New Scite4AutoIt3 installer

Jos · July 6, 2005

7/06/2005: Uploaded SciTe4AutoIt3.exe which contains the below updates.

It includes the new SciTE 1.64 release (see ScintillaHistory)

==> Visit the SciTe4AutoIt3 Download page for the latest versions

==> Find here the installation instructions for using AutoIT3 Production&Beta together with SciTE4AutoIT3.

==> Check the online documentation for an overview of all extra's you get with this installer.

Enjoy,

Updates:

07/06/2005
*** Updated installer with SciTE v1.64 
*** Updated installer not to prompt for the Definitions anymore. 
    It will now load the Beta definitions when the Autoit3\Beta version
    is installed, else the Latest production definition is loaded.
*** Changed Ctrl+F5 to run AU3Check with Production definitions and 
            Ctrl+Alt+F5 to run AU3Check with Beta definitions.
*** Updated CompileAU3:
    - Added commandline switch to just run AU3Check (/Au3check) and select Production (/prod) or Beta (/beta)
    - Added the possibility to specify the path to Reshacker.exe and RC.exe in CompileAU3.ini:
      [config]
      ResHackerPath=C:\Path-To-Reshacker.exe
      RCExePath=C:\Path-To-RC.exe
*** Changed default msgbox and Trace levels to 1 (Less info. ) to increase the level just copy the lines
    from au3.properties you your SciTEUser.properties and set them to the level you want.
*** Update SciLexer:
    Included fix from Scintilla CVS to solve empty autocomplete box on WinXP without SP1/2 installed.
    Fixed issue with Sendkeys in strings.
    Fixed issue with Commentblock lexing.
*** Updated AU3Check v1.43 (Tylo):
    added: Const parameters. Array initialization. Prevent redecl. of parameters.
*** Updated the abbreviations (Mhz)

Edited July 7, 2005 by JdeB

MSLx Fanboy · July 7, 2005

Is there a way I can set the beta def's if I overwrite the production AU3 files?

Edit: Sorry, I think I figured it out...I found the UpdateDefs script...

Edited July 7, 2005 by MSLx Fanboy

condoman · July 7, 2005

Thanks for your work.

FYI under the help topic Extra Utilities, the AutoIt3 Window Spy does not have any content.

jefhal · July 7, 2005

When I do an Alt-F5 with the new software (AutoIT+beta56+Scite) installed the script does not run. The message I get is:

>"C:\Program Files\AutoIt3\SciTe\CompileAU3\CompileAU3.exe" /run /beta /ErrorStdOut /in "C:\Program Files\AutoIt3\Examples\msgbox.au3" /autoit3dir "C:\Program Files\AutoIt3\beta" /UserParams
>Running AU3Check...C:\Program Files\AutoIt3\SciTe\Defs\Unstable\Au3Check\au3check.dat
>AU3Check Ended. No Error(s).
>Running: (3.1.1.56):C:\Program Files\AutoIt3\beta\autoit3.exe "C:\Program Files\AutoIt3\Examples\msgbox.au3"
>AutoIT3.exe ended.
>Exit code: 0 Time: 0.540

I must have installed incorrectly. Does anyone know how to fix this? Thanks...

Jos · July 7, 2005

Thanks for your work.
FYI under the help topic Extra Utilities, the AutoIt3 Window Spy does not have any content.
<{POST_SNAPBACK}>

That should be a relative link to the autoit.chm file which contains this info.

guess i will take out the link and just refer to the AutoIt helpfile for more info, since it can exist at different places....

Jos · July 7, 2005

When I do an Alt-F5 with the new software (AutoIT+beta56+Scite) installed the script does not run. The message I get is:
I must have installed incorrectly. Does anyone know how to fix this? Thanks...
<{POST_SNAPBACK}>

Dont know what could be wrong... the posted lines look normal to me.

Isn't any script running with Alt+F5 ?

w0uter · July 7, 2005

stupid Q but why a new thread ?

Jos · July 7, 2005

stupid Q but why a new thread ?
<{POST_SNAPBACK}>

Have started a new thread everytime the installer was upgraded with a new SciTE version to keep the threads readable for everybody...

Josbe · July 7, 2005

Have started a new thread everytime the installer was upgraded with a new SciTE version to keep the threads readable for everybody...
<{POST_SNAPBACK}>

Excellent. Thanks.

CyberSlug · July 7, 2005

The INI file created by your "Compile with Options" script allows the outfile to be a relative path, but icon keeps changing to a full path.

Could you allow the icon path in the INI file to be relative to the au3 file?

Keep up the great work

Jos · July 7, 2005

The INI file created by your "Compile with Options" script allows the outfile to be a relative path, but icon keeps changing to a full path.
Could you allow the icon path in the INI file to be relative to the au3 file?
Keep up the great work
<{POST_SNAPBACK}>

I am hardly using the Compile with Options GUI anymore, always use the Compiler directives to tell the compiler what i want...

Guess you are asking to make the GUI Icon field an input field like to outfile in stead of a label .... right ?

Edited July 7, 2005 by JdeB

CyberSlug · July 7, 2005

I am hardly using the Compile with Options GUI anymore, always use the Compiler directives to tell the compiler what i want...
Guess you are asking to make the GUI Icon field an input field like to outfile in stead of a label .... right ?
<{POST_SNAPBACK}>

Well, whenever I change the INI file to make the icon data relative, the INI value changes back to a full path whenever I recompile....

I have a AU3 script with custom icon that I want to make available to my co-workers, but the location (mapped drive letter) could be different for everyone..... If the INI file didn't keep resetting the path of the icon file, everything would work fine.

Edit:Well, icon=.\myIcon.ico within the INI file works without resetting. I could have sworn I tried that earlier Well, without the .\ the path changes.....

Hope that makes sense.

Thanks

Edited July 7, 2005 by CyberSlug

Jos · July 7, 2005

Well, whenever I change the INI file to make the icon data relative, the INI value changes back to a full path whenever I recompile....
I have a AU3 script with custom icon that I want to make available to my co-workers, but the location (mapped drive letter) could be different for everyone..... If the INI file didn't keep resetting the path of the icon file, everything would work fine.
Hope that makes sense.
Thanks
<{POST_SNAPBACK}>

This only happens when you don't have any "\" in the relative path.

If you just specify a filename CompileAU3 will first check the script directory for the ICON, then if it doesn't exists check the AutoItIcon directory and save this info in the INI.

To solve your issue, just add a backslash to the relative path, something like:

..\mydir\my.ico

Or add "#Compiler_Icon=my.ico" to the start of your script.

EDIT: Ahh... i see you found the \ solution...

Edited July 7, 2005 by JdeB

jefhal · July 7, 2005

Isn't any script running with Alt+F5 ?
<{POST_SNAPBACK}>

No, nothing appears on the screen. I also get the following error if I do a CTRL-F5:

>C:\Program Files\AutoIt3\SciTe\CompileAU3\CompileAU3.exe /prod /AU3Check /in "C:\Program Files\AutoIt3\Examples\JeffTests\test of msgbox.au3"
>%1 is not a valid Win32 application.

Jos · July 7, 2005

No, nothing appears on the screen. I also get the following error if I do a CTRL-F5:
<{POST_SNAPBACK}>

Have you followed these instructions: Installation ?

What OS are you running ?

jefhal · July 7, 2005

Have you followed these instructions: Installation ?
What OS are you running ?
<{POST_SNAPBACK}>

I had followed the instructions on the link, but I decided to uninstall everything, clean out the registry by hand, and reboot. Now all is working fine! By the way, whom do I blame for my addiction to AutoIT? I've even reformatted and printed out the entire help file in Word so I can learn everything about the program possible... Help!

Jos · August 11, 2005

Uploaded a new version of SciTe4Au3Upd.exe which contains the definitions for 3.1.1.66 BETA and some

Awesome Lua script changes

Valik wrote some LUA logic which will do the following:

- Automatically have the CallTip popup again when "," is hit when coding Functions

- Automatically have Autocomplete popup for Variables

This is really a big timesaver and really nice when coding...

==> Visit the SciTe4AutoIt3 Download page for the latest versions

==> Check the online documentation for a overview of all extras you get with the SciTE4AutoIt3 installer.

Separate files for BETA:

au3check.dat

au3.keywords.properties

Enjoy,

:whistle:

Edited August 11, 2005 by JdeB

Valik · August 11, 2005

Its funny that you make a release immediately after I discover a bug in my code. There is a bug in SciteMenuCommand that causes SciTE to throw an error (Lua, too) because files that haven't been saved to disk yet do not have a FilePath property. The fix is to replace the function with this one:

function SciteMenuCommand(n)
            -- If the file hasn't been saved to disk, FilePath isn't set so check for this
            if (props["FilePath"] ~= "") then
                scite.Open(props["FilePath"] .. "\nmenucommand:" .. n)
--~          else
--~              scite.Open("\"\"\nmenucommand:" .. n)
            end
            return false
        end -- SciteMenuCommand()

The offending code is commented out (I was experimenting with various ways to get this to work but couldn't and this was left-over test code). That is, in the code above, I've commented out the offending code, it is uncommented in the code I sent you.

The severity of this isn't much. It can only be induced by creating a new (empty) buffer and explicitly setting the language to AutoIt. This creates an unsaved file treated as an AutoIt script. Unless people do this a lot, this bug isn't that big of a deal.

Edit: Added sentence to (try to) clarify something.

Edited August 11, 2005 by Valik

Jos · August 11, 2005

Its funny that you make a release immediately after I discover a bug in my code. There is a bug in SciteMenuCommand that causes SciTE to throw an error (Lua, too) because files that haven't been saved to disk yet do not have a FilePath property. The fix is to replace the function with this one:
function SciteMenuCommand(n)
            -- If the file hasn't been saved to disk, FilePath isn't set so check for this
            if (props["FilePath"] ~= "") then
                scite.Open(props["FilePath"] .. "\nmenucommand:" .. n)
--~             else
--~                 scite.Open("\"\"\nmenucommand:" .. n)
            end
            return false
        end    -- SciteMenuCommand()
The offending code is commented out (I was experimenting with various ways to get this to work but couldn't and this was left-over test code). That is, in the code above, I've commented out the offending code, it is uncommented in the code I sent you.
The severity of this isn't much. It can only be induced by creating a new (empty) buffer and explicitly setting the language to AutoIt. This creates an unsaved file treated as an AutoIt script. Unless people do this a lot, this bug isn't that big of a deal.
Edit: Added sentence to (try to) clarify something.
<{POST_SNAPBACK}>

Updated the installer with this change....

:whistle:

MSLx Fanboy · August 11, 2005

Oh so beautiful...My only wish is that those pretty new features were implemented a few months ago :whistle:

New Scite4AutoIt3 installer

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Recently Browsing 0 members