#AutoIt3Wrapper_Res_HiDpi=Y
#include <WinAPITheme.au3>

#include <Date.au3>

#include <WinAPI.au3>
#include <FontConstants.au3>
#include <ButtonConstants.au3>
#include <AutoItConstants.au3>

#include <AVIConstants.au3>
#include <GuiConstantsEx.au3>
#include <StaticConstants.au3>
#include <TreeViewConstants.au3>
#include <WindowsConstants.au3>

_Example()
Func _Example()
	;MsgBox(0, '', _GetDPI())
	_Data_OD_DO('test')
EndFunc


Func _GetDPI()
    Local $hDC = _WinAPI_GetDC(0)
    Local $DPI = _WinAPI_GetDeviceCaps($hDC, $LOGPIXELSY)
    _WinAPI_ReleaseDC(0, $hDC)
	;MsgBox(0, '$DPI', $DPI)

   Return Round($DPI, 2)
EndFunc


Func _Data_OD_DO($s_info, $data_od = Default, $data_do = Default, $bSQLDateFormat = False, $h_parent_windows = -1) ; Wynik to tablica IDX_0=OD DNIA 'YYYYMMDD 00:00:00.001'   IDX_1=DO DNIA 'YYYYMMDD 23:59:59.990'
	#forceref $h_parent_windows
	If $data_od = Default Then $data_od = _Now()
	If $data_do = Default Then $data_do = _Now()
	$s_info &= @CRLF & @CRLF & 'UWAGA:' & @CRLF & 'Klawisz ESC lub zamknięcie okna jest równoznaczne z naciśnięciem przycisku [ANULUJ]'
	Local $v_GUIOnEventMode = AutoItSetOption("GUIOnEventMode", 0)
	#Region ### START Koda GUI section ### Form=L:\TOOLs\Macro\------FORMULARZE_KODA\Data od do.kxf
	Local $Form_date_from_to = GUICreate("Data od ... do ....", 630, 392, 254, 114)
	GUISetFont(8.5)
	GUISetBkColor(0xA6CAF0)
	Local $MonthCal_FROM = GUICtrlCreateMonthCal($data_od, 10, 144, 300, 190)
	GUICtrlSetResizing(-1, $GUI_DOCKAUTO)
    _WinAPI_SetWindowTheme(GUICtrlGetHandle($MonthCal_FROM), "", "")

	Local $MonthCal_TO = GUICtrlCreateMonthCal($data_do, 320, 144, 300, 190)
	GUICtrlSetResizing(-1, $GUI_DOCKAUTO)
	Local $idButton_Wybierz = GUICtrlCreateButton("&Wybierz wskazny zakres dat", 70, 352, 190, 25, $BS_DEFPUSHBUTTON)
	GUICtrlSetBkColor(-1, 0x00FF00)
	GUICtrlSetResizing(-1, $GUI_DOCKAUTO)
	Local $idButton_Anuluj = GUICtrlCreateButton("&Anuluj", 380, 352, 190, 25)
	GUICtrlSetBkColor(-1, 0xFF0000)
	GUICtrlSetResizing(-1, $GUI_DOCKAUTO)
	Local $Label_DATA_OD = GUICtrlCreateLabel("OD DNIA :", 10, 126, 64, 17)
	GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
	GUICtrlSetResizing(-1, $GUI_DOCKAUTO)
	Local $Label_DATA_DO = GUICtrlCreateLabel("DO DNIA :", 320, 126, 64, 17)
	GUICtrlSetFont(-1, 8, 800, 0, "MS Sans Serif")
	GUICtrlSetResizing(-1, $GUI_DOCKAUTO)
;~ 	Local $Label_INFO = GUICtrlCreateLabel($s_info, 10, 10, 390, 110, $WS_BORDER, $WS_EX_CLIENTEDGE) ; nie potrzeba deklarować zmiennej
	GUICtrlCreateLabel($s_info, 10, 10, 610, 110, $WS_BORDER, $WS_EX_CLIENTEDGE)
	GUICtrlSetBkColor(-1, 0xFFFBF0)
	GUICtrlSetResizing(-1, $GUI_DOCKAUTO)
	GUISetState(@SW_SHOW)
	#EndRegion ### END Koda GUI section ###
	Local $nMsg
	Local $vReturnValue = ''
	WinSetOnTop("Data od ... do ....", $s_info, $WINDOWS_ONTOP)
	Local $Days_between
	WinSetOnTop($Form_date_from_to, '', $WINDOWS_ONTOP)
	While 1
		;_Check_Tray_State()
		$nMsg = GUIGetMsg()
		Switch $nMsg
			Case $GUI_EVENT_CLOSE
				$vReturnValue = False
				ExitLoop
			Case $idButton_Wybierz
				$Days_between = _DateDiff('D', GUICtrlRead($MonthCal_FROM), GUICtrlRead($MonthCal_TO))
				If $Days_between < 0 Then
					GUICtrlSetData($Label_DATA_OD, '!!! DO DNIA :')
					GUICtrlSetBkColor($Label_DATA_OD, 0xFF0000)
					GUICtrlSetData($Label_DATA_DO, '!!! DO DNIA :')
					GUICtrlSetBkColor($Label_DATA_DO, 0xFF0000)
				Else
					GUICtrlSetData($Label_DATA_OD, 'DO DNIA :')
					GUICtrlSetBkColor($Label_DATA_OD, 0x000000)
					GUICtrlSetData($Label_DATA_DO, 'DO DNIA :')
					GUICtrlSetBkColor($Label_DATA_DO, 0x000000)
					Local $a_wynik[2] = [GUICtrlRead($MonthCal_FROM), GUICtrlRead($MonthCal_TO)]
					If $bSQLDateFormat Then
						$a_wynik[0] = StringReplace($a_wynik[0], '/', '') & ' 00:00:00.001'
						$a_wynik[1] = StringReplace($a_wynik[1], '/', '') & ' 23:59:59.990'
					EndIf
					$vReturnValue = $a_wynik
					ExitLoop
				EndIf
			Case $idButton_Anuluj
				$vReturnValue = False
				ExitLoop
		EndSwitch
	WEnd
	GUIDelete($Form_date_from_to)
	AutoItSetOption("GUIOnEventMode", $v_GUIOnEventMode)

	If $vReturnValue = False Then _
			Return SetError(1, 0, $vReturnValue)
	Return $vReturnValue
EndFunc   ;==>_Data_OD_DO