Help with scite

[steveR]

Ok, I can't run any scripts from scite. When I updated scite the other day is when it started. I went through the registry and everything points to the right place.

I have all the latest updates. I am able to run scripts by launching autoit3.exe, I just can't run them from scite.

Anybody know what is going on?

Here is the console output when I try to run something:

>"C:\Program Files\AutoIt3\SciTe\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "C:\Documents and Settings\steve\My Documents\dev\autoit\working\test.au3"    
>Running AU3Check...
>AU3Check Ended.
>Running: \autoit3.exe /ErrorStdOut  "C:\Documents and Settings\steve\My Documents\dev\autoit\working\test.au3" 
>AutoIT3.exe ended.
>Exit code: 0   Time: 0.505

[kjactive]

Well it must be the path to Autoit3.exe - do the compile window popup? - if so this line could be the trouble '>Running: \autoit3.exe...' try to include the total path...

That's my best shot...

kj

Edited May 1, 2005 by kjactive

[Jos]

Ok, I can't run any scripts from scite. When I updated scite the other day is when it started. I went through the registry and everything points to the right place.

I have all the latest updates. I am able to run scripts by launching autoit3.exe, I just can't run them from scite.

Anybody know what is going on?

Here is the console output when I try to run something:

>"C:\Program Files\AutoIt3\SciTe\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "C:\Documents and Settings\steve\My Documents\dev\autoit\working\test.au3"    
>Running AU3Check...
>AU3Check Ended.
>Running: \autoit3.exe /ErrorStdOut  "C:\Documents and Settings\steve\My Documents\dev\autoit\working\test.au3" 
>AutoIT3.exe ended.
>Exit code: 0   Time: 0.505

<{POST_SNAPBACK}>

Do you have a Registry entry for:

"HKLM\Software\AutoIt v3\Autoit","InstallDir" ?

That is currently what CompileAU3 is using to run Autoit3 unless you have used a Compiler Directive :

#Compiler_AUTOIT3=C:\Program Files\AutoIt3\beta\AutoIt3.exe        ;Override the default Interpreter version.

[DaleHohm]

Yeah, I had this issue too. I found that it started when I updated with JdeB's latest ScTie update file.

I found that Alt-F5 to run Beta worked fine, but F5 gave what you see.

I looked in the SciTe au3.properties file (you can edit this from the SciTe Options drop-down) and found this section of code:

# Commands to compile / run your script 
command.compile.$(file.patterns.au3)=$(SciteDefaultHome)\CompileAU3\CompileAU3.exe /in "$(FilePath)"
command.build.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /CompileDefaults /in "$(FilePath)"
#command.build.$(file.patterns.au3)="$(autoit3dir)\aut2exe\aut2exe.exe" /in "$(FilePath)"
command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" $(1) $(2) $(3) $(4)
#command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" /autoit3dir "$(autoit3dir)" $(1) $(2) $(3) $(4)
#command.go.$(file.patterns.au3)="$(autoit3dir)\autoit3.exe" /ErrorStdOut "$(FilePath)" $(1) $(2) $(3) $(4)
command.go.subsystem.$(file.patterns.au3)=1

I removed the comment from the next-to-last line, saved the file and all is well again. Here is the modified code block:

# Commands to compile / run your script 
command.compile.$(file.patterns.au3)=$(SciteDefaultHome)\CompileAU3\CompileAU3.exe /in "$(FilePath)"
command.build.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /CompileDefaults /in "$(FilePath)"
#command.build.$(file.patterns.au3)="$(autoit3dir)\aut2exe\aut2exe.exe" /in "$(FilePath)"
command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" $(1) $(2) $(3) $(4)
#command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" /autoit3dir "$(autoit3dir)" $(1) $(2) $(3) $(4)
command.go.$(file.patterns.au3)="$(autoit3dir)\autoit3.exe" /ErrorStdOut "$(FilePath)" $(1) $(2) $(3) $(4)
command.go.subsystem.$(file.patterns.au3)=1

I'll leave it to JdeB to verify that this is all that is wrong/needed.

Dale

[Jos]

Yeah, I had this issue too.  I found that it started when I updated with JdeB's latest ScTie update file.

I found that Alt-F5 to run Beta worked fine, but F5 gave what you see.

command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" $(1) $(2) $(3) $(4)
#command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" /autoit3dir "$(autoit3dir)" $(1) $(2) $(3) $(4)
command.go.$(file.patterns.au3)="$(autoit3dir)\autoit3.exe" /ErrorStdOut "$(FilePath)" $(1) $(2) $(3) $(4)
command.go.subsystem.$(file.patterns.au3)=1

I'll leave it to JdeB to verify that this is all that is wrong/needed.

Dale

<{POST_SNAPBACK}>

The line you have Uncommented is the OLD line... this will only run AutoIt3 without running the Au3Check first!

The CompileAU3 wrapper was updated so it also can be used with GO, Running first AU3Check and then Autoit3.....

I was not aware that this new GO function was giving trouble to some. So let try to figure out why you see this issue ....

Maybe you could check to see if you have the above specified Registry entry.

The plan for the next version is to use the AutoIt directory as specified in AU3.properties using this line which is currently commented:

command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" /autoit3dir "$(autoit3dir)" $(1) $(2) $(3) $(4)

Maybe you could try it out this way for me to see if that works for you ? This will make the it totally independent of the Registry and will also work for the folks not using the installers....

Don't forget to Comment the other 2 lines for GO....

Thanks,

Jos

[DaleHohm]

The line you have Uncommented is the OLD line... this will only run AutoIt3 without running the Au3Check first!

Sorry, I didn't see your reply until after mine was posted.

The CompileAU3 wrapper was updated so it also can be used with GO, Running first AU3Check and then Autoit3.....

I was not aware that this new GO function was giving trouble to some. So let try to figure out why you see this issue ....

Maybe you could check to see if you have the above specified Registry entry.

Yes, I have that registry value and it point to: C:\Program Files\AutoIt3

which is my AutoIt install directory.

The plan for the next version is to use the AutoIt directory as specified in AU3.properties using this line which is currently commented:

command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" /autoit3dir "$(autoit3dir)" $(1) $(2) $(3) $(4)

Maybe you could try it out this way for me to see if that works for you ? This will make the it totally independent of the Registry and will also work for the folks not using the installers....

Don't forget to Comment the other 2 lines for GO....

<{POST_SNAPBACK}>

Yes, this works for me. Perhaps SteveR can confirm as well.

Thanks.

Dale

Edit: BTW, I've used a combination of Installer, Zip file and even copying the Beta directory on top of the production directory over the past few releases which might explain why my config is odd/unexpected.

Edited May 1, 2005 by DaleHohm

[SvenP]

....

Edit: BTW, I've used a combination of Installer, Zip file and even copying the Beta directory on top of the production directory over the past few releases which might explain why my config is odd/unexpected.

<{POST_SNAPBACK}>

Dale/Jos,

I got the very same problem after mixing up all those beta's. Since one of the last updates the 'Go' command couldn't find the 'release' AutoIt3.exe anymore.

The modified "command.go.$(file.patterns.au3)" fixed it on my computer too.

Regards,

-Sven

[tuape]

I had the same problem after running beta installer and scite update.

command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" /autoit3dir "$(autoit3dir)" $(1) $(2) $(3) $(4)

Uncommenting the line above (as JdeB suggested) and commenting this line

command.go.$(file.patterns.au3)="$(SciteDefaultHome)\CompileAU3\CompileAU3.exe" /run /ErrorStdOut /in "$(FilePath)" $(1) $(2) $(3) $(4)

seems to solve the problem.

[Jos]

Posted an updated version of SciTE4AU3Upd.exe which fixes this issue...

Thanks for the feedback

Edited May 1, 2005 by JdeB

[steveR]

Posted an updated version of SciTE4AU3Upd.exe which fixes this issue...

Yes! That has worked.

Thanks to everyone who responded