Leaderboard

Great. I tried to keep it as simple and to the point as possible, without using any includes and just a dash of error checking.

Well done and congratulations to both of you. Thanks for your participation, and thanks also to jaberwacky. JohnOne, I was going to give you a trophy, but I see you have one already. Maybe you can have two trophies. I sent you a PM.

A Note to Voters The entries for this challenge appear in the following two posts below this one. The purpose here is to demonstrate AutoIt to a beginner. The code should be easy to follow if you are a beginner. Speculation about the authors is expected, but remember it is the code you are voting for, not the person who wrote it. Before casting a vote please read the 7 criteria listed below. You are entitled to cast one vote for one piece of code which you think would make a good example for the wikipedia article. A Note to Participants Although it may be tempting, I would like it if you refrain from dropping hints to the voters once voting begins. Deadline for Voting Voting will last approximately 3 days until midnight GMT on 23rd of February. In the Event of a Tie If there is no clear winner after the period for voting has ended, finalists will be selected and voting will go to sudden death, whereby whichever of the the remaining contestants has the most votes at a time determined without forewarning by the arbiter, will be declared the winner. If it is still neck and neck after this period has elapsed, the winner will be selected using a formula. ; $iWinner = Mod(StringLen("JohnOne" & "Xandy"), 2) ; Now we've seen what the community can do, it's time for us MVPs to be judged by the community. What has been suggested is that a second example ought to be written to demonstrate a simple automation task to an absolute beginner. So let's show the community what we can do! You are allowed no more than 32 lines of code including comments. As before, the new example should: 1. comply to standard coding practices 2. be easy to follow 3. do something useful 4. be of interest to a wide audience 5. comply with the rules of the forum 6. not be longer than exactly 32 lines of code 7. convey the ease of use of AutoIt to beginners Names will be removed from submissions by an independant arbiter before being judged. The community will vote for the code they like best. Only current MVPs are allowed to enter, and no MVP is entitled to vote for the winner. Team efforts can also be submitted. The deadline for submissions will be 20th February 2015. The arbiter is jaberwacky once more. All submissions should be sent to the arbiter. The community will be given three days to vote for the winner, once jaberwacky has posted the examples we send to him. After voting has finished jaberwacky will reveal the name of the MVP whose code you like best. Good luck to everyone! The winning examples from both challenges will be added to the Wikipedia page.

The winner is JohnOne! Xandy is the runner up!

This UDF allows to set an events handler for Mouse device. The beginning... I searched for a way to disable the Mouse Primary click, and be able to call some function when the click event is received... Big thanks to amel27 for this one, i only organized the whole stuff to UDF style. Example: #include <GUIConstantsEx.au3> #include "MouseOnEvent.au3" HotKeySet("{ESC}", "_Quit") _Example_Intro() _Example_Limit_Window() Func _Example_Intro() MsgBox(64, "Attention!", "Let's set event function for mouse wheel *scrolling* up and down", 5) ;Set event function for mouse wheel *scrolling* up/down and primary button *down* action (call our function when the events recieved) _MouseSetOnEvent($MOUSE_WHEELSCROLLDOWN_EVENT, "_MouseWheel_Events") _MouseSetOnEvent($MOUSE_WHEELSCROLLUP_EVENT, "_MouseWheel_Events") _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT, "_MousePrimaryDown_Event") Sleep(3000) ;UnSet the events _MouseSetOnEvent($MOUSE_WHEELSCROLLDOWN_EVENT) _MouseSetOnEvent($MOUSE_WHEELSCROLLUP_EVENT) _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT) ToolTip("") MsgBox(64, "Attention!", "Now let's disable Secondary mouse button up action, and call our event function.", 5) _MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT, "_MouseSecondaryUp_Event", 0, 1) Sleep(5000) _MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT) ToolTip("") EndFunc Func _Example_Limit_Window() Local $hGUI = GUICreate("MouseOnEvent UDF Example - Restrict events on specific window") GUICtrlCreateLabel("Try to click on that specific GUI window", 40, 40, 300, 30) GUICtrlSetFont(-1, 12, 800) GUICtrlCreateLabel("Press <ESC> to exit", 10, 10) GUISetState() _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT, "_MousePrimaryDown_Event", $hGUI) ;A little(?) bugie when you mix different events :( ;_MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT, "_MouseSecondaryUp_Event", $hGUI) While 1 Switch GUIGetMsg() Case $GUI_EVENT_CLOSE ExitLoop Case $GUI_EVENT_PRIMARYDOWN MsgBox(0, "", "Should not be shown ;)") EndSwitch WEnd _MouseSetOnEvent($MOUSE_PRIMARYDOWN_EVENT) ;_MouseSetOnEvent($MOUSE_SECONDARYUP_EVENT) EndFunc Func _MouseWheel_Events($iEvent) Switch $iEvent Case $MOUSE_WHEELSCROLLDOWN_EVENT ToolTip("Wheel Mouse Button (scrolling) DOWN Blocked") Case $MOUSE_WHEELSCROLLUP_EVENT ToolTip("Wheel Mouse Button (scrolling) UP Blocked") EndSwitch Return $MOE_BLOCKDEFPROC ;Block EndFunc Func _MousePrimaryDown_Event() ToolTip("Primary Mouse Button Down Blocked") Return $MOE_BLOCKDEFPROC ;Block EndFunc Func _MouseSecondaryUp_Event() ToolTip("Secondary Mouse Button Up Blocked") EndFunc Func _Quit() Exit EndFunc Available Events Constants: ------------------------------------------ CHANGELOG: Download: Attached: MouseOnEvent_2.4.zip Old version: MouseOnEvent.zip - v2.3 MouseOnEvent_2.1.zip MouseOnEvent_2.0.zip MouseOnEvent_UDF_1.9.zip MouseSetOnEvent_UDF_1.8.zip MouseSetOnEvent_UDF_1.7.zip MouseSetOnEvent_UDF_1.6.zip MouseSetOnEvent_UDF_1.5.zip MouseSetOnEvent_UDF_1.4.zip MouseSetOnEvent_UDF_1.3.zip Previous downloads: 146 + 200 + 804 MouseOnEvent.zip MouseOnEvent.zip

Hi guys, there is no UDF wrappers for GetAdaptersAddresses API... till now Here you are: ; #FUNCTION# ==================================================================================================================== ; Name...........: _WinAPI_GetAdaptersAddresses ; Description ...: Retrieves the addresses associated with the adapters on the local computer. ; Syntax.........: _WinAPI_GetAdaptersAddresses($iFamily = 2, $iShowAll = 1, $iShowTunnel = 0) ; Parameters ....: $iFamily - IP type. ; |0 - Both ; |2 - IPv4 (default) ; |23 - IPv6 ; $iShowAll - Presentation mode ; |0 - Short: only Unicast address(es) and Friendly Name columns are returned ; |1 - Long (default): all columns are returned but Anycast and Multicast columns return only the first address (it is not an array) ; |2 - Complete: all columns are returned, Anycast and Multicast columns return an array with the complete list of addresses ; $iShowTunnel - Shows or not tunnel interfaces ; |0 - Don't show (default) ; |1 - Show ; Return values .: On success it returns a bidimensional array: on rows there is the adapter list, these are the columns ; |0 - Preferred unicast address(es), it returns an array of addresses only if $iFamily == 0 ; |1 - Friendly name ; |2 - Anycast addresses: if $iShowAll == 1 it returns the first anycast address of the list, ; if $iShowAll == 2 it returns an array with the complete list of anycast addresses ; |3 - Multicast addresses: if $iShowAll == 1 it returns the first multicast address of the list, ; if $iShowAll == 2 it returns an array with the complete list of multicast addresses ; |4 - DNS Server 1 address ; |5 - DNS Server 2 address ; |6 - Adapter Name ; |7 - Description ; |8 - MAC address ; |9 - Interface Type ; for example $array[2][8] represents the MAC address of the third adapter ; ; On failure it returns 0 and sets @error to non zero (these values are useful only for debugging reasons): ; |1 - incorrect parameters ; |2 - DllOpen error ; |3 - DllCall error ; |4 - _WinAPI_GetString error ; |5 - Query for IPv6 addresses and IPv6 is not installed on the OS ; Author ........: j0kky ; Modified ......: 1.1.3 13/02/15 ; Remarks .......: This function is fully compatible with all OS from Windows XP onwards, there can be some problem using this function ; with $iFamily == 23 if the OS is prior to Windows XP SP1 ; Link ..........: https://msdn.microsoft.com/en-us/library/windows/desktop/aa365915(v=vs.85).aspx ; =============================================================================================================================== #include <WinAPIMisc.au3> Func _WinAPI_GetAdaptersAddresses($iFamily = 2, $iShowAll = 1, $iShowTunnel = 0) If Not ($iFamily == 0 Or $iFamily == 2 Or $iFamily == 23) Or _ Not ($iShowAll == 0 Or $iShowAll == 1 Or $iShowAll == 2) Or _ Not ($iShowTunnel == 0 Or $iShowTunnel == 1) Then Return SetError(1, 0, 0) Local $aRet If $iFamily == 23 Then $aRet = DllCall("Ws2_32.dll", "int", "WSCEnumProtocols", "ptr", Null, "ptr", Null, "dword*", Null, "ptr", Null) Local $tlpProtocolBuffer = DllStructCreate("byte[" & $aRet[3] & "]") Local $plpProtocolBuffer = DllStructGetPtr($tlpProtocolBuffer) $aRet = DllCall("Ws2_32.dll", "int", "WSCEnumProtocols", "ptr", Null, "ptr", $plpProtocolBuffer, "dword*", $aRet[3], "ptr", Null) Local $tagWSAPROTOCOL_INFOW = "dword dwServiceFlags1; dword dwServiceFlags2; dword dwServiceFlags3; dword dwServiceFlags4; dword dwServiceFlags5; byte ProviderId[16]; " & _ "dword dwCatalogEntryId; " & _ "STRUCT; int ChainLen; dword ChainEntries[7]; ENDSTRUCT;" & _ ;ProtocolChain "int iVersion; int iAddressFamily; int iMaxSockAddr; int iMinSockAddr; int iSocketType; int iProtocol; int iProtocolMaxOffset; int iNetworkByteOrder; " & _ "int iSecurityScheme; dword dwMessageSize; dword dwProviderReserved; wchar szProtocol[256]" Local $tWSAPROTOCOL_INFOW, $size For $i = 0 To $aRet[0] - 1 If $i == 0 Then $tWSAPROTOCOL_INFOW = DllStructCreate($tagWSAPROTOCOL_INFOW, $plpProtocolBuffer) Else $tWSAPROTOCOL_INFOW = DllStructCreate($tagWSAPROTOCOL_INFOW, $plpProtocolBuffer + $size) EndIf If DllStructGetData($tWSAPROTOCOL_INFOW, "iAddressFamily") == 23 Then ExitLoop If $i == ($aRet[0] - 1) Then Return SetError(5, 0, 0) ;if IPv6 is not installed on the system $size += DllStructGetSize($tWSAPROTOCOL_INFOW) Next EndIf $hIphlpapi = DllOpen("Iphlpapi.dll") If @error Then Return SetError(2, 0, 0) $aRet = DllCall($hIphlpapi, "ULONG", "GetAdaptersAddresses", "ULONG", $iFamily, "ULONG", 0, "ptr", Null, "ptr", Null, "dword*", 0) If @error Then DllClose($hIphlpapi) Return SetError(3, 0, 0) EndIf Local $tbuffer_AdapterAddresses = DllStructCreate("byte[" & $aRet[5] & "]") Local $pbuffer_AdapterAddresses = DllStructGetPtr($tbuffer_AdapterAddresses) DllCall($hIphlpapi, "ULONG", "GetAdaptersAddresses", "ULONG", $iFamily, "ULONG", 0, "ptr", Null, "ptr", $pbuffer_AdapterAddresses, "dword*", $aRet[5]) If @error Then DllClose($hIphlpapi) Return SetError(3, 0, 0) EndIf DllClose($hIphlpapi) Local Const $tagIP_ADAPTER_ADDRESSES = "ulong Length; dword IfIndex; ptr Next; ptr AdapterName; ptr FirstUnicastAddress; ptr FirstAnycastAddress; " & _ "ptr FirstMulticastAddress; ptr FirstDnsServerAddress; ptr DnsSuffix; ptr Description; ptr FriendlyName; byte PhysicalAddress[8]; dword PhysicalAddressLength; " & _ "dword Flags; dword Mtu; dword IfType; int OperStatus" ;valid on Windows XP #cs "dword Ipv6IfIndex; dword ZoneIndices[16]; ptr FirstPrefix; " & _ ;added on WinXP SP1 "uint64 TransmitLinkSpeed; uint64 ReceiveLinkSpeed; ptr FirstWinsServerAddress; ptr FirstGatewayAddress; ulong Ipv4Metric; ulong Ipv6Metric; uint64 Luid; " & _ "STRUCT; ptr Dhcpv4ServerlpSockaddr; int Dhcpv4ServeriSockaddrLength; ENDSTRUCT; " & _ ;Dhcpv4Server "uint CompartmentId; byte NetworkGuid[16]; int ConnectionType; int TunnelType; " & _ "STRUCT; ptr Dhcpv6ServerlpSockaddr; int Dhcpv6ServeriSockaddrLength; ENDSTRUCT; " & _ ;Dhcpv6Server "byte Dhcpv6ClientDuid[130]; ulong Dhcpv6ClientDuidLength; ulong Dhcpv6Iaid; " & _ ;added on WinVista "ptr FirstDnsSuffix" ;added on WinVista SP1 #ce Local Const $tagIP_ADAPTER_UNICAST_ADDRESS = "ulong Length; dword Flags; ptr Next; " & _ "STRUCT; ptr AddresslpSockaddr; int AddressiSockaddrLength; ENDSTRUCT; " & _ ;Address "int PrefixOrigin; int SuffixOrigin; int DadState; ulong ValidLifetime; ulong PreferredLifetime; ulong LeaseLifetime" #cs "byte OnLinkPrefixLength" ;added on WinVista #ce Local $tIP_ADAPTER_ADDRESSES = DllStructCreate($tagIP_ADAPTER_ADDRESSES, $pbuffer_AdapterAddresses) Local $nAdapter = 0, $pUnicastAddress, $tIP_ADAPTER_UNICAST_ADDRESS, $plpSockaddr, $iSockaddrLength, $tbuffer_lpszAddressString, $pbuffer_lpszAddressString Local Const $IfOperStatusUp = 1, $IF_TYPE_SOFTWARE_LOOPBACK = 24, $IF_TYPE_TUNNEL = 131, $IpDadStatePreferred = 4, $pNull = Ptr(0) If $iShowAll Then Local $nColumns = 10 Local Const $tagIP_ADAPTER_ANYCAST_ADDRESS = "ulong Length; dword Flags; ptr Next; " & _ "STRUCT; ptr AddresslpSockaddr; int AddressiSockaddrLength; ENDSTRUCT" ;Address Local Const $tagIP_ADAPTER_MULTICAST_ADDRESS = $tagIP_ADAPTER_ANYCAST_ADDRESS Local Const $tagIP_ADAPTER_DNS_SERVER_ADDRESS = "ulong Length; dword Reserved; ptr Next; " & _ "STRUCT; ptr AddresslpSockaddr; int AddressiSockaddrLength; ENDSTRUCT" ;Address Local $pAnycastAddress, $tIP_ADAPTER_ANYCAST_ADDRESS, $pMulticastAddress, $tIP_ADAPTER_MULTICAST_ADDRESS, $pDnsServerAddress, $tADAPTER_DNS_SERVER_ADDRESS, $sMAC Local Const $IF_TYPE_ETHERNET_CSMACD = 6, $IF_TYPE_IEEE80211 = 71, $IF_TYPE_IEEE1394 = 144 Else Local $nColumns = 2 EndIf Local $aResult[$nAdapter][$nColumns] $hWs2_32 = DllOpen("Ws2_32.dll") If @error Then Return SetError(2, 0, 0) TCPStartup() Do If DllStructGetData($tIP_ADAPTER_ADDRESSES, "OperStatus") == $IfOperStatusUp And _ Not (DllStructGetData($tIP_ADAPTER_ADDRESSES, "IfType") == $IF_TYPE_SOFTWARE_LOOPBACK) And _ (Not (DllStructGetData($tIP_ADAPTER_ADDRESSES, "IfType") == $IF_TYPE_TUNNEL) Or $iShowTunnel) Then ;if it's connected and it is not a loopback and it is a tunnel interface (only if $iShowTunnel == 1) $nAdapter += 1 ReDim $aResult[$nAdapter][$nColumns] ;Unicast address(es) $pUnicastAddress = DllStructGetData($tIP_ADAPTER_ADDRESSES, "FirstUnicastAddress") $tIP_ADAPTER_UNICAST_ADDRESS = DllStructCreate($tagIP_ADAPTER_UNICAST_ADDRESS, $pUnicastAddress) If Not $iFamily Then Local $aAddresses[0], $iCounter = -1 Do ;write the PREFERRED address for this adapter, it writes both IPV4 and IPV6 preferred addresses in an array if $iFamily == 0 If DllStructGetData($tIP_ADAPTER_UNICAST_ADDRESS, "DadState") == $IpDadStatePreferred Then $plpSockaddr = DllStructGetData($tIP_ADAPTER_UNICAST_ADDRESS, "AddresslpSockaddr") $iSockaddrLength = DllStructGetData($tIP_ADAPTER_UNICAST_ADDRESS, "AddressiSockaddrLength") $aRet = DllCall($hWs2_32, "int", "WSAAddressToString", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "byte*", Null, "dword*", 0) If @error Then DllClose($hWs2_32) Return SetError(3, 0, 0) EndIf $tbuffer_lpszAddressString = DllStructCreate("wchar[" & $aRet[5] & "]") $pbuffer_lpszAddressString = DllStructGetPtr($tbuffer_lpszAddressString) $aRet = DllCall($hWs2_32, "int", "WSAAddressToStringW", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "ptr", $pbuffer_lpszAddressString, "dword*", $aRet[5]) If @error Then DllClose($hWs2_32) Return SetError(3, 0, 0) EndIf If $iFamily Then $aResult[$nAdapter - 1][0] = _WinAPI_GetString($pbuffer_lpszAddressString) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf ExitLoop Else $iCounter = UBound($aAddresses) ReDim $aAddresses[$iCounter + 1] $aAddresses[$iCounter] = _WinAPI_GetString($pbuffer_lpszAddressString) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf EndIf EndIf $pUnicastAddress = DllStructGetData($tIP_ADAPTER_UNICAST_ADDRESS, "Next") If Not ($pUnicastAddress == $pNull) Then $tIP_ADAPTER_UNICAST_ADDRESS = DllStructCreate($tagIP_ADAPTER_UNICAST_ADDRESS, $pUnicastAddress) EndIf Until $pUnicastAddress == $pNull If Not $iFamily Then If $iCounter < 0 Then ReDim $aAddresses[1] ;if there is no preferred unicast addresses for this adapter, I don't know if it can happens $aResult[$nAdapter - 1][0] = $aAddresses EndIf ;FriendlyName $aResult[$nAdapter - 1][1] = _WinAPI_GetString(DllStructGetData($tIP_ADAPTER_ADDRESSES, "FriendlyName")) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf If $iShowAll Then ;Anycast address, it shows only the first one if $iShowAll == 1 $pAnycastAddress = DllStructGetData($tIP_ADAPTER_ADDRESSES, "FirstAnycastAddress") If Not ($pAnycastAddress == $pNull) Then $tIP_ADAPTER_ANYCAST_ADDRESS = DllStructCreate($tagIP_ADAPTER_ANYCAST_ADDRESS, $pAnycastAddress) If $iShowAll == 2 Then Local $aAddresses[0] While $pMulticastAddress <> $pNull $plpSockaddr = DllStructGetData($tIP_ADAPTER_ANYCAST_ADDRESS, "AddresslpSockaddr") $iSockaddrLength = DllStructGetData($tIP_ADAPTER_ANYCAST_ADDRESS, "AddressiSockaddrLength") $aRet = DllCall($hWs2_32, "int", "WSAAddressToString", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "byte*", Null, "dword*", 0) If @error Then DllClose($hWs2_32) Return SetError(3, 0, 0) EndIf $tbuffer_lpszAddressString = DllStructCreate("wchar[" & $aRet[5] & "]") $pbuffer_lpszAddressString = DllStructGetPtr($tbuffer_lpszAddressString) $aRet = DllCall($hWs2_32, "int", "WSAAddressToStringW", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "ptr", $pbuffer_lpszAddressString, "dword*", $aRet[5]) If @error Then DllClose($hWs2_32) Return SetError(3, 0, 0) EndIf If $iShowAll == 2 Then $iCounter = UBound($aAddresses) ReDim $aAddresses[$iCounter + 1] $aAddresses[$iCounter] = _WinAPI_GetString($pbuffer_lpszAddressString) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf Else $aResult[$nAdapter - 1][2] = _WinAPI_GetString($pbuffer_lpszAddressString) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf ExitLoop EndIf $pAnycastAddress = DllStructGetData($tIP_ADAPTER_ANYCAST_ADDRESS, "Next") If Not ($pAnycastAddress == $pNull) Then $tIP_ADAPTER_ANYCAST_ADDRESS = DllStructCreate($tagIP_ADAPTER_ANYCAST_ADDRESS, $pAnycastAddress) EndIf WEnd If $iShowAll == 2 Then If $aAddresses[0] Then $aResult[$nAdapter - 1][2] = $aAddresses EndIf EndIf ;Multicast address, it shows only the first one if $iShowAll == 1 $pMulticastAddress = DllStructGetData($tIP_ADAPTER_ADDRESSES, "FirstMulticastAddress") If Not ($pMulticastAddress == $pNull) Then $tIP_ADAPTER_MULTICAST_ADDRESS = DllStructCreate($tagIP_ADAPTER_MULTICAST_ADDRESS, $pMulticastAddress) If $iShowAll == 2 Then Local $aAddresses[0] While $pMulticastAddress <> $pNull $plpSockaddr = DllStructGetData($tIP_ADAPTER_MULTICAST_ADDRESS, "AddresslpSockaddr") $iSockaddrLength = DllStructGetData($tIP_ADAPTER_MULTICAST_ADDRESS, "AddressiSockaddrLength") $aRet = DllCall($hWs2_32, "int", "WSAAddressToString", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "byte*", Null, "dword*", 0) If @error Then DllClose($hWs2_32) Return SetError(3, 0, 0) EndIf $tbuffer_lpszAddressString = DllStructCreate("wchar[" & $aRet[5] & "]") $pbuffer_lpszAddressString = DllStructGetPtr($tbuffer_lpszAddressString) $aRet = DllCall($hWs2_32, "int", "WSAAddressToStringW", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "ptr", $pbuffer_lpszAddressString, "dword*", $aRet[5]) If @error Then DllClose($hWs2_32) Return SetError(3, 0, 0) EndIf If $iShowAll == 2 Then $iCounter = UBound($aAddresses) ReDim $aAddresses[$iCounter + 1] $aAddresses[$iCounter] = _WinAPI_GetString($pbuffer_lpszAddressString) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf Else $aResult[$nAdapter - 1][3] = _WinAPI_GetString($pbuffer_lpszAddressString) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf ExitLoop EndIf $pMulticastAddress = DllStructGetData($tIP_ADAPTER_MULTICAST_ADDRESS, "Next") If Not ($pMulticastAddress == $pNull) Then $tIP_ADAPTER_MULTICAST_ADDRESS = DllStructCreate($tagIP_ADAPTER_MULTICAST_ADDRESS, $pMulticastAddress) EndIf WEnd If $iShowAll == 2 Then If $aAddresses[0] Then $aResult[$nAdapter - 1][3] = $aAddresses EndIf EndIf ;DnsServer 1 and 2 $pDnsServerAddress = DllStructGetData($tIP_ADAPTER_ADDRESSES, "FirstDnsServerAddress") If Not ($pDnsServerAddress == $pNull) Then $tADAPTER_DNS_SERVER_ADDRESS = DllStructCreate($tagIP_ADAPTER_DNS_SERVER_ADDRESS, $pDnsServerAddress) For $iCounter = 4 To 5 $plpSockaddr = DllStructGetData($tADAPTER_DNS_SERVER_ADDRESS, "AddresslpSockaddr") $iSockaddrLength = DllStructGetData($tADAPTER_DNS_SERVER_ADDRESS, "AddressiSockaddrLength") $aRet = DllCall($hWs2_32, "int", "WSAAddressToString", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "byte*", Null, "dword*", 0) If @error Then DllClose($hWs2_32) Return SetError(3, 0, 0) EndIf $tbuffer_lpszAddressString = DllStructCreate("wchar[" & $aRet[5] & "]") $pbuffer_lpszAddressString = DllStructGetPtr($tbuffer_lpszAddressString) $aRet = DllCall($hWs2_32, "int", "WSAAddressToStringW", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "ptr", $pbuffer_lpszAddressString, "dword*", $aRet[5]) If @error Then DllClose($hWs2_32) Return SetError(3, 0, 0) EndIf $aResult[$nAdapter - 1][$iCounter] = _WinAPI_GetString($pbuffer_lpszAddressString) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf $pDnsServerAddress = DllStructGetData($tADAPTER_DNS_SERVER_ADDRESS, "Next") If Not ($pDnsServerAddress == $pNull) Then $tADAPTER_DNS_SERVER_ADDRESS = DllStructCreate($tagIP_ADAPTER_DNS_SERVER_ADDRESS, $pDnsServerAddress) Else ExitLoop EndIf Next EndIf ;AdapterName $aResult[$nAdapter - 1][6] = _WinAPI_GetString(DllStructGetData($tIP_ADAPTER_ADDRESSES, "AdapterName"), False) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf ;Description $aResult[$nAdapter - 1][7] = _WinAPI_GetString(DllStructGetData($tIP_ADAPTER_ADDRESSES, "Description")) If @error And @error <> 10 Then DllClose($hWs2_32) Return SetError(4, 0, 0) EndIf ;MAC $sMAC = String(DllStructGetData($tIP_ADAPTER_ADDRESSES, "PhysicalAddress")) $aResult[$nAdapter - 1][8] = StringRegExpReplace( _ StringTrimRight(StringTrimLeft($sMAC, 2), _ ;0x StringLen($sMAC) - ((DllStructGetData($tIP_ADAPTER_ADDRESSES, "PhysicalAddressLength") * 2) + 2)), _ "(.{2})(?!$)", "$1-") ;from 0xG4V4B5B4V2N2000000 to G4-V4-B5-B4-V2-N2 ;IfType Switch DllStructGetData($tIP_ADAPTER_ADDRESSES, "IfType") Case $IF_TYPE_ETHERNET_CSMACD Switch @OSVersion Case "WIN_XP", "WIN_XPe", "WIN_2003" $aResult[$nAdapter - 1][9] = "Ethernet or wireless network interface" Case Else $aResult[$nAdapter - 1][9] = "Ethernet network interface" EndSwitch Case $IF_TYPE_IEEE80211 $aResult[$nAdapter - 1][9] = "Wireless network interface" Case $IF_TYPE_TUNNEL $aResult[$nAdapter - 1][9] = "Tunnel type encapsulation network interface" Case $IF_TYPE_IEEE1394 $aResult[$nAdapter - 1][9] = "Firewire network interface" Case Else $aResult[$nAdapter - 1][9] = "Other type of network interface" EndSwitch EndIf EndIf $pbuffer_AdapterAddresses = DllStructGetData($tIP_ADAPTER_ADDRESSES, "Next") If Not ($pbuffer_AdapterAddresses == $pNull) Then $tIP_ADAPTER_ADDRESSES = DllStructCreate($tagIP_ADAPTER_ADDRESSES, $pbuffer_AdapterAddresses) EndIf Until $pbuffer_AdapterAddresses == $pNull TCPShutdown() DllClose($hWs2_32) Return $aResult EndFunc ;==>_WinAPI_GetAdaptersAddresses It is really useful because it can retrieve all informations needed for every adapters and it works with IPv6 too (opposite of GetAdaptersInfo, that supports only IPv4). I've made it compatible with every OS (from Windows XP). Test it and report any bug in this topic, please! I've attached an example about how it can be used, enjoy it EDIT: Last UDF version: 13th February 2015 GetAdaptersAddresses.au3

Thank you too Xandy. I also thought it would be a fun thing to do and I'm very happy that you supported this.

Congratulations JohnOne! Thank you czardas, jaberwacky and everyone involved, that was fun!

Finally I solved the issue with Windows XP: WSAAddressToString on WinXP doesn't like the Null pointer as fourth parameter: $aRet = DllCall($hWs2_32, "int", "WSAAddressToString", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "ptr", Null, "dword*", 0) so, this is the workaround: $aRet = DllCall($hWs2_32, "int", "WSAAddressToString", "ptr", $plpSockaddr, "int", $iSockaddrLength, "ptr", Null, "byte*", Null, "dword*", 0) I've edited the first post with the correct UDF and the new example script. Thanks to Spider001 for testing my scripts Test it and report any bug in this topic, please!

Look in the UDF (last) section of the AutoIt Help file, plus there would be a lot of examples available from a search here at the forum.

If there is an SDK, it would be available from where the Dictionary has been provided, most likely. Danp2 could well be onto something though, which could effectively be like using an SDK.

So you are saying that when you select those text elements, nothing shows in the Visible Text or Hidden text tabs? When this happens to me, i try to use Send commands like TAB, RIGHT, DOWN, etc and then combinations like CTRL and HOME or END, including SHIFT, followed by a copy to clipboard of the highlighted result. That presumes, that you can actually highlight the respective text and use CTRL-C .... i.e. Send("^c") P.S. Or you might be lucky, and the Dictionary might have an SDK or command-line options.

Setting the Focus, is also a separate option available to you, other than being active or maximized or on top, etc. Focus can also be set to individual controls.

Alexxander, Not too difficult: #include <Array.au3> #include <String.au3> $sText = 'sometext"google.com/blablalba.html"somemore text' & @CRLF & _ 'sometext "facebook.com/test5.4 new"fsdfds' $aExtract = StringRegExp($sText, '"(.*)"', 3) _ArrayDisplay($aExtract, "RexEx", Default, 8) ; Or use _StringBetween $aExtract = _StringBetween($sText, '"', '"', $STR_ENDNOTSTART) _ArrayDisplay($aExtract, "_StringBetween", Default, 8) SRE decode " - Look for a " (.*) - capture all characters " - until the next " 3 - find all matches M23

'?do=embed' frameborder='0' data-embedContent>>

I never entered a punt until about 10 hours to go, never even noticed the thread

have you looked at StringRegExp

Something like this should work fine: Set objShell = CreateObject("Wscript.Shell") objShell.Run("""C:\Program Files (x86)\AutoIt3\aut2exe\aut2exe.exe"" /in ""t2 with space.au3"" /out ""t25 with space.au3""") Jos

Doubt that works in VBS as a single qoute means the rest of the line is treated as comment. @Zampoot, show us the exact line you coded in VBS. Jos

kcvinu, I am not suggesting that you are doing anything wrong, but please make sure you read the Keyloggers announcement before you post again. M23

BetaLeaf, AutoIt, like all programming languages, has an "operator precedence" list - for AutoIt this is set out in the Help file: When more than one operator is used in an expression the order in which things happen is controlled by operator precedence. The precedence used in AutoIt is given below. Where two operators have the same precedence the expression is evaluated left to right. From highest precedence to lowest: Not ^ * / + - & < > <= >= = <> == And Or So let us run through what happened in your comparison: ; Original not DriveGetFileSystem($DriveLetter) = 'abcd' ; DriveGetFileSystem always returns a value (either string or numeric) ; NOT is a Boolean operator and AutoIt interprets a value as TRUE, an empty string (") or 0 as FALSE ; So this line reads to AutoIt as not (TRUE) = "abcd" ; Highest operator is "NOT" and the line becomes FALSE = "abcd" ; Which is obviously not what you wanted to happen Happy so far? Now let us force operator precedence by adding parentheses which AutoIt actions before external operators ; Original not (DriveGetFileSystem($DriveLetter) = 'abcd') ; AutoIt actions the code inside the parentheses first and so we get (assuming the comparison is TRUE) not (TRUE) ; Which is what you wanted to happen All clear? M23

if your looking for your func to do something on specific key press look @ _IsPressed(), it check one specific key state and its gui independent. #include <Misc.au3> While 1 If _IsPressed('01') Then SplashTextOn('','Left Mouse Down',200,40) Do Sleep(10) Until Not _IsPressed('01') SplashOff() EndIf Wend Or look @ HotKeySet

AutoItX lets you call AutoIt functions from other programmling languages (VBS, C++ ...) COM allows you to interact from Autoit with products like MS Word, Excel, Outlook etc. In the AutoIt program directory there is a subdir called "AutoItX" with a CHM help file and an Examples subdir.

Another awesome, exciting update awaits! See the changelog in the >op for details.

I'm not familiar with command line compiling, But I'd first check that it works without spaces in the path or filename.

Can you compile a .zip file?

you could also try to use the other solution of the controlsend proposed by jdelaney, something like this ControlSend($hIE, "", "", "{ENTER}") instead of the external script in a way like in >this example related to a solution to a problem similar to the one you are talking about here.

maybe >this post could interest

BTW: Could you please give meaningful titles to your threads? So we do not have to open your thread just to know what you are talking about

clicks in IE don't return until you close dialogs opened by the browser So, you can start a new script to actually do the click, or do the focus and controlsend spacebar at the browser that opens the dialog, or start another script prior to the click to wait for the popup and fulfill it...then your primary script will proceed

Just to clarify, I wasn't correcting you jdelaney, just offering another option.

paexec is similar to psexec, with more params, and can be distributed in business without worrying about microsoft lawsuits.

What version of Windows are the client machines running? If it isn't possible to know, we'll at least assume that they are Vista+ since your server machine is 2008. PSExec.exe (Sysinternals: https://technet.microsoft.com/en-us/sysinternals/bb897553.aspx) PSExec will be your best friend here. There are other ways too, to accomplish your task, some of which being remote task scheduler, http downloads via powershell, etc. Example command would be: C: >psexec.exe 10.0.0.2,10.0.0.3,10.0.0.4 -c -f -h -u "Admin-Username" -p "Optional-Password" -w "Remote-Working-Directory" "Path-To-Local-Autoit-Script.exe" "Arg1" "Arg2" "Argn..."

psexec, too

---==== 1.8.4 ====--- - added version developed in the about child window - added tags quote, link, autoit (code). (all thanks for the Idea from The Saint's webpad - - added GUI Accelerator keys for tags. - added compiler GUI. - added ability to compile au3 scripts. - ability to open aut2exe for more options. small lil' update while I focus on add recent.

This thread never held any code and served no useful purpose other than to try and build up audience anticipation for a future commercial release. That is not what the Examples sections is for - it is to showcase what AutoIt can do. As a result the other posts in this thread have been deleted and only this comment remains. M23

When working with stream object you don't need file functions. Check the errors you get, methods for objects created with ObjectFromTag allways have $pSelf as first parameter in definitions. Yours don't, hence the errors. edit: Here (just changed your code a bit, paths also to work for me): ...Look only if you are desperate. It's really simple. Maybe. Sanity checking is missing.