Search the Community

Hello everyone, First, watch the screenshot I attached: The background beneath the radios is that a value is subtracted from Player 1, and added to player 2, in the case of the screenshot I made. You can see that I created 2 radio groups. On the upper part, radio 1 and 2, and on the lower part radio 5 and 6. Now I automated the buttons in such a way ,that when in group 1 player 1 is selected, player 2 in group 2 automatically gets checked for you. Same thing when checking player 2 in the upper part: player 1 gets checked on the lower part. I did this because there is no reason selecting player 1 or 2 twice, because nothing will change. Now that runs smoothly using this script: If GUICtrlRead($Radio1)=1 And Not BitAND(GUICtrlGetState($Radio6),1) And Not BitAND(GUICtrlGetState($Radio5),1) Then GUICtrlSetState($Radio6,1) If GUICtrlRead($Radio2)=1 And Not BitAND(GUICtrlGetState($Radio5),1) And Not BitAND(GUICtrlGetState($Radio6),1) Then GUICtrlSetState($Radio5,1) If GUICtrlRead($Radio5)=1 And Not BitAND(GUICtrlGetState($Radio2),1) And Not BitAND(GUICtrlGetState($Radio1),1) Then GUICtrlSetState($Radio2,1) If GUICtrlRead($Radio6)=1 And Not BitAND(GUICtrlGetState($Radio1),1) And Not BitAND(GUICtrlGetState($Radio2),1) Then GUICtrlSetState($Radio1,1) But there is a problem when clicking on a radio in group 2, the lower one. It is very hard to check one, because for some reason the radio get's deselected instantly most of the time. I already tried to prevent it by using the second BitAND() in the codes I shared (It doesn't check the radio automatically if the other radio in the other group is selected, meaning that the user want's to switch the radios). But it didn't work. Does somebody know why you sometimes can't check radio 5 or 6 (the lower part)?

I created 3 radio buttons and when the script is run, the selected buttons display the text on the right of the actual button. Also, it appears like the radio button occupies space around it, as it obscures part of the other controls when I hover the mouse around it. I would like to group the buttons closer together and put other controls on the right of them. I also wanted to make the button text display on the left side of the button. Here is my test code: #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w 4 -w 5 -w 6 Opt("GUICloseOnESC", 1) ; ESC closes GUI? (0 = no, 1 = yes) Opt("GUIOnEventMode", 1) ; Change to OnEvent mode Opt('MustDeclareVars', 1) OnAutoItExitRegister("ExitStageLeft") Opt("GUIEventOptions", 1) ;0=default, 1=just notification, 2=GuiCtrlRead tab index _Main() Func _Main() GUICreate("test", 300, 300, -1, -1, -1, -1) GUIStartGroup() local $x = 50, $y = 10, $w = 40, $h = 15,$spcY = 15 GUICtrlCreateRadio("", $x, $y, $w, $h) GUICtrlCreateRadio("ABC", $x, $y + ($spcY*1), $w, $h) GUICtrlCreateRadio("", $x, $y + ($spcY*2), $w, $h) GUIStartGroup() GUICtrlCreateInput("An Input Control", 70, 10, 110, 30) GUICtrlCreateInput("Another Input Control", 10, 73, 110, 20) GUISetOnEvent(-3, 'ExitStageLeft') GUISetState(@SW_SHOW) While (1) Sleep(251) WEnd EndFunc Func ExitStageLeft() Exit EndFunc I want "ABC" to display on the left of the 2nd radio button.

Hi, I am maybe an intermediate AutoIt script writer, but have no experience creating GUIs. I have a script with two functions. One for Checkboxes and another with radio buttons. Each function creates it's own window. I'd like to use one window with both checkboxes and radio buttons. I pulled samples from AutoIt Help and other places and worked it into this: (RadioCheck still uses the example Case and MsgBoxes. I will clean this up soon) Func CheckOptions() ; Create a GUI with various controls. Local $hGUI = GUICreate("SGX4CP Options", 275, 250) ; Create a checkbox control. Local $iLoopCheckbox = GUICtrlCreateCheckbox("Loop", 10, 10, 185, 25) Local $iFullScreenCheckbox = GUICtrlCreateCheckbox("Fullscreen", 10, 40, 185, 25) Local $iRestartPlaybackCheckbox = GUICtrlCreateCheckbox("Restart Playback from Sleep", 10, 70, 185, 25) GUICtrlSetState($iRestartPlaybackCheckbox, $GUI_CHECKED) Local $iDisableSleepCheckbox = GUICtrlCreateCheckbox("Disable Sleep", 10, 100, 185, 25) Local $iLogCheckbox = GUICtrlCreateCheckbox("Show Log", 10, 130, 185, 25) GUICtrlSetState($iLogCheckbox, $GUI_CHECKED) Local $idClose = GUICtrlCreateButton("Next", 110, 220, 85, 25) ; Display the GUI. GUISetState(@SW_SHOW, $hGUI) ; Loop until the user exits. While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE, $idClose ExitLoop Case $iLoopCheckbox If _IsChecked($iLoopCheckbox) Then $bLoopChecked = True Else $bLoopChecked = False EndIf Case $iFullScreenCheckbox if _IsChecked($iFullScreenCheckbox) Then $bFullScreenChecked = True Else $bFullScreenChecked = False EndIf Case $iRestartPlaybackCheckbox if _IsChecked($iRestartPlaybackCheckbox) Then $bRestartPlaybackChecked = True Else $bRestartPlaybackChecked = False EndIf Case $iDisableSleepCheckbox if _IsChecked($iDisableSleepCheckbox) Then $bDisableSleepChecked = True Else $bDisableSleepChecked = False EndIf Case $iLogCheckbox if _IsChecked($iLogCheckbox) Then $bLogChecked = True Else $bLogChecked = False EndIf EndSwitch WEnd ; Delete the previous GUI and all controls. GUIDelete($hGUI) EndFunc Func RadioCheck() GUICreate("Select Test",300,180) ; will create a dialog box that when displayed is centered Local $idRadio1 = GUICtrlCreateRadio("Loop Forever", 10, 10) Local $idRadio2 = GUICtrlCreateRadio("Play each video 3 times", 10, 40) Local $idRadio3 = GUICtrlCreateRadio("Play each video separately", 10, 70) GUICtrlSetState($idRadio1, $GUI_CHECKED) Local $idClose = GUICtrlCreateButton("Start Test", 120,100) GUISetState(@SW_SHOW) Local $idMsg ; Loop until the user exits. While 1 $idMsg = GUIGetMsg() Select Case $idMsg = $GUI_EVENT_CLOSE ExitLoop Case $idMsg = $idRadio1 And BitAND(GUICtrlRead($idRadio1), $GUI_CHECKED) = $GUI_CHECKED MsgBox($MB_SYSTEMMODAL, 'Info:', 'The app will run forever, playing each video once, then looping back to the first video.') $bTestSelectForever = True Case $idMsg = $idRadio2 And BitAND(GUICtrlRead($idRadio2), $GUI_CHECKED) = $GUI_CHECKED MsgBox($MB_SYSTEMMODAL, 'Info:', 'Each video will loop 3 times then move to the next video.') $bTestSelect3Times = True Case $idMsg = $idRadio3 And BitAND(GUICtrlRead($idRadio2), $GUI_CHECKED) = $GUI_CHECKED MsgBox($MB_SYSTEMMODAL, 'Info:', 'Player opens, first video plays, player closes. Player opens, second video plays, player closes, etc.') $bTestSelectSingleVideo = True EndSelect WEnd EndFunc I would like to combine the checkbox "Loop" and the radio button $idRadio2. Radio2 requires Loop to be checked. I planned to remove the Loop checkbox and only enable it if Radio2 is selected. Can I combine these two functions into one with one window with both Checkboxes and Radio Buttons? Thanks Jibberish

I have below screen when I launch the application. By default the first radio button is checked. I want to select the second radio button as highlighted. And when it is selected, the textbox highlighted will be enabled and we need to enter the license details. To do that, I tried to get the control id with windo info tool , but I am getting the second section(Concurrent Licenses) completely as "Button" class with ID 12.But not that radiobutton ID. Even I tried with that as below. $hwd =WinWaitActivate("erwin Data Modeler Licensing","Acquire concurrent u") ControlCommand($hwd,"","[CLASS:Button; INSTANCE:12]","Check") But not working. Any suggestions please.

AutoIt Radio Player Last : v0.0.0.8 Tested only on W7X64 Changelog : ==========> AutoIt Radio Player v0.0.0.8.zip <========== Personal Message : This is my first script posted. Any comment are welcome. Give me your best web radio i will try add them ! Install/Use : Add a station : Unsolved problem : When the coverGUI go outside the monitor and comeback inside, a part of current cover disapear : I have no idea how fix that TODO : Make coverGUI mouse resizable (while script running) : any idea are welcome Crop some pixel of cover : any idea are welcome Related Posts/Bin : ArrayMultiColSort MouseWheelDelta Sample1 MouseWheelDelta Sample2 ContextMenu Fix ReduceMemory MemGlobalAllocFromBinary Curl.au3 (AutoIt binary code) Main Code : ;#AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7;All Warning ;-w 5 = local var declared but not used : Removed for Curl.au3 ;-d = as Opt("MustDeclareVars", 1) : Removed for Bass.au3 #AutoIt3Wrapper_Au3Check_Parameters=-w 1 -w 2 -w 3 -w- 4 -w 6 -w- 7 #Region ;==> #include #include <Array.au3>;_ArrayAdd #include <GuiButton.au3>;_GUICtrlButton_SetImage() #include <GuiMenu.au3>;$MNS_MODELESS #include <GUIConstants.au3>;$WS_POPUP #include <GDIplus.au3>;_GDIPlus_BitmapCreateFromStream() #include <Memory.au3>;$GMEM_MOVEABLE #include <String.au3>;_StringBetween() #include <AutoIt Radio Player\include\Bass.au3>;_BASS_ChannelPlay() #include <AutoIt Radio Player\include\BassConstants.au3>;$BASS_CONFIG_NET_PLAYLIST #include <AutoIt Radio Player\include\Curl.au3>;Curl_Data_Get() #EndRegion ;==> #include #Region ;==> Func for Bass.au3 Local $MusicHandle Func _Audio_play($MusicHandle) _BASS_ChannelPlay($MusicHandle, 1) EndFunc Func _Audio_stop($MusicHandle) _BASS_ChannelStop($MusicHandle) EndFunc Func _Audio_init_stop($MusicHandle) _BASS_StreamFree($MusicHandle) _BASS_Free() EndFunc Func _Audio_init_start() If _BASS_STARTUP(@ScriptDir & "\AutoIt Radio Player\include\bass.dll") Then If _BASS_Init(0, -1, 44100, 0) Then If _BASS_SetConfig($BASS_CONFIG_NET_PLAYLIST, 1) = 0 Then SetError(3) EndIf Else SetError(2) EndIf Else SetError(@error) EndIf EndFunc Func _Set_volume($volume) _BASS_SetConfig($BASS_CONFIG_GVOL_STREAM, $volume * 100) EndFunc Func _Set_url($file) If FileExists($file) Then $MusicHandle = _BASS_StreamCreateFile(False, $file, 0, 0, 0) Else $MusicHandle = _BASS_StreamCreateURL($file, 0, 1) EndIf If @error Then Return SetError(1) EndIf Return $MusicHandle EndFunc #EndRegion ;==> Func for Bass.au3 Global Const $SC_DRAGMOVE = 0xF012;Global #Region ;==> Func from AutoIt Forum ; #FUNCTION# ==================================================================================================================== ; Name...........: _ArrayMultiColSort ; Description ...: Sort 2D arrays on several columns ; Syntax.........: _ArrayMultiColSort(ByRef $aArray, $aSortData[, $iStart = 0[, $iEnd = 0]]) ; Parameters ....: $aArray - The 2D array to be sorted ; $aSortData - 2D array holding details of the sort format ; Format: [Column to be sorted, Sort order] ; Sort order can be either numeric (0/1 = ascending/descending) or a ordered string of items ; Any elements not matched in string are left unsorted after all sorted elements ; $iStart - Element of array at which sort starts (default = 0) ; $iEnd - Element of array at which sort endd (default = 0 - converted to end of array) ; Requirement(s).: v3.3.8.1 or higher ; Return values .: Success: No error ; Failure: @error set as follows ; @error = 1 with @extended set as follows (all refer to $sIn_Date): ; 1 = Array to be sorted not 2D ; 2 = Sort data array not 2D ; 3 = More data rows in $aSortData than columns in $aArray ; 4 = Start beyond end of array ; 5 = Start beyond End ; @error = 2 with @extended set as follows: ; 1 = Invalid string parameter in $aSortData ; 2 = Invalid sort direction parameter in $aSortData ; Author ........: Melba23 ; Remarks .......: Columns can be sorted in any order ; Example .......; Yes ; =============================================================================================================================== Func _ArrayMultiColSort(ByRef $aArray, $aSortData, $iStart = 0, $iEnd = 0) ; Errorchecking ; 2D array to be sorted If UBound($aArray, 2) = 0 Then Return SetError(1, 1, "") EndIf ; 2D sort data If UBound($aSortData, 2) <> 2 Then Return SetError(1, 2, "") EndIf If UBound($aSortData) > UBound($aArray) Then Return SetError(1, 3) EndIf ; Start element If $iStart < 0 Then $iStart = 0 EndIf If $iStart >= UBound($aArray) - 1 Then Return SetError(1, 4, "") EndIf ; End element If $iEnd <= 0 Or $iEnd >= UBound($aArray) - 1 Then $iEnd = UBound($aArray) - 1 EndIf ; Sanity check If $iEnd <= $iStart Then Return SetError(1, 5, "") EndIf Local $iCurrCol, $iChunk_Start, $iMatchCol ; Sort first column __AMCS_SortChunk($aArray, $aSortData, 0, $aSortData[0][0], $iStart, $iEnd) If @error Then Return SetError(2, @extended, "") EndIf ; Now sort within other columns For $iSortData_Row = 1 To UBound($aSortData) - 1 ; Determine column to sort $iCurrCol = $aSortData[$iSortData_Row][0] ; Create arrays to hold data from previous columns Local $aBaseValue[$iSortData_Row] ; Set base values For $i = 0 To $iSortData_Row - 1 $aBaseValue[$i] = $aArray[$iStart][$aSortData[$i][0]] Next ; Set start of this chunk $iChunk_Start = $iStart ; Now work down through array For $iRow = $iStart + 1 To $iEnd ; Match each column For $k = 0 To $iSortData_Row - 1 $iMatchCol = $aSortData[$k][0] ; See if value in each has changed If $aArray[$iRow][$iMatchCol] <> $aBaseValue[$k] Then ; If so and row has advanced If $iChunk_Start < $iRow - 1 Then ; Sort this chunk __AMCS_SortChunk($aArray, $aSortData, $iSortData_Row, $iCurrCol, $iChunk_Start, $iRow - 1) If @error Then Return SetError(2, @extended, "") EndIf EndIf ; Set new base value $aBaseValue[$k] = $aArray[$iRow][$iMatchCol] ; Set new chunk start $iChunk_Start = $iRow EndIf Next Next ; Sort final section If $iChunk_Start < $iRow - 1 Then __AMCS_SortChunk($aArray, $aSortData, $iSortData_Row, $iCurrCol, $iChunk_Start, $iRow - 1) If @error Then Return SetError(2, @extended, "") EndIf EndIf Next EndFunc ;==>_ArrayMultiColSort ; #FUNCTION# ==================================================================================================================== ; Name...........: __AMCS_SortChunk ; Description ...: Sorts array section ; Author ........: Melba23 ; Remarks .......: ; =============================================================================================================================== Func __AMCS_SortChunk(ByRef $aArray, $aSortData, $iRow, $iColumn, $iChunkStart, $iChunkEnd) Local $aSortOrder ; Set default sort direction Local $iSortDirn = 1 ; Need to prefix elements? If IsString($aSortData[$iRow][1]) Then ; Split elements $aSortOrder = StringSplit($aSortData[$iRow][1], ",") If @error Then Return SetError(1, 1, "") EndIf ; Add prefix to each element For $i = $iChunkStart To $iChunkEnd For $j = 1 To $aSortOrder[0] If $aArray[$i][$iColumn] = $aSortOrder[$j] Then $aArray[$i][$iColumn] = StringFormat("%02i-", $j) & $aArray[$i][$iColumn] ExitLoop EndIf Next ; Deal with anything that does not match If $j > $aSortOrder[0] Then $aArray[$i][$iColumn] = StringFormat("%02i-", $j) & $aArray[$i][$iColumn] EndIf Next Else Switch $aSortData[$iRow][1] Case 0, 1 ; Set required sort direction if no list If $aSortData[$iRow][1] Then $iSortDirn = -1 Else $iSortDirn = 1 EndIf Case Else Return SetError(1, 2, "") EndSwitch EndIf ; Sort the chunk Local $iSubMax = UBound($aArray, 2) - 1 __ArrayQuickSort2D($aArray, $iSortDirn, $iChunkStart, $iChunkEnd, $iColumn, $iSubMax) ; Remove any prefixes If IsString($aSortData[$iRow][1]) Then For $i = $iChunkStart To $iChunkEnd $aArray[$i][$iColumn] = StringTrimLeft($aArray[$i][$iColumn], 3) Next EndIf EndFunc ;==>__AMCS_SortChunk Func _ReduceMemory() Local $aReturn = DllCall("psapi.dll", "int", "EmptyWorkingSet", "long", -1) If @error = 1 Then Return SetError(1, 0, 0) EndIf Return $aReturn[0] EndFunc ;==>_ReduceMemory ; #FUNCTION# ==================================================================================================================== ; Name...........: _GDIPlus_ImageLoadFromHGlobal ; Description ...: Creates an Image object based on movable HGlobal memory block ; Syntax.........: _GDIPlus_ImageLoadFromHGlobal($hGlobal) ; Parameters ....: $hGlobal - Handle of a movable HGlobal memory block ; Return values .: Success - Pointer to a new Image object ; Failure - 0 and either: ; |@error and @extended are set if DllCall failed: ; | -@error = 1 if could not create IStream ; | -@error = 2 if DLLCall to create image failed ; |$GDIP_STATUS contains a non zero value specifying the error code ; Author ........: ProgAndy ; Modified.......: ; Remarks .......: After you are done with the object, call _GDIPlus_ImageDispose to release the object resources. ; The HGLOBAL will be owned by the image and freed automatically when the image is disposed. ; Related .......: _GDIPlus_ImageLoadFromStream, _GDIPlus_ImageDispose ; Link ..........: ; Example .......: ; =============================================================================================================================== Func _GDIPlus_ImageLoadFromHGlobal($hGlobal) Local $aResult = DllCall("ole32.dll", "int", "CreateStreamOnHGlobal", "handle", $hGlobal, "bool", True, "ptr*", 0) If @error Or $aResult[0] <> 0 Or $aResult[3] = 0 Then Return SetError(1, @error, 0) Local $hImage = DllCall($__g_hGDIPDll, "uint", "GdipLoadImageFromStream", "ptr", $aResult[3], "int*", 0) Local $error = @error Local $tVARIANT = DllStructCreate("word vt;word r1;word r2;word r3;ptr data; ptr") Local $aCall = DllCall("oleaut32.dll", "long", "DispCallFunc", "ptr", $aResult[3], "dword", 8 + 8 * @AutoItX64, "dword", 4, "dword", 23, "dword", 0, "ptr", 0, "ptr", 0, "ptr", DllStructGetPtr($tVARIANT)) If $error Then Return SetError(2, $error, 0) If $hImage[2] = 0 Then Return SetError(3, 0, $hImage[2]) Return $hImage[2] EndFunc ;==>_GDIPlus_ImageLoadFromHGlobal ; #FUNCTION# ==================================================================================================================== ; Name...........: _MemGlobalAllocFromBinary ; Description ...: Greates a movable HGLOBAL memory block from binary data ; Syntax.........: _MemGlobalAllocFromBinary($bBinary) ; Parameters ....: $bBinary - Binary data ; Return values .: Success - Handle of a new movable HGLOBAL ; Failure - 0 and set @error: ; |1 - no data ; |2 - could not allocate memory ; |3 - could not set data to memory ; Author ........: ProgAndy ; Modified.......: ; Remarks .......: ; Related .......: _MemGlobalAlloc, _MemGlobalFree, _MemGlobalLock ; Link ..........: ; Example .......: ; =============================================================================================================================== Func _MemGlobalAllocFromBinary(Const $bBinary) Local $iLen = BinaryLen($bBinary) If $iLen = 0 Then Return SetError(1, 0, 0) Local $hMem = _MemGlobalAlloc($iLen, $GMEM_MOVEABLE) If @error Or Not $hMem Then Return SetError(2, 0, 0) DllStructSetData(DllStructCreate("byte[" & $iLen & "]", _MemGlobalLock($hMem)), 1, $bBinary) If @error Then _MemGlobalUnlock($hMem) _MemGlobalFree($hMem) Return SetError(3, 0, 0) EndIf _MemGlobalUnlock($hMem) Return $hMem EndFunc ;==>_MemGlobalAllocFromBinary #EndRegion ;==> Func from AutoIt Forum ;INI Location Local $Config_INI = "AutoIt Radio Player\Config.ini" Local $Save_INI = "AutoIt Radio Player\Save.ini" ;Get $aRadio and $aLabel <===========================================That part need improve Local $aINISections = IniReadSectionNames($Config_INI) Local $aRadio[0][8] Local $aLabel[0][11] For $i = 1 To UBound($aINISections) - 1 If $aINISections[$i] <> "GUI" Then ;For $aRadio Local $SoundLink = "", $CoverLink = "", $CoverLinkStart = "", $CoverLinkEnd = "", $CoverLinkBetweenNum = "", $CoverLinkBefore = "", $Default = 0 ;For $aLabel Local $CurrentArtistLink = "", $CurrentArtistStart = "", $CurrentArtistEnd = "", $CurrentArtistBetweenNum = 0, $CurrentArtistSplit = "", $CurrentArtistNumSplit = "" Local $CurrentAlbumLink = "", $CurrentAlbumStart = "", $CurrentAlbumEnd = "", $CurrentAlbumBetweenNum = 0, $CurrentAlbumSplit = "", $CurrentAlbumNumSplit = "" Local $CurrentTitleLink = "", $CurrentTitleStart = "", $CurrentTitleEnd = "", $CurrentTitleBetweenNum = 0, $CurrentTitleSplit = "", $CurrentTitleNumSplit = "" Local $NextArtistLink = "", $NextArtistStart = "", $NextArtistEnd = "", $NextArtistBetweenNum = 0, $NextArtistSplit = "", $NextArtistNumSplit = "" Local $NextAlbumLink = "", $NextAlbumStart = "", $NextAlbumEnd = "", $NextAlbumBetweenNum = 0, $NextAlbumSplit = "", $NextAlbumNumSplit = "" Local $NextTitleLink = "", $NextTitleStart = "", $NextTitleEnd = "", $NextTitleBetweenNum = 0, $NextTitleSplit = "", $NextTitleNumSplit = "" Local $ListenersCountLink = "", $ListenersCountStart = "", $ListenersCountEnd = "", $ListenersCountBetweenNum = 0, $ListenersCountSplit = "", $ListenersCountNumSplit = "" Local $controlID1 = "", $controlID2 = "" Local $Sec = IniReadSection($Config_INI, $aINISections[$i]) For $y = 1 To UBound($Sec) - 1 Assign($Sec[$y][0], $Sec[$y][1]) Next ;$aRadio _ArrayAdd($aRadio, $aINISections[$i] & "|" & $SoundLink & "|" & $CoverLink & "|" & $CoverLinkStart & "|" & $CoverLinkEnd & "|" & $CoverLinkBetweenNum & "|" & $CoverLinkBefore & "|" & $Default) ;$aLabel _ArrayAdd($aLabel, $aINISections[$i] & "|" & "Current" & "|" & "Artist" & "|" & $CurrentArtistLink & "|" & $CurrentArtistStart & "|" & $CurrentArtistEnd & "|" & $CurrentArtistBetweenNum & "|" & $CurrentArtistSplit & "|" & $CurrentArtistNumSplit & "|" & $controlID1 & "|" & $controlID2) _ArrayAdd($aLabel, $aINISections[$i] & "|" & "Current" & "|" & "Album" & "|" & $CurrentAlbumLink & "|" & $CurrentAlbumStart & "|" & $CurrentAlbumEnd & "|" & $CurrentAlbumBetweenNum & "|" & $CurrentAlbumSplit & "|" & $CurrentAlbumNumSplit & "|" & $controlID1 & "|" & $controlID2) _ArrayAdd($aLabel, $aINISections[$i] & "|" & "Current" & "|" & "Title" & "|" & $CurrentTitleLink & "|" & $CurrentTitleStart & "|" & $CurrentTitleEnd & "|" & $CurrentTitleBetweenNum & "|" & $CurrentTitleSplit & "|" & $CurrentTitleNumSplit & "|" & $controlID1 & "|" & $controlID2) _ArrayAdd($aLabel, $aINISections[$i] & "|" & "Next" & "|" & "Artist" & "|" & $NextArtistLink & "|" & $NextArtistStart & "|" & $NextArtistEnd & "|" & $NextArtistBetweenNum & "|" & $NextArtistSplit & "|" & $NextArtistNumSplit & "|" & $controlID1 & "|" & $controlID2) _ArrayAdd($aLabel, $aINISections[$i] & "|" & "Next" & "|" & "Album" & "|" & $NextAlbumLink & "|" & $NextAlbumStart & "|" & $NextAlbumEnd & "|" & $NextAlbumBetweenNum & "|" & $NextAlbumSplit & "|" & $NextAlbumNumSplit & "|" & $controlID1 & "|" & $controlID2) _ArrayAdd($aLabel, $aINISections[$i] & "|" & "Next" & "|" & "Title" & "|" & $NextTitleLink & "|" & $NextTitleStart & "|" & $NextTitleEnd & "|" & $NextTitleBetweenNum & "|" & $NextTitleSplit & "|" & $NextTitleNumSplit & "|" & $controlID1 & "|" & $controlID2) _ArrayAdd($aLabel, $aINISections[$i] & "|" & "Listeners" & "|" & "Count" & "|" & $ListenersCountLink & "|" & $ListenersCountStart & "|" & $ListenersCountEnd & "|" & $ListenersCountBetweenNum & "|" & $ListenersCountSplit & "|" & $ListenersCountNumSplit & "|" & $controlID1 & "|" & $controlID2) EndIf Next Global $aRadio_Sort[][] = [[0, 0], [1, 0]] _ArrayMultiColSort($aRadio, $aRadio_Sort) Local $aLabel2[0][11] For $i = 0 To UBound($aLabel) - 1 If $aLabel[$i][3] <> "" Then Local $fill = $aLabel[$i][0] For $y = 1 To UBound($aLabel, 2) - 1 $fill = $fill & "|" & $aLabel[$i][$y] Next _ArrayAdd($aLabel2, $fill) EndIf Next $aLabel = $aLabel2 ;_ArrayDisplay($aRadio) ;_ArrayDisplay($aLabel) ;Init/Opt Opt("GUIOnEventMode", 1) _Audio_init_start() _GDIPlus_Startup() ;Icon Local $IcoFile = @ScriptDir & "\AutoIt Radio Player\img\icon.ico" Local $IcoNumber = -1 TraySetIcon($IcoFile, $IcoNumber) ;Get Default Station Local $def_selected = 0 For $r = 0 To UBound($aRadio) - 1 If $aRadio[$r][0] = IniRead($Save_INI, @ComputerName, "Default_Radio", "default") Then $def_selected = 1 $aRadio[$r][7] = 1 EndIf Next If $def_selected = 0 Then $aRadio[0][7] = 1 EndIf ;ConsoleWrite("Start" & @CRLF) ;Get $Radio_Name, $Radio_SoundLink, $Radio_CoverLink, $Radio_CoverLink_Start, $Radio_CoverLink_End, $Radio_CoverLink_BetweenNum, $Radio_CoverLink_Before Local $Radio_Name, $Radio_SoundLink, $Radio_CoverLink Local $Radio_CoverLink_Start, $Radio_CoverLink_End, $Radio_CoverLink_BetweenNum, $Radio_CoverLink_Before For $r = 0 To UBound($aRadio) - 1 If $aRadio[$r][7] = 1 Then $Radio_Name = $aRadio[$r][0] $Radio_SoundLink = $aRadio[$r][1] $Radio_CoverLink = $aRadio[$r][2] $Radio_CoverLink_Start = $aRadio[$r][3] $Radio_CoverLink_End = $aRadio[$r][4] $Radio_CoverLink_BetweenNum = $aRadio[$r][5] $Radio_CoverLink_Before = $aRadio[$r][6] EndIf Next ;Declare Local $PlayerGUI, $CoverGUI;GUI Local $PlayPause, $Close;Button Local $Play = 1;PlayStatus ($Play = 1 = Autoplay) Local $Volume_Label, $VolumePercent, $Previous_VolumePercent;Volume Local $Previous_Cover_Read;PreviousRead Local $BASS_ErrorGetCode ;$Config_INI\GUI Local $CoverSize = IniRead($Config_INI, "GUI", "CoverSize", 150) Local $PlayerBorder = IniRead($Config_INI, "GUI", "PlayerBorder", 10) ;ConsoleWrite("Build GUI" & @CRLF) ;Build GUI _Build_PlayerGUI() _Build_CoverGUI() ;ConsoleWrite("Show GUI" & @CRLF) GUISetState(@SW_SHOW, $PlayerGUI) If $Radio_CoverLink <> "" Then GUISetState(@SW_SHOW, $CoverGUI) EndIf _Set_volume(0) ;GetPlayerDATA() - GetCoverDATA() - Start Sound GetPlayerDATA();Start Sound too with resume on disconnect AdlibRegister("GetPlayerDATA", 8000) If $Radio_CoverLink <> "" Then GetCoverDATA() AdlibRegister("GetCoverDATA", 8000) EndIf ;ConsoleWrite("GUIRegisterMsg" & @CRLF) GUIRegisterMsg($WM_MOUSEWHEEL, "_WM_MOUSEWHEEL");for set volume GUIRegisterMsg($WM_LBUTTONDOWN, "_WM_LBUTTONDOWN");for drag gui #Region ;==> Internal Func Func _Build_CoverGUI() ;ConsoleWrite("Build CoverGUI" & @CRLF) If $Radio_CoverLink <> "" Then $CoverGUI = GUICreate("AutoIt Radio Cover", _;Title $CoverSize, _ ;X $CoverSize, _ ;Y IniRead($Save_INI, @ComputerName, "Cover_X", -1), _;Left IniRead($Save_INI, @ComputerName, "Cover_Y", -1), _;Top $WS_POPUP, $WS_EX_TOPMOST);Style GUISetBkColor(0x000000, $CoverGUI);Black BkColor GUISetIcon($IcoFile, $IcoNumber, $CoverGUI) Else $CoverGUI = "" EndIf EndFunc ;==>_Build_CoverGUI Func _Build_PlayerGUI() ;ConsoleWrite("Build PlayerGUI" & @CRLF) ;Clean previous stored ControlID For $r = 0 To UBound($aLabel) - 1 $aLabel[$r][9] = "" $aLabel[$r][10] = "" Next ;$LabelCount Local $LabelCount = 0 For $r = 0 To UBound($aLabel) - 1 If $Radio_Name = $aLabel[$r][0] Then $LabelCount = $LabelCount + 1 EndIf Next ;$LabelY If $LabelCount * 13 + $PlayerBorder * 2 < 50 Then Local $LabelY = 10 * 3 Else $LabelY = $LabelCount * 13 EndIf ;$PlayerGUI $PlayerGUI = GUICreate("AutoIt Radio Player", _ $PlayerBorder + 260 + 50 + 10 + $PlayerBorder * 2, _;X $PlayerBorder + $LabelY + $PlayerBorder, _;Y IniRead($Save_INI, @ComputerName, "Title_X", -1), _;Left IniRead($Save_INI, @ComputerName, "Title_Y", -1), _;Top $WS_POPUP, $WS_EX_TOPMOST);Style GUISetBkColor(0x000000, $PlayerGUI);Black BkColor GUISetIcon($IcoFile, $IcoNumber, $PlayerGUI) ;$Contextmenu Local $ContextMenu = GUICtrlCreateContextMenu(-1) Local $hCM = GUICtrlGetHandle($ContextMenu) _GUICtrlMenu_SetMenuStyle($hCM, BitXOR(_GUICtrlMenu_GetMenuStyle($hCM), $MNS_MODELESS)) Local $ContextMenu_Item1 = GUICtrlCreateMenuItem($Radio_Name, $ContextMenu) GUICtrlSetOnEvent($ContextMenu_Item1, "ContextMenu_ChangeRadio") GUICtrlCreateMenuItem("", $ContextMenu);Add separator For $r = 0 To UBound($aRadio) - 1 If $aRadio[$r][7] = 0 Then GUICtrlCreateMenuItem($aRadio[$r][0], $ContextMenu) GUICtrlSetOnEvent(-1, "ContextMenu_ChangeRadio") EndIf Next ;GUICtrlCreateLabel $LabelCount = 0 Local $Previous_Type = "" For $r = 0 To UBound($aLabel) - 1 If $Radio_Name = $aLabel[$r][0] Then If $Previous_Type <> $aLabel[$r][1] Then $Previous_Type = $aLabel[$r][1] $aLabel[$r][10] = GUICtrlCreateLabel($aLabel[$r][1], $PlayerBorder, 13 * $LabelCount + $PlayerBorder, 50, 13, $SS_CENTERIMAGE) GUICtrlSetColor($aLabel[$r][10], 0xFFFFFF);White TextColor GUICtrlSetOnEvent($aLabel[$r][10], "_WM_LBUTTONDOWN") $ContextMenu = GUICtrlCreateContextMenu($aLabel[$r][10]) $hCM = GUICtrlGetHandle($ContextMenu) _GUICtrlMenu_SetMenuStyle($hCM, BitXOR(_GUICtrlMenu_GetMenuStyle($hCM), $MNS_MODELESS)) $ContextMenu_Item1 = GUICtrlCreateMenuItem($Radio_Name, $ContextMenu) GUICtrlSetOnEvent(-1, "ContextMenu_ChangeRadio") GUICtrlCreateMenuItem("", $ContextMenu);Add separator For $r2 = 0 To UBound($aRadio) - 1 If $aRadio[$r2][7] = 0 Then GUICtrlCreateMenuItem($aRadio[$r2][0], $ContextMenu) GUICtrlSetOnEvent(-1, "ContextMenu_ChangeRadio") EndIf Next EndIf $aLabel[$r][9] = GUICtrlCreateLabel("", $PlayerBorder + 50, 13 * $LabelCount + $PlayerBorder, 260, 13, $SS_CENTERIMAGE) $LabelCount = $LabelCount + 1 GUICtrlSetColor($aLabel[$r][9], 0xFFFFFF);White TextColor GUICtrlSetOnEvent($aLabel[$r][9], "_WM_LBUTTONDOWN") $ContextMenu = GUICtrlCreateContextMenu($aLabel[$r][9]) $hCM = GUICtrlGetHandle($ContextMenu) _GUICtrlMenu_SetMenuStyle($hCM, BitXOR(_GUICtrlMenu_GetMenuStyle($hCM), $MNS_MODELESS)) $ContextMenu_Item1 = GUICtrlCreateMenuItem($Radio_Name, $ContextMenu) GUICtrlSetOnEvent(-1, "ContextMenu_ChangeRadio") GUICtrlCreateMenuItem("", $ContextMenu);Add separator For $r2 = 0 To UBound($aRadio) - 1 If $aRadio[$r2][7] = 0 Then GUICtrlCreateMenuItem($aRadio[$r2][0], $ContextMenu) GUICtrlSetOnEvent(-1, "ContextMenu_ChangeRadio") EndIf Next EndIf Next ;GUICtrlCreateLabel Volume $Volume_Label = GUICtrlCreateLabel("0", $PlayerBorder, $PlayerBorder, 260 + 50, $LabelY, "") GUICtrlSetColor($Volume_Label, 0xFFFFFF);White TextColor GUICtrlSetOnEvent($Volume_Label, "_WM_LBUTTONDOWN") GUICtrlSetState($Volume_Label, $GUI_HIDE) ;$Volume_Label Contextmenu $ContextMenu = GUICtrlCreateContextMenu($Volume_Label) $hCM = GUICtrlGetHandle($ContextMenu) _GUICtrlMenu_SetMenuStyle($hCM, BitXOR(_GUICtrlMenu_GetMenuStyle($hCM), $MNS_MODELESS)) $ContextMenu_Item1 = GUICtrlCreateMenuItem($Radio_Name, $ContextMenu) GUICtrlSetOnEvent(-1, "ContextMenu_ChangeRadio") GUICtrlCreateMenuItem("", $ContextMenu);Add separator For $r = 0 To UBound($aRadio) - 1 If $aRadio[$r][7] = 0 Then Local $Item = GUICtrlCreateMenuItem($aRadio[$r][0], $ContextMenu) GUICtrlSetOnEvent(-1, "ContextMenu_ChangeRadio") EndIf Next ;$Close $Close = GUICtrlCreateButton("Close", _ $PlayerBorder * 2 + 260 + 50, _;Left $PlayerBorder, _;Top 10, _;X 10, _;Y $BS_BITMAP);Style _GUICtrlButton_SetImage($Close, @ScriptDir & "\AutoIt Radio Player\Img\Close.bmp") GUICtrlSetOnEvent($Close, "_Close") GUICtrlSetOnEvent($GUI_EVENT_CLOSE, "_Close") ;$PlayPause $PlayPause = GUICtrlCreateButton("Play/Pause", _ $PlayerBorder * 2 + 260 + 50, _;Left $PlayerBorder + 10 + 10, _;Top 10, _;X 10, _;Y $BS_BITMAP);Style _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\Stop.bmp") GUICtrlSetOnEvent($PlayPause, "_PlayPause") EndFunc ;==>_Build_PlayerGUI Func _Close() _Audio_init_stop($MusicHandle) _GDIPlus_Shutdown() Exit EndFunc ;==>_Close Func _PlayPause() ;Change $Play If $Play = 1 Then $Play = 0 Else $Play = 1 EndIf Local $Msg = GUIGetCursorInfo($PlayerGUI) ;Change Button Image If $Play = 1 Then If $Msg[4] = $PlayPause Then If $Msg[2] = 1 Then _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\stopp.bmp");Mouse Pressed Else _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\stopo.bmp");Mouse Over EndIf Else _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\stop.bmp");Nothing EndIf Else If $Msg[4] = $PlayPause Then If $Msg[2] = 1 Then _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\playp.bmp");Mouse Pressed Else _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\playo.bmp");Mouse Over EndIf Else _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\play.bmp");Nothing EndIf EndIf ;Play Sound If $Play = 0 Then _Audio_stop($MusicHandle) Else $MusicHandle = _Set_url($Radio_SoundLink) _Audio_play($MusicHandle) EndIf EndFunc ;==>_PlayPause Func _RemoveVolumeLabel() AdlibUnRegister("_RemoveVolumeLabel") ;Show Others Label For $i = 0 To UBound($aLabel) - 1 If $Radio_Name = $aLabel[$i][0] Then GUICtrlSetState($aLabel[$i][9], $GUI_SHOW) EndIf Next Local $Previous_Type = "" For $i = 0 To UBound($aLabel) - 1 If $Radio_Name = $aLabel[$i][0] Then If $Previous_Type <> $aLabel[$i][1] Then $Previous_Type = $aLabel[$i][1] GUICtrlSetState($aLabel[$i][10], $GUI_SHOW) EndIf GUICtrlSetState($aLabel[$i][9], $GUI_SHOW) EndIf Next ;Hide Volume Label GUICtrlSetState($Volume_Label, $GUI_HIDE) EndFunc ;==>_RemoveVolumeLabel Func _Save_Change_Volume() AdlibUnRegister("_Save_Change_Volume") _Set_volume($VolumePercent);Set IniWrite($Save_INI, @ComputerName, "Volume", $VolumePercent);Save EndFunc ;==>_Save_Change_Volume Func _WM_LBUTTONDOWN() ;Move GUI If WinActive("AutoIt Radio Cover") Then _SendMessage($CoverGUI, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) Else _SendMessage($PlayerGUI, $WM_SYSCOMMAND, $SC_DRAGMOVE, 0) EndIf ;Save GUI pos Local $Player_pos = WinGetPos("AutoIt Radio Player") Local $Cover_pos = WinGetPos("AutoIt Radio Cover") IniWrite($Save_INI, @ComputerName, "Title_X", $Player_pos[0]) IniWrite($Save_INI, @ComputerName, "Title_Y", $Player_pos[1]) If $Radio_CoverLink <> "" Then IniWrite($Save_INI, @ComputerName, "Cover_X", $Cover_pos[0]) IniWrite($Save_INI, @ComputerName, "Cover_Y", $Cover_pos[1]) EndIf EndFunc ;==>_WM_LBUTTONDOWN Func _WM_MOUSEWHEEL($hWnd, $iMsg, $wParam, $lParam) AdlibUnRegister("_RemoveVolumeLabel") If GUICtrlGetState($Volume_Label) <> 80 Then ;Show $Volume_Label GUICtrlSetState($Volume_Label, $GUI_SHOW) ;Hide Others Label Local $Previous_Type = "" For $i = 0 To UBound($aLabel) - 1 If $Radio_Name = $aLabel[$r][0] Then If $Previous_Type <> $aLabel[$i][1] Then $Previous_Type = $aLabel[$i][1] GUICtrlSetState($aLabel[$i][10], $GUI_HIDE) EndIf GUICtrlSetState($aLabel[$i][9], $GUI_HIDE) EndIf Next EndIf ;Change $VolumePercent Local $WheelDelta = BitShift($wParam, 16) / 120 $VolumePercent = $VolumePercent + 4 * $WheelDelta If $WheelDelta > 0 Then If $VolumePercent > 100 Then $VolumePercent = 100 Else If $VolumePercent < 0 Then $VolumePercent = 0 EndIf If $Previous_VolumePercent <> $VolumePercent Then $Previous_VolumePercent = $VolumePercent GUICtrlSetData($Volume_Label, $VolumePercent) EndIf ;Change\Save Sound AdlibRegister("_Save_Change_Volume", 50) ;Hide $Volume_Label in 3s AdlibRegister("_RemoveVolumeLabel", 3000) Return $GUI_RUNDEFMSG EndFunc ;==>_WM_MOUSEWHEEL Func ContextMenu_ChangeRadio() $Previous_Cover_Read = "" Local $NewRadioName = GUICtrlRead(@GUI_CtrlId, 1) ;Maybe the next radio have no cover so delete it If $Radio_CoverLink <> "" Then GUIDelete($CoverGUI) AdlibUnRegister("GetCoverDATA") EndIf ;Maybe the $PlayerGUI need resize so delete it GUIDelete($PlayerGUI) AdlibUnRegister("GetPlayerDATA") _Audio_stop($MusicHandle) ;Remove Default Radio Tag For $r = 0 To UBound($aRadio) - 1 $aRadio[$r][7] = 0 Next ;Set $NewRadioName to Default For $r = 0 To UBound($aRadio) - 1 If $aRadio[$r][0] = $NewRadioName Then $aRadio[$r][7] = 1 IniWrite($Save_INI, @ComputerName, "Default_Radio", $aRadio[$r][0]) EndIf Next ;Get $Radio_Name, $Radio_SoundLink, $Radio_CoverLink, $Radio_CoverLink_Start, $Radio_CoverLink_End, $Radio_CoverLink_BetweenNum, $Radio_CoverLink_Before For $r = 0 To UBound($aRadio) - 1 If $aRadio[$r][7] = 1 Then $Radio_Name = $aRadio[$r][0] $Radio_SoundLink = $aRadio[$r][1] $Radio_CoverLink = $aRadio[$r][2] $Radio_CoverLink_Start = $aRadio[$r][3] $Radio_CoverLink_End = $aRadio[$r][4] $Radio_CoverLink_BetweenNum = $aRadio[$r][5] $Radio_CoverLink_Before = $aRadio[$r][6] EndIf Next ;ConsoleWrite("Build GUI" & @CRLF) ;Build GUI _Build_PlayerGUI() _Build_CoverGUI() ;ConsoleWrite("Show GUI" & @CRLF) GUISetState(@SW_SHOW, $PlayerGUI) If $Radio_CoverLink <> "" Then GUISetState(@SW_SHOW, $CoverGUI) EndIf ;GetPlayerDATA() - GetCoverDATA() GetPlayerDATA() AdlibRegister("GetPlayerDATA", 8000) If $Radio_CoverLink <> "" Then GetCoverDATA() AdlibRegister("GetCoverDATA", 8000) EndIf EndFunc ;==>ContextMenu_ChangeRadio Func UseCurl($Link, $Timeout, $binary = 0, $write = 0, $file = "") Local $Error = "" Local $Data = "" Local $Curl = Curl_Easy_Init() If Not $Curl Then Return If $write = 0 Then ;Read Mode ; How to get html or header data? ; 1. Set $CURLOPT_WRITEFUNCTION and $CURLOPT_HEADERFUNCTION to Curl_DataWriteCallback() ; 2. Set $CURLOPT_WRITEDATA or $CURLOPT_HEADERDATA to any number as identify ; 3. Use Curl_Data_Get() to read the returned data in binary format ; 4. Use Curl_Data_Cleanup() to remove the data Local $Html = $Curl ; any number as identify Local $Header = $Curl + 1 ; any number as identify Curl_Easy_Setopt($Curl, $CURLOPT_URL, $Link) Curl_Easy_Setopt($Curl, $CURLOPT_USERAGENT, 'Mozilla/5.0 (Macintosh; Intel Mac OS X 10_9_3) AppleWebKit/537.75.14 (KHTML, like Gecko) Version/7.0.3 Safari/7046A194A') Curl_Easy_Setopt($Curl, $CURLOPT_FOLLOWLOCATION, 1) Curl_Easy_Setopt($Curl, $CURLOPT_ACCEPT_ENCODING, "") Curl_Easy_Setopt($Curl, $CURLOPT_WRITEFUNCTION, Curl_DataWriteCallback()) Curl_Easy_Setopt($Curl, $CURLOPT_WRITEDATA, $Html) Curl_Easy_Setopt($Curl, $CURLOPT_HEADERFUNCTION, Curl_DataWriteCallback()) Curl_Easy_Setopt($Curl, $CURLOPT_HEADERDATA, $Header) Curl_Easy_Setopt($Curl, $CURLOPT_COOKIE, "tool=curl; script=autoit; fun=yes;") Curl_Easy_Setopt($Curl, $CURLOPT_TIMEOUT, $Timeout) Curl_Easy_Setopt($Curl, $CURLOPT_SSL_VERIFYPEER, 0) Local $Code = Curl_Easy_Perform($Curl) If $Code = $CURLE_OK Then ;ConsoleWrite("Content Type: " & Curl_Easy_GetInfo($Curl, $CURLINFO_CONTENT_TYPE) & @LF) ;ConsoleWrite("Download Size: " & Curl_Easy_GetInfo($Curl, $CURLINFO_SIZE_DOWNLOAD) & @LF) $Data = BinaryToString(Curl_Data_Get($Html)) $Error = "" ;MsgBox(0, 'Header', BinaryToString(Curl_Data_Get($Header))) ;MsgBox(0, 'Html', BinaryToString(Curl_Data_Get($Html))) Else ;ConsoleWrite(Curl_Easy_StrError($Code) & @LF) $Data = "" $Error = Curl_Easy_StrError($Code) EndIf Curl_Easy_Cleanup($Curl) Curl_Data_Cleanup($Header) Curl_Data_Cleanup($Html) Else ;Write Mode EndIf Local $aray[2] = [$Data,$Error] return $aray EndFunc Func GetCoverDATA() ;ConsoleWrite("GetCoverDATA (Start)" & @CRLF) ;Get $RealCoverLink If $Radio_CoverLink_Start = "" Then ;ConsoleWrite("$RealCoverLink = $Radio_CoverLink" & @CRLF) Local $RealCoverLink = $Radio_CoverLink Else ;ConsoleWrite("$RealCoverLink <> $Radio_CoverLink" & @CRLF) ;UseCurl($Link, $Timeout, $binary = 0, $write = 0, $file = "") Local $aray = UseCurl($Radio_CoverLink, 5) Local $Data = $aray[0] Local $Error = $aray[1] If $Error <> "" then ;ConsoleWrite("$Error = " & $Error & @CRLF) EndIf Local $Between = _StringBetween($Data, $Radio_CoverLink_Start, $Radio_CoverLink_End) If @error <> 0 Then $Between = "" Else $Between = $Between[$Radio_CoverLink_BetweenNum] EndIf $RealCoverLink = $Radio_CoverLink_Before & $Between $RealCoverLink = StringReplace($RealCoverLink, " ","%20") EndIf ;ConsoleWrite("$RealCoverLink = " & $RealCoverLink & @CRLF) ;UseCurl($Link, $Timeout, $binary = 0, $write = 0, $file = "") Local $Cover_Read = UseCurl($RealCoverLink, 5, 1) $Cover_Read = $Cover_Read[0] If $Cover_Read <> $Previous_Cover_Read and $Cover_Read <> "" Then $Previous_Cover_Read = $Cover_Read Local $hMem = _MemGlobalAllocFromBinary($Cover_Read) Local $hImage = _GDIPlus_ImageLoadFromHGlobal($hMem) Local $hGraphics = _GDIPlus_GraphicsCreateFromHWND($CoverGUI) _GDIPlus_GraphicsDrawImageRect($hGraphics, $hImage, 0, 0, $CoverSize, $CoverSize) _GDIPlus_GraphicsDispose($hGraphics) _GDIPlus_ImageDispose($hImage) EndIf ;ConsoleWrite("GetCoverDATA (End)" & @CRLF) EndFunc ;==>GetCoverDATA() Func GetPlayerDATA() _ReduceMemory() ;ConsoleWrite("GetPlayerDATA (Start)" & @CRLF) ;Assign Local $Previous_Data, $Previous_DataLink For $i = 0 To UBound($aLabel) - 1 If $Radio_Name = $aLabel[$i][0] Then If $Previous_DataLink <> $aLabel[$i][3] Then Local $aray = UseCurl($aLabel[$i][3], 5) Local $Data = $aray[0] Local $Error = $aray[1] $Previous_Data = $Data $Previous_DataLink = $aLabel[$i][3] Else $Data = $Previous_Data $Previous_DataLink = $aLabel[$i][3] EndIf Local $Between = _StringBetween($Data, $aLabel[$i][4], $aLabel[$i][5]) If @error <> 0 Then $Between = "" Else If Not ($aLabel[$i][6] > Ubound($Between)-1) Then $Between = $Between[$aLabel[$i][6]] Else $Between = "" EndIf EndIf If $aLabel[$i][7] <> "" Then Local $Split = StringSplit($Between, $aLabel[$i][7], 1) If $Split[0] < $aLabel[$i][8] Then Local $Info = "" Else $Info = $Split[$aLabel[$i][8]] EndIf Else $Info = $Between EndIf If $Data = "" Then $Info = $Error EndIf $Info = StringReplace($Info, "â·", "·") $Info = StringReplace($Info, "apos;", "'") Assign($aLabel[$i][1] & $aLabel[$i][2], $Info) EndIf Next If _BASS_ChannelIsActive($MusicHandle) <> 1 and $Play = 1 Then _Audio_stop($MusicHandle) ;ConsoleWrite("Start playing sound" & @CRLF) $Play = 1 $MusicHandle = _Set_url($Radio_SoundLink) _Audio_play($MusicHandle) ;ConsoleWrite("Set Volume" & @CRLF) $VolumePercent = IniRead($Save_INI, @ComputerName, "Volume", 4) $Previous_VolumePercent = $VolumePercent _Set_volume($VolumePercent) EndIf ;Update Ctrl For $i = 0 To UBound($aLabel) - 1 If $Radio_Name = $aLabel[$i][0] Then If Eval($aLabel[$i][1] & $aLabel[$i][2]) <> GUICtrlRead($aLabel[$i][9]) Then GUICtrlSetData($aLabel[$i][9], Eval($aLabel[$i][1] & $aLabel[$i][2])) EndIf EndIf Next ;ConsoleWrite("GetPlayerDATA (End)" & @CRLF) EndFunc ;==>GetPlayerDATA() #EndRegion ;==> Internal Func While 1 Local $Msg = GUIGetCursorInfo($PlayerGUI) If $Msg[4] = $Close Then If $Msg[2] = 1 Then _GUICtrlButton_SetImage($Close, @ScriptDir & "\AutoIt Radio Player\Img\Closep.bmp");MousePressed Else _GUICtrlButton_SetImage($Close, @ScriptDir & "\AutoIt Radio Player\Img\Closeo.bmp");MouseOver EndIf Else _GUICtrlButton_SetImage($Close, @ScriptDir & "\AutoIt Radio Player\Img\Close.bmp");Nothing EndIf If $Play = 1 Then If $Msg[4] = $PlayPause Then If $Msg[2] = 1 Then _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\stopp.bmp");MousePressed Else _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\stopo.bmp");MouseOver EndIf Else _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\stop.bmp");Nothing EndIf Else If $Msg[4] = $PlayPause Then If $Msg[2] = 1 Then _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\playp.bmp");MousePressed Else _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\playo.bmp");MouseOver EndIf Else _GUICtrlButton_SetImage($PlayPause, @ScriptDir & "\AutoIt Radio Player\Img\play.bmp");Nothing EndIf EndIf Sleep(100) WEnd ;1075 v0.0.0.8 30/04/2016 01:55

Hello, I am trying to figure out how to have autoit automatically check a radio button on a external application I have tried the following without any success. Opt("WinTitleMatchMode", 1) while true $win = winwaitactive("Night Utilities Setup") if $win <> "" Then ; msgbox(0,"","found") endif ;ControlClick($win, "Sunday", "[CLASS:WindowsForms10.BUTTON.app.0.33c0d9d:rbtnSunday]", "left", 1, 48, 13) ControlCommand($win, "Sunday", "[CLASS:WindowsForms10.BUTTON.app.0.33c0d9d:rbtnSunday]", "Check") wendHere is the window info >>>> Window <<<< Title:    Night Utilities Setup Class:    WindowsForms10.Window.8.app.0.33c0d9d Position:    110, 103 Size:    790, 547 Style:    0x16CB0000 ExStyle:    0x00050180 Handle:    0x0012020C >>>> Control <<<< Class: WindowsForms10.BUTTON.app.0.33c0d9d Instance: 38 ClassnameNN: WindowsForms10.BUTTON.app.0.33c0d9d38 Name: rbtnSunday Advanced (Class): [NAME:rbtnSunday] ID: 1049020 Text: Sunday Position: 63, 119 Size: 104, 16 ControlClick Coords: 48, 13 Style: 0x5600000B ExStyle: 0x00000000 Handle: 0x001001BC >>>> Mouse <<<< Position: 114, 170 Cursor ID: 0 Color: 0x2B2F37 >>>> StatusBar <<<< >>>> ToolsBar <<<< >>>> Visible Text <<<< &Run Now &Apply &Cancel &OK Programs To Run One Agency All Agencies Validate Cash Balances To Range All Clients Rename Codes Rebuild Sections 11:45:00 PM Saturday Use Customized Time For Batch Update From Files Delete All Files in AS_TEMP and AS_LOCK Batch Change Activity File Change Request Updates Real-Time Alerts IVANS Transmission Run Pseudo Post Prepare Company Reconciliations Validate Receivables Validate Client Balances Maintenance Options Dequeue Reports Database Maintenance Processing Mode Distributed Stand Alone File Selection FIM Only TAM Only All Files Maintenance Operations * You cannot scan with delete and pack Smaller Than Backup Data Files Before Pack Pack Data Files * Reindex Data Files Delete Unfixed Records * Fix Corrupt Records Print Scan Results Scan for Corrupt Records Day and Time 11:45:00 PM Sunday Saturday Friday Thursday Wednesday Tuesday Monday >>>> Hidden Text <<<< any help would be appreciated.

x

How to _IEFormElementRadioSelect a radio button that doesn't have a radio group's name or ID? _IEFormElementRadioSelect($o_object, $s_string, $s_name) <fieldset class="share-item"> <legend>share a link or news</legend> <div class="share-item-types"><span class="radio-group-label">Discussion type:</span> <span class="radio-group"> <input type="radio" class="fancy" id="discussion-type-general" name="forumtype" value="7" checked="true" tabindex="0"><label class="radio-label" for="discussion-type-general">General</label> <input type="radio" class="fancy" id="discussion-type-job" name="forumtype" value="5" tabindex="0"><label class="radio-label" for="discussion-type-job">Job</label> <input type="radio" class="fancy" id="discussion-type-promotion" name="forumtype" value="8" tabindex="0"><label class="radio-label" for="discussion-type-promotion">Promotion</label> </span> </div> <div class="share-item-group"> <input type="hidden" value="0" name="contentImageCount" id="share-img-total"> <input type="hidden" value="-1" name="contentImageIndex" id="share-img-selected-idx"> <input type="hidden" value="" name="contentImage" id="share-img-selected-url"> <input type="hidden" value="" name="contentEntityID" id="share-entity-id"> <input type="hidden" value="" name="contentUrl" id="share-entity-url"> <div id="share-mode" class="share-mode"> <div class="share-loading"></div> <div id="share-view" class="share-preview"></div> <div class="share-edit"> <ul id="share-edit-list" class="form"> <li id="share-edit-title-wrapper"> <input type="text" name="contentTitle" value="" id="share-edit-title" tabindex="0" class="text share-edit-title" maxlength="70"> </li> <li id="share-edit-meta"></li> <li id="share-edit-summary-wrapper"> <textarea name="contentSummary" id="share-edit-summary" tabindex="0" class="text" maxlength="250"></textarea> </li> <li id="share-include-photo-wrapper"> <input type="checkbox" name="contentImageIncluded" value="true" id="share-include-photo" class="check" checked="checked" tabindex="0"> <label for="share-include-photo">Include Photo</label> </li> <li> <input type="button" name="#" value="Save" class="btn-primary" id="share-edit-submit" tabindex="0"> or <a href="#" tabindex="0" id="share-edit-cancel">Cancel</a> </li> </ul> </div> </div> <div class="post-actions"> <div class="post-actions-row"> <div class="submit"> <input type="submit" name="postItem" value="Share" class="btn-primary share-submit disabled" id="share-submit" tabindex="0" disabled=""> </div> </div> </div> </div> </fieldset> This is what I want to select: <input type="radio" class="fancy" id="discussion-type-job" name="forumtype" value="5" tabindex="0"><label class="radio-label" for="discussion-type-job">Job</label>

Given the following GUI part: $Group1 = GUICtrlCreateGroup("Direction of label", 320, 216, 257, 73) $radDirectionHorizontal = GUICtrlCreateRadio("Horizontal", 328, 240, 113, 17) $radDirectionVertical = GUICtrlCreateRadio("Vertical", 328, 264, 113, 17) GUICtrlSetState(-1, $GUI_CHECKED) GUICtrlCreateGroup("", -99, -99, 1, 1) .. can I ask the group somehow (perhaps using a UDF) which radio button is selected ? Something like $selectedRadio = _RadioGroupGetSelected($Group1) .. and have index value returned (here, 1 or 2 as last item is checked) Or do I have to manually loop over each radioctrl ? Btw: application is for generation of labels in a layout program.

TinyShoutCastTuner v1.0.3.5 Based on the >LiveStreaming source code of trancexx. Listen Shoutcast Radios Stations with a station search engine by filters and an easy Favorites stations management. Thanks to monoceres, trancexx, Kip and Prog@ndy for AutoItObject. >AutoItObject 1.2.2.0 and >WinAPIEx are needed. As usual externals skin files are downloaded at first execution. See Tray Menu for more options. Search is a bit slow but successfull... Previous Downloads : 436 Update of 2012-11-05 source and executable are available in the Download Section Some Radios : FavoritesRadioStations.reg Hope you like it !