Leaderboard

Updated the Beta installer & portable files with the latest Lua scripts and SciTE V 5.3.7 Scintilla:5.3.6 Lexilla:5.2.6. Also the SciTEx86 & SciTEX64 are updated with the latest version.

OPENBARCODES project http://grandzebu.net/index.php?page=/informatique/codbar-en/codbar.htm all is under GPL - GNU license , open source and completely free... I translated original Pascal functions to PowerBuilder syntax which is very similar to AutoIt (BARCODE_powerbuilder.zip). Now I translated all barcode functions to AutoIt syntax (barcode_autoit.zip). BarCode UDF + example --> you must install aproppriate TTF fonts into Windows first. barcode.au3 barcode_test.au3 print.au3 code128.ttf code25I.ttf code39.ttf ean13.ttf Available functions: barcode_128() barcode_ean8() barcode_ean13() barcode_25i() barcode_39() ; TTF fonts must be installed in system first #AutoIt3Wrapper_run_obfuscator=y #Obfuscator_parameters=/so #include <ComboConstants.au3> #include <EditConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <WinAPI.au3> #include <print.au3> #include <barcode.au3> $barcode_test = GUICreate("BarCode Test", 601, 174, -1, -1) GUICtrlCreateLabel("Input:", 11, 10, 30, 17) $Input = GUICtrlCreateInput("", 41, 8, 120, 21) GUICtrlCreateLabel("Output:", 171, 10, 38, 17) $Output = GUICtrlCreateInput("", 209, 8, 120, 21) GUICtrlSetState(-1, $GUI_DISABLE) $print = GUICtrlCreateButton("Print", 340, 7, 39, 23) GUICtrlCreateLabel("Type:", 387, 10, 28, 17) $type = GUICtrlCreateCombo("", 417, 8, 91, 25, BitOR($CBS_DROPDOWNLIST,$CBS_AUTOHSCROLL)) GUICtrlSetData(-1, "Code 128|EAN 8|EAN 13|Code 2 of 5 i|Code 3 of 9", "Code 128") GUICtrlCreateLabel("Size:", 517, 10, 25, 17) $size = GUICtrlCreateCombo("", 543, 8, 47, 25, BitOR($CBS_DROPDOWNLIST,$CBS_AUTOHSCROLL)) GUICtrlSetData(-1, "12|18|24|36|48|60|72", "48") $barcode = GUICtrlCreateLabel("", 10, 39, 580, 130) GUICtrlSetFont(-1, 48, 400, 0, "Code 128") GUICtrlSetBkColor(-1, 0xFFFFFF) GUISetState(@SW_SHOW) GUIRegisterMsg($WM_COMMAND, "WM_COMMAND") While 1 $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $type ChangeFont() ApplyBarcode() Case $size ChangeFont() Case $print Print() EndSwitch WEnd Func WM_COMMAND($hWinHandle, $iMsg, $wParam, $lParam) If _WinAPI_HiWord($wParam) = $EN_CHANGE And _WinAPI_LoWord($wParam) = $Input Then ApplyBarcode() EndIf EndFunc Func ChangeFont() Switch GUICtrlRead($type) Case 'Code 128' $font_name = 'Code 128' Case 'EAN 8','EAN 13' $font_name = 'Code EAN13' Case 'Code 2 of 5 i' $font_name = 'Code 2 of 5 interleaved' Case 'Code 3 of 9' $font_name = 'Code 3 de 9' EndSwitch GUICtrlSetFont($barcode, GUICtrlRead($size), 400, 0, $font_name) EndFunc Func ApplyBarcode() Switch GUICtrlRead($type) Case 'Code 128' $barcode_data = barcode_128(GUICtrlRead($Input)) Case 'EAN 8' $barcode_data = barcode_ean8(GUICtrlRead($Input)) Case 'EAN 13' $barcode_data = barcode_ean13(GUICtrlRead($Input)) Case 'Code 2 of 5 i' $barcode_data = barcode_25i(GUICtrlRead($Input)) Case 'Code 3 of 9' $barcode_data = barcode_39(GUICtrlRead($Input)) EndSwitch GUICtrlSetData($Output, $barcode_data) GUICtrlSetData($barcode, $barcode_data) EndFunc ; print given text on default printer in given size by all available barcode types Func Print() $sPrinter = _GetDefaultPrinter() If $sPrinter = "" Then Return $hPrintDC = _WinAPI_CreateDC("winspool", $sPrinter) _InitPrinter($hPrintDC, "Printing Barcodes from AutoIt") ; print job name $hFont = _CreateFont_Simple('Arial', 12, $FW_BOLD) $hFontOld = _WinAPI_SelectObject($hPrintDC, $hFont) _TextOut_Centered($hPrintDC, 500, 'Input data: ' & GUICtrlRead($Input), 0xFF0000) _WinAPI_SelectObject($hPrintDC, $hFontOld) _WinAPI_DeleteObject($hFont) $hFont = _CreateFont_Simple('Courier', 10, $FW_NORMAL) $hFontOld = _WinAPI_SelectObject($hPrintDC, $hFont) _WinAPI_SetTextColor($hPrintDC, 0x000000) _TextOut_Centered($hPrintDC, 1400, 'Code 128') _TextOut_Centered($hPrintDC, 2400, 'EAN 8') _TextOut_Centered($hPrintDC, 3400, 'EAN 13') _TextOut_Centered($hPrintDC, 4400, 'Code 2 of 5 i') _TextOut_Centered($hPrintDC, 5400, 'Code 3 of 9') _WinAPI_SelectObject($hPrintDC, $hFontOld) _WinAPI_DeleteObject($hFont) $hFont = _CreateFont_Simple('Code 128', GUICtrlRead($size), $FW_NORMAL) $hFontOld = _WinAPI_SelectObject($hPrintDC, $hFont) _TextOut_Centered($hPrintDC, 1500, barcode_128(GUICtrlRead($Input))) _WinAPI_SelectObject($hPrintDC, $hFontOld) _WinAPI_DeleteObject($hFont) $hFont = _CreateFont_Simple('Code EAN13', GUICtrlRead($size), $FW_NORMAL) $hFontOld = _WinAPI_SelectObject($hPrintDC, $hFont) _TextOut_Centered($hPrintDC, 2500, barcode_ean8(GUICtrlRead($Input))) _WinAPI_SelectObject($hPrintDC, $hFontOld) _WinAPI_DeleteObject($hFont) $hFont = _CreateFont_Simple('Code EAN13', GUICtrlRead($size), $FW_NORMAL) $hFontOld = _WinAPI_SelectObject($hPrintDC, $hFont) _TextOut_Centered($hPrintDC, 3500, barcode_ean13(GUICtrlRead($Input))) _WinAPI_SelectObject($hPrintDC, $hFontOld) _WinAPI_DeleteObject($hFont) $hFont = _CreateFont_Simple('Code 2 of 5 interleaved', GUICtrlRead($size), $FW_NORMAL) $hFontOld = _WinAPI_SelectObject($hPrintDC, $hFont) _TextOut_Centered($hPrintDC, 4500, barcode_25i(GUICtrlRead($Input))) _WinAPI_SelectObject($hPrintDC, $hFontOld) _WinAPI_DeleteObject($hFont) $hFont = _CreateFont_Simple('Code 3 de 9', GUICtrlRead($size), $FW_NORMAL) $hFontOld = _WinAPI_SelectObject($hPrintDC, $hFont) _TextOut_Centered($hPrintDC, 5500, barcode_39(GUICtrlRead($Input))) _WinAPI_SelectObject($hPrintDC, $hFontOld) _WinAPI_DeleteObject($hFont) _DeInitPrinter($hPrintDC) EndFunc History: 2012-06-01 - only Code 128 translated 2012-06-03 - all functions translated 2012-06-04 - added Print + some inner optimizations Original idea comes from this topic: Previous downloads (AutoIt): 31 BARCODE_powerbuilder.zip barcode_autoit.zip Printing Barcodes from AutoIt.pdf

Hallo, thanks for all the work. I wanted to let everyone know of a problem I had with the display of a 25i barcode in barcode_test.au3. It happened on a specific barcode i needed - the barcode in the label was incorrectly displayed - while printing etc all was OK. Finally I found that my barcode started with a "&" (ampersand). The complete barcode is 05185160121072706 (control character 0 not included). The string for the label is É&3T]-+ig]Ê but the barcode displayed was É3T]-+ig]Ê the ampersand dissapeared. The solution was by defining the stile of the label with $SS_NOPREFIX. The hepltext for Label Styles says: Prevents interpretation of any ampersand (&) characters in the control's text as accelerator prefix characters. I added the style to the label definition and now the barcode was displayed correctly $barcode = GUICtrlCreateLabel("", 10, 39, 580, 130,$SS_NOPREFIX) I hope someone finds this useful

Pay particular attention to this line in the above link.