET_GETERROR, "d+[0-9]", Eval("__iLineNumber") & @CRLF)*Additional information suggested by @ricky03, thank you!*Some bugs were fixed and the file ShowOriginalLineNumbers.au3 was added in zip file. 0.10.2112.2600b 21/10/2012 -> Bugs were fixed and a few functions have been rewritten!0.10.1912.2600b 19/10/2012 -> The UDF was almost completely rewritten, now no longer need to include _AdlibEnhance.au3.The detection of error is instant and does not consume more CPU. Interface compatibility with Windows XP 0.10.1812.2600b 18/10/2012 -> Improvements such as icons on the buttons and added a button to save the error information!0.10.1712.2600b 17/10/2012 -> First release!Regards, João Carlos.

ciao I have a Delphi compiled program that I use for work and I can read some logs with this function: Func __ReadExternalListBox() Local $hListBox, $iItemCount $hListBox = ControlGetHandle("Software Setup", "", "[CLASS:TListBox; INSTANCE:1]") ConsoleWrite("$hListBox = " & $hListBox & @CRLF) $iItemCount = _GUICtrlListBox_GetCount($hListBox) For $i = $iStart To $iItemCount - 1 ConsoleWrite(GUICtrlListBox_GetText($hListBox,$i) & @CRLF) Next EndFunc ;==>__ReadExternalListBox I can find pid and full path of the process. The problem is when I must open another process: I can't read the new ListBox because the title of the window to read is the same and the function $hListBox = ControlGetHandle("Software Setup", "", "[CLASS:TListBox; INSTANCE:1]") return me only one handle. With Autoinfo I can read handle: is, for this instance, 0x0001099C and is $hListBox But I need to automize some function and I can't always change in runtime this values. Ideas? Is there e method to read this title windows associated to a determined pid? PS: I don't need the handle from the pid windows application, but from its control if I use _WinAPI_EnumProcessWindows() the function return me window handle, not Control handle I In this case Windows Handle is 0x001007DA but I need Control Handle that is 0x0001099C Thankyou Marco

I'm trying to call WinList() with a handle. That should be possible: But I only get back an 2d array that looks like this: --------- 0 | (That means no window was found.) It's not the window or the handle. When I call other functions like WinExists() or WinGetHandle() it works. Is it because of me, the description in the reference or because of Autoit who makes a mistake? No, because of the rest of my program I don't want to use WinGetTitle() because the format of WinList() has to be kept. Alternatively, I could create a 2d array myself, but it should also work with WinList() ... I hope.

Hello, Either drag drop the opened file on the server and the temp file, Aut2Exe could not copy to the destination file, as that one is opened, to the edits of this GUI, or take the Aut2Exe error message line to your clipboard, the line will be split automatically. This script does not check For the required rights to the destination folder (to close open file handles) for correct input Use either clipboard (Aut2Exe message), drag & drop, or copy the full paths of source and destination file *IN ONE* (don't type, if you want to do so, modify the script, for me it's fine this way ;-) Example Error Message: !>11:19:15 Problem copying file from: C:\Users\UserName\AppData\Local\AutoIt v3\Aut2exe\~AU98E6.tmp.exe To :z:\MyAutoitExeForTheUsers.exe #include <GUIConstantsEx.au3> #include <NetShare.au3> #include <WindowsConstants.au3> #include <Array.au3> #include <EditConstants.au3> ; Enumerate open files on the server $DragDropOpenFile = "<drag drop the opened file on a server share here>" $DragDropNewFile = "<drag drop the file supposed to replace the above one here>" $NewFile = "" $Gui_h = 250 $Gui_w = 800 $vDist = 7 ; GUICreate($GuiTitle, $w, $h, @DesktopWidth - $w - 100, @DesktopHeight - $h - 60, -1, $WS_EX_ACCEPTFILES) ; generally enable drag-drop for files into other GUI controls $myGui = GUICreate("Tool to forcibly close & replace open files on server shares", $Gui_w, $Gui_h, 100, 100, -1, $WS_EX_ACCEPTFILES) $InputFileToClose = GUICtrlCreateInput($DragDropOpenFile, 20, $vDist, $Gui_w - 40, 20) GUICtrlSetState(-1, $GUI_DROPACCEPTED) ; allow drag-droping files for this control, $InputFile Opt("Guicoordmode", 2) $InputFileNew = GUICtrlCreateInput($DragDropNewFile, -1, $vDist) GUICtrlSetState(-1, $GUI_DROPACCEPTED) ; allow drag-droping files for this control, $InputFile GUICtrlSetState(-1, $GUI_DISABLE) $lServer = GUICtrlCreateLabel("<server>", -1, $vDist) $lShare = GUICtrlCreateLabel("<share-mapping>", -1, $vDist) $lPath = GUICtrlCreateLabel("<sub-path>", -1, $vDist) $lFile = GUICtrlCreateLabel("<file>", -1, $vDist) $doit = GUICtrlCreateButton("Search and close for open file handles", -1, $vDist) GUICtrlSetState(-1, $GUI_DISABLE) $exit = GUICtrlCreateButton("Cancel", -1, $vDist) GUISetState() $FN = False $FNnew = "" $FNmatch = False $ToolTitle = "" $ToolTxt = "" $RegExA2E = "(?i)^(?:.*?Problem copying file from: )(.*?)(?: To :)(.*$)" ; $1 = compiled local TEMP file, $2 = not replacable destination file ; Examle Replacement failed output: !>11:19:15 Problem copying file from: C:\Users\USERNAME\AppData\Local\AutoIt v3\Aut2exe\~AU98E6.tmp.exe To :z:\MyAutoitExeForTheUsers.exe While 1 $Clip = ClipGet() If StringRegExp($Clip, $RegExA2E) Then $Src = StringRegExpReplace($Clip, $RegExA2E, "$2") GUICtrlSetData($InputFileToClose, $Src) $Dst = StringRegExpReplace($Clip, $RegExA2E, "$1") GUICtrlSetData($InputFileNew, $Dst) EndIf $input = GUICtrlRead($InputFileToClose) If $input <> $DragDropOpenFile Then ; da wurde was reingezogen $DragDropOpenFile = $input If StringLeft($input, 2) = "\\" Then $Type = "UNC" $ServerShareUNC = StringLeft($input, StringInStr($input, "\", 0, 4) - 1) $fRelPathFN = StringReplace($input, $ServerShareUNC, "") $fPath = StringLeft($fRelPathFN, StringInStr($fRelPathFN, "\", 0, -1)) $FN = StringTrimLeft($fRelPathFN, StringInStr($fRelPathFN, "\", 0, -1)) ElseIf StringMid($input, 2, 1) = ":" Then ; Pfad mit Laufwerksbuchstabe, evtl. Netzwerk Mapping (erforderlich) $drive = StringLeft($input, 2) $Type = DriveGetType($drive) If $Type = "Network" Then $ServerShareUNC = DriveMapGet($drive) $foo = StringReplace($input, $drive, $ServerShareUNC) ; Laufwerkspfad in UNC Pfad umwandeln $fRelPathFN = StringReplace($foo, $ServerShareUNC, "") $fPath = StringLeft($fRelPathFN, StringInStr($fRelPathFN, "\", 0, -1)) $FN = StringTrimLeft($fRelPathFN, StringInStr($fRelPathFN, "\", 0, -1)) Else MsgBox(48, @ScriptLineNumber, "This script can *ONLY* close remotely handles for files open on server shares!" & @CRLF & _ $input & @CRLF & _ $drive & " = " & $Type) ContinueLoop 2 EndIf EndIf $Server = StringLeft($ServerShareUNC, StringInStr($ServerShareUNC, "\", 0, 3) - 1) $Share = StringTrimLeft($ServerShareUNC, StringInStr($ServerShareUNC, "\", 0, 3) - 1) GUICtrlSetData($lServer,"Server = '" & $Server& "'") GUICtrlSetData($lShare, "Mapping = '" & $Share & "'") GUICtrlSetData($lPath, "SubPath = '" &$fPath & "'") GUICtrlSetData($lFile, "FileName= '" & $FN &"'") GUICtrlSetState($doit, $GUI_ENABLE) GUICtrlSetState($InputFileNew, $GUI_ENABLE) EndIf If $NewFile <> GUICtrlRead($InputFileNew) Then $NewFile = GUICtrlRead($InputFileNew) If $NewFile <> $DragDropNewFile Then If StringInStr($NewFile, $DragDropNewFile) Then $NewFile = StringReplace($NewFile, $DragDropNewFile, "") GUICtrlSetData($InputFileNew, $NewFile) EndIf $FNnew = StringTrimLeft($NewFile, StringInStr($NewFile, "\", 0, -1)) If $FN = $FNnew Then If $FNmatch = False Then $FNmatch = True GUICtrlSetData($doit, "Search for & Close open file handles, then replace file") EndIf Else If $FNmatch Then $FNmatch = False GUICtrlSetData($doit, "Search for & Close open file handles, then replace file") GUICtrlSetData($InputFileNew, $DragDropNewFile) EndIf EndIf EndIf EndIf Switch GUIGetMsg() Case $exit, $GUI_EVENT_CLOSE GUIDelete($myGui) Exit Case $doit AbArbeiten($Server, $Share, $fPath, $FN) EndSwitch WEnd Func AbArbeiten($_Srv, $_Shr, $_fPth, $_fNme) Local $iID = 0 Local $iRights = 1 Local $iLckCount = 2 Local $iFPFN = 3 Local $iUser = 4 ConsoleWrite($_fPth & $_fNme & @CRLF) Local $aFile = _Net_Share_FileEnum($_Srv) If IsArray($aFile) Then ; _ArrayDisplay($aFile) Local $x $ToolTxt = "Open File Handles:" $ToolTitle = "Handles to be checked total: " & $aFile[0][0] UpdateToolTip() AdlibRegister(UpdateToolTip, 1000) For $x = $aFile[0][0] To 1 Step -1 $ToolTitle = $x & " handles remaining for checking..." If Not StringInStr($aFile[$x][$iFPFN], $_fPth & $_fNme) Then ; ConsoleWrite("Nix Enthalten in: " & $aFile[$x][$iFPFN] & @CRLF) _ArrayDelete($aFile, $x) Else $ToolTxt &= @CRLF & $aFile[$x][$iFPFN] & ", User = " & $aFile[$x][$iUser] ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $ToolTxt = ' & $ToolTxt & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console EndIf Next $aFile[0][0] = UBound($aFile) - 1 _ArraySort($aFile, 0, 1, 0, $iUser) ; _ArrayDisplay($aFile, $aFile[0][0] & " FileLocks found.") If $aFile[0][0] = 0 Then $ToolTitle = "Done, no open file handles were found" $ToolTxt &= @CRLF & ", no handles to be closed for this file!" Sleep(2000) $ToolTxt = "" ReplaceFile() Else $ToolTitle = $aFile[0][0] & " open file handles were found..." $CloseErr = 0 For $x = 1 To $aFile[0][0] If _Net_Share_FileClose($Server, $aFile[$x][$iID]) Then $ToolTxt &= @CRLF & @TAB & "Handle closed: " & $aFile[$x][$iID] Else $ToolTxt &= @CRLF & "ERROR: Handle Close Failed! --> " & $aFile[$x][$iFPFN] & ", User = " & $aFile[$x][$iUser] $CloseErr += 1 EndIf Next ConsoleWrite('@@ Debug(' & @ScriptLineNumber & ') : $CloseErr = ' & $CloseErr & @CRLF & '>Error code: ' & @error & @CRLF) ;### Debug Console If $CloseErr = 0 Then $ToolTitle = "All found open file handles could be closed." ReplaceFile() Else $ToolTitle = $CloseErr & " Handles could *NOT* be closed!" Sleep(2000) EndIf Sleep(1000) $ToolTxt = "" $ToolTitle = "" EndIf Else MsgBox(0, "not an array", $aFile & @CRLF & @error & @CRLF & @extended & @CRLF & _ "Unable to retrieve the array of open file handles for " & $Share) EndIf EndFunc ;==>AbArbeiten Func UpdateToolTip() ToolTip($ToolTxt, MouseGetPos(0) + 20, MouseGetPos(1) + 20, $ToolTitle) ; ConsoleWrite( $ToolTxt & @CRLF & $ToolTitle & @CRLF & "-------------------" & @CRLF) EndFunc ;==>UpdateToolTip Func ReplaceFile() If FileExists($NewFile) Then If FileCopy($NewFile, $input, 1 + 8) Then $ToolTitle = "File successfully replaced." $ToolTxt = "Done" Else $ToolTitle = "File could *NOT* be replaced." $ToolTxt = "Possibly another open file handle spawned while this script was running." & @CRLF & _ "Simply start over again, please." MsgBox(48, $ToolTitle, $ToolTxt) EndIf EndIf EndFunc ;==>ReplaceFile

Hello, I have the below toolbar which has buttons that are not visible for the Window Info tool. So, in order to be able to click on those buttons, I searched the forum and found the below script which returns all controls for a given window. Now that I know the data of the buttons I tried to use the below commands to click a button. Without any success : ;Using the ClassNN ControlClick($HDL, "", "[ClassNN:WindowsForms10.COMBOBOX.app.0.33c0d9d2]") ; Using the button handle ControlClick($HDL, "", 0x001205E2) ; trying to go through the array and select the desired button #include <Functions.au3> #include <Array.au3> $HDL = WinWait("GNB_L_Ro") WinActivate($HDL) $ControlList = _GetAllWindowsControls($HDL) Sleep(1000) ControlClick($HDL, "", $ControlList[37][2]) _ArrayDisplay($ControlList) ;_GetAllWindowsControls function is defined in Functions.au3 and contains the script from the above link.  Any suggestions on how to click one of those buttons? Any help is more than appreciated. Thank you!

I want to click on a button that is inside a custom ToolBar on a nonAutoIT created form. I've been using MouseClick but that fails if the toolbar is detached or if the form is resized. There is no ID associated with the toolbar but there is a handle. I'm thinking that to get the handle I need a ControlID but that only gets me to the toolbar and I'd then need to have a way to identify the position of a button in order to click on it. I'd found a discussion about identifying the position of a noname button by, I believe, it's Tip text back in December but I can't find it now. Memory is a bit fuzzy on how I even got to the topic because at the time I was searching for something else. I'll continue to search but if anyone has seen the topic, or knows of another solution could you please point me in that direction. Thank you.

The problem with not knowing the answer is not knowing the correct question to ask to find the answer. This is the exact predicament that I find myself at this moment so I will do my best to put order to some abstract thoughts. Given the function ControlGetHandle by definition retrieves the internal handle of a control. Let’s assume for the sake of argument that I have turned off UAC on both my test system and my problem system and that both systems are Windows 7 x86.That regardless of whether I have #RequireAdmin at the beginning of my script, that the results are the same on my test system. That the lines of code that I am having difficulty with are as follows $d = 0 Do $TestX = ControlFocus("Pxl", "Database has expired for", "Button1") $TestXa = ControlGetHandle("Pxl", "Database has expired for", "Button1") If $TestXa <> 0 Then ControlClick("Pxl", "Database has expired for", "Button1") Sleep(2000) EndIf $d = $d + 1 Until $d = 7What I am seeing happen is that on a test system, this works and I am able to interact with this button. However, if I take this same code to another system that has this client software installed, I cannot. I checked to see what was going on by doing the following: $Hope=WinExists("Pxl", "Database has expired for") MsgBox(0,"","If equals one window can be seen = " & $Hope) MsgBox(0,"",WinGetText("Pxl", "Database has expired for"))The result was a zero with no text being returned on the problem system. I then had the client software uninstalled and reinstalled making sure that elevated permissions were used. Following the reinstall, WinExists returned a 1, the text was returned, and the automation was successful. Sunshine, puppies and unicorns all day long. Two days later, on this same system, WinExists went back to being a zero for some unexplained reason. After doing an uninstall / reinstall routine again, WinExists still returns a zero. The fairy tale ended. Part of me wants to believe that it is an issue with the client installer but the other part fails to understand why it would just stop working or why on another system of the same OS persuasion, it runs flawlessly for 5,000 executions. To take this a step farther, if I run the Client software on the problem system as an administrator, WinExists returns a 1. So what would make a control that was previously available to a standard user session suddenly only want to give up its information when run as administrator? Why would one install work for 2 days and then break? Then have another install not work? So if I am making sense to this point, I have to ask, what I am missing? I have a reliable test where neither the script nor the client application need to be run as administrator yet I have this problem on other systems. Are there other factors that would create this behavior in AutoIt other than UAC? If I wanted to search the internet to find articles on how AutoIt retrieves the handles or better yet how the handles are exposed to the user session, what would I really search for? I have looked at process explorer and I see an access column if I turn on handles but it is my understanding that this is the access that was requested at the time the handle was created and is aimed at what the control is allowed to do but not who can access the information of the control. I am guessing that this possibility of access to the handle exists as it is the only conclusion that fits with what I am seeing, or am I wrong? This last question is what drove me to ask this question in the forum as I am having no success in understanding the concept of how this happens or what to search for. Any ideas? As a side note, here is what the info tool exposes about the button: >>>> Window <<<< Title: Pxl Class: #32770 Position: 477, 412 Size: 326, 161 Style: 0x94C801C5 ExStyle: 0x00010101 Handle: 0x00200880 >>>> Control <<<< Class: Button Instance: 1 ClassnameNN: Button1 Name: Advanced (Class): [CLASS:Button; INSTANCE:1] ID: 2 Text: OK Position: 226, 96 Size: 88, 26 ControlClick Coords: 22, 14 Style: 0x50030000 ExStyle: 0x00000004 Handle: 0x00130752 >>>> Mouse <<<< Position: 728, 547 Cursor ID: 0 Color: 0xDBDBDB >>>> StatusBar <<<< >>>> ToolsBar <<<< >>>> Visible Text <<<< OK Database has expired for >>>> Hidden Text <<<< P.S. Thank you Jon for getting my access restored. V/r Casey

I am trying to send external commands to a flash player in an iframe. I need to get a handle on it in a browser opened by the $oIE.navigate method. is there a way that this can be done?

Hey ya'll. I'm making a something like the Windows 7-app Sticky-note consisting of unspecified numbers of "note"-GUIs with RichEdits in them. The problem I'm facing is that for the RichEdit to work it requires the hWnd of its GUI (which can be solved by just having a variable that's getting replaced as new "notes" are being made), but the next problem is to read the handle/ID of the RichEdit for further functions. This is what it looks like atm: #cs Unlimited, controlable windows #ce Opt("GUIOnEventMode", 1) Opt("TrayMenuMode", 1 + 2) Opt("TrayOnEventMode",1) #include <array.au3> #include <WindowsConstants.au3> #include <GUIConstantsEx.au3> #include <WinAPI.au3> #include <TrayConstants.au3> #include <GuiRichEdit.au3> TrayCreateItem("LAN-notes") TrayItemSetState(-1, $TRAY_DISABLE) TrayCreateItem("") TrayCreateItem("New") TrayItemSetOnEvent(-1, "New") TrayCreateItem("") TrayCreateItem("Exit") TrayItemSetOnEvent(-1,"TrayExit") TraySetState(1) $hWnd = GUICreate("",0,0) GUISetState(@SW_HIDE,-1) Call("New") while 1 Sleep(10) #cs $GUI_CurrentSize = WinGetPos($hGui) If $GUI_CurrentSize[2] <> $GUI_PrevSize[0] Or $GUI_CurrentSize[3] <> $GUI_PrevSize[1] Then _WinAPI_MoveWindow($Edit1,0,20,$GUI_CurrentSize[2]-20,$GUI_CurrentSize[3]-60) $GUI_PrevSize[0] = $GUI_CurrentSize[2] $GUI_PrevSize[1] = $GUI_CurrentSize[3] EndIf #ce WEnd Func New() $p = GUICreate("LAN-notes - ",200,200,Default,Default,BitOR($ws_sizebox,$WS_MINIMIZEBOX),Default,$hWnd) $winlist = WinList("LAN-notes") GUISetOnEvent($GUI_EVENT_CLOSE, "MainEvents") GUISetOnEvent($GUI_EVENT_MINIMIZE, "MainEvents") GUICtrlCreateButton("+",0,0,20,20) GUICtrlSetFont(-1,12) GUICtrlSetOnEvent(-1,"New") GUICtrlCreateButton("Save",22,0,35,20) GUICtrlSetOnEvent(-1,"Save") ;GUICtrlCreateButton("Test", 50,80) ; GUICtrlSetOnEvent(-1,"Test") GUICtrlCreateInput("",60,0,105,20) GUICtrlSetState(-1,$GUI_DISABLE) GUICtrlCreateButton("Edit",165,0,35,20) GUICtrlSetOnEvent(-1,"EditProjName") _GUICtrlRichEdit_Create($p, "",0,25,180,160, BitOR($ES_AUTOVSCROLL, $WS_VSCROLL, $ES_WANTRETURN,$ES_MULTILINE)) GUISetState() EndFunc Func Test() $winlist = WinList("LAN-notes") _ArrayDisplay($winlist) EndFunc Func MainEvents() Select Case @GUI_CtrlId = $GUI_EVENT_CLOSE If WinExists("LAN-notes") Then If MsgBox(4,"Exit?","You sure you want to close this note?") = 6 Then GUIDelete(@GUI_WinHandle) EndIf EndSelect EndFunc Func EditProjName() ConsoleWrite("Edit projName" & @CRLF) If GUICtrlGetState(@GUI_CtrlId-1) = 144 Then GUICtrlSetState(@GUI_CtrlId-1,$GUI_ENABLE) GUICtrlSetData(@GUI_CtrlId,"Done") Else WinSetTitle(@GUI_WinHandle,"","LAN-notes - " & GUICtrlRead(@GUI_CtrlId-1)) GUICtrlSetState(@GUI_CtrlId-1,$GUI_DISABLE) GUICtrlSetData(@GUI_CtrlId,"Edit") EndIf EndFunc Func Save() ConsoleWrite("--> Save" & @CRLF) ConsoleWrite(_GUICtrlRichEdit_GetText(@GUI_CtrlId+4) & @CRLF) EndFunc Func TrayExit() ConsoleWrite("TrayExit") Exit EndFunc Thanks, zvvyt

I'm trying to make a desktop wallpaper application with video support. But stuck at z-order. Any suggestions? How to put autoit window before desktop listview? I'm currently attaching window to the WorkerW. also tried the $HWND_BOTTOM const of _WinAPI_SetWindowPos but when i apply this, win goes invisible. no luck yet any help will be appreciated

Credits go to the authors of AutoIt Unlocker! #NoTrayIcon #include "WinAPIEx.au3" #include <WinAPI.au3> Dim $hTimer = TimerInit() Dim $aFiles = _ProcessListFiles("firefox.exe") ; Get a list of files currently opened by the process ConsoleWrite("+>Took " & Round(TimerDiff($hTimer)) & " milliseconds" & @CRLF) #include <Array.au3> _ArrayDisplay($aFiles) Exit Func _ProcessListFiles($vProcess, $nMaxFiles = 1000) Static Local $aPrivilege = DllCall("ntdll.dll", "int", "RtlAdjustPrivilege", "int", 20, "int", 1, "int", 0, "int*", 0) Local $nProcessId = ProcessExists($vProcess), $aRet Static Local $hCurrentProcess = _WinAPI_GetCurrentProcess() Local $aHandles = _WinAPI_EnumProcessHandles($nProcessId) Local $hObject, $aFiles[$nMaxFiles+1], $sPath Local $hProcess = _WinAPI_OpenProcess(0x0040, 0, $nProcessId, True) For $i = 1 To $aHandles[0][0] Step 1 If $aHandles[$i][3] = 0x00120189 Or $aHandles[$i][3] = 0x0012019f Or $aHandles[$i][3] = 0x00100000 Then ContinueLoop $hObject = _WinAPI_DuplicateHandle($hProcess, $aHandles[$i][0], $hCurrentProcess, 0, False, $DUPLICATE_SAME_ACCESS) If Not $hObject Then ContinueLoop If __IsFileObject($hObject) Then $sPath = __FileObjectPath($hObject) _WinAPI_CloseHandle($hObject) If FileExists($sPath) Then For $n = 1 To $aFiles[0] If $aFiles[$n] = $sPath Then $sPath = 0 ExitLoop EndIf Next If $sPath Then $aFiles[0] += 1 $aFiles[$aFiles[0]] = $sPath If $aFiles[0] >= $nMaxFiles Then ExitLoop EndIf EndIf EndIf Next ReDim $aFiles[$aFiles[0]+1] Return $aFiles EndFunc Func __IsFileObject(ByRef $hObject) Static Local $tPOTI = DllStructCreate('ushort;ushort;ptr;byte[128]'), $pData, $Length, $tString Local $aRet = DllCall("ntdll.dll", 'uint', 'NtQueryObject', 'ptr', $hObject, 'uint', 2, 'ptr', DllStructGetPtr($tPOTI), 'ulong', DllStructGetSize($tPOTI), 'ptr', 0) If @error Or $aRet[0] Then Return $pData = DllStructGetData($tPOTI, 3) If Not $pData Then Return $Length = DllCall("kernel32.dll", 'int', 'lstrlenW', 'ptr', $pData) If @error Or Not $Length[0] Then Return $Length = $Length[0] $tString = DllStructCreate('wchar[' & ($Length + 1) & ']', $pData) If @error Then Return Return (DllStructGetData($tString, 1) == "File") EndFunc Func __FileObjectPath($hObject) Static Local $tStruct = DllStructCreate("char[255];") Local $aDrive = DriveGetDrive("ALL"), $sPath Local $aDrivesInfo[UBound($aDrive) - 1][2] For $I = 0 To UBound($aDrivesInfo) - 1 $aDrivesInfo[$I][0] = $aDrive[$I + 1] DllCall("kernel32.dll", "dword", "QueryDosDevice", "str", $aDrivesInfo[$I][0], "ptr", DllStructGetPtr($tStruct), "dword", 255) $aDrivesInfo[$I][1] = DllStructGetData($tStruct, 1) Next Local Static $tPOTI = DllStructCreate("ushort Length;ushort MaximumLength;ptr Buffer;wchar Reserved[260];"), $sDeviceStr, $vSolid = False DllCall("ntdll.dll", "ulong", "NtQueryObject", "ptr", $hObject, "int", 1, "ptr", DllStructGetPtr($tPOTI), "ulong", DllStructGetSize($tPOTI), "ulong*", "") $sDeviceStr = DllStructGetData(DllStructCreate("wchar[" & Ceiling(DllStructGetData($tPOTI, "Length") / 2) & "];", DllStructGetData($tPOTI, "buffer")), 1) For $y = 0 To UBound($aDrivesInfo) - 1 If StringLeft($sDeviceStr, StringLen($aDrivesInfo[$y][1])) = $aDrivesInfo[$y][1] Then $sPath = StringUpper($aDrivesInfo[$y][0]) & StringTrimLeft($sDeviceStr, StringLen($aDrivesInfo[$y][1])) EndIf Next Return $sPath EndFunc Anonymous

Hi guys, This is just a general query, but it is related to >one of my previous topics in some ways. If a program generates 'sub-windows', i.e if file download dialogs are created that belong to the script's process, is there any way to return an array or something with the information, or handles for these windows? Hopefully that makes sense. Thanks in advance

Im relative new to this awesome script language and every day Im mindblowed but what things I discover and didn't know about the au3 syntax but I have some questions : #1. What is ByRef and what it does/why to use it/where to use it #2. Is this really really true that the first character after the $ sign in the variable name means the type of the variable ??? :shocked: ( Like $iVar = int and $sVar = char types from C ? ) What about if I declare $Random instead ? If the above is true, then why all my created programs are working with random names without the correct specific type declared ? Like $pink = 5 + 5 does works despite the 'p' representing the pointer type ! #3. Why I need to unregister things or close any handles like DllClose after a DllOpen OR _GDIPlus_Shutdown() after my script exists ? #4. And last but not the least why this : #include <Misc.au3> ;Global declarations ;... Func () Func() ; the code Endfunc and not this instead : #include <Misc.au3> ;Global declarations ;... ; the code Will there be any problems whatsoever if the last variant ?

I'm just curious why this doesn't work. Why doesn't the program exit when exit menu is clicked. What am I doing wrong? #include #include #Region ### START Koda GUI section ### Form= $Form1 = GUICreate("Form1", 221, 173, 192, 114) $exit = GUICtrlCreateMenu("Exit") GUISetState(@SW_SHOW) #EndRegion ### END Koda GUI section ### While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $exit ;This doesn't get called Exit EndSwitch WEnd