Leaderboard

This script allows you to 'browse' an array and view it's content. It's similar to the _ArrayDisplay() command, but this one has no limit on the number of dimensions. Nested array (array of arrays) are also allowed. (I'm been inspired by this @JohnOne's Post) Since multidimensional arrays can be considered as many bidimensional arrays grouped toghether, with this script you can view any of the many 2d arrays by selecting the dimension (the sheet number) you want to see through the ComboBoxes located at the top of the viewed sheet. regarding the arrays of array, if are present, those are listed on the treeview on the left side, where you can see their locations within the tree, and easily selected to be as well browsed by a click. I'm aware that there is a wide margin of aesthetic improvement, anyway the basic functionality works quite well. I hope it can be usefull ; Func _ArrayView() ; Will display content of arrays of any dimension, and even nested arrays if any ; #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <GuiListView.au3> #include <GUITreeView.au3> #include <GUIScrollBars.au3> #include <ScrollBarConstants.au3> #include <ComboConstants.au3> #include <GuiStatusBar.au3> ; -- build an example array (somewhat chaotic.. just to show something) -- ; 4D array (main array) Local $aA[10][5][6][3] For $d1 = 0 To 9 For $d2 = 0 To 4 For $d3 = 0 To 5 For $d4 = 0 To 2 $aA[$d1][$d2][$d3][$d4] = $d1 & "." & $d2 & "." & $d3 & "." & $d4 Next Next Next Next ; some 1D arrays with multi nested arrays Local $aMonths1 = ['January', 'February', 'March', 'April', 'May', 'June', 'July', 'August', 'September', 'October', 'November', 'December'] Local $aMonths2 = ["Januar", "Februar", "März", "April", "Mai", "Juni", "Juli", "August", "September", "Oktober", "November", "Dezember", $aMonths1] Local $aMonths3 = ["Sijecanj", "veljaca", "ožujka", "travanj", "Svibanj", "lipanj", "srpanj", "kolovoz", "rujan", "listopad", "studeni", "prosinac", $aMonths2] Local $aMonths4 = ["Janvier", "Février", "Mars", "Avril", "mai", "Juin", "Juillet", "Août", "Septembre", "Octobre", "Novembre", "Décembre", $aMonths3] Local $aMonths5 = ['Gennaio', 'Febbraio', 'Marzo', 'Aprile', 'Maggio', 'giu', 'Luglio', 'Agosto', 'Settembre', 'ottobre', 'Novembre', 'Dicembre', $aMonths4] Local $aMonths = ["Januar", "Februar", "März", "April", "Mai", "Juni", "Juli", "August", "September", "Oktober", "November", "Dezember", $aMonths5] ; a simple 2D array Local $aWeekdays = [['Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday', 'Sunday'], _ ['Lunedì', 'martedì', 'mercoledì', 'giovedì', 'venerdì', 'sabato', 'domenica'], _ ['Lundi', 'Mardi', 'Mercredi', 'Jeudi', 'Vendredi', 'Samedi', 'Dimanche'], _ ['Måndag', 'tisdag', 'onsdag', 'torsdag', 'fredag', 'lördag', 'söndag'], _ ['Poniedziałek', 'Wtorek', 'Środa', 'Czwartek', 'Piątek', 'Sobota', 'Niedziela'], _ ['Montag', 'Dienstag', 'Mittwoch', 'Donnerstag', 'Freitag', 'Samstag', 'Sonntag']] ; array $aMonths goes in cell [5][3] dimension [0][0] of main array $aA[5][3][0][0] = $aMonths ; array $aWeekdays goes in cell [6][3] dimension [0][0] of main array $aA[6][3][0][0] = $aWeekdays $aWeekdays[1][1] = $aWeekdays ; self nest $aWeekdays in cell [1][1] $aA[9][4][0][1] = $aWeekdays ; new $aWeekdays goes in cel [9][4] dimension [0][1] of main array _ArrayView($aA) ; show main array ; #FUNCTION# ==================================================================================================================== ; Name ..........: _ArrayView ; Description ...: Allows to view content of amono or multidimensional array. Array of arrays are also allowed ; Syntax ........: _ArrayView(Byref $_aInput) ; Parameters ....: $_aInput - The array that you want to 'Browse' ; Return values .: on success returns 1 ; on faillure returns 0 and set @Error to 1 (passed argument is not an array) ; Author ........: @Chimp ; Modified ......: ; Remarks .......: ; Related .......: ; Link ..........: ; Example .......: ; =============================================================================================================================== Func _ArrayView(ByRef $_aInput) If Not IsArray($_aInput) Then Return SetError(1, 0, 0) ; if error set @Error and return 0 Local $iGUIwidth = 900 Local $iGUIheight = 600 Local $iTreeWidth = 150 Local $iCombosZone = 60 Local $hGui = GUICreate("Array viewer", $iGUIwidth, $iGUIheight) Local $StatusBar = _GUICtrlStatusBar_Create($hGui), $iStatusBarheight = 23 Local $aSubscripts[64][4] ; It holds IDs of controls ; - creates all ComboBox in an embedded window. All controls are hidden at startup. ; - Only the necessary combo will be shown at run time. One combo for each dimension Local $hSubscriptSelectors = GUICreate('', $iGUIwidth - $iTreeWidth - 6, $iCombosZone - 2, $iTreeWidth + 4, 2, BitOR($WS_CHILD, $WS_HSCROLL), -1, $hGui) ; GUISetBkColor(0xEEFFEE) For $i = 0 To 63 ; Create the labels $aSubscripts[$i][0] = GUICtrlCreateLabel('D' & $i + 1, ($i * 60) + 8, 1) GUICtrlSetFont(-1, 10, 0, 0, "Courier new") GUICtrlSetState(-1, $GUI_HIDE) ; Labels will be hidden at startup. $aSubscripts[$i][1] = GUICtrlCreateLabel('[', ($i * 60), 18) GUICtrlSetFont(-1, 13, 800) GUICtrlSetState(-1, $GUI_HIDE) $aSubscripts[$i][3] = GUICtrlCreateLabel(']', ($i * 60) + 50, 18) GUICtrlSetFont(-1, 13, 800) GUICtrlSetState(-1, $GUI_HIDE) Next For $i = 0 To 63 ; Create the ComboBox (creates separatelly from labels so that ControlIDs of ComboBaxes has it's own sequence) GUICtrlSetState(-1, $GUI_HIDE) ; ComboBox will be hidden at startup. If $i < 2 Then ; all the content of the first 2 dimensions is already shown in the listview (no need of ComboBox) $aSubscripts[$i][2] = GUICtrlCreateCombo("---", ($i * 60) + 8, 17, 40, -1, $CBS_DROPDOWNLIST) GUICtrlSetState(-1, $GUI_DISABLE) Else $aSubscripts[$i][2] = GUICtrlCreateCombo("0", ($i * 60) + 8, 17, 40, -1, $CBS_DROPDOWNLIST) EndIf GUICtrlSetFont(-1, 8, 800) GUICtrlSetState(-1, $GUI_HIDE) ; ComboBox hidden at startup. Next GUISwitch($hGui) ; back to main window ; Create the TreeView structure $hTree = GUICtrlCreateTreeView(2, 2, $iTreeWidth - 2, $iGUIheight - 4 - $iStatusBarheight, BitOR($TVS_HASBUTTONS, $TVS_HASLINES, $TVS_LINESATROOT, $TVS_DISABLEDRAGDROP, $TVS_SHOWSELALWAYS), $WS_EX_CLIENTEDGE) Local $hRoot = _GUICtrlTreeView_Add($hTree, 0, "Root") ; first insert the root key in treeview _ArrayTraverse($_aInput, $hTree, $hRoot) ; Search for SubArrays (array in array) ; Create the ListView Local $idListview = GUICtrlCreateListView('', $iTreeWidth + 2, $iCombosZone + 2, $iGUIwidth - $iTreeWidth - 4, $iGUIheight - $iCombosZone - 4 - $iStatusBarheight, Default, BitOR($LVS_EX_DOUBLEBUFFER, $LVS_EX_GRIDLINES)) ; If Array has many dimensions, and so all ComboBoxes doesn't fit in window, this allows to scroll GUIRegisterMsg($WM_HSCROLL, "WM_HSCROLL") _GUIScrollBars_Init($hSubscriptSelectors, 60 * UBound($_aInput, 0), 0) GUISetState(@SW_SHOW, $hGui) GUISetState(@SW_SHOW, $hSubscriptSelectors) ; Main Loop until the user exits. ; ------------------------------- Local $sLastWholeKey, $sWholeKey, $vContent, $bRebuild While 1 $Msg = GUIGetMsg() Switch $Msg Case $GUI_EVENT_CLOSE GUIDelete($hGui) ExitLoop Case $aSubscripts[2][2] To $aSubscripts[63][2] ; some ComboBox has changed _ArrayDisplayByLayer($vContent, $idListview, $aSubscripts, False) EndSwitch ; $sWholeKey = _GUICtrlTreeView_GetTree($hTree, _GUICtrlTreeView_GetSelection($hTree)) If $sLastWholeKey <> $sWholeKey Then ; clicked on a new KeyPath or (again) on the one already selected? GUISetCursor(15, 1) ; set cursor to "wait" ; Adapt the TreePath to the array access syntax $sElement = _TreePathParser($sWholeKey) ; address of main array or subarray to peek _GUICtrlStatusBar_SetText($StatusBar, StringReplace($sWholeKey, '|', '->') & ' --> ' & $sElement) ; show the 'address' of selected element on statusbar $vContent = Execute(_TreePathParser($sWholeKey)) _ArrayDisplayByLayer($vContent, $idListview, $aSubscripts, True) _GUICtrlTreeView_ClickItem($hTree, _GUICtrlTreeView_GetSelection($hTree)) $sLastWholeKey = $sWholeKey ; keep track of already clicked KeyPath so we will not redraw the same Array if clicked again GUISetCursor() ; cursor back to default EndIf ; WEnd Return SetError(0, 0, 1) ; if no errors return 1 EndFunc ;==>_ArrayView Func _ArrayDisplayByLayer(ByRef $_aInput, ByRef $idListview, ByRef $aSubscripts, $bRebuild = False) Opt('GUIOnEventMode', 1) ; Disable GUIGetMsg() so is not fired while redrawing ComboBoxes. Local $sTarghet = '$_aInput[$y]' Local $iDimensions = UBound($_aInput, 0) Local $iRows = UBound($_aInput, 1) Local $iColumnsCount, $iColumns = UBound($_aInput, 2) Local $sSubscripts = '' ; Clear the ListView _GUICtrlListView_DeleteAllItems($idListview) If $bRebuild Then ; (Re)Create the ListView $iColumnsCount = _GUICtrlListView_GetColumnCount($idListview) If $iColumnsCount Then For $i = $iColumnsCount To 1 Step -1 _GUICtrlListView_DeleteColumn($idListview, $i - 1) Next EndIf ; Hide and clear all ComboBox For $i = 0 To 63 GUICtrlSetState($aSubscripts[$i][0], $GUI_HIDE) ; Header GUICtrlSetState($aSubscripts[$i][1], $GUI_HIDE) ; '[' GUICtrlSetState($aSubscripts[$i][2], $GUI_HIDE) ; ComboBox Handle GUICtrlSetData($aSubscripts[$i][2], '') ; clear ComboBox items GUICtrlSetState($aSubscripts[$i][3], $GUI_HIDE) ; ']' Next ; (Re)Build the ListView's frame If $iDimensions = 1 Then $iColumns = 1 Else $iColumns = UBound($_aInput, 2) ; nr. of columns in the ListView (second dimension) $sTarghet &= '[$x]' EndIf _GUICtrlListView_AddColumn($idListview, 'Row') For $i = 1 To $iColumns _GUICtrlListView_AddColumn($idListview, 'Col ' & $i - 1, 100) Next For $i = 0 To $iDimensions - 1 ; Show only necessary ComboBox (one for each dimension) GUICtrlSetState($aSubscripts[$i][0], $GUI_SHOW) ; Header GUICtrlSetState($aSubscripts[$i][1], $GUI_SHOW) ; '[' GUICtrlSetState($aSubscripts[$i][2], $GUI_SHOW) ; ComboBox Handle GUICtrlSetState($aSubscripts[$i][3], $GUI_SHOW) ; ']' If $i > 1 Then $sTarghet &= '[0]' ; dimensions over the second all setting to 0 (begin showing first lyer) $sSubscripts = "" For $iSubscript = 0 To UBound($_aInput, $i + 1) - 1 $sSubscripts &= $iSubscript & '|' Next GUICtrlSetData($aSubscripts[$i][2], StringTrimRight($sSubscripts, 1)) ControlFocus('', '', $aSubscripts[$i][2]) ControlSend('', '', $aSubscripts[$i][2], 0) EndIf Next Else ; Just refill the listview with data from the Array dimension selected by ComboBoxes ; Create the 'dimension' string $sTarghet &= '[$x]' For $i = 2 To $iDimensions - 1 $sTarghet &= '[' & GUICtrlRead($aSubscripts[$i][2]) & ']' Next $iColumns = UBound($_aInput, 2) EndIf For $y = 0 To $iRows - 1 GUICtrlCreateListViewItem('', $idListview) _GUICtrlListView_SetItemText($idListview, $y, '[' & $y & ']', 0) ; row number For $x = 0 To $iColumns - 1 $vCellContent = Execute($sTarghet) If IsArray($vCellContent) Then _GUICtrlListView_SetItemText($idListview, $y, '{array}', $x + 1) Else _GUICtrlListView_SetItemText($idListview, $y, $vCellContent, $x + 1) EndIf Next Next Opt('GUIOnEventMode', 0) ; reenable GUIGetMsg() EndFunc ;==>_ArrayDisplayByLayer Func _ArrayTraverse(ByRef $aMyArray, ByRef $hTree, $hParent) #cs since this is a recursive Function, the same Func runs many times, self called from within itself. The variables declared as Global at the top of the script are able to be accessed from any instance of the function, whereas the variable declared (as Local) within the function may be different for each instance of the function. #ce If Not IsArray($aMyArray) Then Return SetError(1, 0, -1) ; we have to know how many nested for-next loops we need ; that is one loop for each dimension Local $iDimensions = UBound($aMyArray, 0) ; number of nested for-next loops Local $sArrayPointer = "$aMyArray", $sElement For $i = 0 To $iDimensions - 1 $sArrayPointer &= '[$aLoops[' & $i & '][2]]' Next ; ----------------------------------------------------------------------------------- ; This is a nested For-Next loops simulator with variable depth of nested loops ; pass a 2D zero based array[n][3] ; with as many records as nested loops needed ; as following: ; ; Example; For $i = start To end ; ----- --- ; [n][0] = Start value ; [n][1] = End value ; [n][2] = actual loop counter (at startup is = to Start value [n][0]) ; ; --- Initializes custom nested For-Next loops -------------------------------------- Local $aLoops[$iDimensions][3] ; nr of nested loops is $iDimensions For $i = 0 To $iDimensions - 1 $aLoops[$i][0] = 0 ; Start value $aLoops[$i][1] = UBound($aMyArray, $i + 1) - 1 ; End value $aLoops[$i][2] = $aLoops[$i][0] ; actual loop counter Next ; ----------------------------------------------------------------------------------- Local $x, $vContent Do $vContent = Execute($sArrayPointer) If IsArray($vContent) Then ; here there is a Nested array, populate the TreeView with a child element $sElement = "" For $i = 0 To $iDimensions - 1 $sElement &= '[' & $aLoops[$i][2] & ']' Next Local $hNode = _GUICtrlTreeView_AddChild($hTree, $hParent, $sElement) ; recursive call for this nested array to search if there are any further nested arrays _ArrayTraverse($vContent, $hTree, $hNode) ; <-- recursive call EndIf ; ------------------------------------------------------------------------------- $x = UBound($aLoops) - 1 $aLoops[$x][2] += 1 While ($aLoops[$x][2] > $aLoops[$x][1]) ; check if and which nested loops are out of bound $aLoops[$x][2] = $aLoops[$x][0] ; reset the counter of this loop ($x) $x -= 1 ; check next outer nest If $x < 0 Then ExitLoop ; if we have finished all nested loops then Exit $aLoops[$x][2] += 1 ; when a deeper loop complete, increment the outer one WEnd Until $x < 0 ; If no more nested loops then exit EndFunc ;==>_ArrayTraverse ; Tree Path to Subscript Func _TreePathParser($Input) Local $sReturn = '$_aInput' Local $aSubArrays = StringSplit($Input, '|', 3) If UBound($aSubArrays) > 1 Then For $i = 1 To UBound($aSubArrays) - 1 $sReturn &= $aSubArrays[$i] If $i < UBound($aSubArrays) - 1 Then $sReturn = '(' & $sReturn & ')' Next EndIf Return $sReturn EndFunc ;==>_TreePathParser ; this will allow the scrolling of window containing ComboBoxes (if number of Combo doesn't fit in window) ; see _GUIScrollBars_Init() in the Help of AutoIt Func WM_HSCROLL($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $lParam Local $iScrollCode = BitAND($wParam, 0x0000FFFF) Local $iIndex = -1, $iCharX, $iPosX Local $iMin, $iMax, $iPage, $iPos, $iTrackPos For $x = 0 To UBound($__g_aSB_WindowInfo) - 1 If $__g_aSB_WindowInfo[$x][0] = $hWnd Then $iIndex = $x $iCharX = $__g_aSB_WindowInfo[$iIndex][2] ExitLoop EndIf Next If $iIndex = -1 Then Return 0 ; ; Get all the horizontal scroll bar information Local $tSCROLLINFO = _GUIScrollBars_GetScrollInfoEx($hWnd, $SB_HORZ) $iMin = DllStructGetData($tSCROLLINFO, "nMin") $iMax = DllStructGetData($tSCROLLINFO, "nMax") $iPage = DllStructGetData($tSCROLLINFO, "nPage") ; Save the position for comparison later on $iPosX = DllStructGetData($tSCROLLINFO, "nPos") $iPos = $iPosX $iTrackPos = DllStructGetData($tSCROLLINFO, "nTrackPos") #forceref $iMin, $iMax Switch $iScrollCode Case $SB_LINELEFT ; user clicked left arrow DllStructSetData($tSCROLLINFO, "nPos", $iPos - 1) Case $SB_LINERIGHT ; user clicked right arrow DllStructSetData($tSCROLLINFO, "nPos", $iPos + 1) Case $SB_PAGELEFT ; user clicked the scroll bar shaft left of the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iPos - $iPage) Case $SB_PAGERIGHT ; user clicked the scroll bar shaft right of the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iPos + $iPage) Case $SB_THUMBTRACK ; user dragged the scroll box DllStructSetData($tSCROLLINFO, "nPos", $iTrackPos) EndSwitch ; // Set the position and then retrieve it. Due to adjustments ; // by Windows it may not be the same as the value set. DllStructSetData($tSCROLLINFO, "fMask", $SIF_POS) _GUIScrollBars_SetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO) _GUIScrollBars_GetScrollInfo($hWnd, $SB_HORZ, $tSCROLLINFO) ;// If the position has changed, scroll the window and update it $iPos = DllStructGetData($tSCROLLINFO, "nPos") If ($iPos <> $iPosX) Then _GUIScrollBars_ScrollWindow($hWnd, $iCharX * ($iPosX - $iPos), 0) Return $GUI_RUNDEFMSG EndFunc ;==>WM_HSCROLL

Sound like a job for a regulair expression, this is a small online cours to learn it http://regexone.com/ AutoIt support it totaly. I've made a program where you can test the regular expression (made in autoit with source code)

helpus, This seems to work: Global $aFiles[] = [3, "info000001", "info999999", "Keep_me"] For $i = 1 To $aFiles[0] If StringRegExp($aFiles[$i], "(?i)^info\d{6}$") Then ConsoleWrite("Delete: " & $aFiles[$i] & @CRLF) Else ConsoleWrite("Keeping: " & $aFiles[$i] & @CRLF) EndIf Next It checks if the file name is "info" followed by 6 digits. M23

1) The selections are simple picture controls, witch are created around the klicked control. (De Dot is only a picture.) Yeah it would also be possible with GDI 2) Check this example from the german forum: The formstudio does it exactly like this. ; *** Start added by AutoIt3Wrapper *** #include <StaticConstants.au3> ; *** End added by AutoIt3Wrapper *** #Region ;**** Directives created by AutoIt3Wrapper_GUI **** #AutoIt3Wrapper_Add_Constants=n #EndRegion ;**** Directives created by AutoIt3Wrapper_GUI **** #include <ListviewConstants.au3> #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include <SliderConstants.au3> #Include <GuiListView.au3> #Include <Array.au3> #Include <File.au3> #Include <Misc.au3> Opt("GUIOnEventMode", 1) ;Global $posXStart, $posYStart, $posXStop, $posYStop, $pic, $hGui, $Pos_M2 = MouseGetPos() $hGUI = GUICreate("Transparent", 575, 510) GUISetOnEvent($GUI_EVENT_CLOSE, "_Ex") $insert = GuiCtrlCreateButton("Insert Pic" ,10,10) GuiCtrlSetOnEvent(-1, "_insert") $Pic=GUICtrlCreatePic("", 50, 50) GuiCtrlSetOnEvent(-1, "_DragMe") $hsplitter1 = GUICtrlCreateLabel("",270, 125, 8, 205,-1,$SS_BLACKFRAME) ;GUICtrlSetColor(-1,0xffffff) ;GUICtrlSetResizing(-1, $GUI_DOCKLEFT +$GUI_DOCKSIZE + $GUI_DOCKTOP) GUICtrlSetOnEvent($hsplitter1,"_DragMe") $hlabel = GUICtrlCreateLabel("Verschieb mich",20,120,100,25) GUICtrlSetOnEvent($hlabel,"_DragMe") GUISetState(@SW_SHOW) While 1 sleep(100) WEnd Func _insert() GuiCtrlDelete($pic) $bild = FileOpenDialog("Wählen Sie eine Datei aus!", @WindowsDir & "\", "Bilder (*.jpg;*.bmp)", 1 + 4 ) $Pic = GUICtrlCreatePic($bild, 150, 150) GuiCtrlSetOnEvent(-1, "_DragMe") EndFunc Func _DragMe() ;Orginal zum verschieben von 1 Bild von ChaosKeks Local $Pos_C, $Pos_M, $Pos_M2, $Opt_old Local $dll = DllOpen("user32.dll") $Opt_old = Opt('MouseCoordMode', 0) $Pos_C = ControlGetPos($hGui, "", @GUI_CtrlId);$pic) $Pos_M = MouseGetPos() $Pos_W = WinGetPos($hGui) $x_Offset = $Pos_M[0] - $Pos_C[0] $y_Offset = $Pos_M[1] - $Pos_C[1] _MouseTrap($Pos_W[0]+$x_Offset,$Pos_W[1]+$y_Offset,$Pos_W[0]+$Pos_W[2],$Pos_W[1]+$Pos_W[3]) While _IsPressed('01', $dll) $Pos_M = MouseGetPos() If $Pos_M <> $Pos_M2 Then GUICtrlSetPos(@GUI_CtrlId,$Pos_M[0] - $x_Offset, $Pos_M[1] - $y_Offset) sleep(10) EndIf $Pos_M = $Pos_M2 sleep(50) WEnd DllClose($dll) Opt('MouseCoordMode', $Opt_old) _MouseTrap() EndFunc Func _Ex() Exit EndFUnc 3) The Toolbox on the left side is a Listview with Icons.

Hello. I did create these few functions several months ago. I post here, if it can interest someone. These functions based on WMI queries allow you to manage printers : add / delete printer, driver, port, or obtain configuration, set default printer ... I let you discover it with the code. Here is the list of the available functions : _PrintMgr_AddLocalPort _PrintMgr_AddLPRPort _PrintMgr_AddPrinter _PrintMgr_AddPrinterDriver _PrintMgr_AddTCPIPPrinterPort _PrintMgr_AddWindowsPrinterConnection _PrintMgr_CancelAllJobs _PrintMgr_CancelPrintJob _PrintMgr_EnumPorts _PrintMgr_EnumPrinter _PrintMgr_EnumPrinterConfiguration _PrintMgr_EnumPrinterDriver _PrintMgr_EnumPrinterProperties _PrintMgr_EnumPrintJobs _PrintMgr_EnumTCPIPPrinterPort _PrintMgr_Pause _PrintMgr_PortExists _PrintMgr_PrinterExists _PrintMgr_PrinterSetComment _PrintMgr_PrinterSetDriver _PrintMgr_PrinterSetPort _PrintMgr_PrinterShare _PrintMgr_PrintTestPage _PrintMgr_RemoveLocalPort _PrintMgr_RemoveLPRPort _PrintMgr_RemovePrinter _PrintMgr_RemovePrinterDriver _PrintMgr_RemoveTCPIPPrinterPort _PrintMgr_RenamePrinter _PrintMgr_Resume _PrintMgr_SetDefaultPrinter And some examples : #include <Array.au3> #include "PrintMgr.au3" _Example() Func _Example() ; Remove a printer called "My old Lexmark printer" : _PrintMgr_RemovePrinter("My old Lexmark printer") ; Remove the driver called "Lexmark T640" : _PrintMgr_RemovePrinterDriver("Lexmark T640") ; Remove the TCP/IP printer port called "TCP/IP" _PrintMgr_RemoveTCPIPPrinterPort("MyOLDPrinterPort") ; Add a driver, called "Samsung ML-451x 501x Series", and driver inf file is ".\Samsung5010\sse2m.inf" _PrintMgr_AddPrinterDriver("Samsung ML-451x 501x Series", "Windows NT x86", @ScriptDir & "\Samsung5010", @ScriptDir & "\Samsung5010\sse2m.inf") ; Add a TCP/IP printer port, called "MyTCPIPPrinterPort", with IPAddress = 192.168.1.10 and Port = 9100 _PrintMgr_AddTCPIPPrinterPort("MyTCPIPPrinterPort", "192.168.1.10", 9100) ; Add a printer, give it the name "My Printer", use the driver called "Samsung ML-451x 501x Series" and the port called "MyTCPIPPrinterPort" _PrintMgr_AddPrinter("My Printer", "Samsung ML-451x 501x Series", "MyTCPIPPrinterPort") ; Set the printer called "My Printer" as default printer _PrintMgr_SetDefaultPrinter("My Printer") ; Connect to the shared printer "\\192.168.1.1\HPDeskjetColor") _PrintMgr_AddWindowsPrinterConnection("\\192.168.1.1\HPDeskjetColor") ; List all installed printers Local $aPrinterList = _PrintMgr_EnumPrinter() _ArrayDisplay($aPrinterList) ; List all printers configuration Local $aPrinterConfig = _PrintMgr_EnumPrinterConfiguration() _ArrayDisplay($aPrinterConfig) ; List all installed printer drivers Local $aDriverList = _PrintMgr_EnumPrinterDriver() _ArrayDisplay($aDriverList) ; Retrieve the printer configuration for the printer called "Lexmark T640" $aPrinterConfig = _PrintMgr_EnumPrinterConfiguration("Lexmark T640") _ArrayDisplay($aPrinterConfig) ; Add a local printer port (for a file output) _PrintMgr_AddLocalPort("c:\temp\output.pcl") ; Remove the local port _PrintMgr_RemoveLocalPort("c:\temp\output.pcl") ; Enum a print job Local $aJobList = _PrintMgr_EnumPrintJobs() _ArrayDisplay($aJobList) EndFunc ;==>_Example Download link : PrintMgr_Example.au3 PrintMgr.au3

Anyway when using regex the more precise are with requirements, the best it works $txt = BinaryToString(InetRead("http://youtubertr.com/ipadres.html", 1) ) $IP = StringRegExpReplace($txt, '(?s).*Your adress:\h*([\d.]+).*', "$1") Msgbox(0,"", $IP)

a possible workaround....(?): #include <array.au3> Local $aContainerArray[2] Local $aInternalArray_0[2] = ["Internal-0-0", "Internal-0-1"] Local $aInternalArray_1[2] = ["Internal-1-0", "Internal-1-1"] $aContainerArray[0] = $aInternalArray_0 $aContainerArray[1] = $aInternalArray_1 Local $this = ($aContainerArray[0])[1] ConsoleWrite("1 element of InternalArray_0: " & $this & @CRLF) ConsoleWrite("0 element of InternalArray_1: " & ($aContainerArray[1])[0] & @CRLF) ConsoleWrite("0 element of InternalArray_0: " & ($aContainerArray[0])[1] & @CRLF) _ArrayDisplay($aContainerArray[0], 'Before') _SubArraySet($aContainerArray[0], 0, 'Animal') _ArrayDisplay($aContainerArray[0], 'After') Func _SubArraySet(ByRef $subarray, $iElement, $value) $subarray[$iElement] = $value EndFunc ;==>Test P.S, Since $subarray is passe ByRef it shouldn't be extracted, but accessed directly in the $aContainerArray...?? .. or not?

OK, so try this instead - it's the page I used to test with: Change your color to: Global $color1 = 0xFFFB00 Run the code and then point your browser up to this page: https://nurturingacreativeworld.files.wordpress.com/2014/12/195057182_640.jpg The middle yellow square is the target color.

I wasn't able to visit your website due to our web filters at work, but I did notice a couple of issues with your code. Try the changes below and see if it works better for you: HotKeySet("{F4}", "MyExit") $pos = MouseGetPos() Global $color1 = 0xDEDEDE Global $color2 = PixelGetColor ; Not correct syntax and color needs to be grabbed after each mouse movment While(1) $posx = random(4,1915) $posy = random(184,1014) MouseMove( $posx, $posy) sleep(1000) $pos = MouseGetPos() ; You weren't updating your mouse pos after the mouse was moved $color2 = PixelGetColor($pos[0], $pos[1]) If $color1 == $color2 Then ; You weren't valuing $color2 properly before the While Msgbox(0,"Got it", "Thats my color") ; added to help troublehsoot MouseClick("Left") sleep(200) Else sleep(100) EndIf WEnd func MyExit() Exit EndFunc

youtuber, If all you want is to extract the IP then this should work: #include <Array.au3> $sSnippet = '<div class="col-sm-5 text-right">' & @CRLF & _ '<a href="/">IP Your adress: 113.228.141.182</a>' & @CRLF & _ '</div>' $aIP = StringRegExp($sSnippet, ":\s(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})<", 3) _ArrayDisplay($aIP, "", Default, 8) And if you had explained yourself clearly initially we might have got there quicker. M23

@ISI360 , Wow !, Thanks for the fast and clear reply. Let me read the example. Edit - Tested that code. Superb ! Now it's time to read the code. Thanks a lot.

youtuber, Please do not hijack unrelated threads - just start a new one as I have now done for you. What happened when you tried it? M23

thanks True, I have not seen. But it also has nothing to do with the set file atribute. Run the example 2 times: #include <FileConstants.au3> Example() Func Example() Local $sFile = @TempDir & '\MyHiddenFile.txt' If Not FileExists($sFile) Then _WriteFile($sFile, 'Hidden File created. Run the script again.', $FO_OVERWRITE) FileSetAttrib($sFile, "+H") Else _WriteFile($sFile, 'Write to file WITH hidden Attribute and mode $FO_OVERWRITE.', $FO_OVERWRITE) _WriteFile($sFile, 'Write to file WITH hidden Attribute and mode $FO_APPEND.', $FO_APPEND) FileDelete($sFile) EndIf EndFunc Func _WriteFile($sFilePath, $sText, $iMode) Local $hFileOpen = FileOpen($sFilePath, $iMode) If $hFileOpen = -1 Then ConsoleWrite('FileOpen fails for: "' & $sText & '"' & @CRLF) Return False EndIf If FileWrite($hFileOpen, $sText) And FileClose($hFileOpen) Then ConsoleWrite('"' & $sText & '" successfully written.' & @CRLF) Else ConsoleWrite('error while writing the content: "' & $sText & '"' & @CRLF) EndIf EndFunc first run: "Hidden File created. Run the script again." successfully written. second run: FileOpen fails for: "Write to file WITH hidden Attribute and mode $FO_OVERWRITE." "Write to file WITH hidden Attribute and mode $FO_APPEND." successfully written. OK, but why it works with $FO_APPEND but not with $FO_OVERWRITE? Both methods write to the same file.. Is it a bug or a feature?

maybe : $hSplash = SplashTextOn("Title", "Message goes here.", -1, -1, -1, @DesktopHeight - 200, 4, "", 24) Sleep(3000) If Not WinActive($hSplash) Then WinActivate($hSplash) Sleep(3000) SplashOff()

It's a old topic. I think is not a bug. But you can use Windows api. Autoit FileOpen does not mix GENERIC_READ with GENERIC_WRITE. Saludos

You're welcome