Leaderboard

[NEW VERSION] - 19 May 14 Added: - 1. A new function _GUIFrame_ResizeState to indicate when frames have been resized and the resizing is complete. The idea is to help users who fill frames with elements which require heavy processing (e.g. GDI images) and where continually rewriting the content would cause severe slowdowns. The function is called in the script idle loop and returns an array of flags indicating that a resizing action is complete. - 2. A new parameter ($fShowWindow) in the _GUIFrame_Create function. A few people have found that the frames do not always appear on creation - particularly if the GUI does not have focus during this process. KaFu came up with a workaround, not approved by the AutoIt devs, using the API to confirm the frame display. Setting this new parameter to True uses the API call - use it at your own risk and peril! Fixed: A couple of minor bugs which no-one had noticed - and now never will. New code below and in the attached zip. Previous changes: Changelog.txt Before we start, my sincere thanks to Kip who wrote the first version of this UDF and who very kindly allowed me to build on it to produce this new version. Many GUIs are divided into frames, where you can drag a separator bar to alter the relative sizes of the elements displayed within the GUI. Think of an Explorer window where the folder list is on one side and the files in the selected folder on the other - or SciTE with its editing and Director areas. The GUIFrame UDF allows you to divide your own GUIs into 2 frames with a separator bar. - The frames can be full-frame or set to a user-defined position and size within the GUI. - The minimum size of each frame can be specified. - The separator bar can be horizontal or vertical and its size and initial position set. - The frames can resize as the main GUI resizes or can remain at their original position and size. - You can even divide existing frames into further frames until you run out of space. - x86 and x64 compatible. [New] The frames themselves are normal AutoIt GUIs. You can colour them and create controls within them just as you would in any other script - functions are provided for easy navigation between them (think of GUISwitch). Here is an example script to show the UDF working: #include <guiconstantsex.au3> #include <windowsconstants.au3> #include "GUIFrame.au3" Global $iSep_Pos $hGUI = GUICreate("GUI_Frame Example 1", 500, 500, -1, -1, BitOR($WS_MINIMIZEBOX, $WS_MAXIMIZEBOX, $WS_SIZEBOX)) GUISetState() ; Create a 1st level frame $iFrame_A = _GUIFrame_Create($hGUI) _GUIFrame_SetMin($iFrame_A, 50, 100) _GUIFrame_Switch($iFrame_A, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_A, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetState(-1, $GUI_DISABLE) $hButton_1 = GUICtrlCreateButton("Pos Sep", 10, 10, 50, 30) ; Create a 2nd level frame $iFrame_B = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_A, 1), 1) GUISetBkColor(0x00FF00, _GUIFrame_GetHandle($iFrame_B, 1)) _GUIFrame_SetMin($iFrame_B, 100, 100) _GUIFrame_Switch($iFrame_B, 1) $hButton_2 = GUICtrlCreateButton("Pos Sep", 10, 10, 50, 30) ; Create a 3rd level frame $iFrame_C = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_B, 2)) _GUIFrame_Switch($iFrame_C, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_C, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xD0D000) ; Create a 4th level frame $iFrame_D = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_C, 1), 1) _GUIFrame_Switch($iFrame_D, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_D, 1)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0x00FFFF) _GUIFrame_Switch($iFrame_D, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_D, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF00FF) ; Set resizing flag for all created frames _GUIFrame_ResizeSet(0) ; Create a non-resizable 2nd level frame $iFrame_E = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_B, 1), 0, 0, 5, 5, 55, 200, 100) _GUIFrame_Switch($iFrame_E, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_E, 1)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF8000) _GUIFrame_Switch($iFrame_E, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_E, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xD0C0D0) ; Register the $WM_SIZE handler to permit resizing _GUIFrame_ResizeReg() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ; The UDF does all the tidying up as you exit Exit Case $hButton_1 _GUIFrame_SetSepPos($iFrame_A, 300) $iSep_Pos = _GUIFrame_GetSepPos($iFrame_A) GUICtrlSetData($hButton_1, $iSep_Pos) Sleep(1000) GUICtrlSetData($hButton_1, "Sep Pos") Case $hButton_2 $iRet = _GUIFrame_SetSepPos($iFrame_B, 310) $iSep_Pos = _GUIFrame_GetSepPos($iFrame_ GUICtrlSetData($hButton_2, $iSep_Pos) Sleep(1000) GUICtrlSetData($hButton_2, "Sep Pos") EndSwitch WEnd The UDF uses the WM_SIZE message sent by the original GUIs to determine when to resize frames. If you want to register the same message within your script, you can still use this UDF. All you have to do is call a specific UDF function within your own message handler, as you can see here: #include <guiconstantsex.au3> #include <windowsconstants.au3> #include "GUIFrame.au3" Global $iSep_Pos $hGUI = GUICreate("GUI_Frame Example 2", 500, 500, -1, -1, BitOR($WS_MINIMIZEBOX, $WS_MAXIMIZEBOX, $WS_SIZEBOX)) GUISetState() ; Register WM_SIZE to simulate the script requiring it GUIRegisterMsg($WM_SIZE, "_WM_SIZE") ; Create a 1st level frame $iFrame_A = _GUIFrame_Create($hGUI) _GUIFrame_SetMin($iFrame_A, 50, 100) _GUIFrame_Switch($iFrame_A, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_A, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetState(-1, $GUI_DISABLE) $hButton_1 = GUICtrlCreateButton("Sep Pos", 10, 10, 50, 30) ; Create a 2nd level frame $iFrame_B = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_A, 1), 1) GUISetBkColor(0x00FF00, _GUIFrame_GetHandle($iFrame_B, 1)) _GUIFrame_SetMin($iFrame_B, 100, 100) _GUIFrame_Switch($iFrame_B, 1) $hButton_2 = GUICtrlCreateButton("Pos Sep", 10, 10, 50, 30) ; Create a 3rd level frame $iFrame_C = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_B, 2)) _GUIFrame_Switch($iFrame_C, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_C, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xD0D000) ; Create a 4th level frame $iFrame_D = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_C, 1), 1) _GUIFrame_Switch($iFrame_D, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_D, 1)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0x00FFFF) _GUIFrame_Switch($iFrame_D, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_D, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF00FF) ; Set resizing flag for all created frames _GUIFrame_ResizeSet(0) ; Create a non-resizable 2nd level frame $iFrame_E = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_B, 1), 0, 0, 5, 5, 55, 200, 100) _GUIFrame_Switch($iFrame_E, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_E, 1)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF8000) _GUIFrame_Switch($iFrame_E, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_E, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xD0C0D0) ; DO NOT Register the $WM_SIZE handler to permit resizing as the message is already registered ;_GUIFrame_ResizeReg() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ; The UDF does all the tidying up as you exit Exit Case $hButton_1 _GUIFrame_SetSepPos($iFrame_A, 300) $iSep_Pos = _GUIFrame_GetSepPos($iFrame_A) GUICtrlSetData($hButton_1, $iSep_Pos) Sleep(1000) GUICtrlSetData($hButton_1, "Sep Pos") Case $hButton_2 $iRet = _GUIFrame_SetSepPos($iFrame_B, 310) $iSep_Pos = _GUIFrame_GetSepPos($iFrame_ GUICtrlSetData($hButton_2, $iSep_Pos) Sleep(1000) GUICtrlSetData($hButton_2, "Sep Pos") EndSwitch WEnd ; This is the already registered WM_SIZE handler Func _WM_SIZE($hWnd, $iMsg, $wParam, $lParam) ; Just call the GUIFrame resizing function here - do NOT use the _GUIFrame_ResizeReg function in the script _GUIFrame_SIZE_Handler($hWnd, $iMsg, $wParam, $lParam) Return "GUI_RUNDEFMSG" EndFunc ;==>_WM_SIZE An example to show how to set absolute/relative minimum frame sizes and the different behaviours available on GUI resizing: #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include "GUIFrame.au3" Global $iSep_Pos $hGUI = GUICreate("GUI_Frame Example 3", 500, 500, -1, -1, BitOR($WS_MINIMIZEBOX, $WS_MAXIMIZEBOX, $WS_SIZEBOX)) GUISetState() ; Create a 1st level frame $iFrame_A = _GUIFrame_Create($hGUI, 1) _GUIFrame_SetMin($iFrame_A, 50, 125, True) ; This line sets the minima as absolute values <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ;_GUIFrame_SetMin($iFrame_A, 50, 125) ; This line adjusts the minima to equivalent percentages on resizing <<<<<<<<<<<<<<<<<<<<< _GUIFrame_Switch($iFrame_A, 1) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_A, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0x00FF00) GUICtrlCreateLabel("", 0, 0, 50, 50) GUICtrlSetBkColor(-1, 0x0000FF) GUICtrlSetResizing(-1, $GUI_DOCKSIZE) GUICtrlSetState(-1, $GUI_DISABLE) _GUIFrame_Switch($iFrame_A, 2) $aWinSize = WinGetClientSize(_GUIFrame_GetHandle($iFrame_A, 2)) GUICtrlCreateLabel("", 5, 5, $aWinSize[0] - 10, $aWinSize[1] - 10) GUICtrlSetBkColor(-1, 0xFF0000) GUICtrlSetState(-1, $GUI_DISABLE) ; Set resizing flag for all created frames _GUIFrame_ResizeSet(0, 2) ; Adjust the second parameter to change the resizing behaviour <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ; Register the $WM_SIZE handler to permit resizing _GUIFrame_ResizeReg() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ; The UDF does all the tidying up as you exit Exit EndSwitch WEnd [New] An example to show the resizing callback in action: #include <GUIConstantsEx.au3> #include <WindowsConstants.au3> #include "GUIFrame.au3" $hGUI = GUICreate("GUI_Frame Example #", 500, 500, -1, -1, BitOR($WS_MINIMIZEBOX, $WS_MAXIMIZEBOX, $WS_SIZEBOX)) GUISetState() ; Create a 1st level frame $iFrame_A = _GUIFrame_Create($hGUI) _GUIFrame_SetMin($iFrame_A, 50, 100) ; Create a 2nd level frame $iFrame_B = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_A, 1), 1) GUISetBkColor(0xCCFFCC, _GUIFrame_GetHandle($iFrame_B, 1)) _GUIFrame_Switch($iFrame_B, 2) $cSetSize = GUICtrlCreateButton("Set Sep", 10, 10, 80, 30) ; Create another 2nd level frame $iFrame_C = _GUIFrame_Create(_GUIFrame_GetHandle($iFrame_A, 2), 1) GUISetBkColor(0xCCCCFF, _GUIFrame_GetHandle($iFrame_C, 2)) ; Set resizing flag for all created frames _GUIFrame_ResizeSet(0) ; Register the WM_SIZE handler _GUIFrame_ResizeReg() While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ; The UDF does all the tidying up as you exit Exit Case $cSetSize ; Set separator position _GUIFrame_SetSepPos($iFrame_B, 100) EndSwitch ; Get resize flags $aResize = _GUIFrame_ResizeState() ; If a frame has been resized then the [0] element = 1 If $aResize[0] Then _Check_Frames($aResize) WEnd Func _Check_Frames($aFlags) ; Check specific frame flags If $aFlags[$iFrame_B] And $aFlags[$iFrame_C] Then MsgBox(0, "Resize", "Green and blue areas have been resized") Elseif $aFlags[$iFrame_B] Then MsgBox(0, "Resize", "Green area has been resized") ElseIf $aFlags[$iFrame_C] Then MsgBox(0, "Resize", "Blue area has been resized") EndIf EndFunc [New] Here is the GUIFrame UDF itself: #include-once ; #INDEX# ============================================================================================================ ; Title .........: GUIFrame ; AutoIt Version : 3.3 + ; Language ......: English ; Description ...: Splits a GUI into slideable and resizable 2 part frames which can be further split if required ; Remarks .......: - The UDF uses OnAutoItExitRegister to call _GUIFrame_Exit to delete subclassed separator bars ; using the UDF created WndProc and to release the Callback on exit ; - The UDF can indicate when a specific fram has been resized ; - If the script already has a WM_SIZE message handler then do NOT use _GUIFrame_ResizeReg, ; but call the _GUIFrame_SIZE_Handler function from within the existing handler ; Author ........: Original UDF by Kip ; Modified ......; This version by Melba23 - using x64 compatible code drawn from Yashied's WinAPIEx library ; ==================================================================================================================== ; #AutoIt3Wrapper_Au3Check_Parameters=-d -w 1 -w 2 -w 3 -w- 4 -w 5 -w 6 -w- 7 ; #INCLUDES# ========================================================================================================= #include <WinAPI.au3> ; #GLOBAL VARIABLES# ================================================================================================= ; Array to hold handles for each frame set Global $aGF_HandleIndex[1][8] = [[0, 0, 0]] ; [0][0] = 0 ; Count of frames [0][1] = Move registered flag ; ; [n][0] = Parent GUI handle [n][4] = Original GUI handle ; [n][1] = First frame handle [n][5] = Indices of first frame internal frames ; [n][2] = Second frame handle [n][6] = Indices of second frame internal frames ; [n][3] = Separator bar handle [n][7] = Frame resize flag ; Array to hold sizing percentages for each frame set Global $aGF_SizingIndex[1][8] ; [n][0] = First frame min [n][2] = X coord [n][4] = Width [n][6] = Seperator percentage position ; [n][1] = Second frame min [n][3] = Y coord [n][5] = Height [n][7] = Resize type (0/1/2) ; Array to hold other settings for each frame set Global $aGF_SettingsIndex[1][3] ; [n][0] = Separator orientation (vert/horz = 0/1) ; [n][1] = Resizable frame flag (0/1) ; [n][2] = Separator size (default = 5) ; Array to hold WinProc handles for each separator Global $aGF_SepProcIndex[1][2] = [[0, 0]] ; Store registered Callback handle Global $hGF_RegCallBack = DllCallbackRegister("_GUIFrame_SepWndProc", "lresult", "hwnd;uint;wparam;lparam") $aGF_SepProcIndex[0][1] = DllCallbackGetPtr($hGF_RegCallBack) ; #ONAUTOITEXIT FUNCTIONS# =========================================================================================== OnAutoItExitRegister("_GUIFrame_Exit") ; #CURRENT# ========================================================================================================== ; _GUIFrame_Create: Splits a GUI into 2 frames ; _GUIFrame_SetMin: Sets minimum sizes for each frame ; _GUIFrame_ResizeSet: Sets resizing flag for all or specified frame sets ; _GUIFrame_GetHandle: Returns the handle of a frame element (required for further splitting) ; _GUIFrame_Switch: Sets a frame element as current GUI ; _GUIFrame_GetSepPos: Returns the current position of the separator ; _GUIFrame_SetSepPos: Moves the separator bar to adjust frame sizes ; _GUIFrame_ResizeState: Returns the resize state of the frames ; _GUIFrame_ResizeReg: Registers WM_SIZE message for resizing ; _GUIFrame_SIZE_Handler: WM_SIZE message handler to resize frames using _GUIFrame_Move ; ==================================================================================================================== ; #INTERNAL_USE_ONLY#================================================================================================= ; _GUIFrame_SepSubClass: Sets new WndProc for frame separator bar ; _GUIFrame_SepWndProc: New WndProc for frame separator bar ; _GUIFrame_SepPassMsg: Passes Msg to original frame WndProc for action ; _GUIFrame_Move: Moves and resizes frame elements and separator bars ; _GUIFrame_Exit: Deletes all subclassed separator bars to free UDF WndProc and frees registered callback handle ; ==================================================================================================================== ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_Create ; Description ...: Splits a GUI into 2 frames ; Syntax.........: _GUIFrame_Create($hWnd, $iSepOrient = 0, $iSepPos = 0, $iSepSize = 5, $iX = 0, $iY = 0, $iWidth = 0, $iHeight = 0, $iStyle = 0, $iExStyle = 0, $fShowWindow) ; Parameters ....: $hWnd - Handle of GUI to split ; $iSepOrient - Orientation of separator bar: 0 = Vertical (default), 1 = Horizontal ; $iSepPos - Required initial position of separator (default = centre of frame GUI) ; $iSepSize - Size of separator bar (default = 5, min = 3, max = 9) ; $iX - Left of frame area (default = 0) ; $iY - Top of frame area (default = 0) ; $iWidth - Width of frame area (default = full width) ; $iHeight - Height of frame area (default = full height) ; SiStyle - Required style value for frame elements ; SiExStyle - Required extended style value for frame elements ; $fShowWindow - True = Use API call to display frame if not displayed on start ; - False (default) - Do not use API call ; Requirement(s).: v3.3 + ; Return values .: Success: Returns index number of frame/separator set ; Failure: Returns 0 and sets @error as follows: ; 1 = Deprecated ; 2 = GUI creation failed ; 2 = Separator subclassing failed ; Author ........: Kip ; Modified ......: Melba23 ; Remarks .......: ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_Create($hWnd, $iSepOrient = 0, $iSepPos = 0, $iSepSize = 5, $iX = 0, $iY = 0, $iOrg_Width = 0, $iOrg_Height = 0, $iStyle = 0, $iExStyle = 0, $fShowWindow = False) Local $iSeperator_Pos, $hSeparator, $hFirstFrame, $hSecondFrame, $nSepPercent ; Set separator size Local $iSeparatorSize = 5 Switch $iSepSize Case 3 To 9 $iSeparatorSize = $iSepSize EndSwitch ; Set default sizing if no parameters set Local $iWidth = $iOrg_Width Local $iHeight = $iOrg_Height Local $aFullSize = WinGetClientSize($hWnd) If Not $iOrg_Width Then $iWidth = $aFullSize[0] If Not $iOrg_Height Then $iHeight = $aFullSize[1] ; Create parent GUI within client area Local $hParent = GUICreate("FrameParent", $iWidth, $iHeight, $iX, $iY, BitOR(0x40000000, $iStyle), $iExStyle, $hWnd) ; $WS_CHILD If $fShowWindow Then _WinAPI_ShowWindow($hParent, @SW_SHOW) ; Possible fix if frames do not display on start GUISetState(@SW_SHOW, $hParent) ; Confirm size of frame parent client area Local $aSize = WinGetClientSize($hParent) $iWidth = $aSize[0] $iHeight = $aSize[1] If $iSepOrient = 0 Then ; Set initial separator position $iSeperator_Pos = $iSepPos ; Adjust position if not within GUI or default set (=0) If $iSepPos > $iWidth Or $iSepPos < 1 Then $iSeperator_Pos = Round(($iWidth / 2) - ($iSeparatorSize / 2)) EndIf ; Create separator bar and force cursor change over separator $hSeparator = GUICreate("", $iSeparatorSize, $iHeight, $iSeperator_Pos, 0, 0x40000000, -1, $hParent) ;$WS_CHILD GUICtrlCreateLabel("", 0, 0, $iSeparatorSize, $iHeight, -1, 0x00000001) ; $WS_EX_DLGMODALFRAME GUICtrlSetCursor(-1, 13) GUISetState(@SW_SHOW, $hSeparator) ; Create the sizable frames $hFirstFrame = GUICreate("", $iSeperator_Pos, $iHeight, 0, 0, 0x40000000, -1, $hParent) ;$WS_CHILD GUISetState(@SW_SHOW, $hFirstFrame) $hSecondFrame = GUICreate("", $iWidth - ($iSeperator_Pos + $iSeparatorSize), $iHeight, $iSeperator_Pos + $iSeparatorSize, 0, 0x40000000, -1, $hParent) ;$WS_CHILD GUISetState(@SW_SHOW, $hSecondFrame) ; Set seperator position percentage $nSepPercent = $iSeperator_Pos / $iWidth Else $iSeperator_Pos = $iSepPos If $iSepPos > $iHeight Or $iSepPos < 1 Then $iSeperator_Pos = Round(($iHeight / 2) - ($iSeparatorSize / 2)) EndIf $hSeparator = GUICreate("", $iWidth, $iSeparatorSize, 0, $iSeperator_Pos, 0x40000000, -1, $hParent) ;$WS_CHILD GUICtrlCreateLabel("", 0, 0, $iWidth, $iSeparatorSize, -1, 0x01) ; $WS_EX_DLGMODALFRAME GUICtrlSetCursor(-1, 11) GUISetState(@SW_SHOW, $hSeparator) $hFirstFrame = GUICreate("", $iWidth, $iSeperator_Pos, 0, 0, 0x40000000, -1, $hParent) ;$WS_CHILD GUISetState(@SW_SHOW, $hFirstFrame) $hSecondFrame = GUICreate("", $iWidth, $iHeight - ($iSeperator_Pos + $iSeparatorSize), 0, $iSeperator_Pos + $iSeparatorSize, 0x40000000, -1, $hParent) ;$WS_CHILD GUISetState(@SW_SHOW, $hSecondFrame) $nSepPercent = $iSeperator_Pos / $iHeight EndIf ; Check for error creating GUIs If $hParent = 0 Or $hSeparator = 0 Or $hFirstFrame = 0 Or $hSecondFrame = 0 Then ; Delete all GUIs and return error GUIDelete($hParent) GUIDelete($hSeparator) GUIDelete($hFirstFrame) GUIDelete($hSecondFrame) Return SetError(2, 0, 0) EndIf ; Subclass the separator If _GUIFrame_SepSubClass($hSeparator) = 0 Then ; If Subclassing failed then delete all GUIs and return error GUIDelete($hParent) GUIDelete($hSeparator) GUIDelete($hFirstFrame) GUIDelete($hSecondFrame) Return SetError(3, 0, 0) EndIf ; Create new lines in the storage arrays for this frame set Local $iIndex = $aGF_HandleIndex[0][0] + 1 ReDim $aGF_HandleIndex[$iIndex + 1][8] ReDim $aGF_SizingIndex[$iIndex + 1][8] ReDim $aGF_SettingsIndex[$iIndex + 1][3] ; Store this frame set handles/variables/defaults in the new lines $aGF_HandleIndex[0][0] = $iIndex $aGF_HandleIndex[$iIndex][0] = $hParent $aGF_HandleIndex[$iIndex][1] = $hFirstFrame $aGF_HandleIndex[$iIndex][2] = $hSecondFrame $aGF_HandleIndex[$iIndex][3] = $hSeparator $aGF_HandleIndex[$iIndex][4] = $hWnd $aGF_HandleIndex[$iIndex][5] = 0 $aGF_HandleIndex[$iIndex][6] = 0 $aGF_SizingIndex[$iIndex][0] = 0 $aGF_SizingIndex[$iIndex][1] = 0 $aGF_SizingIndex[$iIndex][6] = $nSepPercent $aGF_SettingsIndex[$iIndex][0] = $iSepOrient $aGF_SettingsIndex[$iIndex][1] = 0 $aGF_SettingsIndex[$iIndex][2] = $iSeparatorSize ; Store this frame index in parent line if parent is an existing frame For $i = 1 To $aGF_HandleIndex[0][0] - 1 If $aGF_HandleIndex[$i][1] = $hWnd Then If $aGF_HandleIndex[$i][5] = 0 Then $aGF_HandleIndex[$i][5] = $iIndex Else $aGF_HandleIndex[$i][5] &= "|" & $iIndex EndIf ExitLoop EndIf If $aGF_HandleIndex[$i][2] = $hWnd Then If $aGF_HandleIndex[$i][6] = 0 Then $aGF_HandleIndex[$i][6] = $iIndex Else $aGF_HandleIndex[$i][6] &= "|" & $iIndex EndIf ExitLoop EndIf Next ; Store coordinate and size fractions If $iX Then $aGF_SizingIndex[$iIndex][2] = $iX / $aFullSize[0] Else $aGF_SizingIndex[$iIndex][2] = 0 EndIf If $iY Then $aGF_SizingIndex[$iIndex][3] = $iY / $aFullSize[1] Else $aGF_SizingIndex[$iIndex][3] = 0 EndIf If $iOrg_Width Then $aGF_SizingIndex[$iIndex][4] = $iOrg_Width / $aFullSize[0] Else $aGF_SizingIndex[$iIndex][4] = 1 EndIf If $iOrg_Height Then $aGF_SizingIndex[$iIndex][5] = $iOrg_Height / $aFullSize[1] Else $aGF_SizingIndex[$iIndex][5] = 1 EndIf ; Switch back to main GUI GUISwitch($hWnd) ; Return the index for this frame Return $iIndex EndFunc ;==>_GUIFrame_Create ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_SetMin ; Description ...: Sets minimum sizes for frames ; Syntax.........: _GUIFrame_SetMin($iFrame, $iFirstMin = 0, $iSecondMin = 0, $fAbsolute = False) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; $iFirstMin - Min size of first (left/top) frame - max half size ; $iSecondMin - Min Size of second (right/bottom) frame - max half size ; $fAbsolute - True = Minima fixed when GUI resized ; - False = Minima adjusted on resize to equivalent percentage of new GUI size (default) ; Requirement(s).: v3.3 + ; Return values .: None ; Author ........: Melba23 based on some original code by Kip ; Modified ......: ; Remarks .......: If the frame is resized, these minima are adjusted accordingly unless $fAbsolute is set ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_SetMin($iFrame, $iFirstMin = 0, $iSecondMin = 0, $fAbsolute = False) ; Check for valid frame index If $iFrame < 1 Or $iFrame > $aGF_HandleIndex[0][0] Then Return 0 ; Get size of parent Local $aSize = WinGetClientSize($aGF_HandleIndex[$iFrame][0]) ; Now check orientation and determine Local $iMax, $iFullSize If $aGF_SettingsIndex[$iFrame][0] = 0 Then $iMax = Floor(($aSize[0] / 2) - $aGF_SettingsIndex[$iFrame][2]) $iFullSize = $aSize[0] Else $iMax = Floor(($aSize[1] / 2) - $aGF_SettingsIndex[$iFrame][2]) $iFullSize = $aSize[1] EndIf ; Set minimums If $fAbsolute Then $aGF_SizingIndex[$iFrame][0] = Int($iFirstMin) $aGF_SizingIndex[$iFrame][1] = Int($iSecondMin) Else If $iFirstMin > $iMax Then $aGF_SizingIndex[$iFrame][0] = $iMax / $iFullSize Else $aGF_SizingIndex[$iFrame][0] = $iFirstMin / $iFullSize EndIf If $iSecondMin > $iMax Then $aGF_SizingIndex[$iFrame][1] = $iMax / $iFullSize Else $aGF_SizingIndex[$iFrame][1] = $iSecondMin / $iFullSize EndIf EndIf EndFunc ;==>_GUIFrame_SetMin ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_ResizeSet ; Description ...: Sets resizing flag for frames ; Syntax.........: _GUIFrame_ResizeSet($iFrame = 0[, $iType = 0]) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create (Default - 0 = all existing frames) ; $iType - Separator behaviour on GUI resize ; 0 = Frames retain percentage size (default) ; 1 = Top/left frame fixed size ; 2 = Bottom/right frame fixed size ; Requirement(s).: v3.3 + ; Return values .: Success: 2 - All existing frame flags set ; 1 - Specified flag set ; Failure: 0 with @error set to: ; 1 - Invalid frame specified ; 2 - Invalid type parameter ; Author ........: Melba23 ; Modified ......: ; Remarks .......: ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_ResizeSet($iFrame = 0, $iType = 0) Switch $iType Case 0, 1, 2 ; Valid Case Else Return SetError(2, 0, 0) EndSwitch Switch $iFrame Case 0 ; Set all frames For $i = 1 To $aGF_HandleIndex[0][0] $aGF_SettingsIndex[$i][1] = 1 $aGF_SizingIndex[$i][7] = $iType Next Return 2 Case 1 To $aGF_HandleIndex[0][0] ; Only valid frames accepted $aGF_SettingsIndex[$iFrame][1] = 1 $aGF_SizingIndex[$iFrame][7] = $iType Return 1 Case Else ; Error Return SetError(1, 0, 0) EndSwitch EndFunc ;==>_GUIFrame_ResizeSet ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_GetHandle ; Description ...: Returns the handle of a frame element (required for further splitting) ; Syntax.........: _GUIFrame_GetHandle($iFrame, $iElement) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; $iElement - 1 = first (left/top) frame, 2 = second (right/bottom) frame ; Requirement(s).: v3.3 + ; Return values .: Success: Handle of frame ; Failure: 0 with @error set as follows ; 1 - Invalid frame specified ; 2 - Invalid element specified ; Author ........: Kip ; Modified ......: Melba23 ; Remarks .......: _GUIFrame_Create requires a GUI handle as a parameter ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_GetHandle($iFrame, $iElement) ; Check valid frame index and element Switch $iFrame Case 1 To $aGF_HandleIndex[0][0] Switch $iElement Case 1, 2 ; Return handle Return $aGF_HandleIndex[$iFrame][$iElement] EndSwitch Return SetError(2, 0, 0) EndSwitch Return SetError(1, 0, 0) EndFunc ;==>_GUIFrame_GetHandle ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_Switch ; Description ...: Sets a frame element as current GUI ; Syntax.........: _GUIFrame_Switch($iFrame, $iElement) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; $iElement - 1 = first (left/top) frame, 2 = second (right/bottom) frame ; Requirement(s).: v3.3 + ; Return values .: None ; Author ........: Kip ; Modified ......: Melba23 ; Remarks .......: Subsequent controls are created in the specified frame element ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_Switch($iFrame, $iElement) ; Check valid frame index and element Switch $iFrame Case 1 To $aGF_HandleIndex[0][0] Switch $iElement Case 1, 2 ; Switch to specified element Return GUISwitch($aGF_HandleIndex[$iFrame][$iElement]) EndSwitch Return SetError(2, 0, 0) EndSwitch Return SetError(1, 0, 0) EndFunc ;==>_GUIFrame_Switch ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_GetSepPos() ; Description ...: Returns the current position of the separator ; Syntax.........: _GUIFrame_GetSepPos($iFrame) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; Requirement(s).: v3.3 + ; Return values .: Success: Position of separator ; Failure: -1 = Invalid frame specified ; Author ........: Melba23 ; Remarks .......: This value can be stored and used as the initial separator position parameter in _GUIFrame_Create ; to restore exit position on restart ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_GetSepPos($iFrame) Local $iSepPos ; Check for valid frame index If $iFrame < 1 Or $iFrame > $aGF_HandleIndex[0][0] Then Return -1 ; Get position of first frame Local $aFrame_Pos = WinGetPos($aGF_HandleIndex[$iFrame][1]) ; Get position of separator Local $aSep_Pos = WinGetPos($aGF_HandleIndex[$iFrame][3]) ; Check on separator orientation If $aGF_SettingsIndex[$iFrame][0] Then $iSepPos = $aSep_Pos[1] - $aFrame_Pos[1] Else $iSepPos = $aSep_Pos[0] - $aFrame_Pos[0] EndIf Return $iSepPos EndFunc ;==>_GUIFrame_GetSepPos ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_SetSepPos() ; Description ...: Moves the separator bar to adjust frame sizes ; Syntax.........: _GUIFrame_SetSepPos($iFrame, $iSepPos) ; Parameters ....: $iFrame - Index of frame set as returned by _GUIFrame_Create ; $iSepos - Position of separator bar within frame ; Requirement(s).: v3.3 + ; Return values .: Success: 1 ; Failure: 0 with @error set as follows ; 1 - Invalid frame specified ; 2 - Invalid separator position (outside frame) ; 3 - Invalid separator position (below frame minimum size) ; Author ........: Melba23 ; Remarks .......: This value can be stored and used as the initial separator position parameter in _GUIFrame_Create ; to restore exit position on restart ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_SetSepPos($iFrame, $iSepPos) Local $iFirstMin, $iSecondMin ; Check for valid frame index If $iFrame < 1 Or $iFrame > $aGF_HandleIndex[0][0] Then Return SetError(1, 0, 0) ; Check separator actually needs to move If $iSepPos = _GUIFrame_GetSepPos($iFrame) Then Return 1 ; Get frame GUI size Local $aWinPos = WinGetPos($aGF_HandleIndex[$iFrame][0]) ; Depending on separator orientation If $aGF_SettingsIndex[$iFrame][0] Then ; Check sep position is valid If $iSepPos < 0 Or $iSepPos > $aWinPos[3] Then Return SetError(2, 0, 0) ; Determine minima for frames $iFirstMin = $aWinPos[3] * $aGF_SizingIndex[$iFrame][0] $iSecondMin = ($aWinPos[3] * (1 - $aGF_SizingIndex[$iFrame][1])) - $aGF_SettingsIndex[$iFrame][2] ; Check required value is valid If $iSepPos < $iFirstMin Or $iSepPos > $iSecondMin Then Return SetError(3, 0, 0) ; Move frames and seperator WinMove($aGF_HandleIndex[$iFrame][1], "", 0, 0, $aWinPos[2], $iSepPos) WinMove($aGF_HandleIndex[$iFrame][2], "", 0, $iSepPos + $aGF_SettingsIndex[$iFrame][2], $aWinPos[2], $aWinPos[3] - ($iSepPos + $aGF_SettingsIndex[$iFrame][2])) WinMove($aGF_HandleIndex[$iFrame][3], "", 0, $iSepPos, $aWinPos[2], $aGF_SettingsIndex[$iFrame][2]) ; Store new separator position $aGF_SizingIndex[$iFrame][6] = $iSepPos / $aWinPos[3] Else If $iSepPos < 0 Or $iSepPos > $aWinPos[2] Then Return SetError(2, 0, 0) $iFirstMin = $aWinPos[2] * $aGF_SizingIndex[$iFrame][0] $iSecondMin = ($aWinPos[2] * (1 - $aGF_SizingIndex[$iFrame][1])) - $aGF_SettingsIndex[$iFrame][2] If $iSepPos < $iFirstMin Or $iSepPos > $iSecondMin Then Return SetError(3, 0, 0) WinMove($aGF_HandleIndex[$iFrame][1], "", 0, 0, $iSepPos, $aWinPos[3]) WinMove($aGF_HandleIndex[$iFrame][2], "", $iSepPos + $aGF_SettingsIndex[$iFrame][2], 0, $aWinPos[2] - ($iSepPos + $aGF_SettingsIndex[$iFrame][2]), $aWinPos[3]) WinMove($aGF_HandleIndex[$iFrame][3], "", $iSepPos, 0, $aGF_SettingsIndex[$iFrame][2], $aWinPos[3]) $aGF_SizingIndex[$iFrame][6] = $iSepPos / $aWinPos[2] EndIf ; Set callback $aGF_HandleIndex[$iFrame][7] = 1 Return 1 EndFunc ;==>_GUIFrame_SetSepPos ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_ResizeState ; Description ...: Returns the resize state of the frames ; Syntax.........: _GUIFrame_ResizeState() ; Parameters ....: None ; Requirement(s).: v3.3 + ; Return values .: Success: Array of frame resize flags ; Author ........: Melba23 ; Remarks .......: An array is always returned - the user must query the flag for the relevant frame to detect resizing ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_ResizeState() ; Create array to hold resize flags Local $aRet[$aGF_HandleIndex[0][0] + 1] = [0] For $i = 1 To $aGF_HandleIndex[0][0] ; Read state $aRet[$i] = $aGF_HandleIndex[$i][7] ; Set flag is resized If $aGF_HandleIndex[$i][7] Then $aRet[0] = 1 ; Clear resized flag $aGF_HandleIndex[$i][7] = 0 Next ; Return array of flags Return $aRet EndFunc ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_ResizeReg ; Description ...: Registers WM_SIZE message for resizing ; Syntax.........: _GUIFrame_ResizeReg() ; Parameters ....: None ; Requirement(s).: v3.3 + ; Return values .: Success: 1 - Message handler registered ; Failure: 0 with @error set to 1 - Message handler already registered ; Author ........: Melba23 ; Modified ......: ; Remarks .......: ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_ResizeReg() ; Register the WM_SIZE message If $aGF_HandleIndex[0][1] = 0 Then Local $iRet = GUIRegisterMsg(0x05, "_GUIFrame_SIZE_Handler") ; $WM_SIZE If $iRet Then $aGF_HandleIndex[0][1] = 1 Return 1 EndIf EndIf Return SetError(1, 0, 0) EndFunc ;==>_GUIFrame_ResizeReg ; #FUNCTION# ========================================================================================================= ; Name...........: _GUIFrame_SIZE_Handler ; Description ...: Used to resize frames when resizing of holding GUI occurs ; Syntax.........: _GUIFrame_SIZE_Handler($hWnd, $iMsg, $wParam, $lParam) ; Parameters ....: None ; Requirement(s).: v3.3 + ; Return values .: None ; Author ........: Melba23 ; Modified ......: ; Remarks .......: If the script already has a WM_SIZE handler, then just call this function from within it ; and do NOT use the _GUIFrame_ResizeReg function ; Example........: Yes ;===================================================================================================================== Func _GUIFrame_SIZE_Handler($hWnd, $iMsg, $wParam, $lParam) #forceref $iMsg, $wParam, $lParam Local $iIndex ; Get index of base frame GUI For $iIndex = 1 To $aGF_HandleIndex[0][0] If $aGF_HandleIndex[$iIndex][4] = $hWnd Then ExitLoop Next ; If handle not found If $iIndex > $aGF_HandleIndex[0][0] Then Return "GUI_RUNDEFMSG" ; Check if we should resize this set If $aGF_SettingsIndex[$iIndex][1] = 1 Then ; Get new base GUI size Local $aSize = WinGetClientSize($hWnd) ; Resize frames _GUIFrame_Move($iIndex, $aSize[0] * $aGF_SizingIndex[$iIndex][2], $aSize[1] * $aGF_SizingIndex[$iIndex][3], $aSize[0] * $aGF_SizingIndex[$iIndex][4], $aSize[1] * $aGF_SizingIndex[$iIndex][5]) ; Adjust any resizeable internal frames - array elements are adjacent for ease of coding For $i = 0 To 1 ; Adjust internal frames of first/second frame if any exist If $aGF_HandleIndex[$iIndex][5 + $i] <> 0 Then ; StringSplit the element content on "|" Local $aInternal = StringSplit($aGF_HandleIndex[$iIndex][5 + $i], "|") ; Then loop though the Number(values) found For $j = 1 To $aInternal[0] Local $iIntIndex = Number($aInternal[$j]) ; Check if internal frame is resizable If $aGF_SettingsIndex[$iIntIndex][1] = 1 Then ; And change if so _GUIFrame_SIZE_Handler($aGF_HandleIndex[$iIntIndex][4], $iMsg, $wParam, $lParam) EndIf Next EndIf Next ; Set callback $aGF_HandleIndex[$iIndex][7] = 1 EndIf Return "GUI_RUNDEFMSG" EndFunc ;==>_GUIFrame_SIZE_Handler ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_SepSubClass ; Description ...: Sets new WndProc for frame separator bar ; Author ........: Kip ; Modified.......: Melba23, using SetWindowLongPtr x64 compatible code drawn from Yashied's WinAPIEx library ; Remarks .......: This function is used internally by _GUIFrame_Create ; =============================================================================================================================== Func _GUIFrame_SepSubClass($hWnd) Local $aRet ; Check separator has not already been used For $i = 1 To $aGF_SepProcIndex[0][0] If $aGF_SepProcIndex[$i][0] = $hWnd Then Return 0 Next ; Store current WinProc handle in new array line Local $iIndex = $aGF_SepProcIndex[0][0] + 1 ReDim $aGF_SepProcIndex[$iIndex + 1][2] $aGF_SepProcIndex[0][0] = $iIndex $aGF_SepProcIndex[$iIndex][0] = $hWnd ; Subclass separator bar If @AutoItX64 Then $aRet = DllCall('user32.dll', 'long_ptr', 'SetWindowLongPtrW', 'hwnd', $hWnd, 'int', -4, 'long_ptr', $aGF_SepProcIndex[0][1]) ; $GWL_WNDPROC Else $aRet = DllCall('user32.dll', 'long', 'SetWindowLongW', 'hwnd', $hWnd, 'int', -4, 'long', $aGF_SepProcIndex[0][1]) ; $GWL_WNDPROC EndIf ; Check for subclassing error If @error Or $aRet[0] = 0 Then Return 0 ; Return success $aGF_SepProcIndex[$iIndex][1] = $aRet[0] Return 1 EndFunc ;==>_GUIFrame_SepSubClass ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_SepWndProc ; Description ...: New WndProc for frame separator bar ; Author ........: Kip ; Modified.......: Melba23 ; Remarks .......: This function is used internally by _GUIFrame_SepSubClass ; =============================================================================================================================== Func _GUIFrame_SepWndProc($hWnd, $iMsg, $wParam, $lParam) Local $iSubtract, $fAbsolute = False If $iMsg = 0x0111 Then ; WM_COMMAND ; Check if hWnd is a Separator bar For $iIndex = 1 To $aGF_HandleIndex[0][0] If $aGF_HandleIndex[$iIndex][3] = $hWnd Then ExitLoop Next ; If not then pass message on to org WndProc If $iIndex > $aGF_HandleIndex[0][0] Then Return _GUIFrame_SepPassMsg($hWnd, $iMsg, $wParam, $lParam) ; Extract values from array Local $hParent = $aGF_HandleIndex[$iIndex][0] Local $hFirstFrame = $aGF_HandleIndex[$iIndex][1] Local $hSecondFrame = $aGF_HandleIndex[$iIndex][2] Local $hSeparator = $aGF_HandleIndex[$iIndex][3] Local $iFirstMin = $aGF_SizingIndex[$iIndex][0] Local $iSecondMin = $aGF_SizingIndex[$iIndex][1] If $iFirstMin > 1 Or $iSecondMin > 1 Then $fAbsolute = True EndIf Local $iSeparatorSize = $aGF_SettingsIndex[$iIndex][2] ; Get client size of the parent Local $aClientSize = WinGetClientSize($hParent) Local $iWidth = $aClientSize[0] Local $iHeight = $aClientSize[1] ; Get cursor info for the Separator Local $aCInfo = GUIGetCursorInfo($hSeparator) ; Depending on separator orientation If $aGF_SettingsIndex[$iIndex][0] = 0 Then ; Get Separator X-coord $iSubtract = $aCInfo[0] Do ; Get parent X-coord $aCInfo = GUIGetCursorInfo($hParent) Local $iCursorX = $aCInfo[0] ; Determine width of first frame Local $iFirstWidth = $iCursorX - $iSubtract ; And ensure it is at least minimum If $fAbsolute Then If $iFirstWidth < $iFirstMin Then $iFirstWidth = $iFirstMin If $iWidth - $iFirstWidth - $iSeparatorSize < $iSecondMin Then $iFirstWidth = $iWidth - $iSeparatorSize - $iSecondMin Else If $iFirstWidth < $iWidth * $iFirstMin Then $iFirstWidth = $iWidth * $iFirstMin If $iWidth - ($iFirstWidth + $iSeparatorSize) < $iWidth * $iSecondMin Then $iFirstWidth = $iWidth - ($iWidth * $iSecondMin) - $iSeparatorSize EndIf ; Move the GUIs to the correct places WinMove($hFirstFrame, "", 0, 0, $iFirstWidth, $iHeight) WinMove($hSecondFrame, "", $iFirstWidth + $iSeparatorSize, 0, $iWidth - ($iFirstWidth + $iSeparatorSize), $iHeight) WinMove($hSeparator, "", $iFirstWidth, 0, $iSeparatorSize, $iHeight) ; Do until the mouse button is released Until Not _WinAPI_GetAsyncKeyState(0x01) ; Store current separator percentage position $aGF_SizingIndex[$iIndex][6] = $iFirstWidth / $iWidth ElseIf $aGF_SettingsIndex[$iIndex][0] = 1 Then $iSubtract = $aCInfo[1] Do $aCInfo = GUIGetCursorInfo($hParent) Local $iCursorY = $aCInfo[1] Local $iFirstHeight = $iCursorY - $iSubtract If $fAbsolute Then If $iFirstHeight < $iFirstMin Then $iFirstHeight = $iFirstMin If $iHeight - $iFirstHeight - $iSeparatorSize < $iSecondMin Then $iFirstHeight = $iHeight - $iSeparatorSize - $iSecondMin Else If $iFirstHeight < $iHeight * $iFirstMin Then $iFirstHeight = $iHeight * $iFirstMin If $iHeight - ($iFirstHeight + $iSeparatorSize) < $iHeight * $iSecondMin Then $iFirstHeight = $iHeight - ($iHeight * $iSecondMin) - $iSeparatorSize EndIf WinMove($hFirstFrame, "", 0, 0, $iWidth, $iFirstHeight) WinMove($hSecondFrame, "", 0, $iFirstHeight + $iSeparatorSize, $iWidth, $iHeight - ($iFirstHeight + $iSeparatorSize)) WinMove($hSeparator, "", 0, $iFirstHeight, $iWidth, $iSeparatorSize) Until Not _WinAPI_GetAsyncKeyState(0x01) $aGF_SizingIndex[$iIndex][6] = $iFirstHeight / $iHeight EndIf ; Set callback $aGF_HandleIndex[$iIndex][7] = 1 EndIf ; Pass the message on to org WndProc Return _GUIFrame_SepPassMsg($hWnd, $iMsg, $wParam, $lParam) EndFunc ;==>_GUIFrame_SepWndProc ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_SepPassMsg ; Description ...: Passes Msg to frame parent WndProc for action ; Author ........: Kip ; Modified.......: Melba23 ; Remarks .......: This function is used internally by _GUIFrame_SepWndProc ; =============================================================================================================================== Func _GUIFrame_SepPassMsg($hWnd, $iMsg, $wParam, $lParam) For $i = 1 To $aGF_SepProcIndex[0][0] If $aGF_SepProcIndex[$i][0] = $hWnd Then Return _WinAPI_CallWindowProc($aGF_SepProcIndex[$i][1], $hWnd, $iMsg, $wParam, $lParam) Next EndFunc ;==>_GUIFrame_SepPassMsg ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_Move ; Description ...: Moves and resizes frame elements and separator bars ; Author ........: Kip ; Modified.......: Melba23 ; Remarks .......: This function is used internally by _GUIFrame_SIZE_Handler ; =============================================================================================================================== Func _GUIFrame_Move($iFrame, $iX, $iY, $iWidth = 0, $iHeight = 0) If $iFrame < 1 Or $iFrame > $aGF_HandleIndex[0][0] Then Return 0 Local $fAbsolute = False, $iDimension, $iActual_Size_1, $iActual_Size_2, $iSize Local $iOrientation = $aGF_SettingsIndex[$iFrame][0] Local $iSeparatorSize = $aGF_SettingsIndex[$iFrame][2] ; Set size if not specified If Not $iWidth Then $iWidth = _WinAPI_GetWindowWidth($aGF_HandleIndex[$iFrame][0]) If Not $iHeight Then $iHeight = _WinAPI_GetWindowHeight($aGF_HandleIndex[$iFrame][0]) ; Move parent WinMove($aGF_HandleIndex[$iFrame][0], "", $iX, $iY, $iWidth, $iHeight) ; Depending on separator orientation get required width/height values If $iOrientation = 1 Then $iDimension = $iHeight $iActual_Size_1 = _WinAPI_GetWindowHeight($aGF_HandleIndex[$iFrame][1]) $iActual_Size_2 = _WinAPI_GetWindowHeight($aGF_HandleIndex[$iFrame][2]) Else $iDimension = $iWidth $iActual_Size_1 = _WinAPI_GetWindowWidth($aGF_HandleIndex[$iFrame][1]) $iActual_Size_2 = _WinAPI_GetWindowWidth($aGF_HandleIndex[$iFrame][2]) EndIf ; Check resize type required Switch $aGF_SizingIndex[$iFrame][7] Case 0 ; Determine new size for first frame using separator position percentage $iSize = Int($iDimension * $aGF_SizingIndex[$iFrame][6]) Case 1 ; Get current fixed first frame size $iSize = $iActual_Size_1 Case 2 ; Determine new first frame size with fixed second frame size $iSize = $iDimension - $iSeparatorSize - $iActual_Size_2 EndSwitch ; Set frame min percentages Local $iFirstMin = $aGF_SizingIndex[$iFrame][0] Local $iSecondMin = $aGF_SizingIndex[$iFrame][1] If $iFirstMin > 1 Or $iSecondMin > 1 Then $fAbsolute = True EndIf ; Check for minimum size of first frame Local $iAdjust_Other = True Local $fSep_Adjusted = False ; Adjust first frame size If $fAbsolute Then If $iSize < $iFirstMin Then $iSize = $iFirstMin $iAdjust_Other = False $fSep_Adjusted = True EndIf Else If $iSize < $iDimension * $iFirstMin Then $iSize = $iDimension * $iFirstMin $iAdjust_Other = False $fSep_Adjusted = True EndIf EndIf ; Now adjust second frame if first not adjusted If $iAdjust_Other Then ; Find max available size for this frame Local $iSecondMax = $iDimension - $iFirstMin - $iSeparatorSize If $iSecondMax < $iSecondMin Then $iSecondMin = $iSecondMax EndIf ; Adjust second frame size If $fAbsolute Then If $iActual_Size_2 < $iSecondMin Then $iSize = $iDimension - $iSecondMin - $iSeparatorSize $fSep_Adjusted = True EndIf Else If $iActual_Size_2 < $iDimension * $iSecondMin Then $iSize = $iDimension - ($iDimension * $iSecondMin) - $iSeparatorSize $fSep_Adjusted = True EndIf EndIf EndIf ; If the separator has been moved programatically then reset percentage size of first frame If $fSep_Adjusted Then $aGF_SizingIndex[$iFrame][6] = $iSize / $iDimension EndIf ; Move and resize GUIs according to orientation If $iOrientation = 1 Then WinMove($aGF_HandleIndex[$iFrame][1], "", 0, 0, $iWidth, $iSize) WinMove($aGF_HandleIndex[$iFrame][2], "", 0, $iSize + $iSeparatorSize, $iWidth, $iHeight - $iSize - $iSeparatorSize) WinMove($aGF_HandleIndex[$iFrame][3], "", 0, $iSize, $iWidth, $iSeparatorSize) Else WinMove($aGF_HandleIndex[$iFrame][1], "", 0, 0, $iSize, $iHeight) WinMove($aGF_HandleIndex[$iFrame][2], "", $iSize + $iSeparatorSize, 0, $iWidth - $iSize - $iSeparatorSize, $iHeight) WinMove($aGF_HandleIndex[$iFrame][3], "", $iSize, 0, $iSeparatorSize, $iHeight) EndIf EndFunc ;==>_GUIFrame_Move ; #INTERNAL_USE_ONLY#============================================================================================================ ; Name...........: _GUIFrame_Exit() ; Description ...: Deletes all subclassed separator bars to free UDF WndProc and frees registered callback handle ; Author ........: Melba23 ; Remarks .......: Called by OnAutoItExitRegister to delete all subclassed separator bars and to free the UDF created WndProc. ; Example........: Yes ;================================================================================================================================ Func _GUIFrame_Exit() ; Delete all subclassed separator bars For $i = $aGF_HandleIndex[0][0] To 1 Step -1 GUIDelete($aGF_HandleIndex[$i][3]) Next ; Free registered Callback handle DllCallbackFree($hGF_RegCallBack) EndFunc ;==>_GUIFrame_Exit [New] And finally all 5 files in zip format: GUIFrame.zip I hope you find this UDF useful. As always brickbats and bouquets welcomed. M23

This is my modification of the editor based on SciTE 3.2.5.99. Too many changes are made. Added new plugins (.lua) and rewrited existing, added Toolbar and Sidebar, expanded main and context menu, and more... I will not list all the changes, just download and try it. I also want to say a big thank the staff of Ru-Board for the excellent work on the modification of the editor and writing great plugins (.lua). Compiler Wrapper (CW) - a new tool that is part of SciTE 3.2.5.99 and designed to replace the AutoItWrapper. CW only works with "pragma" directives and does not use "AutoIt3Wrapper" directives. CW differs from AutoItWrapper both externally and internally but has a similar logic. Here are some possibilities utility - more friendly GUI, all options of "pragma" directives are located in one window, the ability to add digital signature, and a simple way to add resources (.rcs and .res files). The current version of CW is compatible with AutoIt 3.3.10.x, 3.3.12.x, and 3.3.14.x. How to install? Unpack CW to Compiler Wrapper folder and copy it to your SciTE or SciTE\Tools directory. Note that if you download SciTE 3.2.5.99 then you need not do anything because CW is already installed in the package. Command lines for SciTE: #Command line for compilation command.compile.au3="$(SciteDefaultHome)\Compiler Wrapper\CW.exe" "$(FilePath)" /m:1 /c:0 command.compile.subsystem.au3=1 #Command line for building (without GUI) command.build.au3="$(SciteDefaultHome)\Compiler Wrapper\CW.exe" "$(FilePath)" /m:1 /c:0 /s:1 command.build.subsystem.$(au3)=1 #Command line for changing "pragma" options only command.90.au3="$(SciteDefaultHome)\Compiler Wrapper\CW.exe" "$(FilePath)" /m:2 command.name.90.au3=Compiler Options... command.shortcut.90.au3=Shift+F7 command.subsystem.90.au3=1 command.save.before.90.au3=1 Command lines for Windows Explorer context menu: ;Command line for compilation "C:\Program Files (x86)\SciTE\Tools\Compiler Wrapper\CW.exe" "%1" /m:0 /c:0 ;Command line for building (without GUI) "C:\Program Files (x86)\SciTE\Tools\Compiler Wrapper\CW.exe" "%1" /m:0 /c:0 /s:1 Screenshots Files to download You can download latest SciTE build on this page (bottom of the post) or by using the SciTE Updater.

Or another way is create a logging API that opens the file once and closes at the end e.g. #include <File.au3> Global $g_hLogFile = -1 ; Close on AutoIt shutdown OnAutoItExitRegister(Log_Shutdown) Example() Func Example() ; Start logging Log_Startup() ; Write to the log file For $i = 0 To 1000 Log_Write($i) Next ; Stop logging. NOTE: Done automatically due to registering the function at the start for when AutoIt exists ; Log_Shutdown() EndFunc ;==>Example ; Tidy up our resources. Returns True or False Func Log_Shutdown() If $g_hLogFile <> -1 Then Return FileClose($g_hLogFile) > 0 EndIf Return False EndFunc ;==>Log_Shutdown ; Start the logging API. Returns True or False Func Log_Startup() $g_hLogFile = FileOpen(@ScriptDir & "\Log\Error.log", BitOR($FO_APPEND, $FO_CREATEPATH)) Return $g_hLogFile <> -1 EndFunc ;==>Log_Startup ; Write a log message. Returns True or False Func Log_Write($sLogEntry) If $g_hLogFile == -1 Then Return False Local $iReturn = _FileWriteLog($g_hLogFile, $sLogEntry) Return SetError(@error, @extended, $iReturn > 0) EndFunc ;==>Log_Write

KutayAltinoklu, is not really describing the problem, just that there is a problem. When I ran this I get "Unable to open file = c:\..." That can be easily fixed using the following code... #include <File.au3> Local $ErrorFile = FileOpen(@ScriptDir & "\Log\Error.log", $FO_APPEND + $FO_CREATEPATH) Func logTest() _FileWriteLog($ErrorFile, "Test") EndFunc Call ("logTest") shellexecute(@ScriptDir & "\Log\Error.log")Note the addition of a parm to the FileOpen function. While that works, it is not terribly useful to hardcode a value to write in a function. Lets change it slightly... 1 - add a parm that contains the string to write to the log function 2 - open/close the error file with each call to the function 3 - invoke function directly, not with Call stmt #include <File.au3> Func logTest($sLogEntry) Local $ErrorFile = FileOpen(@ScriptDir & "\Log\Error.log", $FO_APPEND + $FO_CREATEPATH) _FileWriteLog($ErrorFile, $sLogEntry) fileclose($ErrorFile) EndFunc logtest('My latest entry') logtest('and another...') shellexecute(@ScriptDir & "\Log\Error.log")If any of this does not make sense read about functions in general and the function that you are using in the Help file. kylomas edit: @‌Guinness - While I was trying to get the screen print to work I see you beat me to it...

Don't use call like that, instead use logTest()Don't forget to tidy up your resources using FileClose()Learn how to error check. Did you place a console write underneath _FileWriteLog() with @error?Anyway it's pretty simply with a bit of thought process. Use $FO_APPEND + $FO_CREATEPATH in FileOpen(), as your path probably doesn't exist. How do I know? Well FileOpen was returning -1.

You had many issues in your script I fixed and modified and mainly as you are mixing strings and binary you have to deal properly with those you cannot use filewriteline when dealing with binaryif you want to read by line you have to stringify your binarydataI added some example in the beginning on whats happening with binary and string convert functionsuse filehandle instead of opening everytime data.txtadvice: first build it uncrypted (i left the commented lines in there) #include <ButtonConstants.au3> #include <GUIConstantsEx.au3> #include <StaticConstants.au3> #include <WindowsConstants.au3> #include <AutoItConstants.au3> #include <Array.au3> #include <FileConstants.au3> #include <MsgBoxConstants.au3> #include <WinAPIFiles.au3> #include <File.au3> #Include <Timers.au3> #include <Crypt.au3> #include <GuiEdit.au3> $Form1 = GUICreate("Pie", 170, 235, 190, 200) local $usernames[0] local $passwords[0] $myText="Hello World" consolewrite($myText & " string() := " & string($myText) & @CRLF) consolewrite($myText & " binaryTostring() := " & binaryTostring($myText) & @CRLF) consolewrite($myText & " stringtobinary() := " & stringtoBinary($myText) & @CRLF) consolewrite($myText & " binary() := " & binary($myText) & @CRLF) consolewrite($myText & " binarytostring(binary()) := " & binarytostring(binary($myText)) & @CRLF) $myText="0x48656C6C6F20576F726C64" consolewrite($myText & " string() := " & string($myText) & @CRLF) consolewrite($myText & " binaryTostring() := " & binaryTostring($myText) & @CRLF) consolewrite($myText & " stringtobinary() := " & stringtoBinary($myText) & @CRLF) consolewrite($myText & " binary() := " & binary($myText) & @CRLF) consolewrite($myText & " binarytostring(binary()) := " & binarytostring(binary($myText)) & @CRLF) global $selectuser = GUICtrlCreateCombo("", 21, 95, 130, 20) $addusername = GUICtrlCreateButton("Add", 21, 170, 130, 30) $usernamefield = GUICtrlCreateInput("", 21, 120, 130, 20) $passwordfield = GUICtrlCreateInput("", 21, 145, 130, 20, 0x0020) func encrypt() Local $hFileOpen = FileOpen("data.txt", $FO_APPEND) ;~ Local $hFileOpen = FileOpen("data.txt", $FO_OVERWRITE + $FO_BINARY) if guictrlread($usernamefield) <> "" then ;~ local $encryptedusername = string(guictrlread($usernamefield)) ;~ local $encryptedpassword = string(guictrlread($passwordfield)) local $encryptedusername = string(_Crypt_EncryptData(guictrlread($usernamefield), "P14h735536jk3fvvbg", $CALG_AES_128)) local $encryptedpassword = string(_Crypt_EncryptData(guictrlread($passwordfield ), "P14h735536jk3fvvbg", $CALG_AES_128)) FileWrite($hFileOpen, $encryptedusername & @CRLF) FileWrite($hFileOpen, $encryptedpassword & @CRLF) EndIf FileClose($hFileOpen) EndFunc func decrypt() Local $hFileOpen = FileOpen("data.txt", $FO_READ) consolewrite(_FileCountLines("data.txt") & " lines in the file" & @CRLF) for $i = 1 to _FileCountLines("data.txt")/2 local $encryptedusername = FileReadLine($hFileOpen) local $encryptedpassword = FileReadLine($hFileOpen) consolewrite($encryptedusername & @CRLF) consolewrite($encryptedpassword & @CRLF) ;~ _ArrayAdd($usernames, FileReadLine($hFileOpen)) ;~ _ArrayAdd($passwords, FileReadLine($hFileOpen)) _ArrayAdd($usernames, binarytostring(_Crypt_DecryptData(binary($encryptedusername), "P14h735536jk3fvvbg", $CALG_AES_128))) _ArrayAdd($passwords, binarytostring(_Crypt_DecryptData(binary($encryptedpassword), "P14h735536jk3fvvbg", $CALG_AES_128))) Next FileClose($hFileOpen) consolewrite(ubound($usernames) & " entries in array") _arraydisplay($usernames) if ubound($userNames)> 0 then for $i = 0 to ubound($usernames)-1 GUICtrlSetData($selectuser, $usernames[$i] & @CRLF) next EndIf endfunc func updatecomboandinfo() if not GUICtrlRead($usernamefield) = "" Then _ArrayAdd($usernames, GUICtrlRead($usernamefield)) _ArrayAdd($passwords, GUICtrlRead($passwordfield)) GUICtrlSetData($selectuser, $usernames[UBound($usernames)-1]) EndIf EndFunc decrypt() GUISetState(@SW_SHOW) While True $nMsg = GUIGetMsg() Switch $nMsg Case $GUI_EVENT_CLOSE Exit Case $addusername updatecomboandinfo() encrypt() GUICtrlSetData($usernamefield, "") GUICtrlSetData($passwordfield, "") EndSwitch WEnd

You can look at the link in my signature for the GUIRegisterMsg demo script I wrote, play around with it by adding an edit control to the GUI and see what results you get.

Look in the help file under _GUICtrlEdit_Create, the example script demonstrates how to do that.

ControlSetText("CAESAR II 2014 - InstallShield Wizard", "&Serial Number:","[CLASS:Edit; INSTANCE:1]", "123456789")

I read your post a couple of times. I think you are saying that it does not work without a window for a program to detect the changes. If so, that is in line with the explanation in the help file: "Retrieves the active input locale identifier for the specified window". I think you can do it from the command line as discussed here: http://superuser.com/questions/841236/how-to-know-which-keyboard-layout-is-currently-active-using-cmd-in-windows-7-32b

Melba23, I find it easier to work with GUI in AutoIt so I want to leave AHK behind (in the future) for that reason. ,O

Change exit in your two data routines to "return". Kylomas

i suspect that (a) you need to RequireAdmin in the EXE and (b) you need to ensure that the batch process is allowed to run with same inherited permissions or elevated permissions. Also, see the difference between ControlSend and Send for some background info Note that Windows can suppress processes where the user is not currently logged on. AV software can also suppress such processes. I would really like to hear of your solution, as I struggle with something similar. EDIT: See post #20 by AdamUL

He wants the version of AutoIt to be part of the filename of the installer (like the installers from the archive) instead of the generic autoit-v3-setup.exe. I can agree with that, but it seems he was more troubled because he couldn't find the old versions (even though the link is there if you look for it)

I just got it to work! I was having much trouble, reading all the threads and posts related to ImageSearch, and I'd like to help others now. Now got it to work as a x64 and also as a x32 script using both DLLs accordingly (on a Windows 8.1 x64 PC) One of the steps I took in debugging was putting this into (the top of) my script: $sOSArch = @OSArch ;Check if running on x64 or x32 Windows ;@OSArch Returns one of the following: "X86", "IA64", "X64" - this is the architecture type of the currently running operating system. ConsoleWrite("$sOSArch=" & $sOSArch & @CR) $sAutoItX64 = @AutoItX64 ;Check if using x64 AutoIt ;@AutoItX64 Returns 1 if the script is running under the native x64 version of AutoIt. ConsoleWrite("$sAutoItX64=" & $sAutoItX64 & @CR)In any case you want to be consistent about 32bit or 64bit usage, and use the right DLL etc. What also really helped was putting in lots of debugging and error handling to zoom in on whatever specific part isn't working and why. Credits to Centrally (very helpful usage explanation and re-uploading the files) and kangkeng for making this possible in AutoIt, as well Miguel7 from the AutoHotKey forum who also posted some helpful advice. I've attached a zipped folder containing all of the needed Dlls and my customised Library, which also contains an example and some debugging: ImageSearch2015.zip Take a look inside ImageSearch2015.au3 here if you like: Edit: also uploaded "ImageSearch15.au3", a version of "my" ImageSearch Library without the built-in Example and Debugging (will require the Dlls in the .zip file though): ImageSearch15.au3 I hope this helps somebody! Let me know any feedback/issues.