Smtp Mailer That Supports Html And Attachments.

[Jos]

expandcollapse popup

;
;##################################
; Include
;##################################
#Include<file.au3>
;##################################
; Variables
;##################################
$SmtpServer = "MailServer"              ; address for the smtp-server to use - REQUIRED
$FromName = "Name"                      ; name from who the email was sent
$FromAddress = "your@Email.Address.com" ; address from where the mail should come
$ToAddress = "your@Email.Address.com"   ; destination address of the email - REQUIRED
$Subject = "Userinfo"                   ; subject from the email - can be anything you want it to be
$Body = ""                              ; the messagebody from the mail - can be left blank but then you get a blank mail
$AttachFiles = ""                       ; the file(s) you want to attach seperated with a ; (Semicolon) - leave blank if not needed
$CcAddress = "CCadress1@test.com"       ; address for cc - leave blank if not needed
$BccAddress = "BCCadress1@test.com"     ; address for bcc - leave blank if not needed
$Importance = "Normal"                  ; Send message priority: "High", "Normal", "Low"
$Username = "******"                    ; username for the account used from where the mail gets sent - REQUIRED
$Password = "********"                  ; password for the account used from where the mail gets sent - REQUIRED
$IPPort = 25                            ; port used for sending the mail
$ssl = 0                                ; enables/disables secure socket layer sending - put to 1 if using httpS
$tls = 0                                ; enables/disables TLS when required
;~ $SmtpServer = "smtp.gmail.com"       ; GMAIL address for the smtp-server to use - REQUIRED
;~ $IPPort=465                          ; GMAIL port used for sending the mail
;~ $ssl=1                               ; GMAIL enables/disables secure socket layer sending - put to 1 if using https
;~ $SmtpServer = "smtp.office365.com"   ; O365 address for the smtp-server to use - REQUIRED
;~ $IPPort=25                           ; O365 port used for sending the mail
;~ $ssl=1                               ; O365 enables/disables secure socket layer sending - put to 1 if using https
;~ SmtpServer = "smtp.mail.yahoo.com"   ; Yahoo address for the smtp-server to use - REQUIRED
;~ $IPPort = 465                        ; Yahoo port used for sending the mail
;~ $ssl = 1                             ; Yahoo enables/disables secure socket layer sending - put to 1 if using https
;##################################
; Script
;##################################
Global $oMyRet[2]
Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")
$rc = _INetSmtpMailCom($SmtpServer, $FromName, $FromAddress, $ToAddress, $Subject, $Body, $AttachFiles, $CcAddress, $BccAddress, $Importance, $Username, $Password, $IPPort, $ssl, $tls)
If @error Then
    MsgBox(0, "Error sending message", "Error code:" & @error & "  Description:" & $rc)
EndIf
;
; The UDF
Func _INetSmtpMailCom($s_SmtpServer, $s_FromName, $s_FromAddress, $s_ToAddress, $s_Subject = "", $as_Body = "", $s_AttachFiles = "", $s_CcAddress = "", $s_BccAddress = "", $s_Importance="Normal", $s_Username = "", $s_Password = "", $IPPort = 25, $ssl = 0, $tls = 0)
    Local $objEmail = ObjCreate("CDO.Message")
    $objEmail.From = '"' & $s_FromName & '" <' & $s_FromAddress & '>'
    $objEmail.To = $s_ToAddress
    Local $i_Error = 0
    Local $i_Error_desciption = ""
    If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress
    If $s_BccAddress <> "" Then $objEmail.Bcc = $s_BccAddress
    $objEmail.Subject = $s_Subject
    If StringInStr($as_Body, "<") And StringInStr($as_Body, ">") Then
        $objEmail.HTMLBody = $as_Body
    Else
        $objEmail.Textbody = $as_Body & @CRLF
    EndIf
    If $s_AttachFiles <> "" Then
        Local $S_Files2Attach = StringSplit($s_AttachFiles, ";")
        For $x = 1 To $S_Files2Attach[0]
            $S_Files2Attach[$x] = _PathFull($S_Files2Attach[$x])
;~          ConsoleWrite('@@ Debug : $S_Files2Attach[$x] = ' & $S_Files2Attach[$x] & @LF & '>Error code: ' & @error & @LF) ;### Debug Console
            If FileExists($S_Files2Attach[$x]) Then
                ConsoleWrite('+> File attachment added: ' & $S_Files2Attach[$x] & @LF)
                $objEmail.AddAttachment($S_Files2Attach[$x])
            Else
                ConsoleWrite('!> File not found to attach: ' & $S_Files2Attach[$x] & @LF)
                SetError(1)
                Return 0
            EndIf
        Next
    EndIf
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = $s_SmtpServer
    If Number($IPPort) = 0 then $IPPort = 25
    $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = $IPPort
    ;Authenticated SMTP
    If $s_Username <> "" Then
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusername") = $s_Username
        $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendpassword") = $s_Password
    EndIf
    ; Set security params
    If $ssl Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = True
    If $tls Then $objEmail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendtls") = True
    ;Update settings
    $objEmail.Configuration.Fields.Update
    ; Set Email Importance
    Switch $s_Importance
        Case "High"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "High"
        Case "Normal"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Normal"
        Case "Low"
            $objEmail.Fields.Item ("urn:schemas:mailheader:Importance") = "Low"
    EndSwitch
    $objEmail.Fields.Update
    ; Sent the Message
    $objEmail.Send
    If @error Then
        SetError(2)
        Return $oMyRet[1]
    EndIf
    $objEmail=""
EndFunc   ;==>_INetSmtpMailCom
;
;
; Com Error Handler
Func MyErrFunc()
    $HexNumber = Hex($oMyError.number, 8)
    $oMyRet[0] = $HexNumber
    $oMyRet[1] = StringStripWS($oMyError.description, 3)
    ConsoleWrite("### COM Error !  Number: " & $HexNumber & "   ScriptLine: " & $oMyError.scriptline & "   Description:" & $oMyRet[1] & @LF)
    SetError(1); something to check for when this function returns
    Return
EndFunc   ;==>MyErrFunc

Edit: Fixed Bcc ...

Edit: Added support for different port and SLL which are used by GMail (Port 465)

Edit: Added Importance support (10/2008)

EDIT: Added $TLS option (07/2020

Some interesting Info from  the thread:

On 11/8/2020 at 3:03 AM, Zedna said:

Adding a MailHeader: 

$objEmail.Fields("urn:schemas:mailheader:x-mailer") = "My application Name or whatever else"

and here is the way how to set "code page" (here Czech) :
this is important when you have chars with diacritics (special non-english letters) in your email

$objEmail.BodyPart.ContentTransferEncoding = "8bit"
$objEmail.BodyPart.CharSet = "windows-1250"

 

Edited May 22 by Jos

[rakudave]

nicenicenice!!!!

[Mosquitos]

Works very good; Thanks

I tested with exe,doc,txt and au3 files and it works.

I changed this in the script:

$DefaultSmtpServer = RegRead("HKCU\Software\Microsoft\Internet Account Manager\Accounts\00000001", "SMTP Server")

$rc = _INetSmtpMailCom($DefaultSmtpServer , "Your Name", "your@Email.Address.com", "CCadress1@test.com;CCadress2@test.com", "Test Subject", "Test <b>Body</b>", "test.au3;test3.au3")

[slipperylobster]

i use ypops and enter my server as 127.0.0.1 (localhost) this usually works in my other programs. I get a failure to login error after AUTH Login is sent to me. Any ideas? Ypops uses localhost to access yahoo mail accts.

The error reads: error code 2: message could not be sent to the smtp server. the transport error code was 0x80040217

thanks.

[gcriaco]

Works very fine.

Thanks a lot

[Jos]

i use ypops and enter my server as 127.0.0.1 (localhost) this usually works in my other programs. I get a failure to login error after AUTH Login is sent to me. Any ideas? Ypops uses localhost to access yahoo mail accts.

The error reads: error code 2: message could not be sent to the smtp server. the transport error code was 0x80040217

thanks.

I don't know if a proxy program will work with this COM object... you will have to do some reseach on it..

[lte5000]

Com error:80020009

Error sending message, error code:2 Description:The message could not be sent to the SMTP server. The transport error code was 0x800ccc61. The server response was 560 See http://pobox.com/~djb/docs/smtplf.html.

I think maybe you should change

$objEmail.Textbody = $as_Body & @LF

to

$objEmail.Textbody = $as_Body & @CRLF

Thanks for the UDF.

Edited April 2, 2006 by lte5000

[Jos]

I think maybe you should change

$objEmail.Textbody = $as_Body & @LF

to

$objEmail.Textbody = $as_Body & @CRLF

Thanks for the UDF.

I haven't had problems yet but have updated the original post with UDF.

[mille]

Hi,

Error compile at :

Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")

and

$objEmail = ObjCreate("CDO.Message")

Iam using v3.1.1, why?? help me please!!

THanks so much.

[Mosquitos]

Hi,

Error compile at :

and

Iam using v3.1.1, why?? help me please!!

THanks so much.

You need the beta Beta

[nfwu]

Beta is required...

Links:http://www.autoitscript.com/autoit3/files/beta/autoit/

#)

Edited April 12, 2006 by nfwu

[mille]

hi, everyone

Thanks for your replies

When run my scipt it maybe error at:

Error code:1 Description:0

THis is my code

Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")

$rc = _INetSmtpMailCom("smtp.mail.yahoo.com" , "Tran Duc", "tranducmille@yahoo.com", "", "Test Subject", "Test

<b>Body</b>", "test.au3;test3.au3")

Is there any problems about my code?

Thanks so much.

[samtree]

I LOVE YOU!!!

I have been trying to do this for SOO long!!!

[mille]

HI every people!

Please, Could you help me for send mail, it incorrect with my account, yahoo smtp...

Global $oMyError = ObjEvent("AutoIt.Error", "MyErrFunc")

$rc = _INetSmtpMailCom("smtp.mail.yahoo.com" , "Tran Duc", "tranducmille@yahoo.com", "", "Test Subject", "Test

<b>Body</b>", "test.au3;test3.au3")

Thanks so much!

[kmps]

this script is great,I had sent email with my SOHU mail server.thank you very very much!

[Zedna]

I'm using CDO.Message for sending SMTP mails on WINXP too, thank you JdeB for that idea

I want only say here for others: It's not working on WIN98 there isn't CDO.Message object/DLL.

[poisonkiller]

What is hotmail SMPT address?

[dnsi]

can you make it like a lib?

[VernV3]

Hi, good job.

You might want to change the following:

If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress

If $s_BccAddress <> "" Then $objEmail.Cc = $s_BccAddress

to

If $s_CcAddress <> "" Then $objEmail.Cc = $s_CcAddress

If $s_BccAddress <> "" Then $objEmail.BCc = $s_BccAddress

Also, here are a couple of links to the MSDN site for further research on the CDO.Message object for anyone interested:

IMessage Interface

http://msdn.microsoft.com/library/default....e_interface.asp

Message CoClass

http://msdn.microsoft.com/library/default....age_coclass.asp

CDO: Part I

http://msdn.microsoft.com/library/default....ml/cDOpart1.asp

[Misha]

Hi guys when I tried to use the code I had error

$ObjEmail.Send

$ObjEmail.Send^ERROR

Error: The requested action with this object has failed.

PS.Sorry to rise up all threads.