List1

Value : 
AA F8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

default
default
STM32L151xE
Menu bar
Output Window
Output Window
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DataMemory.hex in DATA MEMORY area  ...
< File successfully loaded. File Checksum 0x1FC
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAServiceManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xE61D95
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAResetManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xACA71
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DisplayModule.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0x2075B13

Device Status Window
Device Status Window
PROJECT:
FileName: 3.0.3.stp

CONFIGURATION:
Hardware: ST-LINK
Programming mode: SWD
Device name: STM32L151xE
Port: USB

PROGRAM MEMORY status:
[0x8000000 - 0x807FFFF]
File: OTAServiceManager.hex Checksum: 0xE61D95
File: OTAResetManager.hex Checksum: 0xACA71
File: DisplayModule.hex Checksum: 0x2075B13
Not programmed
Memory checksum: 0x2F84319

DATA MEMORY status:
[0x8080000 - 0x8083FFF]
File: DataMemory.hex Checksum: 0x1FC
Not programmed
Memory checksum: 0x1FC

OPTION BYTE status:
No File
Not programmed
Option byte 0: AA
Option byte 1: F8
Option byte 2: 00
Option byte 3: 00
Option byte 4: 00
Option byte 5: 00
Option byte 6: 00
Option byte 7: 00
Option byte 8: 00
Option byte 9: 00
Option byte 10: 00
Option byte 11: 00
Option byte 12: 00
Option byte 13: 00
Option byte 14: 00
Option byte 15: 00
Option byte 16: 00
Option byte 17: 00
Memory checksum: 0x1A2








List1

Value : 
AA F8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

default
default
STM32L151xE
Menu bar
Output Window
Output Window
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DataMemory.hex in DATA MEMORY area  ...
< File successfully loaded. File Checksum 0x1FC
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAServiceManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xE61D95
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAResetManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xACA71
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DisplayModule.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0x2075B13

Device Status Window
Device Status Window
PROJECT:
FileName: 3.0.3.stp

CONFIGURATION:
Hardware: ST-LINK
Programming mode: SWD
Device name: STM32L151xE
Port: USB

PROGRAM MEMORY status:
[0x8000000 - 0x807FFFF]
File: OTAServiceManager.hex Checksum: 0xE61D95
File: OTAResetManager.hex Checksum: 0xACA71
File: DisplayModule.hex Checksum: 0x2075B13
Not programmed
Memory checksum: 0x2F84319

DATA MEMORY status:
[0x8080000 - 0x8083FFF]
File: DataMemory.hex Checksum: 0x1FC
Not programmed
Memory checksum: 0x1FC

OPTION BYTE status:
No File
Not programmed
Option byte 0: AA
Option byte 1: F8
Option byte 2: 00
Option byte 3: 00
Option byte 4: 00
Option byte 5: 00
Option byte 6: 00
Option byte 7: 00
Option byte 8: 00
Option byte 9: 00
Option byte 10: 00
Option byte 11: 00
Option byte 12: 00
Option byte 13: 00
Option byte 14: 00
Option byte 15: 00
Option byte 16: 00
Option byte 17: 00
Memory checksum: 0x1A2








List1

Value : 
AA F8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

default
default
STM32L151xE
Menu bar
Output Window
Output Window
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DataMemory.hex in DATA MEMORY area  ...
< File successfully loaded. File Checksum 0x1FC
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAServiceManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xE61D95
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAResetManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xACA71
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DisplayModule.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0x2075B13

Device Status Window
Device Status Window
PROJECT:
FileName: 3.0.3.stp

CONFIGURATION:
Hardware: ST-LINK
Programming mode: SWD
Device name: STM32L151xE
Port: USB

PROGRAM MEMORY status:
[0x8000000 - 0x807FFFF]
File: OTAServiceManager.hex Checksum: 0xE61D95
File: OTAResetManager.hex Checksum: 0xACA71
File: DisplayModule.hex Checksum: 0x2075B13
Not programmed
Memory checksum: 0x2F84319

DATA MEMORY status:
[0x8080000 - 0x8083FFF]
File: DataMemory.hex Checksum: 0x1FC
Not programmed
Memory checksum: 0x1FC

OPTION BYTE status:
No File
Not programmed
Option byte 0: AA
Option byte 1: F8
Option byte 2: 00
Option byte 3: 00
Option byte 4: 00
Option byte 5: 00
Option byte 6: 00
Option byte 7: 00
Option byte 8: 00
Option byte 9: 00
Option byte 10: 00
Option byte 11: 00
Option byte 12: 00
Option byte 13: 00
Option byte 14: 00
Option byte 15: 00
Option byte 16: 00
Option byte 17: 00
Memory checksum: 0x1A2








List1

Value : 
AA F8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

default
default
STM32L151xE
Menu bar
Output Window
Output Window
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DataMemory.hex in DATA MEMORY area  ...
< File successfully loaded. File Checksum 0x1FC
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAServiceManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xE61D95
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAResetManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xACA71
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DisplayModule.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0x2075B13

Device Status Window
Device Status Window
PROJECT:
FileName: 3.0.3.stp

CONFIGURATION:
Hardware: ST-LINK
Programming mode: SWD
Device name: STM32L151xE
Port: USB

PROGRAM MEMORY status:
[0x8000000 - 0x807FFFF]
File: OTAServiceManager.hex Checksum: 0xE61D95
File: OTAResetManager.hex Checksum: 0xACA71
File: DisplayModule.hex Checksum: 0x2075B13
Not programmed
Memory checksum: 0x2F84319

DATA MEMORY status:
[0x8080000 - 0x8083FFF]
File: DataMemory.hex Checksum: 0x1FC
Not programmed
Memory checksum: 0x1FC

OPTION BYTE status:
No File
Not programmed
Option byte 0: AA
Option byte 1: F8
Option byte 2: 00
Option byte 3: 00
Option byte 4: 00
Option byte 5: 00
Option byte 6: 00
Option byte 7: 00
Option byte 8: 00
Option byte 9: 00
Option byte 10: 00
Option byte 11: 00
Option byte 12: 00
Option byte 13: 00
Option byte 14: 00
Option byte 15: 00
Option byte 16: 00
Option byte 17: 00
Memory checksum: 0x1A2








List1

Value : 
AA F8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

default
default
STM32L151xE
Menu bar
Output Window
Output Window
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DataMemory.hex in DATA MEMORY area  ...
< File successfully loaded. File Checksum 0x1FC
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAServiceManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xE61D95
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAResetManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xACA71
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DisplayModule.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0x2075B13

Device Status Window
Device Status Window
PROJECT:
FileName: 3.0.3.stp

CONFIGURATION:
Hardware: ST-LINK
Programming mode: SWD
Device name: STM32L151xE
Port: USB

PROGRAM MEMORY status:
[0x8000000 - 0x807FFFF]
File: OTAServiceManager.hex Checksum: 0xE61D95
File: OTAResetManager.hex Checksum: 0xACA71
File: DisplayModule.hex Checksum: 0x2075B13
Not programmed
Memory checksum: 0x2F84319

DATA MEMORY status:
[0x8080000 - 0x8083FFF]
File: DataMemory.hex Checksum: 0x1FC
Not programmed
Memory checksum: 0x1FC

OPTION BYTE status:
No File
Not programmed
Option byte 0: AA
Option byte 1: F8
Option byte 2: 00
Option byte 3: 00
Option byte 4: 00
Option byte 5: 00
Option byte 6: 00
Option byte 7: 00
Option byte 8: 00
Option byte 9: 00
Option byte 10: 00
Option byte 11: 00
Option byte 12: 00
Option byte 13: 00
Option byte 14: 00
Option byte 15: 00
Option byte 16: 00
Option byte 17: 00
Memory checksum: 0x1A2








List1

Value : 
AA F8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

default
default
STM32L151xE
Menu bar
Output Window
Output Window
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DataMemory.hex in DATA MEMORY area  ...
< File successfully loaded. File Checksum 0x1FC
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAServiceManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xE61D95
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAResetManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xACA71
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DisplayModule.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0x2075B13

Device Status Window
Device Status Window
PROJECT:
FileName: 3.0.3.stp

CONFIGURATION:
Hardware: ST-LINK
Programming mode: SWD
Device name: STM32L151xE
Port: USB

PROGRAM MEMORY status:
[0x8000000 - 0x807FFFF]
File: OTAServiceManager.hex Checksum: 0xE61D95
File: OTAResetManager.hex Checksum: 0xACA71
File: DisplayModule.hex Checksum: 0x2075B13
Not programmed
Memory checksum: 0x2F84319

DATA MEMORY status:
[0x8080000 - 0x8083FFF]
File: DataMemory.hex Checksum: 0x1FC
Not programmed
Memory checksum: 0x1FC

OPTION BYTE status:
No File
Not programmed
Option byte 0: AA
Option byte 1: F8
Option byte 2: 00
Option byte 3: 00
Option byte 4: 00
Option byte 5: 00
Option byte 6: 00
Option byte 7: 00
Option byte 8: 00
Option byte 9: 00
Option byte 10: 00
Option byte 11: 00
Option byte 12: 00
Option byte 13: 00
Option byte 14: 00
Option byte 15: 00
Option byte 16: 00
Option byte 17: 00
Memory checksum: 0x1A2








List1

Value : 
AA F8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

default
default
STM32L151xE
Menu bar
Output Window
Output Window
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DataMemory.hex in DATA MEMORY area  ...
< File successfully loaded. File Checksum 0x1FC
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAServiceManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xE61D95
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAResetManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xACA71
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DisplayModule.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0x2075B13

Device Status Window
Device Status Window
PROJECT:
FileName: 3.0.3.stp

CONFIGURATION:
Hardware: ST-LINK
Programming mode: SWD
Device name: STM32L151xE
Port: USB

PROGRAM MEMORY status:
[0x8000000 - 0x807FFFF]
File: OTAServiceManager.hex Checksum: 0xE61D95
File: OTAResetManager.hex Checksum: 0xACA71
File: DisplayModule.hex Checksum: 0x2075B13
Not programmed
Memory checksum: 0x2F84319

DATA MEMORY status:
[0x8080000 - 0x8083FFF]
File: DataMemory.hex Checksum: 0x1FC
Not programmed
Memory checksum: 0x1FC

OPTION BYTE status:
No File
Not programmed
Option byte 0: AA
Option byte 1: F8
Option byte 2: 00
Option byte 3: 00
Option byte 4: 00
Option byte 5: 00
Option byte 6: 00
Option byte 7: 00
Option byte 8: 00
Option byte 9: 00
Option byte 10: 00
Option byte 11: 00
Option byte 12: 00
Option byte 13: 00
Option byte 14: 00
Option byte 15: 00
Option byte 16: 00
Option byte 17: 00
Memory checksum: 0x1A2








List1

Value : 
AA F8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

default
default
STM32L151xE
Menu bar
Output Window
Output Window
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
Hardware configuration set to <ST-LINK on USB with STM32L151xE plugged in and SWD protocol>.
Blank check before programming (when available) is OFF
Verify after programming is ON.
Clear memory before loading a file is ON.
Erase device memory before programming (when available) is OFF
Display a popup window when an error occurs is ON.
Log activity is OFF
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DataMemory.hex in DATA MEMORY area  ...
< File successfully loaded. File Checksum 0x1FC
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAServiceManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xE61D95
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\OTAResetManager.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0xACA71
> Loading file C:\Users\shreyak2\Desktop\DM stvp projects\3.0.3_new\3.0.3_new\DisplayModule.hex in PROGRAM MEMORY area  ...
< File successfully loaded. File Checksum 0x2075B13

Device Status Window
Device Status Window
PROJECT:
FileName: 3.0.3.stp

CONFIGURATION:
Hardware: ST-LINK
Programming mode: SWD
Device name: STM32L151xE
Port: USB

PROGRAM MEMORY status:
[0x8000000 - 0x807FFFF]
File: OTAServiceManager.hex Checksum: 0xE61D95
File: OTAResetManager.hex Checksum: 0xACA71
File: DisplayModule.hex Checksum: 0x2075B13
Not programmed
Memory checksum: 0x2F84319

DATA MEMORY status:
[0x8080000 - 0x8083FFF]
File: DataMemory.hex Checksum: 0x1FC
Not programmed
Memory checksum: 0x1FC

OPTION BYTE status:
No File
Not programmed
Option byte 0: AA
Option byte 1: F8
Option byte 2: 00
Option byte 3: 00
Option byte 4: 00
Option byte 5: 00
Option byte 6: 00
Option byte 7: 00
Option byte 8: 00
Option byte 9: 00
Option byte 10: 00
Option byte 11: 00
Option byte 12: 00
Option byte 13: 00
Option byte 14: 00
Option byte 15: 00
Option byte 16: 00
Option byte 17: 00
Memory checksum: 0x1A2